How much does a home battery cost in Pittsburgh?
By Our research team · Last verified · Methodology
Most home battery installs in Pittsburgh cost $11,750–$18,900 to put in one Powerwall 3-size battery (13.5 kWh). Most homeowners pay about $15,100; whole-home backup on two batteries runs $16,900–$34,800.
How we get this data- Typical
- $15,100
- Low end
- $9,200
- High end
- $23,550
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local battery installers send you a real quote. Free, no obligation.
Get my fair quote →The typical Pittsburgh price is $15,100, in line with the US typical of $14,750.
Pittsburgh's price band
Pittsburgh is pricier than 90% of the 195 US metros we price for home battery work.
Expect $11,750–$18,900 for one 13.5 kWh battery, $1,000–$3,600 more for whole-home backup, and $1,550–$4,600 more if a 100-amp panel has to go to 200 amps.
EnergySage's first-half-2026 quotes in Pennsylvania averaged $1,246 per kWh before incentives, about $12,450 for a typical 10 kWh system. That was above the national average of $1,159.
Prices are before incentives. The federal 30% battery credit is gone for 2026 installs (it ended for expenditures after December 31, 2025), so any help now comes from your utility or state. Check your utility for a battery or demand-response program before you sign.
Comparing cities, or after the US-wide picture? See the national guide: Home battery cost in the USA.
$11,750–$18,900 installed in Pittsburgh for one 13.5 kWh battery such as a Tesla Powerwall 3, typically $15,100. Whole-home backup on two batteries is $16,900–$34,800. Verified November 2026. Get free Pittsburgh quotes →
- One 13.5 kWh battery, installed: $11,750–$18,900 ($15,100 typical)
- Whole-home backup gateway: add $1,000–$3,600; two batteries: $16,900–$34,800
- Panel upgrade if needed: $1,550–$4,600; permit and utility fees: $150–$1,000
- No federal tax credit for batteries installed after December 31, 2025
- Tighter, older installs: Downtown, Strip District & Lawrenceville; easier garage installs: South Hills & the suburbs
Prices verified November 2026 · Cross-referenced against 57+ American pricing sources · See methodology
Installed prices before any utility or state incentive. Pittsburgh metro, re-verified November 2026. Comparison lines (generators, power stations) are shown so you can weigh the options.
| Service | Low | Typical | High |
|---|---|---|---|
| Tesla Powerwall 3 (13.5 kWh), installedinstalled | $11,750installed | $15,100 | $18,900 |
| Powerwall 3 Expansion unit (13.5 kWh), added at installinstalled | $5,100installed | $6,600 | $8,150 |
| Second battery added at install (Powerwall 3 or aPower 2)installed | $9,150installed | $10,200 | $12,750 |
| Enphase IQ Battery 5P (5 kWh), per unitinstalled | $6,150installed | $7,150 | $9,200 |
| Enphase IQ Battery 10C (10 kWh)installed | $11,250installed | $13,800 | $17,350 |
| FranklinWH aPower 2 (15 kWh) with aGateinstalled | $14,800installed | $18,400 | $23,500 |
| SolarEdge Home Battery (9.7 kWh)installed | $12,250installed | $15,650 | $20,450 |
| Other ~10 kWh battery (EG4, EcoFlow, Fox ESS, Canadian Solar)installed | $6,650installed | $11,250 | $16,850 |
| Two batteries for whole-home backup (27–30 kWh)installed | $16,900installed | $23,550 | $34,800 |
| Battery added to existing solar (AC-coupled)installed | $12,300installed | $15,600 | $19,950 |
| Battery without solar (charges from the grid)installed | $11,750installed | $15,100 | $18,900 |
| Whole-home backup gateway or transfer switchinstalled | $1,000installed | $1,850 | $3,600 |
| Critical-loads subpanel (partial backup)installed | $410installed | $1,000 | $1,800 |
| Main panel upgrade for a battery (100A to 200A)installed | $1,550installed | $2,550 | $4,600 |
| Permit and utility interconnection feesper job | $150per job | $460 | $1,000 |
| Battery service visit (monitoring, firmware, re-commissioning)per visit | $150per visit | $360 | $820 |
| Out-of-warranty battery replacement (remove old, install new)installed | $10,750installed | $14,100 | $17,900 |
| Standby generator, 20–24 kW (for comparison)installed | $8,650installed | $11,700 | $16,300 |
| Portable power station + home transfer panel, about 4 kWh (for comparison)installed | $4,050installed | $5,550 | $7,550 |
| Portable generator hookup: interlock kit and inletinstalled | $410installed | $630 | $870 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local battery installers in Pittsburgh
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need a price on?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the battery installers who reply.
