Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 19 trades · 195 US cities · 73+ sources For pros →
Get a fair quote
Cost guide

How much does sewer line replacement cost in Lexington?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched14 min read
Sewer line cost

Sewer line costs in Lexington

Lexington, KYChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Lexington, KY
$3,650–$13,350per job

Most Lexington sewer line replacements cost $3,650–$13,350 to replace about 50 ft of pipe from the house to the city sewer. Expect $6,700 for a typical job; clearing a clog instead runs $110–$1,450.

How we get this data
Typical
$6,700
Low end
$2,250
High end
$22,350
Full 50-ft replacement
$3,650–$13,350
Lining, per foot
$85–$240
Camera inspection
$110–$620
Spot repair
$910–$5,250

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local plumbers send you a real quote. Free, no obligation.

Get my fair quote →
Typical sewer line price: Lexington vs nearby citiesTypical price, per job. The line marks the US typical.
Columbus, OH $7,650
Knoxville, TN $7,000
Dayton, OH $6,750
Lexington, KYThis guide $6,700

The typical Lexington price is $6,700, 11% below the US typical of $7,500.

Where Lexington sits among 195 US metrosNumber of metros at each typical sewer line price, per job.

Lexington's price band

Lexington is cheaper than 68% of the 195 US metros we price for sewer line work.

Replacing a 50-ft sewer line in Lexington runs $3,650–$13,350, with $6,700 typical. Trenchless lining is $85–$240 a foot, pipe bursting $55–$240 a foot and a traditional dig $45–$240 a foot. Many problems never need a new line: a camera inspection is $110–$620, and a spot repair is $910–$5,250.

Lexington-area plumbers earn a median of about $29.75 an hour (BLS, May 2025), 3% below the US median of $30.67. Wages don't set the price alone: local depth, soil, permit rules and restoration put a typical 50-ft replacement here at $6,700, against $7,500 nationally.

Sewer work in Lexington should be done by a licensed plumber or sewer contractor with a permit ($30–$1,000) and an inspection. Ask the city or sewer utility who owns the pipe under the sidewalk and street: if it's theirs, that part of the bill may not be yours.

Comparing cities, or after the US-wide picture? See the national guide: Sewer line cost in the USA.

Quick answer

$3,650–$13,350 to replace about 50 ft of sewer line in Lexington, with $6,700 typical. Trenchless lining runs $85–$240 a foot, a spot repair $910–$5,250, and a camera inspection $110–$620. Verified November 2026. Get free Lexington quotes →

  • Full 50-ft replacement: $3,650–$13,350 ($6,700 typical)
  • Trenchless lining $85–$240/ft, bursting $55–$240/ft, open trench $45–$240/ft
  • Camera inspection $110–$620; snaking a clogged main $110–$520
  • Spot repair of one section: $910–$5,250
  • Under a driveway or slab: $6,800–$23,850 with the concrete put back

Prices verified November 2026 · Cross-referenced against 56+ American pricing sources · See methodology

Detailed pricing — Sewer line cost in Lexington 2026

Labor, pipe and basic yard restoration included unless the row says otherwise. Lexington metro, re-verified November 2026. Permits and tap fees are set by the city.

