How much does sewer line replacement cost in Tacoma?
By Our research team · Last verified · Methodology
Most Tacoma sewer line replacements cost $4,700–$17,000 to replace about 50 ft of pipe from the house to the city sewer. Expect $8,450 for a typical job; clearing a clog instead runs $140–$1,600.
How we get this data- Typical
- $8,450
- Low end
- $2,800
- High end
- $28,150
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local plumbers send you a real quote. Free, no obligation.
Get my fair quote →The typical Tacoma price is $8,450, 13% above the US typical of $7,500.
Tacoma's price band
Tacoma is pricier than 90% of the 195 US metros we price for sewer line work.
A full sewer line replacement in Tacoma costs $4,700–$17,000 for about 50 ft, typically $8,450. Lining 50 ft runs about $4,750–$13,000, bursting $3,250–$13,000, and an open-trench dig $2,750–$13,000 before restoration. Start with a camera inspection ($140–$680): it tells you which of them you need, if any.
The median plumber wage in the Tacoma metro is about $45.78 an hour (BLS, May 2025), 49% above the $30.67 US median. Labor is the biggest part of a sewer bill, which is why a typical 50-ft replacement here comes to $8,450, against $7,500 nationally.
Before you sign, find out where your part of the line ends. Some cities fix the stretch under the street, some only to the property line, and many leave the whole lateral to the owner. Almost all require a permit ($30–$1,000) and an inspection for a repair or a new line.
Comparing cities, or after the US-wide picture? See the national guide: Sewer line cost in the USA.
$4,700–$17,000 to replace about 50 ft of sewer line in Tacoma, with $8,450 typical. Trenchless lining runs $95–$260 a foot, a spot repair $1,100–$5,800, and a camera inspection $140–$680. Verified November 2026. Get free Tacoma quotes →
- Full 50-ft replacement: $4,700–$17,000 ($8,450 typical)
- Trenchless lining $95–$260/ft, bursting $65–$260/ft, open trench $55–$260/ft
- Camera inspection $140–$680; snaking a clogged main $140–$580
- Spot repair of one section: $1,100–$5,800
- Under a driveway or slab: $8,300–$26,350 with the concrete put back
Prices verified November 2026 · Cross-referenced against 56+ American pricing sources · See methodology
Labor, pipe and basic yard restoration included unless the row says otherwise. Tacoma metro, re-verified November 2026. Permits and tap fees are set by the city.
| Service | Low | Typical | High |
|---|---|---|---|
| Sewer camera inspectionper job | $140per job | $330 | $680 |
| Main line snaking (cable auger through a cleanout)per job | $140per job | $330 | $580 |
| Hydro-jetting the main lineper job | $330per job | $720 | $1,600 |
| Tree root removal (root cutter, then flush the line)per job | $170per job | $450 | $1,050 |
| Emergency call-out (nights, weekends, holidays)per job | $170per job | $280 | $420 |
| Spot repair: dig up and fix one broken sectionper job | $1,100per job | $2,750 | $5,800 |
| Point repair liner: no-dig patch over one bad sectionper job | $1,300per job | $2,350 | $3,650 |
| Belly (sag) repair: dig up and re-lay a low sectionper job | $1,650per job | $3,900 | $7,900 |
| Trenchless pipe lining (CIPP)per foot | $95per foot | $170 | $260 |
| Pipe bursting (new pipe pulled through the old one)per foot | $65per foot | $160 | $260 |
| Traditional dig and replace (open trench)per foot | $55per foot | $130 | $260 |
| Sewer line replacement, about 50 ft (traditional dig or trenchless)per job | $4,700per job | $8,450 | $17,000 |
| Replacement under a driveway or slab, about 50 ft (concrete restored)per job | $8,300per job | $13,850 | $26,350 |
| Sidewalk or street cut and restoration (public right of way)per job | $880per job | $2,750 | $6,300 |
| Sewer cleanout installation (outdoor, near the property line)per job | $550per job | $1,200 | $2,100 |
| Backwater valve installation (outdoor inline at the low end; cut into a basement floor at the high end)per job | $550per job | $2,200 | $5,250 |
| Septic-to-sewer conversion (hookup, old tank abandoned, permits)per job | $3,250per job | $7,550 | $15,550 |
| City sewer tap or connection fee (new hookup)flat | $400flat | $2,000 | $15,000 |
| Sewer permit and inspectionflat | $30flat | $250 | $1,000 |
| Sewage backup cleanup (basement, per event)per job | $1,100per job | $2,750 | $5,250 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local plumbers in Tacoma
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What's going on with your sewer line?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the plumbers who reply.
