Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 19 trades · 195 US cities · 73+ sources For pros →
Get a fair quote
Cost guide

How much does sewer line replacement cost in Billings?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched13 min read
Sewer line cost

Sewer line costs in Billings

Billings, MTChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Billings, MT
$4,100–$14,900per job

Most Billings sewer line replacements cost $4,100–$14,900 for roughly 50 ft of new line, trenchless or dug. The typical Billings bill is $7,500, before any street or driveway restoration.

How we get this data
Typical
$7,500
Low end
$2,500
High end
$25,000
Full 50-ft replacement
$4,100–$14,900
Lining, per foot
$90–$250
Camera inspection
$130–$650
Spot repair
$1,000–$5,500

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local plumbers send you a real quote. Free, no obligation.

Get my fair quote →
Typical sewer line price: Billings vs nearby citiesTypical price, per job. The line marks the US typical.
Billings, MTThis guide $7,500
Missoula, MT $7,450
Ogden, UT $6,850
Cheyenne, WY $6,700
Boise, ID $6,500

The typical Billings price is $7,500, in line with the US typical of $7,500.

Where Billings sits among 195 US metrosNumber of metros at each typical sewer line price, per job.

Billings's price band

Billings is pricier than 64% of the 195 US metros we price for sewer line work.

Replacing a 50-ft sewer line in Billings runs $4,100–$14,900, with $7,500 typical. Trenchless lining is $90–$250 a foot, pipe bursting $60–$250 a foot and a traditional dig $50–$250 a foot. Many problems never need a new line: a camera inspection is $130–$650, and a spot repair is $1,000–$5,500.

The median plumber wage in the Billings metro is about $39.27 an hour (BLS, May 2025), 28% above the $30.67 US median. Labor isn't the whole story, though: depth, soil, permits and what sits on top of the pipe put the typical Billings replacement at $7,500, close to the $7,500 national typical.

Sewer work in Billings should be done by a licensed plumber or sewer contractor with a permit ($30–$1,000) and an inspection. Ask the city or sewer utility who owns the pipe under the sidewalk and street: if it's theirs, that part of the bill may not be yours.

Comparing cities, or after the US-wide picture? See the national guide: Sewer line cost in the USA.

Quick answer

$4,100–$14,900 to replace about 50 ft of sewer line in Billings, with $7,500 typical. Trenchless lining runs $90–$250 a foot, a spot repair $1,000–$5,500, and a camera inspection $130–$650. Verified November 2026. Get free Billings quotes →

  • Full 50-ft replacement: $4,100–$14,900 ($7,500 typical)
  • Trenchless lining $90–$250/ft, bursting $60–$250/ft, open trench $50–$250/ft
  • Camera inspection $130–$650; snaking a clogged main $130–$550
  • Spot repair of one section: $1,000–$5,500
  • Under a driveway or slab: $7,500–$25,000 with the concrete put back

Prices verified November 2026 · Cross-referenced against 56+ American pricing sources · See methodology

Detailed pricing — Sewer line cost in Billings 2026

Labor, pipe and basic yard restoration included unless the row says otherwise. Billings metro, re-verified November 2026. Permits and tap fees are set by the city.

