How much does an electrician cost in Sacramento?
By Our research team · Last verified · Methodology
Most electricians in Sacramento charge $70–$150/hr with $110/hr the going rate for a licensed electrician. A service call runs $90–$220, and a 100A to 200A panel upgrade $1,700–$4,800.
How we get this data- Typical
- $110/hr
- Low end
- $60/hr
- High end
- $320/hr
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local electricians send you a real quote. Free, no obligation.
Get my fair quote →The typical Sacramento price is $110/hr, 22% above the US typical of $90/hr.
Sacramento's price band
Sacramento is pricier than 86% of the 195 US metros we price for electrician work.
A licensed electrician in Sacramento charges $70–$150 an hour, and $110/hr is typical. Small jobs — a new outlet, a GFCI, a ceiling fan — usually come in at $95–$500 once the service call is counted. Bigger work is priced by the job: a 100A to 200A panel upgrade is $1,700–$4,800 and a Level 2 EV charger install is $1,100–$2,850.
SMUD, Sacramento's community-owned utility, serves most of the county and handles the meter side of service upgrades. Summer heat puts big AC loads on older panels, so panel capacity is a common question before adding an EV charger or heat pump.
Panel upgrades, new circuits and EV chargers usually need a permit in Sacramento, and the electrician normally pulls it. Ask whether the quote includes the permit — on a small job it adds $55–$360.
Comparing cities, or after the US-wide picture? See the national guide: Electrician cost in the USA.
$70–$150/hr for a licensed electrician in Sacramento — typically $110/hr. A service call is $90–$220 and a 100A to 200A panel upgrade $1,700–$4,800. Verified November 2026. Get free Sacramento quotes →
- Licensed electrician: $70–$150/hr ($110/hr typical)
- Service call: $90–$220; after hours: $140–$300/hr
- New outlet $180–$385; ceiling fan $170–$500; GFCI $105–$380
- Panel upgrade 100A to 200A: $1,700–$4,800; Level 2 EV charger: $1,100–$2,850
- Whole-house rewire (1,500–2,000 sq ft): $8,800–$26,600
Prices verified November 2026 · Cross-referenced against 52+ American pricing sources · See methodology
Licensed electrician, labor and basic materials included unless the row says otherwise. Sacramento metro, re-verified November 2026. Permits and utility fees are extra.
| Service | Low | Typical | High |
|---|---|---|---|
| Electrician hourly rateper hour | $70per hour | $110 | $150 |
| Service call feeper visit | $90per visit | $155 | $220 |
| Troubleshooting visit (finding a fault)per visit | $185per visit | $335 | $555 |
| Emergency / after-hours call-out feeper call | $90per call | $185 | $220 |
| Emergency visit, all-in (call-out + first hour)per visit | $230per visit | $380 | $520 |
| After-hours hourly rateper hour | $140per hour | $195 | $300 |
| Electrician day rate (8 × the hourly rate)per day | $560per day | $880 | $1,200 |
| Replace an outlet (standard double outlet)per outlet | $95per outlet | $165 | $220 |
| New outlet install (new wire run)per outlet | $180per outlet | $295 | $385 |
| USB outlet replacementper outlet | $120per outlet | $175 | $220 |
| GFCI outlet or GFCI breakereach | $105each | $200 | $380 |
| Dimmer switch installeach | $95each | $165 | $220 |
| Ceiling fan installation (existing box)per fan | $170per fan | $305 | $500 |
| Pendant light installper light | $120per light | $240 | $440 |
| Recessed LED light (finished ceiling)per light | $145per light | $235 | $325 |
| Outdoor light fixture installper fixture | $85per fixture | $175 | $540 |
| Hardwired smoke detector (supply + install)each | $125each | $230 | $430 |
| Dedicated 240V circuit (dryer, range, AC)installed | $290installed | $700 | $1,300 |
| Level 2 EV charger install (standard charger included)installed | $1,100installed | $1,900 | $2,850 |
| Electrical panel upgrade (100A → 200A)installed | $1,700installed | $2,850 | $4,800 |
| 400A service upgradeinstalled | $4,500installed | $7,850 | $12,750 |
| Solar string inverter replacementinstalled | $1,550installed | $2,400 | $3,600 |
| Rewiring, per roomper room | $590per room | $2,050 | $3,800 |
| Whole-house rewire (about 1,500–2,000 sq ft)per home | $8,800per home | $16,450 | $26,600 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local electricians in Sacramento
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need an electrician for?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the electricians who reply.
Where should they text you?
- Max 2 electricians. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched electricians see your number.
By continuing, you agree to our Terms and to up to 2 electricians contacting you by phone or text.
