How much does EV charger installation cost in Philadelphia?
By Our research team · Last verified · Methodology
Most Level 2 EV charger installs in Philadelphia cost $1,100–$2,950 when the charger is mounted near a panel with room for it. Expect about $1,850. If the panel is full, add $420–$1,550 for load management or $1,600–$4,800 for an upgrade.
How we get this data- Typical
- $1,850
- Low end
- $760
- High end
- $4,450
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local EV charger installers send you a real quote. Free, no obligation.
Get my fair quote →The typical Philadelphia price is $1,850, 9% above the US typical of $1,700.
Philadelphia's price band
Philadelphia is pricier than 93% of the 195 US metros we price for EV charger work.
Expect $1,100–$2,950 for a Level 2 charger hardwired close to the panel in Philadelphia, charger included, with $1,850 the usual bill. A Tesla Wall Connector installed runs $1,200–$2,850. Detached garages that need a 60-foot trench run $2,000–$5,650.
Philadelphia rowhouses often have the panel in the basement and parking on the street or a back alley, so the run is long. Qmerit's 2026 install data, which includes harder jobs like panel work and long runs, puts the average Pennsylvania install at $3,022 before the charger, against $2,442 nationally. That is one of the highest state averages.
The federal 30C home charger credit ended for chargers placed in service after June 30, 2026, so a charger installed in Philadelphia now gets no federal tax credit. Utility rebates are separate. Check your utility before you buy, because many require approval before the install.
Comparing cities, or after the US-wide picture? See the national guide: EV charger installation cost in the USA.
$1,100–$2,950 in Philadelphia for a Level 2 charger hardwired near the panel, charger included — typically $1,850. A NEMA 14-50 outlet alone is $540–$1,500, and a panel upgrade adds $1,600–$4,800 if you need one. Verified November 2026. Get free Philadelphia quotes →
- Level 2 charger hardwired near the panel: $1,100–$2,950 ($1,850 typical), charger included
- NEMA 14-50 outlet only: $540–$1,500; a plug-in charger adds $300–$750
- Tesla Wall Connector installed: $1,200–$2,850; the charger alone is $585
- Panel full? Load management $420–$1,550 vs a 200-amp upgrade $1,600–$4,800
- The federal 30C home charger credit ended for chargers placed in service after June 30, 2026
Prices verified November 2026 · Cross-referenced against 42+ American pricing sources · See methodology
Installed prices include the charger and the permit unless the row says otherwise; the permit row shows that part on its own. Philadelphia metro, re-verified November 2026.
| Service | Low | Typical | High |
|---|---|---|---|
| Level 1: dedicated 120V outlet, check or installinstalled | $160installed | $380 | $860 |
| Level 2 outlet: NEMA 14-50 near the panelinstalled | $540installed | $860 | $1,500 |
| Level 2 charger, hardwired near the panel (charger included)installed | $1,100installed | $1,850 | $2,950 |
| Level 2 install only (you supply the charger)installed | $590installed | $1,200 | $1,950 |
| Level 2 with a long run (far side of the house or garage)installed | $2,150installed | $3,100 | $4,800 |
| Extra wire run past the first 25 ftper foot | $10per foot | $15 | $30 |
| Tesla Wall Connector, installedinstalled | $1,200installed | $1,850 | $2,850 |
| ChargePoint Home Flex, installedinstalled | $1,150installed | $1,800 | $2,850 |
| Budget smart charger (Emporia, Grizzl-E), installedinstalled | $900installed | $1,600 | $2,550 |
| Charger only: Tesla Wall Connector (Universal at the top)hardware | $585hardware | $585 | $660 |
| Charger only: ChargePoint Home Flexhardware | $549hardware | $600 | $750 |
| Charger only: budget 40–48A (Emporia, Grizzl-E)hardware | $300hardware | $450 | $600 |
| Panel upgrade to 200A (when the load calc needs it)per job | $1,600per job | $2,700 | $4,800 |
| Load management device (smart splitter or panel-side unit)installed | $420installed | $830 | $1,550 |
| Garage subpanel with feeder run (60–100A)installed | $640installed | $1,400 | $2,650 |
| Outdoor pedestal or driveway post mountadded | $530added | $1,050 | $2,100 |
| Trenching to a detached garage (conduit and wire)per foot | $15per foot | $25 | $45 |
| Permit and inspectionper job | $50per job | $260 | $730 |
| Bidirectional charger / vehicle-to-home backup (Ford, GM)system, installed | $7,200system, installed | $10,800 | $15,400 |
| Second charger / two-EV load sharinginstalled | $1,050installed | $1,800 | $3,150 |
| Charger troubleshooting or repairper visit | $110per visit | $300 | $700 |
| Condo or townhouse charger with HOA approvalper space | $2,150per space | $4,300 | $9,650 |
| Electrician labor rate/hr | $55/hr | $100 | $140 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local EV charger installers in Philadelphia
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need a quote for?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the EV charger installers who reply.
