How much does an electrician cost in Tampa?
By Our research team · Last verified · Methodology
Most electricians in Tampa charge $60–$135/hr for licensed work, with $95/hr typical. Expect a $130 service call on most visits and $120–$270/hr after hours.
How we get this data- Typical
- $95/hr
- Low end
- $50/hr
- High end
- $275/hr
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local electricians send you a real quote. Free, no obligation.
Get my fair quote →The typical Tampa price is $95/hr, 6% above the US typical of $90/hr.
Tampa's price band
Tampa is pricier than 67% of the 195 US metros we price for electrician work.
A licensed electrician in Tampa charges $60–$135 an hour, and $95/hr is typical. Small jobs — a new outlet, a GFCI, a ceiling fan — usually come in at $85–$460 once the service call is counted. Bigger work is priced by the job: a 100A to 200A panel upgrade is $1,550–$4,600 and a Level 2 EV charger install is $1,050–$2,750.
Tampa Bay's hurricane season keeps generator hookups, transfer switches and surge protectors in steady demand, and Tampa Electric (TECO) serves the city. Florida requires electrical contractors to be state-certified or locally registered.
Every price on this page assumes a licensed electrician and, where the work needs one, a permit. In Tampa that covers panel upgrades, new circuits, EV chargers and rewiring; small-job permits typically run $50–$355.
Comparing cities, or after the US-wide picture? See the national guide: Electrician cost in the USA.
$60–$135/hr for a licensed electrician in Tampa — typically $95/hr. A service call is $80–$205 and a 100A to 200A panel upgrade $1,550–$4,600. Verified November 2026. Get free Tampa quotes →
- Licensed electrician: $60–$135/hr ($95/hr typical)
- Service call: $80–$205; after hours: $120–$270/hr
- New outlet $155–$360; ceiling fan $145–$460; GFCI $95–$360
- Panel upgrade 100A to 200A: $1,550–$4,600; Level 2 EV charger: $1,050–$2,750
- Whole-house rewire (1,500–2,000 sq ft): $7,850–$25,050
Prices verified November 2026 · Cross-referenced against 52+ American pricing sources · See methodology
Licensed electrician, labor and basic materials included unless the row says otherwise. Tampa metro, re-verified November 2026. Permits and utility fees are extra.
| Service | Low | Typical | High |
|---|---|---|---|
| Electrician hourly rateper hour | $60per hour | $95 | $135 |
| Service call feeper visit | $80per visit | $130 | $205 |
| Troubleshooting visit (finding a fault)per visit | $160per visit | $290 | $515 |
| Emergency / after-hours call-out feeper call | $80per call | $160 | $205 |
| Emergency visit, all-in (call-out + first hour)per visit | $200per visit | $325 | $475 |
| After-hours hourly rateper hour | $120per hour | $165 | $270 |
| Electrician day rate (8 × the hourly rate)per day | $480per day | $760 | $1,100 |
| Replace an outlet (standard double outlet)per outlet | $85per outlet | $145 | $205 |
| New outlet install (new wire run)per outlet | $155per outlet | $260 | $360 |
| USB outlet replacementper outlet | $105per outlet | $155 | $205 |
| GFCI outlet or GFCI breakereach | $95each | $180 | $360 |
| Dimmer switch installeach | $85each | $145 | $205 |
| Ceiling fan installation (existing box)per fan | $145per fan | $265 | $460 |
| Pendant light installper light | $105per light | $210 | $410 |
| Recessed LED light (finished ceiling)per light | $130per light | $210 | $305 |
| Outdoor light fixture installper fixture | $80per fixture | $155 | $510 |
| Hardwired smoke detector (supply + install)each | $115each | $210 | $410 |
| Dedicated 240V circuit (dryer, range, AC)installed | $260installed | $625 | $1,250 |
| Level 2 EV charger install (standard charger included)installed | $1,050installed | $1,750 | $2,750 |
| Electrical panel upgrade (100A → 200A)installed | $1,550installed | $2,600 | $4,600 |
| 400A service upgradeinstalled | $4,100installed | $7,200 | $12,200 |
| Solar string inverter replacementinstalled | $1,500installed | $2,350 | $3,500 |
| Rewiring, per roomper room | $520per room | $1,850 | $3,600 |
| Whole-house rewire (about 1,500–2,000 sq ft)per home | $7,850per home | $14,600 | $25,050 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local electricians in Tampa
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need an electrician for?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the electricians who reply.
Where should they text you?
- Max 2 electricians. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched electricians see your number.
By continuing, you agree to our Terms and to up to 2 electricians contacting you by phone or text.
Check your phone
Prices verified November 2026 · Cross-referenced against 52+ American pricing sources · See methodology
Prices cover the Tampa metro — the city and its close suburbs. Far-out towns can add a trip charge; Downtown, Ybor & Seminole Heights jobs often run a little higher for parking and access.