Where should they text you?
- Max 2 battery installers. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched battery installers see your number.
By continuing, you agree to our Terms and to up to 2 battery installers contacting you by phone or text.
Check your phone
Prices verified November 2026 · Cross-referenced against 57+ American pricing sources · See methodology
Figures cover the Pittsburgh metro area. Jobs in Downtown, Strip District & Lawrenceville can run a little higher; garage installs in South Hills & the suburbs sit closer to the typical price.
Home battery prices across Pittsburgh
Same battery, four price bands. The spread comes from panels, wall space and access: tighter and older in Downtown, Strip District & Lawrenceville, easier in South Hills & the suburbs.
Downtown, Strip District & Lawrenceville
- Installed
- $12,700–$20,050 installed
- Typical job
- $13,750–$23,850 / one battery + whole-home backup
Older buildings, tight utility rooms and slower permit reviews. Batteries often end up on an outside wall, and condo or HOA approval can add weeks.
East End & Homewood
- Installed
- $12,200–$19,300 installed
- Typical job
- $13,250–$22,950 / one battery + whole-home backup
Mixed older housing. Many homes need a subpanel for partial backup; the battery price is standard but the electrical work varies.
North Side & Hill District
- Installed
- $11,500–$17,950 installed
- Typical job
- $12,500–$21,400 / one battery + whole-home backup
Lots of rentals, so fewer battery jobs. Owners pay standard metro prices, and smaller homes often need only partial backup.
South Hills & the suburbs
- Installed
- $11,750–$18,900 installed
- Typical job
- $12,750–$22,500 / one battery + whole-home backup
Bigger homes with garages make the install itself easy, but more homeowners here ask for whole-home backup, which adds a gateway or a second battery.
Real home battery jobs in Pittsburgh
Here's what common home battery jobs cost in Pittsburgh in 2026, installed, before incentives.
Essentials backup: one battery + critical-loads panel
Fridge, furnace fan, lights, Wi-Fi and a few outlets on one 13.5 kWh battery. The battery is $11,750–$18,900 installed; moving those circuits to a critical-loads subpanel adds $410–$1,800.
Whole-home backup: one battery + gateway
A whole-home gateway or transfer switch ($1,000–$3,600) lets one battery run the whole panel during an outage. Central AC or a well pump may still need a second battery to start reliably.
Bigger home: two batteries
27–30 kWh for larger homes or longer outages. A Powerwall 3 plus an expansion unit sits at the low end; two full units or two FranklinWH aPower 2s sit at the top.
Adding a battery to solar you already have
An AC-coupled battery works next to your existing inverter. Expect $12,300–$15,600 for a straightforward job; older inverters or a full panel push it toward $19,950.
Older home: battery + panel upgrade
Many 100-amp panels have no room for a battery. Going to 200 amps adds $1,550–$4,600 in Pittsburgh, and doing it with the battery means one permit and one inspection.
How much does a home battery cost in Pittsburgh?
Between $11,750 and $18,900 for one 13.5 kWh battery, installed, and most Pittsburgh homeowners pay close to $15,100. Three things set the number: how much of the house you back up, whether the panel needs work, and the brand. Partial backup on a good 200-amp panel lands near the low end; whole-home backup with a gateway and a panel upgrade can pass $20,750.
There is no federal credit to take off these numbers any more. What can still cut the bill in Pittsburgh is a utility or state battery program, a second bid, and not buying more battery than you need. Two batteries ($16,900–$34,800) is more than many homes need. Figures re-verified against 57 sources in November 2026.
Home battery prices in Pittsburgh (2026): the lines on a quote
One battery is $11,750–$18,900 installed, whole-home backup adds $1,000–$3,600, and a panel upgrade adds $1,550–$4,600.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Tesla Powerwall 3 (13.5 kWh), installed | $11,750 | $15,100 | $18,900 |
| Expansion unit, added at install | $5,100 | $6,600 | $8,150 |
| Whole-home backup gateway | $1,000 | $1,850 | $3,600 |
| Critical-loads subpanel | $410 | $1,000 | $1,800 |
| Main panel upgrade (100A to 200A) | $1,550 | $2,550 | $4,600 |
| Permit and utility fees | $150 | $460 | $1,000 |
| Battery service visit | $150 | $360 | $820 |
| Standby generator, 20–24 kW (comparison) | $8,650 | $11,700 | $16,300 |
The battery is the biggest line, but it is not where Pittsburgh quotes differ most. Compare the gateway, panel and permit lines; one bid may include all three and another none.
What moves a home battery quote in Pittsburgh:
- Backup level — partial backup on a backup switch is cheapest; whole-home backup adds a gateway and often a second battery.