ServiceLowTypicalHigh
Sewer camera inspectionper job$130per job$300$650
Main line snaking (cable auger through a cleanout)per job$130per job$300$550
Hydro-jetting the main lineper job$300per job$650$1,500
Tree root removal (root cutter, then flush the line)per job$150per job$400$1,000
Emergency call-out (nights, weekends, holidays)per job$150per job$250$400
Spot repair: dig up and fix one broken sectionper job$1,000per job$2,500$5,500
Point repair liner: no-dig patch over one bad sectionper job$1,200per job$2,200$3,500
Belly (sag) repair: dig up and re-lay a low sectionper job$1,500per job$3,500$7,500
Trenchless pipe lining (CIPP)per foot$90per foot$160$250
Pipe bursting (new pipe pulled through the old one)per foot$60per foot$150$250
Traditional dig and replace (open trench)per foot$50per foot$120$250
Sewer line replacement, about 50 ft (traditional dig or trenchless)per job$4,100per job$7,500$14,900
Replacement under a driveway or slab, about 50 ft (concrete restored)per job$7,500per job$12,500$25,000
Sidewalk or street cut and restoration (public right of way)per job$800per job$2,500$6,000
Sewer cleanout installation (outdoor, near the property line)per job$500per job$1,100$2,000
Backwater valve installation (outdoor inline at the low end; cut into a basement floor at the high end)per job$500per job$2,000$5,000
Septic-to-sewer conversion (hookup, old tank abandoned, permits)per job$3,000per job$7,000$15,000
City sewer tap or connection fee (new hookup)flat$400flat$2,000$15,000
Sewer permit and inspectionflat$30flat$250$1,000
Sewage backup cleanup (basement, per event)per job$1,000per job$2,500$5,000
Bigger sewer line jobs in Billings: what they costPer job, low to high with the typical price marked. Every line is in the table above.
Replacement under a driveway or slab, about 50 ft (concrete restored) $12,500$7,500–$25K
Sewer line replacement, about 50 ft (traditional dig or trenchless) $7,500$4,100–$14.9K
Septic-to-sewer conversion (hookup, old tank abandoned, permits) $7,000$3,000–$15K
Belly (sag) repair: dig up and re-lay a low section $3,500$1,500–$7,500
Spot repair: dig up and fix one broken section $2,500$1,000–$5,500
Sidewalk or street cut and restoration (public right of way) $2,500$800–$6,000
Sewage backup cleanup (basement, per event) $2,500$1,000–$5,000
Point repair liner: no-dig patch over one bad section $2,200$1,200–$3,500
Backwater valve installation (outdoor inline at the low end; cut into a basement floor at the high end) $2,000$500–$5,000
Smaller sewer line jobs and repairs in BillingsPer job, low to high with the typical price marked. Every line is in the table above.
Sewer cleanout installation (outdoor, near the property line) $1,100$500–$2,000
Hydro-jetting the main line $650$300–$1,500
Tree root removal (root cutter, then flush the line) $400$150–$1,000
Already got a quote?
Check it against these Billings prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local plumbers in Billings

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What's going on with your sewer line?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 56+ American pricing sources · See methodology

Prices are for the Billings metro: the city and its close suburbs. Dense blocks in Downtown Billings run higher; areas with more yard to work in, like Laurel, Lockwood & the Heights, usually run lower.

How sewer line costs vary across Billings

Sewer line prices across Billings

Where the house sits changes the job. Dense blocks in Downtown Billings mean more concrete, street cuts and tight access; areas like Laurel, Lockwood & the Heights usually have more yard to work in, which keeps digging cheaper.

Sewer line prices across BillingsTypical range by part of the metro, per job. The line marks the Billings typical.
Downtown Billings10–30% above the city typical $7,500–$13.2Kper job
South Side BillingsAround to 15% above typical $6,750–$11.7Kper job
West End & RimrockClose to typical $6,000–$10.2Kper job
Laurel, Lockwood & the Heights5–15% below typical $5,250–$9,400per job

Downtown Billings

10–30% above the city typical
Downtown, North Elevation, Yellowstone Art District
Per job
$7,500–$13,150 per job
Typical job
$260–$1,450 / clog cleared + camera

Downtown jobs cost more to set up: tight access, paid parking and more concrete to cut and patch. Trenchless methods pay off most here.

South Side Billings

Around to 15% above typical
South Side, South Park, Central Terrace
Per job
$6,750–$11,650 per job
Typical job
$250–$1,300 / clog cleared + camera

Prices here run near or a little above the city typical. If your house still has its original clay or cast iron line, get it filmed before you compare quotes; many old lines can be lined instead of dug up.

West End & Rimrock

Close to typical
West End, Rimrock, MSU Billings
Per job
$6,000–$10,150 per job
Typical job
$220–$1,200 / clog cleared + camera

If you own a rental near campus, ask for the camera video before you agree to a full replacement; tenant clogs are often the real problem.

Laurel, Lockwood & the Heights

5–15% below typical
Laurel, Lockwood, Billings Heights
Per job
$5,250–$9,400 per job
Typical job
$220–$1,200 / clog cleared + camera

Where homes have newer PVC lines, full replacements are rare; most calls are clogs, cleanout installs and backwater valves.