Check your phone
Prices verified November 2026 · Cross-referenced against 52+ American pricing sources · See methodology
Prices cover the Sacramento metro — the city and its close suburbs. Far-out towns can add a trip charge; Downtown, Midtown & Oak Park jobs often run a little higher for parking and access.
Electrician rates across Sacramento
Same trade, four price bands. Rates run highest in Downtown, Midtown & Oak Park, older housing in South Sacramento brings more panel and wiring work, and Elk Grove, Roseville & the suburbs is usually the cheapest place to book.
Downtown, Midtown & Oak Park
- Hourly
- $90–$145/hr
- Typical job
- $2,500–$4,200 / panel upgrade
Dense blocks, older buildings and paid parking. Condo and HOA boards often want insurance papers and set work hours, and running new circuits through finished walls takes longer.
South Sacramento
- Hourly
- $85–$135/hr
- Typical job
- $2,350–$4,000 / panel upgrade
A busy area for remodels and flips, so permit inspections are routine. Ask whether the quote covers bringing old circuits up to code once walls are open.
North Sacramento & Del Paso
- Hourly
- $80–$130/hr
- Typical job
- $2,300–$3,850 / panel upgrade
Residential streets with easy parking and average pricing. Homes built around 1965–1973 may have aluminum branch wiring, which needs special connectors.
Elk Grove, Roseville & the suburbs
- Hourly
- $80–$125/hr
- Typical job
- $2,250–$3,750 / panel upgrade
Mostly single-family homes; newer ones usually have 200A panels. EV chargers, generator hookups and long wire runs to garages are common jobs, and electricians may add a trip charge for distance.
Real-world electrician costs in Sacramento
Here's what common electrician jobs cost in Sacramento in 2026, labor and basic materials included.
A dead outlet or tripping breaker — troubleshooting visit
The electrician tracks down the fault and fixes it if the fix is simple. Most Sacramento shops charge a $90–$220 service call to start; a typical fault-finding visit is $185–$555 all in. A replacement GFCI adds about $105–$380 if that's the culprit.
Kitchen lighting — six recessed LED lights and two dimmers
Recessed lights in a finished ceiling run $145–$325 each in Sacramento and dimmers $95–$220, so six lights and two dimmers come to $1,050–$2,400. Open ceilings in a remodel cost less per light; patching and paint are usually extra.
Level 2 EV charger in the garage
A standard home charger on its own 240V circuit, with the panel close by, runs $1,100–$2,850 installed. If the panel is full, either upgrade it ($1,700–$4,800) or ask whether a load-management device or a charger with built-in load sharing can avoid the upgrade.
Panel upgrade — 100A to 200A
New panel, new breakers, a permit and the utility meter pull: $1,700–$4,800 in Sacramento, usually about a day of work plus any wait for the utility. A fuse box replaced with a breaker panel runs $1,700–$4,800; if the meter and service wires change too, ask whether the utility charges extra.
Rewire an older house (about 1,500–2,000 sq ft)
New wiring, outlets and switches throughout, usually with a panel upgrade: $8,800–$26,600 in Sacramento, or $590–$3,800 a room if you go room by room. Budget another $1,200–$6,600 for patching plaster or drywall afterward.
How much does an electrician cost in Sacramento?
A licensed electrician in Sacramento bills $70–$150 an hour, about $110 typical. Older homes take longer — plaster walls, old wiring, no room in the panel — so the same job can cost more in South Sacramento than in a newer suburb.
Flat-rate jobs are where most of the money goes. In Sacramento, a 100A to 200A panel upgrade runs $1,700–$4,800, a dedicated 240V circuit $290–$1,300, and a whole-house rewire of a 1,500–2,000 sq ft home $8,800–$26,600 — checked against 52 sources in November 2026.
Electrician rates and fees in Sacramento (2026)
Standard hourly rates run $70–$150, after-hours $140–$300, and a service call $90–$220.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Standard hourly rate | $70 | $110 | $150 |
| After-hours hourly rate | $140 | $195 | $300 |
| Service call fee | $90 | $155 | $220 |
| Troubleshooting visit | $185 | $335 | $555 |
| Emergency call-out fee | $90 | $185 | $220 |
| Emergency visit, all-in (call-out + first hour) | $230 | $380 | $520 |
| Electrician day rate (8 × the hourly rate) | $560 | $880 | $1,200 |
| Electrical permit, small job | $55 | $160 | $360 |
An emergency visit in Sacramento costs $230–$520 before any parts — the call-out fee plus the first after-hours hour. If the problem is one dead circuit and the rest of the house works, waiting for a weekday slot saves most of that.
What moves an electrician's quote in Sacramento:
- The age of the house — knob-and-tube, aluminum branch wiring or a fuse box turns a simple swap into a bigger job.
- Panel space — no room for a new breaker means a subpanel ($460–$1,900) or a panel upgrade ($1,700–$4,800).
