How much does HVAC cost in Minneapolis?
By Our research team · Last verified · Methodology
Most Minneapolis homeowners pay $3,900–$8,800 to replace a central AC on existing ducts (3 tons, installed). Typical is $6,100, in line with the US typical. Replacing the furnace too brings it to $6,450–$15,800.
How we get this data- Typical
- $6,100
- Low end
- $2,950
- High end
- $13,300
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local HVAC contractors send you a real quote. Free, no obligation.
Get my fair quote →The typical Minneapolis price is $6,100, in line with the US typical of $6,200.
Minneapolis's price band
Minneapolis is pricier than 74% of the 195 US metros we price for HVAC work.
Expect $3,900–$8,800 for a new 3-ton central AC in Minneapolis and $6,100 for a typical job. Homes without ducts usually go ductless: $4,450–$9,900 for two zones and $7,900–$17,800 for four.
Minneapolis winters are long and cold, so furnaces are sized large and any heat pump needs to be a cold-climate model with backup heat.
These are installed prices for Minneapolis, re-verified in November 2026. Removal and startup are normally included; the permit, a new line set and duct repairs often are not. Get them itemized.
Comparing cities, or after the US-wide picture? See the national guide: HVAC cost in the USA.
$3,900–$8,800 to replace a 3-ton central AC on existing ducts in Minneapolis, installed — $6,100 typical. A heat pump runs $5,450–$12,350, a gas furnace $2,750–$7,900, and AC + furnace together $6,450–$15,800. Verified November 2026. Get free Minneapolis quotes →
- 3-ton central AC on existing ducts: $3,900–$8,800 ($6,100 typical)
- Heat pump, 3-ton: $5,450–$12,350; gas furnace: $2,750–$7,900
- AC + furnace together: $6,450–$15,800
- Mini-split: $2,450–$5,550 for one 12,000 BTU zone, $7,900–$17,800 for four
- Downtown, North Loop & Northeast runs 5–10% above the city average; South Minneapolis & Uptown: standard pricing
Prices verified November 2026 · Cross-referenced against 45+ American pricing sources · See methodology
Installed prices for the Minneapolis metro, re-verified November 2026. Equipment-heavy jobs move less with local labor costs than service calls do.
| Service | Low | Typical | High |
|---|---|---|---|
| Central AC replacement, 3-ton (existing ducts)installed | $3,900installed | $6,100 | $8,800 |
| Central AC + gas furnace, replaced togetherinstalled | $6,450installed | $9,700 | $15,800 |
| Heat pump replacement, 3-ton (existing ducts)installed | $5,450installed | $7,900 | $12,350 |
| Central heat pump, high-efficiency with zoning (3-ton)installed | $9,900installed | $14,350 | $20,750 |
| Gas furnace replacement (80–96% AFUE)installed | $2,750installed | $4,550 | $7,900 |
| Ductless mini-split, 1 zone, 9,000 BTUinstalled | $2,200installed | $3,250 | $4,750 |
| Ductless mini-split, 1 zone, 12,000 BTUinstalled | $2,450installed | $3,850 | $5,550 |
| Ductless mini-split, 1 zone, 18,000 BTUinstalled | $3,150installed | $4,950 | $7,100 |
| Ductless mini-split, 1 zone, 24,000 BTUinstalled | $3,750installed | $6,150 | $8,700 |
| Ductless mini-split, 1 zone, 30,000–36,000 BTUinstalled | $4,750installed | $7,700 | $11,350 |
| Multi-zone mini-split, 2 zonesinstalled | $4,450installed | $6,450 | $9,900 |
| Multi-zone mini-split, 4 zonesinstalled | $7,900installed | $11,850 | $17,800 |
| Like-for-like AC swap: same-size mini-split, existing line setinstalled | $2,250installed | $3,450 | $5,150 |
| Install only: homeowner-supplied mini-split, 1 zonelabor only | $490labor only | $1,100 | $1,950 |
| Evaporative (swamp) cooler, roof-mountedinstalled | $1,300installed | $2,250 | $3,550 |
| Ductwork replacement, whole houseinstalled | $2,450installed | $5,450 | $9,400 |
| AC compressor replacement (out of warranty)per repair | $1,300per repair | $2,100 | $2,950 |
| AC repair, major: refrigerant leak fix + rechargeper repair | $590per repair | $1,300 | $2,450 |
| AC repair, minor: capacitor, contactor or drain lineper repair | $150per repair | $300 | $590 |
| AC tune-upper visit | $75per visit | $110 | $200 |
| Whole-system HVAC tune-up (AC + furnace)per year | $150per year | $230 | $440 |
| Duct cleaning, whole houseper home | $300per home | $440 | $690 |
| Smart thermostat, installedinstalled | $200installed | $300 | $450 |
| Old AC or furnace removal and disposalper unit | $100per unit | $250 | $490 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local HVAC contractors in Minneapolis
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need a price on?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the HVAC contractors who reply.