Where should they text you?
- Max 2 plumbers. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched plumbers see your number.
By continuing, you agree to our Terms and to up to 2 plumbers contacting you by phone or text.
Check your phone
Prices verified November 2026 · Cross-referenced against 56+ American pricing sources · See methodology
Figures cover the Tacoma metro area. Expect the top of each range where lines run under concrete or the street, and the bottom where they run under lawn.
Sewer line prices across Tacoma
Same city, four price bands. Prices run highest in Downtown Tacoma & Stadium District and lowest in Puyallup, Federal Way & Olympia, mostly because of access, concrete and street cuts rather than the pipe itself.
Downtown Tacoma & Stadium District
- Per job
- $8,450–$14,800 per job
- Typical job
- $280–$1,500 / clog cleared + camera
Downtown jobs cost more to set up: tight access, paid parking and more concrete to cut and patch. Trenchless methods pay off most here.
Hilltop & South Tacoma
- Per job
- $7,600–$13,100 per job
- Typical job
- $270–$1,400 / clog cleared + camera
Expect quotes near the city typical, a little higher where lots are narrow or the line runs under a driveway. Ask each contractor what's on top of the pipe in their price.
Eastside & Lakewood
- Per job
- $7,200–$12,250 per job
- Typical job
- $250–$1,300 / clog cleared + camera
Close to the city typical. Mid-century homes may still have their original clay, cast iron or fiber pipe, so a camera check before you buy is money well spent.
Puyallup, Federal Way & Olympia
- Per job
- $5,900–$10,550 per job
- Typical job
- $240–$1,250 / clog cleared + camera
Usually 5–15% under the city typical. Many homes have more yard to dig through and fewer street cuts, though longer runs to the street add feet.
Real-world sewer line costs in Tacoma
Here's what common sewer line jobs cost in Tacoma in 2026, labor, pipe and basic yard restoration included.
Slow drains or a backup: snake the main and film it
The most common call. Snaking through a cleanout runs $140–$580, and a camera pass after it $140–$680. At night or on a weekend the call-out alone is $170–$420.
Roots in an old clay line: cut, jet and keep it clear
A root cutter ($170–$1,050) plus a hydro-jet ($330–$1,600) clears most root problems. If the camera shows the pipe is still in one piece, a yearly jet can hold off a $8,450 replacement for years.
One broken or sagging section: spot repair
Digging one hole and replacing a few feet of pipe costs $1,100–$5,800. A no-dig point liner over the same spot runs $1,300–$3,650, and fixing a belly where the pipe has sagged $1,650–$7,900.
Whole line, about 50 ft: trenchless
Lining 50 ft runs $4,750–$13,000 and bursting $3,250–$13,000, usually in a day or two with one or two small pits. Ask whether the price includes the camera before and after, the permit and the cleanout.
Line under the driveway or slab
Concrete is what makes this expensive: $8,300–$26,350 for about 50 ft with the concrete put back. Bursting or lining from two pits usually costs less than cutting a full trench through the driveway.
How much does sewer line replacement cost in Tacoma?
$4,700–$17,000 for a full 50-ft replacement, and $8,450 is what most Tacoma homeowners pay. The method sets the number: lining runs $4,750–$13,000 for 50 ft, bursting $3,250–$13,000, and a dig under lawn $2,750–$13,000. Under a driveway or slab the same job is $8,300–$26,350.
Smaller jobs cost far less: $140–$680 for a camera inspection, $1,100–$5,800 for a spot repair and $1,300–$3,650 for a no-dig point liner. Get the camera video before anyone quotes a full line. Re-checked against 56 sources, November 2026.
Sewer line prices in Tacoma (2026) by job
A full 50-ft replacement runs $4,700–$17,000, trenchless lining of the same line $4,750–$13,000, and a camera inspection $140–$680.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Sewer camera inspection | $140 | $330 | $680 |
| Main line snaking | $140 | $330 | $580 |
| Hydro-jetting the main line | $330 | $720 | $1,600 |
| Spot repair (one section) | $1,100 | $2,750 | $5,800 |
| Trenchless lining, 50 ft | $4,750 | $8,500 | $13,000 |
| Pipe bursting, 50 ft | $3,250 | $8,000 | $13,000 |
| Dig and replace, 50 ft (before restoration) | $2,750 | $6,500 | $13,000 |
| Under a driveway or slab, 50 ft | $8,300 | $13,850 | $26,350 |
Lining vs digging in Tacoma: the dig often looks cheaper on paper ($6,500 vs $8,500 typical for 50 ft), but the dig price stops at the pipe. Add a sidewalk or street cut ($880–$6,300) or a driveway and trenchless usually wins.