ServiceLowTypicalHigh
Sewer camera inspectionper job$110per job$270$620
Main line snaking (cable auger through a cleanout)per job$110per job$270$520
Hydro-jetting the main lineper job$270per job$590$1,450
Tree root removal (root cutter, then flush the line)per job$140per job$360$950
Emergency call-out (nights, weekends, holidays)per job$140per job$230$380
Spot repair: dig up and fix one broken sectionper job$910per job$2,250$5,250
Point repair liner: no-dig patch over one bad sectionper job$1,100per job$2,050$3,400
Belly (sag) repair: dig up and re-lay a low sectionper job$1,350per job$3,200$7,150
Trenchless pipe lining (CIPP)per foot$85per foot$150$240
Pipe bursting (new pipe pulled through the old one)per foot$55per foot$140$240
Traditional dig and replace (open trench)per foot$45per foot$110$240
Sewer line replacement, about 50 ft (traditional dig or trenchless)per job$3,650per job$6,700$13,350
Replacement under a driveway or slab, about 50 ft (concrete restored)per job$6,800per job$11,350$23,850
Sidewalk or street cut and restoration (public right of way)per job$730per job$2,300$5,750
Sewer cleanout installation (outdoor, near the property line)per job$450per job$1,000$1,900
Backwater valve installation (outdoor inline at the low end; cut into a basement floor at the high end)per job$460per job$1,850$4,800
Septic-to-sewer conversion (hookup, old tank abandoned, permits)per job$2,800per job$6,550$14,500
City sewer tap or connection fee (new hookup)flat$400flat$2,000$15,000
Sewer permit and inspectionflat$30flat$250$1,000
Sewage backup cleanup (basement, per event)per job$910per job$2,300$4,800
Bigger sewer line jobs in Lexington: what they costPer job, low to high with the typical price marked. Every line is in the table above.
Replacement under a driveway or slab, about 50 ft (concrete restored) $11,350$6,800–$23.9K
Sewer line replacement, about 50 ft (traditional dig or trenchless) $6,700$3,650–$13.3K
Septic-to-sewer conversion (hookup, old tank abandoned, permits) $6,550$2,800–$14.5K
Belly (sag) repair: dig up and re-lay a low section $3,200$1,350–$7,150
Sidewalk or street cut and restoration (public right of way) $2,300$730–$5,750
Sewage backup cleanup (basement, per event) $2,300$910–$4,800
Spot repair: dig up and fix one broken section $2,250$910–$5,250
Point repair liner: no-dig patch over one bad section $2,050$1,100–$3,400
Backwater valve installation (outdoor inline at the low end; cut into a basement floor at the high end) $1,850$460–$4,800
Smaller sewer line jobs and repairs in LexingtonPer job, low to high with the typical price marked. Every line is in the table above.
Sewer cleanout installation (outdoor, near the property line) $1,000$450–$1,900
Hydro-jetting the main line $590$270–$1,450
Tree root removal (root cutter, then flush the line) $360$140–$950
Already got a quote?
Check it against these Lexington prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local plumbers in Lexington

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What's going on with your sewer line?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 56+ American pricing sources · See methodology

Figures cover the Lexington metro area. Expect the top of each range where lines run under concrete or the street, and the bottom where they run under lawn.

How sewer line costs vary across Lexington

Sewer line prices across Lexington

Where the house sits changes the job. Dense blocks in Downtown & the Distillery District mean more concrete, street cuts and tight access; areas like Georgetown, Nicholasville & Richmond usually have more yard to work in, which keeps digging cheaper.

Sewer line prices across LexingtonTypical range by part of the metro, per job. The line marks the Lexington typical.
Downtown & the Distillery District10–30% above the city typical $6,700–$11.8Kper job
East End & WinburnAround to 15% above typical $6,050–$10.4Kper job
University of Kentucky & Chevy ChaseClose to typical $5,350–$9,050per job
Georgetown, Nicholasville & Richmond5–15% below typical $4,700–$8,400per job

Downtown & the Distillery District

10–30% above the city typical
Downtown, Distillery District, Jefferson St
Per job
$6,700–$11,750 per job
Typical job
$220–$1,400 / clog cleared + camera

Denser blocks with more concrete and less yard, so more jobs need a sidewalk or street cut, a right-of-way permit and traffic control. Parking and tight access add time on site.

East End & Winburn

Around to 15% above typical
East End, Winburn, Cardinal Valley
Per job
$6,050–$10,400 per job
Typical job
$210–$1,250 / clog cleared + camera

Expect quotes near the city typical, a little higher where lots are narrow or the line runs under a driveway. Ask each contractor what's on top of the pipe in their price.

University of Kentucky & Chevy Chase

Close to typical
UK campus, Chevy Chase, Southland
Per job
$5,350–$9,050 per job
Typical job
$190–$1,150 / clog cleared + camera

Rentals near campus see more grease and wipes clogs than most areas. Snaking and jetting are the common jobs; full replacements price close to the city typical.

Georgetown, Nicholasville & Richmond

5–15% below typical
Georgetown, Nicholasville, Richmond KY
Per job
$4,700–$8,400 per job
Typical job
$190–$1,150 / clog cleared + camera

Where homes have newer PVC lines, full replacements are rare; most calls are clogs, cleanout installs and backwater valves.