Where should they text you?
- Max 2 HVAC contractors. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched HVAC contractors see your number.
By continuing, you agree to our Terms and to up to 2 HVAC contractors contacting you by phone or text.
Check your phone
Prices verified November 2026 · Cross-referenced against 45+ American pricing sources · See methodology
Figures are for the Minneapolis metro area in November 2026. Rural edges may add trip fees; Downtown, North Loop & Northeast sits at the top of these ranges.
HVAC prices across Minneapolis
Where you live changes the quote. Downtown, North Loop & Northeast costs the most because of access and older buildings; South Minneapolis & Uptown usually comes in at or under the city typical.
Downtown, North Loop & Northeast
- Installed
- $4,100–$9,700 installed
- Typical job
- $5,750–$7,700 / 3-ton AC swap
Condos, row houses and older buildings. Condensers often sit on roofs or in tight side yards, and paid parking, freight elevators and building rules all add labor.
North Minneapolis
- Installed
- $4,000–$9,250 installed
- Typical job
- $5,600–$7,350 / 3-ton AC swap
Renovated older homes. Contractors here often find leaky ducts or a tired air handler or furnace, which is where a simple AC quote grows.
South Minneapolis & Uptown
- Installed
- $3,900–$8,800 installed
- Typical job
- $5,500–$7,000 / 3-ton AC swap
Mostly houses with central systems in garages, closets, attics or basements. Quotes cluster around the city typical.
St. Paul & the suburbs
- Installed
- $3,900–$9,350 installed
- Typical job
- $5,500–$7,450 / 3-ton AC swap
Bigger homes with garages and attics. Many need 4 to 5 tons or two systems, and attic air handlers take longer to swap than ones in a garage or closet.
Real-world HVAC costs in Minneapolis
Here's what common HVAC jobs cost in Minneapolis in 2026, a 3-ton central AC replacement on existing ducts, installed.
Swap a 3-ton AC on good ducts
Same spot, same size, matched indoor coil, old unit hauled away. Most Minneapolis jobs land near $6,100; a 17+ SEER2 unit adds about $2,050.
Replace the AC and gas furnace together
The usual move when both are 15+ years old. One install, one warranty, a matched system. Typical is $9,700.
Switch from AC + furnace to a heat pump
A 3-ton heat pump on existing ducts, typically $7,900. Keeping the furnace as backup (dual-fuel) runs $7,000–$16,800.
Cool one room with a mini-split
A 12,000 BTU single-zone mini-split for a bedroom, office or addition, typically $3,850. A 9,000 BTU unit for a small room is $2,200–$4,750.
Cool a whole home with no ducts
A 4-zone ductless system, typically $11,850. Adding ducts for central AC instead costs $2,450–$9,400 before the equipment.
How much does HVAC cost in Minneapolis?
A typical 3-ton replacement in Minneapolis is $6,100, inside a normal range of $3,900–$8,800. That price is in line with the US typical. Most of the difference between quotes is efficiency, brand and how hard the old equipment is to reach.
If the furnace is old too, doing both at once ($6,450–$15,800) usually costs less than two separate jobs. A 3-ton heat pump that heats and cools runs $5,450–$12,350, and a high-efficiency zoned heat pump $9,900–$20,750.
Central AC, heat pump and furnace prices in Minneapolis (2026)
A 3-ton central AC runs $3,900–$8,800, a 3-ton heat pump $5,450–$12,350, and a gas furnace $2,750–$7,900, all installed.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Central AC replacement, 3-ton (existing ducts) | $3,900 | $6,100 | $8,800 |
| Heat pump, 3-ton (existing ducts) | $5,450 | $7,900 | $12,350 |
| Gas furnace (80–96% AFUE) | $2,750 | $4,550 | $7,900 |
| Central AC + gas furnace together | $6,450 | $9,700 | $15,800 |
| Mini-split, 1 zone, 12,000 BTU | $2,450 | $3,850 | $5,550 |
| Mini-split, 2 zones | $4,450 | $6,450 | $9,900 |
| Mini-split, 4 zones | $7,900 | $11,850 | $17,800 |
| Ductwork replacement, whole house | $2,450 | $5,450 | $9,400 |
AC or heat pump in Minneapolis? A heat pump costs about $1,800 more than a 3-ton AC at the typical price, but it also replaces your heating. If your furnace is old, compare a heat pump with the $9,700 AC + furnace swap, not with the AC alone.