Where should they text you?
- Max 2 EV charger installers. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched EV charger installers see your number.
By continuing, you agree to our Terms and to up to 2 EV charger installers contacting you by phone or text.
Check your phone
Prices verified November 2026 · Cross-referenced against 42+ American pricing sources · See methodology
Prices cover the Philadelphia metro: the city and close suburbs. Rural areas run the same or a little less per hour, but runs are longer.
EV charger installation prices across Philadelphia
Where you live in Philadelphia changes the job more than the price per hour. Center City & Fishtown means older buildings and long runs. South Philly, Delco & the suburbs usually comes in lowest.
Center City & Fishtown
- Installed
- $1,200–$3,400 installed
- Typical job
- $590–$1,700 / NEMA 14-50 outlet
Condos, older apartment buildings and tight parking. Board or HOA sign-off, long runs from a basement panel and paid permits push the price up.
North Philly
- Installed
- $1,150–$3,200 installed
- Typical job
- $560–$1,600 / NEMA 14-50 outlet
A mix of older houses and newer infill. In the older ones a load calculation often comes back tight, so a load management device or a panel upgrade is common.
West & Southwest Philly
- Installed
- $1,100–$2,950 installed
- Typical job
- $530–$1,500 / NEMA 14-50 outlet
Houses with driveways and garages. If your panel already has room for a 50-amp breaker, the job is often done in an afternoon.
South Philly, Delco & the suburbs
- Installed
- $1,050–$2,950 installed
- Typical job
- $510–$1,500 / NEMA 14-50 outlet
Bigger homes, but the panel is usually in the garage, so runs are short. Two-EV households and load sharing are most common here.
Real EV charger installation costs in Philadelphia
Here's what common EV charger jobs cost in Philadelphia in 2026, parts and labor included.
Plug-in charger on a new NEMA 14-50 outlet
An outlet near the panel costs $540–$1,500, and a budget plug-in charger adds $300–$600. A plug-in charger tops out at 40 amps on a 50-amp circuit, about 30 miles of range an hour for most EVs. That is enough for most daily driving.
Tesla Wall Connector in an attached garage
The Wall Connector costs $585 (the Universal model is $660). The rest is a 60-amp circuit, a short run and the permit. Most Philadelphia jobs like this come in near $1,850.
Full 100-amp panel, load management instead of an upgrade
The charger job plus a load management device that pauses or slows charging when the house is busy. That compares with $2,700–$7,750 for the same charger with a 200-amp panel upgrade.
Detached garage, 60-foot trench
Trenching with conduit and wire runs $15–$45 per foot. A run this long often needs thicker wire. Some garages also need a subpanel ($640–$2,650), so get the scope in writing.
Two EVs sharing one circuit
A first charger near the panel plus a second, power-sharing charger ($1,050–$3,150). Sharing one circuit is usually cheaper than a second 60-amp circuit on a tight panel.
How much does EV charger installation cost in Philadelphia?
Between $1,100 and $2,950 for a Level 2 charger hardwired near the panel, with $1,850 the most common bill in Philadelphia. Three things set the price: how far the wire runs, whether the panel has room, and which charger you buy. The charger is $300–$750. The rest is labor, wire, a breaker and the permit.
The panel is the big unknown. If a load calculation says your panel is full, a load management device ($420–$1,550) is often the cheaper fix. A 200-amp upgrade ($1,600–$4,800) is the expensive one. A detached garage adds $15–$45 per foot of trench. Re-verified against 42 sources in November 2026.
EV charger quote lines in Philadelphia (2026): what each part costs
A charger hardwired near the panel is $1,100–$2,950. Here is how a typical Philadelphia quote breaks down, with the add-ons that change the total.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Charger hardware (budget to premium) | $300 | $550 | $750 |
| Labor, materials and permit, short run | $590 | $1,200 | $1,950 |
| New double-pole breaker for the charger | $65 | $100 | $160 |
| Extra wire past 25 ft, per foot | $10 | $15 | $30 |
| Permit and inspection | $50 | $260 | $730 |
| Load management device | $420 | $830 | $1,550 |
| Garage subpanel with feeder run | $640 | $1,400 | $2,650 |
| Panel upgrade to 200A | $1,600 | $2,700 | $4,800 |
Outlet or hardwired? In Philadelphia a NEMA 14-50 outlet is $540–$1,500 and lets you swap chargers later. Hardwiring costs a little more, allows 48 amps, and has no plug to wear out. It is the better choice outdoors.