What you'll actually pay — job by job

Real-world sewer line costs in Lexington

Here's what common sewer line jobs cost in Lexington in 2026, labor, pipe and basic yard restoration included.

Slow drains or a backup: snake the main and film it

$220–$1,150

The most common call. Snaking through a cleanout runs $110–$520, and a camera pass after it $110–$620. At night or on a weekend the call-out alone is $140–$380.

Roots in an old clay line: cut, jet and keep it clear

$410–$2,400

A root cutter ($140–$950) plus a hydro-jet ($270–$1,450) clears most root problems. If the camera shows the pipe is still in one piece, a yearly jet can hold off a $6,700 replacement for years.

One broken or sagging section: spot repair

$910–$5,250

Digging one hole and replacing a few feet of pipe costs $910–$5,250. A no-dig point liner over the same spot runs $1,100–$3,400, and fixing a belly where the pipe has sagged $1,350–$7,150.

Whole line, about 50 ft: trenchless

$2,750–$12,000

Lining 50 ft runs $4,250–$12,000 and bursting $2,750–$12,000, usually in a day or two with one or two small pits. Ask whether the price includes the camera before and after, the permit and the cleanout.

Line under the driveway or slab

$6,800–$23,850

Concrete is what makes this expensive: $6,800–$23,850 for about 50 ft with the concrete put back. Bursting or lining from two pits usually costs less than cutting a full trench through the driveway.

How much does sewer line replacement cost in Lexington?

$3,650–$13,350 for a full 50-ft replacement, and $6,700 is what most Lexington homeowners pay. The method sets the number: lining runs $4,250–$12,000 for 50 ft, bursting $2,750–$12,000, and a dig under lawn $2,250–$12,000. Under a driveway or slab the same job is $6,800–$23,850.

Smaller jobs cost far less: $110–$620 for a camera inspection, $910–$5,250 for a spot repair and $1,100–$3,400 for a no-dig point liner. Get the camera video before anyone quotes a full line. Re-checked against 56 sources, November 2026.

Sewer line prices in Lexington (2026) by job

A full 50-ft replacement runs $3,650–$13,350, trenchless lining of the same line $4,250–$12,000, and a camera inspection $110–$620.

Line on the quoteLowTypicalHigh
Sewer camera inspection$110$270$620
Main line snaking$110$270$520
Hydro-jetting the main line$270$590$1,450
Spot repair (one section)$910$2,250$5,250
Trenchless lining, 50 ft$4,250$7,500$12,000
Pipe bursting, 50 ft$2,750$7,000$12,000
Dig and replace, 50 ft (before restoration)$2,250$5,500$12,000
Under a driveway or slab, 50 ft$6,800$11,350$23,850

A $270 camera inspection is the cheapest line on this table and the one that decides the rest. It shows whether you need a $2,250 spot repair, a $2,050 point liner or a full $6,700 replacement.

What moves a sewer quote in Lexington:

  • What's on top of the pipe: lawn is cheap to dig; a driveway or slab job runs $6,800–$23,850.
  • Depth: deeper lines need bigger holes, shoring and more hauling.
  • Pipe condition: a round, cracked pipe can be lined ($85–$240 a foot); a collapsed one has to be burst or dug.
  • Street and sidewalk: a cut in the public right of way adds $730–$5,750 plus city permits.
  • Length: about $4,200 for 25 ft, $6,700 for 50 ft and $11,750 for 100 ft at typical Lexington prices.

Ask every Lexington contractor for the same four things: the camera footage, the method and length, the permit and restoration they include, and the warranty. Compare those, not the per-foot headline. Get a quote for your sewer job →

Sewer line cost in Lexington by length

Quick answer

A 25-ft run is about $2,300–$8,350, a 50-ft line $3,650–$13,350, and a 100-ft run $6,400–$23,350 in Lexington, before driveway or street restoration.

Worked example: a 50-ft line lined from one cleanout at $150 a foot is $7,500, plus a $270 camera check and a $250 permit, for about $8,020. The same line dug under lawn at $110 a foot is $5,500 before restoration.