- Access — finished walls, plaster and tight attics add hours; each drywall patch afterward adds $60–$440.
- Timing — after-hours work runs $140–$300/hr against $110/hr standard.
- Permits and the utility — permit fees run $55–$360 on small jobs, and panel work waits on the utility's meter pull.
Ask every Sacramento electrician for the same four things: the service call fee, the hourly rate (or a flat price), whether the permit is included, and how surprises inside the walls are priced. Get a quote for your electrical work →
Electrical work cost in Sacramento by job size
Small fixes are $95–$500, a mid-size job like a 240V circuit or an EV charger is $290–$2,850, and big jobs — a panel upgrade or a rewire — run $1,700–$26,600.
Worked example: getting a 1960s house in Sacramento ready for an EV and a heat pump. A 200A panel upgrade at $2,850, a 240V circuit at $700, a Level 2 charger install at $1,900 and three GFCI outlets at $200 each comes to about $6,050.
An older house with original wiring is a bigger job: a whole-house rewire at $16,450, a panel upgrade at $2,850 and six hardwired smoke detectors at $230 each is about $20,680 before wall patching.
Sacramento electrical panel jobs and what they cost
| Panel job | Cost | Best for |
|---|---|---|
| Panel upgrade, 100A → 200A | $1,700–$4,800 installed | Adding an EV charger, heat pump, hot tub or an addition to a 60–100A home |
| Add a subpanel | $460–$1,900 installed | Out of breaker spaces, or power for a garage, shop or addition |
| Smart panel (replaces the main panel) | $3,250–$9,850 installed | Circuit-by-circuit monitoring and control, often paired with solar, a battery or an EV |
| 400A service upgrade | $4,500–$12,750 installed | Large all-electric homes, two EV chargers plus heat pumps in Sacramento |
| Replace a fuse box with a breaker panel | $1,700–$4,800 installed | Older homes still on fuses — often raised by insurers and home inspectors |
| Replace a Federal Pacific or Zinsco panel | $1,700–$4,250 installed | Panels that home inspectors and many insurers flag; never formally recalled, but widely replaced |
| Move the panel and meter | $1,150–$4,300 installed | Remodels, or a panel in a closet or bathroom that no longer meets code |
| Whole-home surge protector at the panel | $220–$845 installed | Any panel, and a must in lightning and storm country; required with a new panel or service where the 2020 or 2023 NEC is adopted |
| Generator interlock + inlet box | $455–$905 installed | Running a portable generator through the panel safely |
| Generator transfer switch | $450–$2,650 installed | Standby generators, or picking which circuits stay on in an outage |
| Add GFCI protection (outlet or breaker) | $105–$380 installed | Kitchens, baths, laundry, garages, basements and outdoor outlets, where code calls for it |
Hourly rate vs what you actually pay — the Sacramento electrician bill
A $110/hr rate rarely shows up as $110 on the invoice. Most Sacramento electricians charge a $90–$220 service call or a one-hour minimum, so swapping a single outlet costs $95–$220, not a few minutes of labor. Booking several small jobs in one visit spreads that fee.
Many shops quote flat prices instead of hours. A flat-rate small job — a fixture swap, a GFCI, a new switch — typically runs $185–$665 in Sacramento. Compare the total, the permit and what happens if the electrician finds something unexpected, not the hourly headline.
What's included in an electrician's quote in Sacramento (and what costs extra)
A standard quote covers labor, wire, boxes, breakers and basic devices, cleanup and, usually, pulling the permit. Often left out:
- The permit fee — $55–$360 on a small job, more for a panel upgrade or rewire
- Opening and patching walls — $60–$440 per drywall patch; painting is extra
- Fixtures and devices you choose — fans, smart switches and premium EV chargers (home chargers run $300 to $2,000) are often priced separately
- After-hours time — $140–$300/hr nights and weekends, plus a $90–$220 call-out fee on emergencies
Ask for the permit and inspection to be in the electrician's name. It's your proof the work was done to code.
Local wages
Federal data put the median electrician wage in the Sacramento-Roseville-Folsom metro at $74,830 a year, about 18% above the US median of $63,190. Labor is most of an electrical bill, so local pay moves Sacramento prices more than parts do.
The age of the house
Knob-and-tube wiring (common before the 1940s), aluminum branch wiring (homes built around 1965–1973) and Federal Pacific or Zinsco panels all add time and parts. An electrician may refuse to tie new work into old wiring until it's fixed.
Permits and inspections
Panel work, new circuits, EV chargers and rewiring usually need a permit. In Sacramento a small-job permit typically runs $55–$360, and the electrician normally pulls it and meets the inspector.
Panel capacity
Many older homes have 100A service, which can't carry an EV charger, heat pump and electric range together. The fix is a 200A upgrade ($1,700–$4,800) or, sometimes, a load-management device that shares the capacity you already have.