What moves an EV charger quote in Philadelphia:
- Distance to the panel: each foot past 25 adds $10–$30.
- Panel room: load management $420–$1,550, or a 200-amp upgrade $1,600–$4,800.
- Garage type: detached garages add trenching at $15–$45 per foot.
- Charger choice: $300 budget units to $750 premium ones. 48 amps needs a 60-amp circuit.
- Permit and code: $50–$370, up to $730 in a few cities for the permit. The National Electrical Code (2020 and later) requires GFCI protection on EV charging outlets.
Ask every Philadelphia electrician for the same four things: the load calculation result, the wire run length, the breaker size, and whether the permit is in the price. Compare those, not the headline number. Get a quote for your charger install →
EV charger cost in Philadelphia by garage type
An attached garage with the panel nearby is $1,100–$2,950. The far side of the house runs $2,150–$4,800, a detached garage 60 feet away $2,000–$5,650, and a condo space with HOA approval $2,150–$9,650.
Worked example: a Tesla Wall Connector in an attached Philadelphia garage, 15 feet from a 200-amp panel. The $585 charger, plus labor, breaker, wire and a $260 permit, comes to about $1,850. Put the same charger in a detached garage 60 feet away and the trench alone adds about $1,500.
Condos and townhouses cost the most per charger ($2,150–$9,650). The runs are long, the board has to approve it, and shared garages often need a load-managed system. In older North Philly homes, budget for a load calculation that may come back tight.
Philadelphia EV charger costs by charger option
| Charger option | Cost | Best for |
|---|---|---|
| Level 1: 120V outlet | $160–$860 installed | Short commutes and plug-in hybrids: about 3–5 miles of range per hour |
| Level 2 outlet: NEMA 14-50 + plug-in charger | $840–$2,100 installed | Up to 40 amps, about 30 miles per hour. Easy to swap chargers |
| Hardwired Level 2 near the panel (any charger) | $1,100–$2,950 installed | The going rate in this guide: charger, wiring and permit. About 25–44 miles per hour |
| Budget smart charger, hardwired (40–48A) | $900–$2,550 installed | Most single-EV homes on a budget: about 25–44 miles per hour, depending on the car and circuit |
| Hardwired Level 2: Tesla Wall Connector | $1,200–$2,850 installed | Teslas and other NACS cars: up to 44 miles per hour at 48 amps |
| Hardwired Level 2: ChargePoint Home Flex | $1,150–$2,850 installed | Any J1772 or NACS car. Also sold as a plug-in model |
| Two chargers with load sharing | $2,150–$6,100 installed | Two-EV homes on one circuit |
| Bidirectional charger (vehicle-to-home) | $7,200–$15,400 installed | Home backup power from a compatible Ford or GM EV |
Charger price vs installed price in Philadelphia
The charger is the smallest part of the bill. A Tesla Wall Connector is $585 and a ChargePoint Home Flex $549–$750, but installed in Philadelphia they run $1,200–$2,850 and $1,150–$2,850. The rest is labor, wire, a breaker and the permit. That part moves with distance and panel room.
Buying the charger yourself saves little. Install-only jobs run $590–$1,950 here. Electricians may not warranty a unit they didn't supply, and some utility rebates need an approved model. Check the list before you buy.
What's included in a Philadelphia EV charger quote (and what costs extra)
A standard install covers mounting the charger, a new breaker, up to about 25 feet of wire in conduit, the hookup and a test charge. The headline price usually leaves out:
- The permit and inspection: $50–$370, up to $730 in a few cities, unless the quote says it's included
- Panel work: load management $420–$1,550, or a 200-amp upgrade $1,600–$4,800
- Extra distance: $10–$30 per foot past the first 25 feet, and $15–$45 per foot for trenching
- Drywall patching and paint: often left to you after the wire is fished through walls
Get the breaker size and the charger's amp setting written on the invoice. The inspector will check that they match.
Your panel
Many Philadelphia homes built in the last 20–30 years have 200-amp panels with room for a 50- or 60-amp breaker. Older homes often don't. A load calculation decides it, and it should be on the quote.
Distance from the panel
Quotes usually assume about 25 feet of wire. Past that, each foot adds $10–$30, and long runs need thicker, pricier wire. A charger on the far side of the house runs $2,150–$4,800.
Panel room
A full panel means a load management device ($420–$1,550) or a 200-amp upgrade ($1,600–$4,800). The device slows or pauses charging when the house is busy, which is usually fine overnight.
Detached garage or outdoor post
Trenching runs $15–$45 per foot with conduit and wire, and a driveway post adds $530–$2,100. Outdoor chargers need a weather-rated enclosure.