- The panel — a full or 100-amp panel can add $1,550–$4,600 for an upgrade.
- Where it mounts — a garage or outside wall near the panel is cheapest; long wire runs and trenching add labor.
- Brand and size — a 5 kWh Enphase unit and a 15 kWh FranklinWH are very different checks.
- Permits and the utility — $150–$1,000 in fees, plus the wait for permission to operate.
Ask every Pittsburgh installer for the same four things: the battery price, the backup equipment (switch, gateway or subpanel), the panel work, and permit and utility fees. Compare those lines, not the total. Get a quote for your battery install →
Home Battery Cost in Pittsburgh by Backup Level
Essentials backup on one battery is $11,750–$18,900, whole-home backup with a gateway is $12,750–$22,500, and two batteries for a larger home are $16,900–$34,800, before any utility incentive.
Worked example: a Pittsburgh home with a 200-amp panel and a garage wall next to it gets one Powerwall 3 at $15,100 plus a whole-home gateway at $1,850: $16,950. The same house with a 100-amp panel adds an upgrade at $2,550, for $19,500.
A larger home that wants central AC on backup usually needs two batteries ($23,550 typical) plus the gateway, about $25,400. For comparison, a 20–24 kW standby generator runs $8,650–$16,300 installed in Pittsburgh, plus fuel.
Pittsburgh Home Battery Costs by Battery
| Battery | Cost | Best for |
|---|---|---|
| Tesla Powerwall 3 — 13.5 kWh | $11,750–$18,900 installed | One box for whole-home backup · 10 yrs, 70% capacity |
| Powerwall 3 Expansion — adds 13.5 kWh | $5,100–$8,150 installed | More hours of backup on the same inverter |
| Enphase IQ Battery 5P — 5 kWh each | $6,150–$9,200 installed | Stacking small units on Enphase solar · 15-yr warranty |
| Enphase IQ Battery 10C — 10 kWh | $11,250–$17,350 installed | Enphase homes wanting one larger unit · 15 yrs, 60% capacity |
| FranklinWH aPower 2 — 15 kWh | $14,800–$23,500 installed | Big loads and long outages · 15 yrs, 70% capacity |
| SolarEdge Home Battery — 9.7 kWh | $12,250–$20,450 installed | Homes with SolarEdge inverters · 10 yrs, 70% capacity |
| Other ~10 kWh batteries | $6,650–$16,850 installed | Lower upfront price; check local installer support |
| Two batteries — 27–30 kWh | $16,900–$34,800 installed | Larger homes, central AC, well pumps |
| Standby generator, 20–24 kW (comparison) | $8,650–$16,300 installed | Outages that last days, homes with natural gas |
Battery vs installation: where a Pittsburgh quote goes
The battery itself is about $8,200–$10,000 for a Powerwall 3 anywhere in the US. On a $15,100 Pittsburgh job that leaves roughly $6,000 for labor, wiring, the backup switch or gateway, permits and the utility paperwork.
That is why Pittsburgh bids for the same battery can sit $7,150 apart. One installer's $15,100 may include a whole-home gateway and permit fees; another's $13,900 may not. Line up the items before you compare totals.
What's included in a Pittsburgh battery quote (and what costs extra)
A standard quote covers the battery, mounting, wiring to your panel, a basic backup switch, commissioning and the app setup. The headline price often leaves out:
- Whole-home backup gateway — $1,000–$3,600 if you want the whole panel backed up
- Panel upgrade — $1,550–$4,600 to go from 100 to 200 amps
- Critical-loads subpanel — $410–$1,800 for partial backup on older panels
- Permit and utility fees — $150–$1,000, plus bollards or a heat alarm if the battery goes in a garage
Ask for the warranty terms in writing: years, capacity guaranteed at the end, and who services the battery locally.
Your local market
Pittsburgh is a large metro with a deep bench of solar and battery installers. The hardware price is national; labor, permits and how many installers compete for the job are local, and they decide whether a quote lands nearer $11,750 or $18,900.
How much of the house you back up
Partial backup on one battery is $11,750–$18,900. Whole-home backup adds a gateway ($1,000–$3,600) and, in bigger homes, a second battery.
Your electrical panel
A crowded or 100-amp panel is the most common surprise. Upgrading to 200 amps adds $1,550–$4,600 in Pittsburgh; a critical-loads subpanel adds $410–$1,800.
Where the battery goes
Garages and outside walls are the usual spots. Model codes keep batteries out of bedrooms and living space, cap garage installs at 80 kWh, and call for impact protection where a car could hit the unit.
Brand and capacity
An Enphase IQ 5P is $6,150–$9,200 per 5 kWh unit, a Powerwall 3 $11,750–$18,900 for 13.5 kWh, and a FranklinWH aPower 2 $14,800–$23,500 for 15 kWh.