Electrician rates across Tampa
Where you live moves the price a little, and the age of the house moves it a lot. Downtown, Ybor & Seminole Heights jobs carry parking and access costs; Carrollwood, Wesley Chapel & the suburbs sits near or below the city average.
Downtown, Ybor & Seminole Heights
- Hourly
- $75–$125/hr
- Typical job
- $2,300–$3,950 / panel upgrade
Often the oldest, densest part of the metro. Expect parking charges on the invoice, building rules on when work can happen, and more time fishing wire through older walls.
East Tampa & Brandon
- Hourly
- $70–$115/hr
- Typical job
- $2,100–$3,600 / panel upgrade
Residential streets with easy parking and average pricing. Homes built around 1965–1973 may have aluminum branch wiring, which needs special connectors.
St. Petersburg & Clearwater
- Hourly
- $75–$120/hr
- Typical job
- $2,150–$3,750 / panel upgrade
Lots of renovation work: panel upgrades, grounding fixes and new kitchen circuits. Quotes vary widely, so get two.
Carrollwood, Wesley Chapel & the suburbs
- Hourly
- $70–$115/hr
- Typical job
- $2,050–$3,550 / panel upgrade
Mostly single-family streets. Jobs can run longer because of attic and garage runs, but access is easy, so rates sit near the city average.
Real-world electrician costs in Tampa
Here's what common electrician jobs cost in Tampa in 2026, labor and basic materials included.
A dead outlet or tripping breaker — troubleshooting visit
The electrician tracks down the fault and fixes it if the fix is simple. Most Tampa shops charge a $80–$205 service call to start; a typical fault-finding visit is $160–$515 all in. A replacement GFCI adds about $95–$360 if that's the culprit.
Kitchen lighting — six recessed LED lights and two dimmers
Recessed lights in a finished ceiling run $130–$305 each in Tampa and dimmers $85–$205, so six lights and two dimmers come to $950–$2,250. Open ceilings in a remodel cost less per light; patching and paint are usually extra.
Level 2 EV charger in the garage
A standard home charger on its own 240V circuit, with the panel close by, runs $1,050–$2,750 installed. If the panel is full, either upgrade it ($1,550–$4,600) or ask whether a load-management device or a charger with built-in load sharing can avoid the upgrade.
Panel upgrade — 100A to 200A
New panel, new breakers, a permit and the utility meter pull: $1,550–$4,600 in Tampa, usually about a day of work plus any wait for the utility. A fuse box replaced with a breaker panel runs $1,550–$4,600; if the meter and service wires change too, ask whether the utility charges extra.
Rewire an older house (about 1,500–2,000 sq ft)
New wiring, outlets and switches throughout, usually with a panel upgrade: $7,850–$25,050 in Tampa, or $520–$3,600 a room if you go room by room. Budget another $1,050–$6,150 for patching plaster or drywall afterward.
How much does an electrician cost in Tampa?
$60–$135/hr, and $95/hr is the number most Tampa homeowners see on the invoice. On small jobs the hourly rate matters less than you'd think: the $130 service call and the one-hour minimum decide the bill. On big jobs the quote is a flat price.
For bigger work, ask for a fixed price. Tampa quotes run $1,050–$2,750 for a Level 2 EV charger, $1,550–$4,600 for a 200A panel upgrade and $520–$3,600 a room for rewiring, based on 52 sources checked in November 2026.
Electrician rates and fees in Tampa (2026)
Standard hourly rates run $60–$135, after-hours $120–$270, and a service call $80–$205.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Standard hourly rate | $60 | $95 | $135 |
| After-hours hourly rate | $120 | $165 | $270 |
| Service call fee | $80 | $130 | $205 |
| Troubleshooting visit | $160 | $290 | $515 |
| Emergency call-out fee | $80 | $160 | $205 |
| Emergency visit, all-in (call-out + first hour) | $200 | $325 | $475 |
| Electrician day rate (8 × the hourly rate) | $480 | $760 | $1,100 |
| Electrical permit, small job | $50 | $155 | $355 |
Standard vs after-hours in Tampa: $95/hr on a weekday against $165/hr at night or on a weekend, plus a $80–$205 call-out fee. Unless something is sparking, smoking or without power, book the weekday.
What moves an electrician's quote in Tampa:
- The age of the house — knob-and-tube, aluminum branch wiring or a fuse box turns a simple swap into a bigger job.
- Panel space — no room for a new breaker means a subpanel ($415–$1,800) or a panel upgrade ($1,550–$4,600).
- Access — finished walls, plaster and tight attics add hours; each drywall patch afterward adds $55–$410.
- Timing — after-hours work runs $120–$270/hr against $95/hr standard.