What you'll actually pay — job by job

Real-world sewer line costs in Billings

Here's what common sewer line jobs cost in Billings in 2026, labor, pipe and basic yard restoration included.

Slow drains or a backup: snake the main and film it

$260–$1,200

The most common call. Snaking through a cleanout runs $130–$550, and a camera pass after it $130–$650. At night or on a weekend the call-out alone is $150–$400.

Roots in an old clay line: cut, jet and keep it clear

$450–$2,500

A root cutter ($150–$1,000) plus a hydro-jet ($300–$1,500) clears most root problems. If the camera shows the pipe is still in one piece, a yearly jet can hold off a $7,500 replacement for years.

One broken or sagging section: spot repair

$1,000–$5,500

Digging one hole and replacing a few feet of pipe costs $1,000–$5,500. A no-dig point liner over the same spot runs $1,200–$3,500, and fixing a belly where the pipe has sagged $1,500–$7,500.

Whole line, about 50 ft: trenchless

$3,000–$12,500

Lining 50 ft runs $4,500–$12,500 and bursting $3,000–$12,500, usually in a day or two with one or two small pits. Ask whether the price includes the camera before and after, the permit and the cleanout.

Line under the driveway or slab

$7,500–$25,000

Concrete is what makes this expensive: $7,500–$25,000 for about 50 ft with the concrete put back. Bursting or lining from two pits usually costs less than cutting a full trench through the driveway.

How much does sewer line replacement cost in Billings?

Expect $7,500 for a typical 50-ft Billings sewer replacement, and anywhere from $4,100 to $14,900 depending on depth, pipe and what sits on top of it. Shallow lines under grass land at the low end; deep lines, concrete and street cuts push toward $14,900 and past it.

Most calls never get that far. A clogged main costs $130–$550 to snake or $300–$1,500 to hydro-jet, roots $150–$1,000 to cut out, and one broken section $1,000–$5,500 to dig and fix. Prices re-checked against 56 sources in November 2026.

Sewer line prices in Billings (2026) by job

A full 50-ft replacement runs $4,100–$14,900, trenchless lining of the same line $4,500–$12,500, and a camera inspection $130–$650.

Line on the quoteLowTypicalHigh
Sewer camera inspection$130$300$650
Main line snaking$130$300$550
Hydro-jetting the main line$300$650$1,500
Spot repair (one section)$1,000$2,500$5,500
Trenchless lining, 50 ft$4,500$8,000$12,500
Pipe bursting, 50 ft$3,000$7,500$12,500
Dig and replace, 50 ft (before restoration)$2,500$6,000$12,500
Under a driveway or slab, 50 ft$7,500$12,500$25,000

A $300 camera inspection is the cheapest line on this table and the one that decides the rest. It shows whether you need a $2,500 spot repair, a $2,200 point liner or a full $7,500 replacement.

What moves a sewer quote in Billings:

  • What's on top of the pipe: lawn is cheap to dig; a driveway or slab job runs $7,500–$25,000.
  • Depth: deeper lines need bigger holes, shoring and more hauling.
  • Pipe condition: a round, cracked pipe can be lined ($90–$250 a foot); a collapsed one has to be burst or dug.
  • Street and sidewalk: a cut in the public right of way adds $800–$6,000 plus city permits.
  • Length: about $4,700 for 25 ft, $7,500 for 50 ft and $13,150 for 100 ft at typical Billings prices.

Ask every Billings contractor for the same four things: the camera footage, the method and length, the permit and restoration they include, and the warranty. Compare those, not the per-foot headline. Get a quote for your sewer job →

Sewer line cost in Billings by length

Quick answer

A 25-ft run is about $2,550–$9,300, a 50-ft line $4,100–$14,900, and a 100-ft run $7,200–$26,100 in Billings, before driveway or street restoration.

Worked example: a 50-ft line lined from one cleanout at $160 a foot is $8,000, plus a $300 camera check and a $250 permit, for about $8,550. The same line dug under lawn at $120 a foot is $6,000 before restoration.