What moves a sewer quote in Tacoma:
- What's on top of the pipe: lawn is cheap to dig; a driveway or slab job runs $8,300–$26,350.
- Depth: deeper lines need bigger holes, shoring and more hauling.
- Pipe condition: a round, cracked pipe can be lined ($95–$260 a foot); a collapsed one has to be burst or dug.
- Street and sidewalk: a cut in the public right of way adds $880–$6,300 plus city permits.
- Length: about $5,300 for 25 ft, $8,450 for 50 ft and $14,800 for 100 ft at typical Tacoma prices.
Ask every Tacoma contractor for the same four things: the camera footage, the method and length, the permit and restoration they include, and the warranty. Compare those, not the per-foot headline. Get a quote for your sewer job →
Sewer line cost in Tacoma by length
A 25-ft run is about $2,950–$10,650, a 50-ft line $4,700–$17,000, and a 100-ft run $8,250–$29,750 in Tacoma, before driveway or street restoration.
Worked example: a 50-ft line lined from one cleanout at $170 a foot is $8,500, plus a $330 camera check and a $250 permit, for about $9,080. The same line dug under lawn at $130 a foot is $6,500 before restoration.
Pits, permits, the camera and set-up cost about the same for any length, which is why short runs cost more per foot. A 100-ft line at typical Tacoma prices is about $14,800, not twice the 50-ft price.
Tacoma sewer repair methods compared
| Repair method | Cost | Best for |
|---|---|---|
| Trenchless pipe lining (CIPP) | $4,750–$13,000 for 50 ft | Cracked or root-filled pipe that is still round and on grade |
| Trenchless pipe bursting | $3,250–$13,000 for 50 ft | Broken, collapsed or undersized pipe; new pipe can go one size up |
| Traditional dig and replace (open trench) | $2,750–$13,000 for 50 ft | Shallow lines under lawn, sagging lines that need re-grading |
| Traditional dig, deep or under a driveway | $8,300–$26,350 for 50 ft | Lines under concrete when trenchless can't be used |
| Spot repair (dig up one section) | $1,100–$5,800 per repair | One break or bad joint in an otherwise sound line |
| Point repair liner (no dig, one section) | $1,300–$3,650 per repair | One crack or joint under a driveway, tree or walkway |
| Belly repair (dig and re-grade a low spot) | $1,650–$7,900 per repair | A sag that holds water and keeps clogging |
| Hydro-jet and root cut (no repair) | $500–$2,650 per visit | Roots or grease in a pipe that is still in one piece |
Per-foot price vs the full bill in Tacoma
A quote of $170 a foot for lining sounds simple, but 50 ft at that rate is $8,500 before the extras. Add the camera ($330) and the permit ($250) and the bill is about $9,080, before any access pit or cleanout. Compare whole-job prices, not per-foot rates.
Digging looks cheaper per foot ($55–$260), but restoration is extra: a sidewalk or street cut runs $880–$6,300, and a line under a driveway can reach $26,350. Trenchless costs more per foot and less to put back.
What's included in a Tacoma sewer line quote (and what costs extra)
A standard replacement quote covers the camera check, the digging or trenchless work, the new pipe, the connections at the house and the street side, and basic backfill and yard cleanup. It usually leaves out:
- The permit and inspection: $30–$1,000, set by the city
- Sidewalk or street restoration: $880–$6,300 when the line runs under public space
- Driveway or slab concrete: part of why a line under concrete runs $8,300–$26,350
- A new cleanout or backwater valve: $550–$2,100 and $550–$5,250
Ask for the warranty in writing, and a copy of the camera video from before and after the work.
Depth and frost
Depth depends on the slope from the house to the main and, in cold-winter cities, the frost line. Deeper trenches take longer and may need shoring. Deep lines push a 50-ft job toward $17,000.
What sits on top of the pipe
Lawn is the cheapest thing to dig through. A line under a driveway or slab runs $8,300–$26,350 in Tacoma because the concrete has to be cut out and poured again.
Pipe material and age
Clay joints let roots in, cast iron corrodes and scales inside, and Orangeburg fiber pipe, used through the 1970s, loses strength with age. Older pipe is more likely to need a full line than a spot fix.