Solar or no solar
A battery added to existing solar is $12,300–$19,950; a grid-charged battery with no solar is $11,750–$18,900. A battery installed with new solar shares one permit and one crew.
Permits and the utility in Pittsburgh
Expect $150–$1,000 in permit and interconnection fees and a wait for the utility's permission to operate if the battery ties into solar.
- Get two or three bids.Same battery, different labor lines. Pittsburgh quotes for one 13.5 kWh battery run $11,750–$18,900; a second bid is the fastest way to find the padding.
- Back up the essentials, not the whole house.A critical-loads subpanel ($410–$1,800) keeps one battery on the circuits that matter. A second battery costs $9,150–$12,750.
- Ask about your utility's battery program.Programs that pay you to share the battery at peak times can return a few hundred dollars a year or more.
- Add storage at install time.An expansion unit added with the first battery is $5,100–$8,150. Coming back later means a second trip, a second permit and often a second full battery.
- Do the panel work with the battery.A 200-amp upgrade ($1,550–$4,600) done in the same job shares the permit, the inspection and the utility visit.
- Read the warranty before you pick a brand.Powerwall 3 and SolarEdge carry 10 years at 70% capacity; Enphase and FranklinWH carry 15 years. A longer warranty can be worth a higher price.
Before you pay a deposit to a Pittsburgh installer, get these in writing:
- The battery brand, model and usable kWh
- Backup type: partial (backup switch or subpanel) or whole-home (gateway)
- Any panel upgrade or subpanel, priced as its own line
- Where the battery mounts, and any bollards or heat alarm the code needs
- Permit, inspection and utility interconnection fees
- Warranty: years, capacity guaranteed and who services it locally
- Monitoring app setup and any utility program enrollment
- Payment schedule, and what happens if the utility approval is delayed
How much does a home battery cost in Pittsburgh?
$11,750–$18,900 installed for one 13.5 kWh battery, and $15,100 is typical. Whole-home backup adds $1,000–$3,600 for a gateway, and two batteries run $16,900–$34,800.
How much is a Tesla Powerwall 3 in Pittsburgh?
About $15,100 installed, within a $11,750–$18,900 range. An expansion unit adds 13.5 kWh for $5,100–$8,150 when it goes in with the first battery.
What does whole-home battery backup cost in Pittsburgh?
$12,750–$22,500 for one battery with a whole-home gateway, or $16,900–$34,800 for two batteries in a larger home or one with central AC.
Is there still a federal tax credit for home batteries in Pittsburgh?
No. The 30% Residential Clean Energy Credit ended for expenditures made after December 31, 2025, and the IRS treats the expense as made when installation is complete. Ask your utility about battery or demand-response programs instead.
How much does it cost to add a battery to existing solar in Pittsburgh?
$12,300–$19,950 for an AC-coupled battery next to your existing inverter. A battery without any solar, charging from the grid, is $11,750–$18,900.
Do I need a panel upgrade for a battery in Pittsburgh?
Not always. Many 200-amp panels take a battery as they are. A full or 100-amp panel may need an upgrade ($1,550–$4,600) or a critical-loads subpanel ($410–$1,800).
Home battery or standby generator in Pittsburgh?
A 20–24 kW standby generator is $8,650–$16,300 installed and runs as long as the fuel lasts. A battery is $11,750–$18,900, is silent, needs no fuel and can cut bills on time-of-use rates, but covers hours to a day or so per 13.5 kWh unless solar recharges it.
How much do Enphase and FranklinWH batteries cost in Pittsburgh?
Enphase IQ Battery 5P: $6,150–$9,200 per 5 kWh unit; IQ Battery 10C: $11,250–$17,350. FranklinWH aPower 2 (15 kWh): $14,800–$23,500, installed.
What permits does a home battery need in Pittsburgh?
An electrical permit at minimum, often a building or fire review, and your utility's approval if the battery ties into solar or can send power to the grid. Fees run $150–$1,000. Garage installs may need a heat alarm and bollards.
How long does a home battery last, and what does upkeep cost?
Warranties run 10 years (Powerwall 3, SolarEdge) to 15 years (Enphase, FranklinWH), guaranteeing 60–70% capacity at the end. Upkeep is mostly app monitoring; a service visit costs $150–$820 once the warranty is over.
Prices verified November 2026 · Cross-referenced against 57+ American pricing sources · See methodology
Prices for the Pittsburgh metro area, November 2026. Outer suburbs may vary.
Get a fair home battery quote in Pittsburgh
Local battery installers · Free quotes · No obligation, no spam.