How much does HVAC cost in Philadelphia?
By Our research team · Last verified · Methodology
Most Philadelphia homeowners pay $4,000–$9,000 to replace a central AC of 3 tons on existing ducts, with $6,200 typical. Gas furnaces run $2,800–$8,000 and heat pumps $5,500–$12,500.
How we get this data- Typical
- $6,200
- Low end
- $3,000
- High end
- $13,500
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local HVAC contractors send you a real quote. Free, no obligation.
Get my fair quote →The typical Philadelphia price is $6,200, in line with the US typical of $6,200.
Philadelphia's price band
Philadelphia is pricier than 78% of the 195 US metros we price for HVAC work.
Expect $4,000–$9,000 for a new 3-ton central AC in Philadelphia and $6,200 for a typical job. Homes without ducts usually go ductless: $4,500–$10,000 for two zones and $8,000–$18,000 for four.
Philadelphia row houses often put the condenser on a flat roof, so getting equipment up there can add labor or a crane. Older homes on radiators need a ductless system or new ducts to get whole-house cooling.
Prices on this page are installed: equipment, labor, removal of the old unit and startup. A permit ($100–$250), a new line set ($200–$650) or duct repairs may be extra, so ask. Labor is usually 40–60% of the bill.
Comparing cities, or after the US-wide picture? See the national guide: HVAC cost in the USA.
$4,000–$9,000 to replace a 3-ton central AC on existing ducts in Philadelphia, installed — $6,200 typical. A heat pump runs $5,500–$12,500, a gas furnace $2,800–$8,000, and AC + furnace together $6,500–$16,000. Verified November 2026. Get free Philadelphia quotes →
- 3-ton central AC on existing ducts: $4,000–$9,000 ($6,200 typical)
- Heat pump, 3-ton: $5,500–$12,500; gas furnace: $2,800–$8,000
- AC + furnace together: $6,500–$16,000
- Mini-split: $2,500–$5,600 for one 12,000 BTU zone, $8,000–$18,000 for four
- Center City & Fishtown runs 5–10% above the city average; West & Southwest Philly: standard pricing
Prices verified November 2026 · Cross-referenced against 45+ American pricing sources · See methodology
Installed prices for the Philadelphia metro, re-verified November 2026. Equipment-heavy jobs move less with local labor costs than service calls do.
| Service | Low | Typical | High |
|---|---|---|---|
| Central AC replacement, 3-ton (existing ducts)installed | $4,000installed | $6,200 | $9,000 |
| Central AC + gas furnace, replaced togetherinstalled | $6,500installed | $9,800 | $16,000 |
| Heat pump replacement, 3-ton (existing ducts)installed | $5,500installed | $8,000 | $12,500 |
| Central heat pump, high-efficiency with zoning (3-ton)installed | $10,000installed | $14,500 | $21,000 |
| Gas furnace replacement (80–96% AFUE)installed | $2,800installed | $4,600 | $8,000 |
| Ductless mini-split, 1 zone, 9,000 BTUinstalled | $2,200installed | $3,300 | $4,800 |
| Ductless mini-split, 1 zone, 12,000 BTUinstalled | $2,500installed | $3,900 | $5,600 |
| Ductless mini-split, 1 zone, 18,000 BTUinstalled | $3,200installed | $5,000 | $7,200 |
| Ductless mini-split, 1 zone, 24,000 BTUinstalled | $3,800installed | $6,200 | $8,800 |
| Ductless mini-split, 1 zone, 30,000–36,000 BTUinstalled | $4,800installed | $7,800 | $11,500 |
| Multi-zone mini-split, 2 zonesinstalled | $4,500installed | $6,500 | $10,000 |
| Multi-zone mini-split, 4 zonesinstalled | $8,000installed | $12,000 | $18,000 |
| Like-for-like AC swap: same-size mini-split, existing line setinstalled | $2,300installed | $3,500 | $5,200 |
| Install only: homeowner-supplied mini-split, 1 zonelabor only | $500labor only | $1,100 | $2,000 |
| Evaporative (swamp) cooler, roof-mountedinstalled | $1,300installed | $2,300 | $3,600 |
| Ductwork replacement, whole houseinstalled | $2,500installed | $5,500 | $9,500 |
| AC compressor replacement (out of warranty)per repair | $1,300per repair | $2,100 | $3,000 |
| AC repair, major: refrigerant leak fix + rechargeper repair | $600per repair | $1,300 | $2,500 |
| AC repair, minor: capacitor, contactor or drain lineper repair | $150per repair | $300 | $600 |
| AC tune-upper visit | $75per visit | $110 | $200 |
| Whole-system HVAC tune-up (AC + furnace)per year | $150per year | $230 | $450 |
| Duct cleaning, whole houseper home | $300per home | $450 | $700 |
| Smart thermostat, installedinstalled | $200installed | $300 | $450 |
| Old AC or furnace removal and disposalper unit | $100per unit | $250 | $500 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local HVAC contractors in Philadelphia
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need a price on?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the HVAC contractors who reply.