Pits, permits, the camera and set-up cost about the same for any length, which is why short runs cost more per foot. A 100-ft line at typical Lexington prices is about $11,750, not twice the 50-ft price.

Lexington sewer repair methods compared

Repair methodCostBest for
Trenchless pipe lining (CIPP)$4,250–$12,000 for 50 ftCracked or root-filled pipe that is still round and on grade
Trenchless pipe bursting$2,750–$12,000 for 50 ftBroken, collapsed or undersized pipe; new pipe can go one size up
Traditional dig and replace (open trench)$2,250–$12,000 for 50 ftShallow lines under lawn, sagging lines that need re-grading
Traditional dig, deep or under a driveway$6,800–$23,850 for 50 ftLines under concrete when trenchless can't be used
Spot repair (dig up one section)$910–$5,250 per repairOne break or bad joint in an otherwise sound line
Point repair liner (no dig, one section)$1,100–$3,400 per repairOne crack or joint under a driveway, tree or walkway
Belly repair (dig and re-grade a low spot)$1,350–$7,150 per repairA sag that holds water and keeps clogging
Hydro-jet and root cut (no repair)$410–$2,400 per visitRoots or grease in a pipe that is still in one piece
Cost by repair method in LexingtonTypical range, for 50 ft.
Trenchless pipe lining (CIPP) $4,250–$12Kfor 50 ft
Trenchless pipe bursting $2,750–$12Kfor 50 ft
Traditional dig and replace (open trench) $2,250–$12Kfor 50 ft
Traditional dig, deep or under a driveway $6,800–$23.9Kfor 50 ft
Lexington tip: a trenchless price that leaves out the camera check after the work, the permit and the cleanout is not a full price. Get all three in writing before you compare.

Per-foot price vs the full bill in Lexington

A quote of $150 a foot for lining sounds simple, but 50 ft at that rate is $7,500 before the extras. Add the camera ($270) and the permit ($250) and the bill is about $8,020, before any access pit or cleanout. Compare whole-job prices, not per-foot rates.

Digging looks cheaper per foot ($45–$240), but restoration is extra: a sidewalk or street cut runs $730–$5,750, and a line under a driveway can reach $23,850. Trenchless costs more per foot and less to put back.

What's included in a Lexington sewer line quote (and what costs extra)

A standard replacement quote covers the camera check, the digging or trenchless work, the new pipe, the connections at the house and the street side, and basic backfill and yard cleanup. It usually leaves out:

  • The permit and inspection: $30–$1,000, set by the city
  • Sidewalk or street restoration: $730–$5,750 when the line runs under public space
  • Driveway or slab concrete: part of why a line under concrete runs $6,800–$23,850
  • A new cleanout or backwater valve: $450–$1,900 and $460–$4,800

Ask for the warranty in writing, and a copy of the camera video from before and after the work.

What affects sewer line costs in Lexington

Depth and frost

Depth depends on the slope from the house to the main and, in cold-winter cities, the frost line. Deeper trenches take longer and may need shoring. Deep lines push a 50-ft job toward $13,350.

What sits on top of the pipe

Lawn is the cheapest thing to dig through. A line under a driveway or slab runs $6,800–$23,850 in Lexington because the concrete has to be cut out and poured again.

Pipe material and age

Clay joints let roots in, cast iron corrodes and scales inside, and Orangeburg fiber pipe, used through the 1970s, loses strength with age. Older pipe is more likely to need a full line than a spot fix.

Trenchless or dig

Lining runs $85–$240 a foot and bursting $55–$240, against $45–$240 for an open trench. Trenchless saves the yard, the driveway and the restoration bill.

Length of the run

Price scales with length: about $4,200 for a 25-ft run and $11,750 for 100 ft at typical Lexington prices, because pits, permits and set-up cost the same either way.

Permits, street cuts and who owns the line

Permits run $30–$1,000. If the pipe crosses the sidewalk or street, a cut and restoration adds $730–$5,750, unless the city owns and fixes that part.

Local labor

Lexington plumbers earn a median of about $29.75 an hour (BLS, May 2025), against $30.67 nationally. Depth, soil, permits and restoration matter as much as wages here: the typical Lexington replacement is $6,700, below the $7,500 national typical.