What moves an HVAC quote in Minneapolis:
- Size: a 2-ton system runs about $5,100 and a 5-ton about $8,550 at the typical price. Ask for a Manual J load calculation.
- Efficiency: the minimum here is 13.4 SEER2; a 17+ SEER2 two-stage unit adds about $2,050.
- Access: attic air handlers, rooftop condensers and tight closets add labor, most often in Downtown, North Loop & Northeast.
- Line set and coil: a new line set runs $200–$640, and the indoor coil has to match the new refrigerant.
- Season: spring and fall bring the best prices; a breakdown during a summer heat wave brings the worst.
Ask every Minneapolis contractor for the same things: tonnage, SEER2 rating, model numbers for both the outdoor and indoor units, and whether the permit and line set are included. Compare those, not just the total. Get a quote for your heating and cooling work →
HVAC cost in Minneapolis by home size
About $5,500 for a 2.5-ton AC (1,000–1,600 sq ft), $6,100 for 3 tons (1,600–2,000 sq ft), and $7,550–$8,550 for 4–5 tons in homes over 2,500 sq ft, typical Minneapolis prices on existing ducts.
Worked example: a 2,000 sq ft Minneapolis home with a 16-year-old AC and furnace. Replacing both runs about $9,700; switching to a 3-ton heat pump on the same ducts runs about $7,900; replacing only the AC is $6,100 but leaves an old furnace in place.
Homes over 2,500 sq ft or with two floors often have two systems or zoning. A high-efficiency zoned heat pump runs $9,900–$20,750, and adding zoning to an existing system $1,700–$4,450.
Minneapolis HVAC costs by system type
| System type | Cost | Best for |
|---|---|---|
| Central AC, 3-ton (existing ducts) | $3,900–$8,800 installed | Homes with sound ducts and a furnace or air handler to pair with |
| Ductless mini-split, single zone (9,000–18,000 BTU) | $2,200–$7,100 installed | One room, an addition, or a home with no ducts |
| Multi-zone ductless mini-split (2–4 zones) | $4,450–$17,800 installed | Whole homes with no ducts, room-by-room control |
| Heat pump, 3-ton ducted (heats and cools) | $5,450–$12,350 installed | Mild and hot climates; replacing an AC and electric heat |
| Gas furnace + AC, replaced together | $6,450–$15,800 installed | Cold climates with natural gas and old equipment on both sides |
| Gas furnace only (80–96% AFUE) | $2,750–$7,900 installed | When the AC is newer than the furnace |
| Dual-fuel: heat pump + gas furnace | $7,000–$16,800 installed | Cold climates: electric heat most days, gas on the coldest |
| Cold-climate heat pump, 3-ton ducted | $9,400–$23,750 installed | Northern homes leaving gas, oil or propane |
| Central heat pump, high-efficiency with zoning | $9,900–$20,750 installed | Big or two-story homes with hot and cold rooms |
| Evaporative (swamp) cooler, roof-mounted | $1,300–$3,550 installed | Dry Western climates only |
| Geothermal heat pump (ground loop) | $14,850–$34,600 installed | Large lots and long stays in one home |
| Window or through-the-wall AC | $210–$1,200 installed | Single rooms and renters; cheapest way to cool |
Equipment vs installation: the Minneapolis AC bill
On a typical $6,100 3-ton swap in Minneapolis, the condenser and matched coil are roughly $2,450–$3,650 and the rest is labor, materials, the permit and overhead. Labor usually makes up 40–60% of an AC replacement.
Buying the unit yourself rarely saves much: many contractors won't install customer-supplied equipment, and the ones who do charge $490–$1,950 or more for a mini-split and won't cover the parts. Brand warranties often require a licensed installer.
What's included in a Minneapolis AC replacement (and what costs extra)
A standard replacement quote covers the outdoor unit, a matched indoor coil, refrigerant, connection to your existing ducts and wiring, removal of the old unit, and startup. Common extras:
- Permit and inspection: $100–$250, often built into the quote
- New refrigerant line set: $200–$640 if the old one can't be reused
- New condenser pad: $40–$250
- Electrical panel upgrade: $840–$3,950, mostly when adding a heat pump or more capacity
Ask for the AHRI certificate showing the matched rating of your outdoor and indoor units. It proves the system you paid for is the one that was installed.
Climate and what it means here
Minneapolis winters are long and cold, so furnaces are sized large and any heat pump needs to be a cold-climate model with backup heat.
System size
Each ton adds equipment cost: about $5,100 for 2 tons and $7,550 for 4 tons at the typical Minneapolis price. A Manual J load calculation often shows a smaller system will do.