Trenchless or dig
Lining runs $95–$260 a foot and bursting $65–$260, against $55–$260 for an open trench. Trenchless saves the yard, the driveway and the restoration bill.
Length of the run
Price scales with length: about $5,300 for a 25-ft run and $14,800 for 100 ft at typical Tacoma prices, because pits, permits and set-up cost the same either way.
Permits, street cuts and who owns the line
Permits run $30–$1,000. If the pipe crosses the sidewalk or street, a cut and restoration adds $880–$6,300, unless the city owns and fixes that part.
Local labor
Tacoma plumbers earn a median of about $45.78 an hour (BLS, May 2025), against $30.67 nationally. Sewer work is mostly labor and equipment time, so the typical Tacoma replacement is $8,450, above the $7,500 national typical.
- Get the camera video first.A $330 inspection shows where the problem is and how bad. Ask for the video file and the footage marks, and show them to a second contractor.
- Ask who owns the part under the street.Some cities fix the stretch under the sidewalk and street, or offer rebates and loans. One call to the sewer utility can take a big piece off the bill.
- Price a spot repair, not just a new line.If the camera shows one bad joint, a $1,100–$5,800 spot repair or a $1,300–$3,650 point liner may be all you need.
- Get trenchless and dig quotes side by side.Ask for both methods for the same length, with restoration included. Under concrete, trenchless usually wins; under open lawn, a dig can be cheaper.
- Don't wait for the emergency.An after-hours call-out adds $170–$420, and after-hours labor runs 1.5–3× the weekday rate. Book the camera and repair on a weekday when you can compare quotes.
- Keep roots back on a schedule.If roots are the only problem, a yearly hydro-jet ($720 typical) can buy years before a $8,450 replacement.
Get these in writing from any Tacoma contractor before you pay a deposit:
- The camera footage, with the distance to each problem marked
- The method (lining, bursting or dig) and the exact length of pipe
- Pipe material and size, and who handles the city connection
- Permit, inspection and any right-of-way or street-cut fees
- Restoration: lawn, sidewalk, driveway or street, and who does it
- Access pits, cleanouts or a backwater valve if they're part of the job
- Start date, days on site and what happens if they hit rock or water
- The written warranty and a camera check after the work
How much does it cost to replace a sewer line in Tacoma?
$4,700–$17,000 for about 50 ft, with $8,450 typical. Lines under a driveway or slab run $8,300–$26,350, and a single broken section can often be fixed for $1,100–$5,800.
How much does trenchless sewer repair cost in Tacoma?
Lining runs $95–$260 a foot, about $4,750–$13,000 for 50 ft. Pipe bursting runs $65–$260 a foot, about $3,250–$13,000 for 50 ft.
How much is a sewer camera inspection in Tacoma?
$140–$680, typically $330. It costs more if there's no cleanout and the plumber has to pull a toilet, or if the line has to be cleared first.
What does it cost to clear a main sewer line clog in Tacoma?
$140–$580 to snake it, or $330–$1,600 to hydro-jet it. Nights and weekends, expect a call-out of $170–$420.
How much does a sewer spot repair cost in Tacoma?
$1,100–$5,800 to dig up and replace one section. A no-dig point repair liner over the same spot costs $1,300–$3,650.
Is trenchless cheaper than digging in Tacoma?
Per foot, no: lining is $95–$260 against $55–$260 for an open trench. Overall it often is, because there's little or no concrete, sidewalk or landscaping to put back.
How much more does it cost if the sewer line is under my driveway?
About $8,300–$26,350 for 50 ft in Tacoma with the concrete restored, against $4,700–$17,000 under lawn. Bursting or lining from two small pits usually costs less than a full trench.
Who pays to fix the sewer line between my house and the street in Tacoma?
Usually the homeowner, at least to the property line and often all the way to the main. Some cities repair the part under the street or offer rebates, so call your sewer utility before work starts.
Do I need a permit to replace a sewer line in Tacoma?
Almost always. Expect $30–$1,000 for the permit and inspection, and more if the work crosses the sidewalk or street. A licensed contractor should pull it.
Does homeowners insurance cover sewer line replacement in Tacoma?
Usually not when the pipe fails from age, roots or wear. Separate sewer line warranty plans and policies exist, some offered through city partners; read the cap and exclusions before you count on one.
Prices verified November 2026 · Cross-referenced against 56+ American pricing sources · See methodology
Prices for the Tacoma metro area, November 2026. Outer suburbs may vary.
Get a fair sewer line quote in Tacoma
Local plumbers · Free quotes · No obligation, no spam.