- Permits and the utility — permit fees run $50–$355 on small jobs, and panel work waits on the utility's meter pull.
Ask every Tampa electrician for the same four things: the service call fee, the hourly rate (or a flat price), whether the permit is included, and how surprises inside the walls are priced. Get a quote for your electrical work →
Electrical work cost in Tampa by job size
Small fixes are $85–$460, a mid-size job like a 240V circuit or an EV charger is $260–$2,750, and big jobs — a panel upgrade or a rewire — run $1,550–$25,050.
Worked example: getting a 1960s house in Tampa ready for an EV and a heat pump. A 200A panel upgrade at $2,600, a 240V circuit at $625, a Level 2 charger install at $1,750 and three GFCI outlets at $180 each comes to about $5,515.
An older house with original wiring is a bigger job: a whole-house rewire at $14,600, a panel upgrade at $2,600 and six hardwired smoke detectors at $210 each is about $18,460 before wall patching.
Tampa electrical panel jobs and what they cost
| Panel job | Cost | Best for |
|---|---|---|
| Panel upgrade, 100A → 200A | $1,550–$4,600 installed | Adding an EV charger, heat pump, hot tub or an addition to a 60–100A home |
| Add a subpanel | $415–$1,800 installed | Out of breaker spaces, or power for a garage, shop or addition |
| Smart panel (replaces the main panel) | $3,050–$9,600 installed | Circuit-by-circuit monitoring and control, often paired with solar, a battery or an EV |
| 400A service upgrade | $4,100–$12,200 installed | Large all-electric homes, two EV chargers plus heat pumps in Tampa |
| Replace a fuse box with a breaker panel | $1,550–$4,600 installed | Older homes still on fuses — often raised by insurers and home inspectors |
| Replace a Federal Pacific or Zinsco panel | $1,550–$4,050 installed | Panels that home inspectors and many insurers flag; never formally recalled, but widely replaced |
| Move the panel and meter | $1,050–$4,050 installed | Remodels, or a panel in a closet or bathroom that no longer meets code |
| Whole-home surge protector at the panel | $205–$810 installed | Any panel, and a must in lightning and storm country; required with a new panel or service where the 2020 or 2023 NEC is adopted |
| Generator interlock + inlet box | $415–$865 installed | Running a portable generator through the panel safely |
| Generator transfer switch | $410–$2,550 installed | Standby generators, or picking which circuits stay on in an outage |
| Add GFCI protection (outlet or breaker) | $95–$360 installed | Kitchens, baths, laundry, garages, basements and outdoor outlets, where code calls for it |
Hourly rate vs what you actually pay — the Tampa electrician bill
A $95/hr rate rarely shows up as $95 on the invoice. Most Tampa electricians charge a $80–$205 service call or a one-hour minimum, so swapping a single outlet costs $85–$205, not a few minutes of labor. Booking several small jobs in one visit spreads that fee.
Many shops quote flat prices instead of hours. A flat-rate small job — a fixture swap, a GFCI, a new switch — typically runs $160–$615 in Tampa. Compare the total, the permit and what happens if the electrician finds something unexpected, not the hourly headline.
What's included in an electrician's quote in Tampa (and what costs extra)
A standard quote covers labor, wire, boxes, breakers and basic devices, cleanup and, usually, pulling the permit. Often left out:
- The permit fee — $50–$355 on a small job, more for a panel upgrade or rewire
- Opening and patching walls — $55–$410 per drywall patch; painting is extra
- Fixtures and devices you choose — fans, smart switches and premium EV chargers (home chargers run $300 to $2,000) are often priced separately
- After-hours time — $120–$270/hr nights and weekends, plus a $80–$205 call-out fee on emergencies
Ask for the permit and inspection to be in the electrician's name. It's your proof the work was done to code.
Local wages
Federal data put the median electrician wage in the Tampa-St. Petersburg-Clearwater metro at $57,450 a year, about 9% below the US median of $63,190. Labor is most of an electrical bill, so local pay moves Tampa prices more than parts do.
The age of the house
Knob-and-tube wiring (common before the 1940s), aluminum branch wiring (homes built around 1965–1973) and Federal Pacific or Zinsco panels all add time and parts. An electrician may refuse to tie new work into old wiring until it's fixed.
Permits and inspections
Panel work, new circuits, EV chargers and rewiring usually need a permit. In Tampa a small-job permit typically runs $50–$355, and the electrician normally pulls it and meets the inspector.
Panel capacity
Many older homes have 100A service, which can't carry an EV charger, heat pump and electric range together. The fix is a 200A upgrade ($1,550–$4,600) or, sometimes, a load-management device that shares the capacity you already have.
Getting to the wires
Finished walls, plaster, low attics and crawlspaces add hours. Each drywall patch after a wire run adds $55–$410, and painting is usually on you.