Pits, permits, the camera and set-up cost about the same for any length, which is why short runs cost more per foot. A 100-ft line at typical Billings prices is about $13,150, not twice the 50-ft price.

Billings sewer repair methods compared

Repair methodCostBest for
Trenchless pipe lining (CIPP)$4,500–$12,500 for 50 ftCracked or root-filled pipe that is still round and on grade
Trenchless pipe bursting$3,000–$12,500 for 50 ftBroken, collapsed or undersized pipe; new pipe can go one size up
Traditional dig and replace (open trench)$2,500–$12,500 for 50 ftShallow lines under lawn, sagging lines that need re-grading
Traditional dig, deep or under a driveway$7,500–$25,000 for 50 ftLines under concrete when trenchless can't be used
Spot repair (dig up one section)$1,000–$5,500 per repairOne break or bad joint in an otherwise sound line
Point repair liner (no dig, one section)$1,200–$3,500 per repairOne crack or joint under a driveway, tree or walkway
Belly repair (dig and re-grade a low spot)$1,500–$7,500 per repairA sag that holds water and keeps clogging
Hydro-jet and root cut (no repair)$450–$2,500 per visitRoots or grease in a pipe that is still in one piece
Cost by repair method in BillingsTypical range, for 50 ft.
Trenchless pipe lining (CIPP) $4,500–$12.5Kfor 50 ft
Trenchless pipe bursting $3,000–$12.5Kfor 50 ft
Traditional dig and replace (open trench) $2,500–$12.5Kfor 50 ft
Traditional dig, deep or under a driveway $7,500–$25Kfor 50 ft
Billings tip: ask for the camera footage marks with any quote. They show the exact distance to each break, so a second contractor can price a $2,500 spot repair instead of a $7,500 full line.

Per-foot price vs the full bill in Billings

A quote of $160 a foot for lining sounds simple, but 50 ft at that rate is $8,000 before the extras. Add the camera ($300) and the permit ($250) and the bill is about $8,550, before any access pit or cleanout. Compare whole-job prices, not per-foot rates.

Digging looks cheaper per foot ($50–$250), but restoration is extra: a sidewalk or street cut runs $800–$6,000, and a line under a driveway can reach $25,000. Trenchless costs more per foot and less to put back.

What's included in a Billings sewer line quote (and what costs extra)

A standard replacement quote covers the camera check, the digging or trenchless work, the new pipe, the connections at the house and the street side, and basic backfill and yard cleanup. It usually leaves out:

  • The permit and inspection: $30–$1,000, set by the city
  • Sidewalk or street restoration: $800–$6,000 when the line runs under public space
  • Driveway or slab concrete: part of why a line under concrete runs $7,500–$25,000
  • A new cleanout or backwater valve: $500–$2,000 and $500–$5,000

Ask for the warranty in writing, and a copy of the camera video from before and after the work.

What affects sewer line costs in Billings

Depth and frost

Depth depends on the slope from the house to the main and, in cold-winter cities, the frost line. Deeper trenches take longer and may need shoring. Deep lines push a 50-ft job toward $14,900.

What sits on top of the pipe

Lawn is the cheapest thing to dig through. A line under a driveway or slab runs $7,500–$25,000 in Billings because the concrete has to be cut out and poured again.

Pipe material and age

Clay joints let roots in, cast iron corrodes and scales inside, and Orangeburg fiber pipe, used through the 1970s, loses strength with age. Older pipe is more likely to need a full line than a spot fix.

Trenchless or dig

Lining runs $90–$250 a foot and bursting $60–$250, against $50–$250 for an open trench. Trenchless saves the yard, the driveway and the restoration bill.

Length of the run

Price scales with length: about $4,700 for a 25-ft run and $13,150 for 100 ft at typical Billings prices, because pits, permits and set-up cost the same either way.

Permits, street cuts and who owns the line

Permits run $30–$1,000. If the pipe crosses the sidewalk or street, a cut and restoration adds $800–$6,000, unless the city owns and fixes that part.

Local labor

Billings plumbers earn a median of about $39.27 an hour (BLS, May 2025), against $30.67 nationally. Depth, soil, permits and restoration matter as much as wages here: the typical Billings replacement is $7,500, close to the $7,500 national typical.