Where should they text you?
- Max 2 HVAC contractors. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched HVAC contractors see your number.
By continuing, you agree to our Terms and to up to 2 HVAC contractors contacting you by phone or text.
Check your phone
Prices verified November 2026 · Cross-referenced against 45+ American pricing sources · See methodology
Prices cover the Philadelphia metro: the city and its close suburbs. Outlying towns can run a little lower; Center City & Fishtown runs a little higher.
HVAC prices across Philadelphia
Where you live changes the quote. Center City & Fishtown costs the most because of access and older buildings; West & Southwest Philly usually comes in at or under the city typical.
Center City & Fishtown
- Installed
- $4,200–$9,900 installed
- Typical job
- $5,850–$7,850 / 3-ton AC swap
Condos, row houses and older buildings. Condensers often sit on roofs or in tight side yards, and paid parking, freight elevators and building rules all add labor.
North Philly
- Installed
- $4,100–$9,450 installed
- Typical job
- $5,700–$7,500 / 3-ton AC swap
Older houses next to new infill. The swap itself is standard; the extras are undersized ducts, old wiring and line sets that need replacing for the new refrigerant.
West & Southwest Philly
- Installed
- $4,000–$9,000 installed
- Typical job
- $5,600–$7,150 / 3-ton AC swap
Mostly houses with central systems in garages, closets, attics or basements. Quotes cluster around the city typical.
South Philly, Delco & the suburbs
- Installed
- $4,000–$9,550 installed
- Typical job
- $5,600–$7,550 / 3-ton AC swap
Newer two-story homes are common here, which often means two systems or zoning. Access is easy, so labor per ton is lower.
Real-world HVAC costs in Philadelphia
Here's what common HVAC jobs cost in Philadelphia in 2026, a 3-ton central AC replacement on existing ducts, installed.
Swap a 3-ton AC on good ducts
Same spot, same size, matched indoor coil, old unit hauled away. Most Philadelphia jobs land near $6,200; a 17+ SEER2 unit adds about $2,100.
Replace the AC and gas furnace together
The usual move when both are 15+ years old. One install, one warranty, a matched system. Typical is $9,800.
Switch from AC + furnace to a heat pump
A 3-ton heat pump on existing ducts, typically $8,000. Keeping the furnace as backup (dual-fuel) runs $7,100–$17,000.
Cool one room with a mini-split
A 12,000 BTU single-zone mini-split for a bedroom, office or addition, typically $3,900. A 9,000 BTU unit for a small room is $2,200–$4,800.
Cool a whole home with no ducts
A 4-zone ductless system, typically $12,000. Adding ducts for central AC instead costs $2,500–$9,500 before the equipment.
How much does HVAC cost in Philadelphia?
Between $4,000 and $9,000 for a 3-ton central AC on existing ducts, and most Philadelphia homeowners pay close to $6,200. Size, efficiency and access set the number: a basic 13.4 SEER2 swap in an easy spot sits at the bottom, and a 20+ SEER2 variable-speed system with an attic air handler sits at the top.
If the furnace is old too, doing both at once ($6,500–$16,000) usually costs less than two separate jobs. A 3-ton heat pump that heats and cools runs $5,500–$12,500, and a high-efficiency zoned heat pump $10,000–$21,000.
Central AC, heat pump and furnace prices in Philadelphia (2026)
A 3-ton central AC runs $4,000–$9,000, a 3-ton heat pump $5,500–$12,500, and a gas furnace $2,800–$8,000, all installed.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Central AC replacement, 3-ton (existing ducts) | $4,000 | $6,200 | $9,000 |
| Heat pump, 3-ton (existing ducts) | $5,500 | $8,000 | $12,500 |
| Gas furnace (80–96% AFUE) | $2,800 | $4,600 | $8,000 |
| Central AC + gas furnace together | $6,500 | $9,800 | $16,000 |
| Mini-split, 1 zone, 12,000 BTU | $2,500 | $3,900 | $5,600 |
| Mini-split, 2 zones | $4,500 | $6,500 | $10,000 |
| Mini-split, 4 zones | $8,000 | $12,000 | $18,000 |
| Ductwork replacement, whole house | $2,500 | $5,500 | $9,500 |
AC or heat pump in Philadelphia? A heat pump costs about $1,800 more than a 3-ton AC at the typical price, but it also replaces your heating. If your furnace is old, compare a heat pump with the $9,800 AC + furnace swap, not with the AC alone.