How to save money on sewer line work in Lexington
  1. Get the camera video first.A $270 inspection shows where the problem is and how bad. Ask for the video file and the footage marks, and show them to a second contractor.
  2. Ask who owns the part under the street.Some cities fix the stretch under the sidewalk and street, or offer rebates and loans. One call to the sewer utility can take a big piece off the bill.
  3. Price a spot repair, not just a new line.If the camera shows one bad joint, a $910–$5,250 spot repair or a $1,100–$3,400 point liner may be all you need.
  4. Get trenchless and dig quotes side by side.Ask for both methods for the same length, with restoration included. Under concrete, trenchless usually wins; under open lawn, a dig can be cheaper.
  5. Don't wait for the emergency.An after-hours call-out adds $140–$380, and after-hours labor runs 1.5–3× the weekday rate. Book the camera and repair on a weekday when you can compare quotes.
  6. Keep roots back on a schedule.If roots are the only problem, a yearly hydro-jet ($590 typical) can buy years before a $6,700 replacement.
Sewer line cost in Lexington: what the quote should include

Get these in writing from any Lexington contractor before you pay a deposit:

  • The camera footage, with the distance to each problem marked
  • The method (lining, bursting or dig) and the exact length of pipe
  • Pipe material and size, and who handles the city connection
  • Permit, inspection and any right-of-way or street-cut fees
  • Restoration: lawn, sidewalk, driveway or street, and who does it
  • Access pits, cleanouts or a backwater valve if they're part of the job
  • Start date, days on site and what happens if they hit rock or water
  • The written warranty and a camera check after the work
Frequently asked questions — Sewer line cost in Lexington
How much does it cost to replace a sewer line in Lexington?

$3,650–$13,350 for about 50 ft, with $6,700 typical. Lines under a driveway or slab run $6,800–$23,850, and a single broken section can often be fixed for $910–$5,250.

How much does trenchless sewer repair cost in Lexington?

Lining runs $85–$240 a foot, about $4,250–$12,000 for 50 ft. Pipe bursting runs $55–$240 a foot, about $2,750–$12,000 for 50 ft.

How much is a sewer camera inspection in Lexington?

$110–$620, typically $270. It costs more if there's no cleanout and the plumber has to pull a toilet, or if the line has to be cleared first.

What does it cost to clear a main sewer line clog in Lexington?

$110–$520 to snake it, or $270–$1,450 to hydro-jet it. Nights and weekends, expect a call-out of $140–$380.

How much does a sewer spot repair cost in Lexington?

$910–$5,250 to dig up and replace one section. A no-dig point repair liner over the same spot costs $1,100–$3,400.

Is trenchless cheaper than digging in Lexington?

Per foot, no: lining is $85–$240 against $45–$240 for an open trench. Overall it often is, because there's little or no concrete, sidewalk or landscaping to put back.

How much more does it cost if the sewer line is under my driveway?

About $6,800–$23,850 for 50 ft in Lexington with the concrete restored, against $3,650–$13,350 under lawn. Bursting or lining from two small pits usually costs less than a full trench.

Who pays to fix the sewer line between my house and the street in Lexington?

Usually the homeowner, at least to the property line and often all the way to the main. Some cities repair the part under the street or offer rebates, so call your sewer utility before work starts.

Do I need a permit to replace a sewer line in Lexington?

Almost always. Expect $30–$1,000 for the permit and inspection, and more if the work crosses the sidewalk or street. A licensed contractor should pull it.

Does homeowners insurance cover sewer line replacement in Lexington?

Usually not when the pipe fails from age, roots or wear. Separate sewer line warranty plans and policies exist, some offered through city partners; read the cap and exclusions before you count on one.

Prices verified November 2026 · Cross-referenced against 56+ American pricing sources · See methodology

Prices for the Lexington metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates from national cost guides, contractor price pages, city fee schedules and BLS wage data. No contractor can pay to change them, so always get two or three quotes after a camera inspection. Last reviewed November 2026. Read our full methodology →

Get a fair sewer line quote in Lexington

Local plumbers · Free quotes · No obligation, no spam.

Get quotes in Lexington →Max 2 plumbers will contact you
Get quotes in LexingtonMax 2 plumbers · free · no spam→