Which charger
Budget 40–48 amp units cost $300–$600, a ChargePoint Home Flex $549–$750, and a Tesla Wall Connector $585 ($660 for the Universal model). A 48-amp charger needs a 60-amp circuit. Many cars can't charge faster than 32–40 amps, so buy for your car.
Permits and code
Most Pennsylvania cities want a permit and inspection for a new 240-volt circuit: $50–$370, up to $730 in a few cities here. The National Electrical Code (2020 and later) requires GFCI protection on EV charging outlets.
Location — Center City & Fishtown vs South Philly, Delco & the suburbs
Center City & Fishtown jobs mean older buildings, longer runs and building approval. South Philly, Delco & the suburbs jobs usually come in lower, with easier parking and access, though older homes there can still need panel work.
- Mount it near the panel.Every foot past 25 adds $10–$30. A charger on the panel wall with a longer cable is often the cheapest setup.
- Ask for load management before a panel upgrade.A device at $420–$1,550 often does the job of a $1,600–$4,800 upgrade.
- Check rebates before you buy.Many utilities require approval before the install or an approved charger model. The federal 30C home charger credit ended for chargers placed in service after June 30, 2026, so utility and state money is what's left.
- Match the charger to your car.If your car tops out at 32 or 40 amps, a 48-amp charger and 60-amp circuit buys you nothing.
- Sign up for an off-peak rate.The install is a one-time cost. Charging at night on an EV rate saves money every month.
- Get two quotes with the same scope.Same charger, same location, same breaker size, permit included. In Philadelphia that makes quotes easy to compare.
Get these in writing from any Philadelphia electrician before you pay a deposit:
- The load calculation result, and whether your panel has room
- Breaker size and the charger's amp setting
- Wire run length, and the per-foot price past it
- Which charger, and who supplies it
- Permit and inspection: included or extra
- Mounting: wall, outdoor or pedestal, with a weather rating
- Wall patching, trenching and restoration: who does it
- Warranty on labor, plus any utility rebate paperwork
How much does it cost to install an EV charger in Philadelphia?
$1,100–$2,950 for a Level 2 charger hardwired near the panel, charger included, and $1,850 is typical. A NEMA 14-50 outlet alone is $540–$1,500. A long run to the far side of the house is $2,150–$4,800.
How much is a Tesla Wall Connector installed in Philadelphia?
$1,200–$2,850, including the $585 charger (the Universal model is $660). Expect about $1,850 for a garage install near a panel with room.
How much does a NEMA 14-50 outlet cost in Philadelphia?
$540–$1,500 near the panel. Add a plug-in charger ($300–$750). The National Electrical Code (2020 and later) requires GFCI protection on EV charging outlets, which adds a little to the breaker cost.
Do I need a panel upgrade for an EV charger in Philadelphia?
Only if a load calculation says so. If it does, a load management device ($420–$1,550) is often enough. A full 200-amp upgrade costs $1,600–$4,800 and may need the utility to change the meter.
Is there a tax credit or rebate for a home EV charger in Philadelphia?
The federal 30C home charger credit ended for chargers placed in service after June 30, 2026, so a charger installed now gets no federal credit. Check your electric utility and state energy office. Many utilities pay rebates or bill credits, and some require approval before the install.
Do I need a permit for an EV charger in Philadelphia?
Usually, yes. A new 240-volt circuit needs an electrical permit and inspection in most of Pennsylvania. Budget $50–$370, up to $730 in a few cities. The permit protects your insurance and home sale.
How much does it cost to run a charger to a detached garage in Philadelphia?
About $2,000–$5,650 for a garage 60 feet away. Trenching with conduit and wire is $15–$45 per foot. Some garages also need a subpanel ($640–$2,650).
Level 1 or Level 2 charging in Philadelphia?
A Level 1 outlet ($160–$860) adds about 3–5 miles of range an hour, which is fine for 30–40 miles a day. Level 2 ($1,100–$2,950) adds about 25–44 miles an hour and refills most EVs overnight.
Can two EVs share one charger circuit in Philadelphia?
Yes. Power-sharing chargers split one circuit between two cars. A second charger set up that way runs $1,050–$3,150, often cheaper than a second 60-amp circuit.
How much does it cost to charge an EV at home?
About $58 a month for 1,000 miles at the 2026 US average home rate of 18.2 cents per kWh (EIA), assuming 0.32 kWh per mile. Your utility's rate and an off-peak EV plan move that up or down.
Prices verified November 2026 · Cross-referenced against 42+ American pricing sources · See methodology
Prices for the Philadelphia metro area, November 2026. Outer suburbs may vary.
Get a fair EV charger quote in Philadelphia
Local EV charger installers · Free quotes · No obligation, no spam.