When you need it
Nights, weekends and holidays cost $120–$270/hr in Tampa, plus a $80–$205 call-out fee. A true emergency is worth it; a dead outlet usually isn't.
Parts and equipment
A 200A panel itself costs a few hundred dollars and a home Level 2 charger $300 to $2,000, wherever you live. What changes from city to city is the labor, which is why a $1,550–$4,600 panel upgrade here differs from the US $1,500–$4,500.
- Batch small jobs into one visit.One $130 service call can cover three or four small fixes. Make a list — outlets, switches, a fixture — before the electrician arrives.
- Book weekday hours.After-hours rates in Tampa run $120–$270/hr against $95/hr standard. Unless it's unsafe or the power is out, wait for a weekday.
- Ask for a load calculation before a panel upgrade.Some homes can take an EV charger on the panel they have, and a load-management device can close a small gap for less than a $1,550–$4,600 upgrade. Ask the electrician to run the numbers first.
- Check utility and state rebates.Many utilities pay toward EV chargers, panel upgrades or heat-pump wiring. The federal home-charger tax credit ended for chargers placed in service after June 30, 2026, so check your utility and state programs before you book.
- Supply your own fixture.Most electricians will hang a fan or light you bought. Confirm the install price first, and buy fixtures listed by a recognized testing lab (UL or ETL).
- Get two quotes with the same scope.Make sure both include the permit, patching and cleanup, and say how surprises are priced. The cheaper quote often leaves one of those out.
Tampa electricians quote by the hour, by the job or both. Before you pay a deposit, get these in writing:
- The electrician's license number and proof of insurance
- A flat price or the hourly rate, plus the service call fee
- Exactly what's being installed — breaker sizes, wire, devices, fixture brand
- Who pulls the permit and whether the fee is included
- How surprises inside the walls (old wiring, no ground) will be priced
- Wall patching and cleanup — included or not
- Utility coordination for panel or meter work, and who pays any utility fee
- Warranty on labor, and the after-hours rate if the job runs late
How much does an electrician cost per hour in Tampa?
$60–$135/hr for a licensed electrician, and $95/hr is typical. After-hours work runs $120–$270/hr, and most shops charge a $80–$205 service call or a one-hour minimum.
What is the service call fee for an electrician in Tampa?
Usually $80–$205. It covers the trip and often the first part of the visit; some shops credit it toward the job if you go ahead. A troubleshooting visit to find a fault runs $160–$515.
How much does it cost to upgrade a panel from 100A to 200A in Tampa?
$1,550–$4,600, typically $2,600, including the panel, breakers and permit. A 400A service upgrade runs $4,100–$12,200, and the utility may charge for meter or service-wire work.
How much does it cost to install a Level 2 EV charger in Tampa?
$1,050–$2,750 installed with a standard charger, typically $1,750, if the panel has room. A full panel can add $1,550–$4,600 for an upgrade — ask about load management before you agree to one.
How much does it cost to rewire a house in Tampa?
$7,850–$25,050 for about 1,500–2,000 sq ft, or $520–$3,600 a room. Older plaster homes sit at the top of the range, and wall patching ($1,050–$6,150) is usually extra.
How much does it cost to add an outlet or hang a ceiling fan in Tampa?
A new outlet with a new wire run is $155–$360; replacing an existing outlet is $85–$205. Hanging a ceiling fan on an existing box is $145–$460.
Do I need a permit for electrical work in Tampa?
Usually, for anything beyond swapping a device: new circuits, panels, EV chargers, rewiring and service upgrades. Small-job permits typically run $50–$355, and your licensed electrician normally pulls them. Your city or county building department has the final word.
How much is an emergency electrician in Tampa?
$200–$475 for the call-out and first hour, then $120–$270/hr. If you smell burning, see sparks or have no power, call; for one dead outlet, a weekday visit is far cheaper.
Is there still a federal tax credit for electrical upgrades?
Mostly no. The home EV-charger credit (30C) ended for chargers placed in service after June 30, 2026, and the 25C credit, which covered panels of 200A or more installed with a qualifying heat pump, AC, furnace or water heater, up to $600, ended for improvements made after December 31, 2025. Utility and state rebates still exist in many places — check yours.
Should I replace a Federal Pacific or Zinsco panel in Tampa?
Most electricians and home inspectors recommend it, and some insurers require it. Replacement runs $1,550–$4,050 in Tampa. Neither brand was formally recalled, but both are widely reported to fail to trip.
Prices verified November 2026 · Cross-referenced against 52+ American pricing sources · See methodology
Prices for the Tampa metro area, November 2026. Outer suburbs may vary.
Get a fair electrician quote in Tampa
Local electricians · Free quotes · No obligation, no spam.