What moves an HVAC quote in Philadelphia:
- Size: a 2-ton system runs about $5,200 and a 5-ton about $8,700 at the typical price. Ask for a Manual J load calculation.
- Efficiency: the minimum here is 13.4 SEER2; a 17+ SEER2 two-stage unit adds about $2,100.
- Access: attic air handlers, rooftop condensers and tight closets add labor, most often in Center City & Fishtown.
- Line set and coil: a new line set runs $200–$650, and the indoor coil has to match the new refrigerant.
- Season: spring and fall bring the best prices; a breakdown during a summer heat wave brings the worst.
Ask every Philadelphia contractor for the same things: tonnage, SEER2 rating, model numbers for both the outdoor and indoor units, and whether the permit and line set are included. Compare those, not just the total. Get a quote for your heating and cooling work →
HVAC cost in Philadelphia by home size
About $5,600 for a 2.5-ton AC (1,000–1,600 sq ft), $6,200 for 3 tons (1,600–2,000 sq ft), and $7,650–$8,700 for 4–5 tons in homes over 2,500 sq ft, typical Philadelphia prices on existing ducts.
Worked example: a 2,000 sq ft Philadelphia home with a 16-year-old AC and furnace. Replacing both runs about $9,800; switching to a 3-ton heat pump on the same ducts runs about $8,000; replacing only the AC is $6,200 but leaves an old furnace in place.
Homes over 2,500 sq ft or with two floors often have two systems or zoning. A high-efficiency zoned heat pump runs $10,000–$21,000, and adding zoning to an existing system $1,700–$4,500.
Philadelphia HVAC costs by system type
| System type | Cost | Best for |
|---|---|---|
| Central AC, 3-ton (existing ducts) | $4,000–$9,000 installed | Homes with sound ducts and a furnace or air handler to pair with |
| Ductless mini-split, single zone (9,000–18,000 BTU) | $2,200–$7,200 installed | One room, an addition, or a home with no ducts |
| Multi-zone ductless mini-split (2–4 zones) | $4,500–$18,000 installed | Whole homes with no ducts, room-by-room control |
| Heat pump, 3-ton ducted (heats and cools) | $5,500–$12,500 installed | Mild and hot climates; replacing an AC and electric heat |
| Gas furnace + AC, replaced together | $6,500–$16,000 installed | Cold climates with natural gas and old equipment on both sides |
| Gas furnace only (80–96% AFUE) | $2,800–$8,000 installed | When the AC is newer than the furnace |
| Dual-fuel: heat pump + gas furnace | $7,100–$17,000 installed | Cold climates: electric heat most days, gas on the coldest |
| Cold-climate heat pump, 3-ton ducted | $9,500–$24,000 installed | Northern homes leaving gas, oil or propane |
| Central heat pump, high-efficiency with zoning | $10,000–$21,000 installed | Big or two-story homes with hot and cold rooms |
| Evaporative (swamp) cooler, roof-mounted | $1,300–$3,600 installed | Dry Western climates only |
| Geothermal heat pump (ground loop) | $15,000–$35,000 installed | Large lots and long stays in one home |
| Window or through-the-wall AC | $210–$1,200 installed | Single rooms and renters; cheapest way to cool |
Equipment vs installation: the Philadelphia AC bill
On a typical $6,200 3-ton swap in Philadelphia, the condenser and matched coil are roughly $2,500–$3,700 and the rest is labor, materials, the permit and overhead. Labor usually makes up 40–60% of an AC replacement.
Buying the unit yourself rarely saves much: many contractors won't install customer-supplied equipment, and the ones who do charge $500–$2,000 or more for a mini-split and won't cover the parts. Brand warranties often require a licensed installer.
What's included in a Philadelphia AC replacement (and what costs extra)
A standard replacement quote covers the outdoor unit, a matched indoor coil, refrigerant, connection to your existing ducts and wiring, removal of the old unit, and startup. Common extras:
- Permit and inspection: $100–$250, often built into the quote
- New refrigerant line set: $200–$650 if the old one can't be reused
- New condenser pad: $40–$250
- Electrical panel upgrade: $850–$4,000, mostly when adding a heat pump or more capacity
Ask for the AHRI certificate showing the matched rating of your outdoor and indoor units. It proves the system you paid for is the one that was installed.
Philadelphia's climate
Philadelphia row houses often put the condenser on a flat roof, so getting equipment up there can add labor or a crane. Older homes on radiators need a ductless system or new ducts to get whole-house cooling.