How to save money on sewer line work in Billings
  1. Get the camera video first.A $300 inspection shows where the problem is and how bad. Ask for the video file and the footage marks, and show them to a second contractor.
  2. Ask who owns the part under the street.Some cities fix the stretch under the sidewalk and street, or offer rebates and loans. One call to the sewer utility can take a big piece off the bill.
  3. Price a spot repair, not just a new line.If the camera shows one bad joint, a $1,000–$5,500 spot repair or a $1,200–$3,500 point liner may be all you need.
  4. Get trenchless and dig quotes side by side.Ask for both methods for the same length, with restoration included. Under concrete, trenchless usually wins; under open lawn, a dig can be cheaper.
  5. Don't wait for the emergency.An after-hours call-out adds $150–$400, and after-hours labor runs 1.5–3× the weekday rate. Book the camera and repair on a weekday when you can compare quotes.
  6. Keep roots back on a schedule.If roots are the only problem, a yearly hydro-jet ($650 typical) can buy years before a $7,500 replacement.
Sewer line cost in Billings: what the quote should include

Get these in writing from any Billings contractor before you pay a deposit:

  • The camera footage, with the distance to each problem marked
  • The method (lining, bursting or dig) and the exact length of pipe
  • Pipe material and size, and who handles the city connection
  • Permit, inspection and any right-of-way or street-cut fees
  • Restoration: lawn, sidewalk, driveway or street, and who does it
  • Access pits, cleanouts or a backwater valve if they're part of the job
  • Start date, days on site and what happens if they hit rock or water
  • The written warranty and a camera check after the work
Frequently asked questions — Sewer line cost in Billings
How much does it cost to replace a sewer line in Billings?

$4,100–$14,900 for about 50 ft, with $7,500 typical. Lines under a driveway or slab run $7,500–$25,000, and a single broken section can often be fixed for $1,000–$5,500.

How much does trenchless sewer repair cost in Billings?

Lining runs $90–$250 a foot, about $4,500–$12,500 for 50 ft. Pipe bursting runs $60–$250 a foot, about $3,000–$12,500 for 50 ft.

How much is a sewer camera inspection in Billings?

$130–$650, typically $300. It costs more if there's no cleanout and the plumber has to pull a toilet, or if the line has to be cleared first.

What does it cost to clear a main sewer line clog in Billings?

$130–$550 to snake it, or $300–$1,500 to hydro-jet it. Nights and weekends, expect a call-out of $150–$400.

How much does a sewer spot repair cost in Billings?

$1,000–$5,500 to dig up and replace one section. A no-dig point repair liner over the same spot costs $1,200–$3,500.

Is trenchless cheaper than digging in Billings?

Per foot, no: lining is $90–$250 against $50–$250 for an open trench. Overall it often is, because there's little or no concrete, sidewalk or landscaping to put back.

How much more does it cost if the sewer line is under my driveway?

About $7,500–$25,000 for 50 ft in Billings with the concrete restored, against $4,100–$14,900 under lawn. Bursting or lining from two small pits usually costs less than a full trench.

Who pays to fix the sewer line between my house and the street in Billings?

Usually the homeowner, at least to the property line and often all the way to the main. Some cities repair the part under the street or offer rebates, so call your sewer utility before work starts.

Do I need a permit to replace a sewer line in Billings?

Almost always. Expect $30–$1,000 for the permit and inspection, and more if the work crosses the sidewalk or street. A licensed contractor should pull it.

Does homeowners insurance cover sewer line replacement in Billings?

Usually not when the pipe fails from age, roots or wear. Separate sewer line warranty plans and policies exist, some offered through city partners; read the cap and exclusions before you count on one.

Prices verified November 2026 · Cross-referenced against 56+ American pricing sources · See methodology

Prices for the Billings metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates from national cost guides, contractor price pages, city fee schedules and BLS wage data. No contractor can pay to change them, so always get two or three quotes after a camera inspection. Last reviewed November 2026. Read our full methodology →

Get a fair sewer line quote in Billings

Local plumbers · Free quotes · No obligation, no spam.

Get quotes in Billings →Max 2 plumbers will contact you
Get quotes in BillingsMax 2 plumbers · free · no spam→