Efficiency rating
The federal minimum for a new split AC here is 13.4 SEER2. Higher ratings cost more upfront and pay back fastest where AC runs most of the year.
New refrigerants
New systems use A2L refrigerants (R-454B or R-32), so the indoor coil must match the outdoor unit. That's why condenser-only swaps are rare now, and why older R-410A systems cost more to service.
Ducts and access
Leaky or undersized ducts, attic air handlers and rooftop condensers add hours. Whole-house duct replacement runs $2,450–$9,400.
Location: Downtown, North Loop & Northeast vs South Minneapolis & Uptown
Downtown, North Loop & Northeast jobs cost more because of access, parking and older buildings. South Minneapolis & Uptown quotes usually sit at or a little under the city typical.
Season and urgency
Replacing on your schedule in spring or fall is cheaper than an emergency swap in a heat wave. After-hours repair labor runs $160–$250 an hour.
- Get three quotes for the same system.Same tonnage, same SEER2 rating, model numbers on every quote. Minneapolis quotes for the same 3-ton swap run anywhere from $3,900 to $8,800.
- Replace before it fails.If your system is 12–15+ years old, replace it in spring or fall. Emergency replacements in peak season leave no room to shop around.
- Right-size the system.Ask for a Manual J load calculation. An oversized AC costs more, cycles on and off, and leaves the house clammy.
- Check your utility for rebates.There is no federal tax credit for systems installed in 2026, but many utilities still pay rebates on efficient heat pumps and AC. Check before you sign; most require pre-approval or a listed contractor.
- Do the AC and furnace together if both are old.One install of both runs $6,450–$15,800, less than two separate jobs.
- Keep up with tune-ups.A yearly tune-up at $75–$200 catches weak capacitors and low refrigerant before they kill a compressor ($1,300–$2,950).
Before you pay a deposit to a Minneapolis HVAC contractor, get these in writing:
- Tonnage and how it was sized (a Manual J load calculation)
- Model numbers for the outdoor unit and the indoor coil or air handler
- The matched SEER2 (and HSPF2 for a heat pump) rating
- Whether the line set is new, flushed or reused
- Permit, inspection and removal of the old unit
- Thermostat, pad, disconnect and any electrical work
- Parts and labor warranty terms, and who registers the equipment
- Total price, deposit, and start and finish dates
How much does it cost to replace a central AC in Minneapolis?
$3,900–$8,800 for a 3-ton system on existing ducts, installed, with $6,100 typical in Minneapolis. Higher-efficiency units, attic or rooftop installs and new line sets push it up.
How much does a heat pump cost in Minneapolis?
$5,450–$12,350 for a 3-ton heat pump on existing ducts, about $7,900 typical. A high-efficiency zoned system runs $9,900–$20,750.
How much is a new furnace in Minneapolis?
$2,750–$7,900 for a gas furnace installed, about $4,550 typical. With a new AC at the same time, $6,450–$15,800.
How much does a mini-split cost in Minneapolis?
$2,450–$5,550 for a 12,000 BTU single zone, $4,450–$9,900 for two zones and $7,900–$17,800 for four.
How much is an AC tune-up in Minneapolis?
$75–$200 per visit. A yearly plan for AC and furnace runs $150–$440.
How much does AC repair cost in Minneapolis?
$150–$590 for common fixes like a capacitor or contactor. A refrigerant leak repair with recharge runs $590–$2,450, and a compressor $1,300–$2,950.
What size AC does a Minneapolis home need?
As a rough guide, 2.5 tons covers about 1,000–1,600 sq ft and 3 tons about 1,600–2,000 sq ft, but insulation, windows and climate change that. Ask for a Manual J load calculation instead of matching the old unit.
Is there a tax credit for a new AC or heat pump in Minneapolis?
No federal one for 2026: the 25C credit covered improvements made through December 31, 2025. Utility and state rebates may still apply, so check before you buy.
Do I need a permit to replace an AC in Minneapolis?
Usually, yes. Most US cities and counties require a mechanical permit for an AC or furnace replacement, typically $100–$250, and a licensed contractor normally pulls it.
How much does it cost to add ducts in Minneapolis?
$2,450–$9,400 for whole-house ductwork, before the AC or heat pump. In many older homes a multi-zone mini-split ($7,900–$17,800 for four zones) costs less.
Prices verified November 2026 · Cross-referenced against 45+ American pricing sources · See methodology
Prices for the Minneapolis metro area, November 2026. Outer suburbs may vary.
Get a fair HVAC quote in Minneapolis
Local HVAC contractors · Free quotes · No obligation, no spam.