System size
Each ton adds equipment cost: about $5,200 for 2 tons and $7,650 for 4 tons at the typical Philadelphia price. A Manual J load calculation often shows a smaller system will do.
Efficiency rating
The federal minimum for a new split AC here is 13.4 SEER2. Higher ratings cost more upfront and pay back fastest where AC runs most of the year.
New refrigerants
New systems use A2L refrigerants (R-454B or R-32), so the indoor coil must match the outdoor unit. That's why condenser-only swaps are rare now, and why older R-410A systems cost more to service.
Ducts and access
Leaky or undersized ducts, attic air handlers and rooftop condensers add hours. Whole-house duct replacement runs $2,500–$9,500.
Location: Center City & Fishtown vs West & Southwest Philly
Center City & Fishtown jobs cost more because of access, parking and older buildings. West & Southwest Philly quotes usually sit at or a little under the city typical.
Season and urgency
Replacing on your schedule in spring or fall is cheaper than an emergency swap in a heat wave. After-hours repair labor runs $160–$250 an hour.
- Get three quotes for the same system.Same tonnage, same SEER2 rating, model numbers on every quote. Philadelphia quotes for the same 3-ton swap run anywhere from $4,000 to $9,000.
- Replace before it fails.If your system is 12–15+ years old, replace it in spring or fall. Emergency replacements in peak season leave no room to shop around.
- Right-size the system.Ask for a Manual J load calculation. An oversized AC costs more, cycles on and off, and leaves the house clammy.
- Check your utility for rebates.There is no federal tax credit for systems installed in 2026, but many utilities still pay rebates on efficient heat pumps and AC. Check before you sign; most require pre-approval or a listed contractor.
- Do the AC and furnace together if both are old.One install of both runs $6,500–$16,000, less than two separate jobs.
- Keep up with tune-ups.A yearly tune-up at $75–$200 catches weak capacitors and low refrigerant before they kill a compressor ($1,300–$3,000).
Before you pay a deposit to a Philadelphia HVAC contractor, get these in writing:
- Tonnage and how it was sized (a Manual J load calculation)
- Model numbers for the outdoor unit and the indoor coil or air handler
- The matched SEER2 (and HSPF2 for a heat pump) rating
- Whether the line set is new, flushed or reused
- Permit, inspection and removal of the old unit
- Thermostat, pad, disconnect and any electrical work
- Parts and labor warranty terms, and who registers the equipment
- Total price, deposit, and start and finish dates
How much does it cost to replace a central AC in Philadelphia?
$4,000–$9,000 for a 3-ton system on existing ducts, installed, with $6,200 typical in Philadelphia. Higher-efficiency units, attic or rooftop installs and new line sets push it up.
How much does a heat pump cost in Philadelphia?
$5,500–$12,500 for a 3-ton heat pump on existing ducts, about $8,000 typical. A high-efficiency zoned system runs $10,000–$21,000.
How much is a new furnace in Philadelphia?
$2,800–$8,000 for a gas furnace installed, about $4,600 typical. With a new AC at the same time, $6,500–$16,000.
How much does a mini-split cost in Philadelphia?
$2,500–$5,600 for a 12,000 BTU single zone, $4,500–$10,000 for two zones and $8,000–$18,000 for four.
How much is an AC tune-up in Philadelphia?
$75–$200 per visit. A yearly plan for AC and furnace runs $150–$450.
How much does AC repair cost in Philadelphia?
$150–$600 for common fixes like a capacitor or contactor. A refrigerant leak repair with recharge runs $600–$2,500, and a compressor $1,300–$3,000.
What size AC does a Philadelphia home need?
As a rough guide, 2.5 tons covers about 1,000–1,600 sq ft and 3 tons about 1,600–2,000 sq ft, but insulation, windows and climate change that. Ask for a Manual J load calculation instead of matching the old unit.
Is there a tax credit for a new AC or heat pump in Philadelphia?
No federal one for 2026: the 25C credit covered improvements made through December 31, 2025. Utility and state rebates may still apply, so check before you buy.
Do I need a permit to replace an AC in Philadelphia?
Usually, yes. Most US cities and counties require a mechanical permit for an AC or furnace replacement, typically $100–$250, and a licensed contractor normally pulls it.
How much does it cost to add ducts in Philadelphia?
$2,500–$9,500 for whole-house ductwork, before the AC or heat pump. In many older homes a multi-zone mini-split ($8,000–$18,000 for four zones) costs less.
Prices verified November 2026 · Cross-referenced against 45+ American pricing sources · See methodology
Prices for the Philadelphia metro area, November 2026. Outer suburbs may vary.
Get a fair HVAC quote in Philadelphia
Local HVAC contractors · Free quotes · No obligation, no spam.