Getting to the wires
Finished walls, plaster, low attics and crawlspaces add hours. Each drywall patch after a wire run adds $60–$440, and painting is usually on you.
When you need it
Nights, weekends and holidays cost $140–$300/hr in Sacramento, plus a $90–$220 call-out fee. A true emergency is worth it; a dead outlet usually isn't.
Parts and equipment
A 200A panel itself costs a few hundred dollars and a home Level 2 charger $300 to $2,000, wherever you live. What changes from city to city is the labor, which is why a $1,700–$4,800 panel upgrade here differs from the US $1,500–$4,500.
- Batch small jobs into one visit.One $155 service call can cover three or four small fixes. Make a list — outlets, switches, a fixture — before the electrician arrives.
- Book weekday hours.After-hours rates in Sacramento run $140–$300/hr against $110/hr standard. Unless it's unsafe or the power is out, wait for a weekday.
- Ask for a load calculation before a panel upgrade.Some homes can take an EV charger on the panel they have, and a load-management device can close a small gap for less than a $1,700–$4,800 upgrade. Ask the electrician to run the numbers first.
- Check utility and state rebates.Many utilities pay toward EV chargers, panel upgrades or heat-pump wiring. The federal home-charger tax credit ended for chargers placed in service after June 30, 2026, so check your utility and state programs before you book.
- Supply your own fixture.Most electricians will hang a fan or light you bought. Confirm the install price first, and buy fixtures listed by a recognized testing lab (UL or ETL).
- Get two quotes with the same scope.Make sure both include the permit, patching and cleanup, and say how surprises are priced. The cheaper quote often leaves one of those out.
Sacramento electricians quote by the hour, by the job or both. Before you pay a deposit, get these in writing:
- The electrician's license number and proof of insurance
- A flat price or the hourly rate, plus the service call fee
- Exactly what's being installed — breaker sizes, wire, devices, fixture brand
- Who pulls the permit and whether the fee is included
- How surprises inside the walls (old wiring, no ground) will be priced
- Wall patching and cleanup — included or not
- Utility coordination for panel or meter work, and who pays any utility fee
- Warranty on labor, and the after-hours rate if the job runs late
How much does an electrician cost per hour in Sacramento?
$70–$150/hr for a licensed electrician, and $110/hr is typical. After-hours work runs $140–$300/hr, and most shops charge a $90–$220 service call or a one-hour minimum.
What is the service call fee for an electrician in Sacramento?
Usually $90–$220. It covers the trip and often the first part of the visit; some shops credit it toward the job if you go ahead. A troubleshooting visit to find a fault runs $185–$555.
How much does it cost to upgrade a panel from 100A to 200A in Sacramento?
$1,700–$4,800, typically $2,850, including the panel, breakers and permit. A 400A service upgrade runs $4,500–$12,750, and the utility may charge for meter or service-wire work.
How much does it cost to install a Level 2 EV charger in Sacramento?
$1,100–$2,850 installed with a standard charger, typically $1,900, if the panel has room. A full panel can add $1,700–$4,800 for an upgrade — ask about load management before you agree to one.
How much does it cost to rewire a house in Sacramento?
$8,800–$26,600 for about 1,500–2,000 sq ft, or $590–$3,800 a room. Older plaster homes sit at the top of the range, and wall patching ($1,200–$6,600) is usually extra.
How much does it cost to add an outlet or hang a ceiling fan in Sacramento?
A new outlet with a new wire run is $180–$385; replacing an existing outlet is $95–$220. Hanging a ceiling fan on an existing box is $170–$500.
Do I need a permit for electrical work in Sacramento?
Usually, for anything beyond swapping a device: new circuits, panels, EV chargers, rewiring and service upgrades. Small-job permits typically run $55–$360, and your licensed electrician normally pulls them. Your city or county building department has the final word.
How much is an emergency electrician in Sacramento?
$230–$520 for the call-out and first hour, then $140–$300/hr. If you smell burning, see sparks or have no power, call; for one dead outlet, a weekday visit is far cheaper.
Is there still a federal tax credit for electrical upgrades?
Mostly no. The home EV-charger credit (30C) ended for chargers placed in service after June 30, 2026, and the 25C credit, which covered panels of 200A or more installed with a qualifying heat pump, AC, furnace or water heater, up to $600, ended for improvements made after December 31, 2025. Utility and state rebates still exist in many places — check yours.
Should I replace a Federal Pacific or Zinsco panel in Sacramento?
Most electricians and home inspectors recommend it, and some insurers require it. Replacement runs $1,700–$4,250 in Sacramento. Neither brand was formally recalled, but both are widely reported to fail to trip.
Prices verified November 2026 · Cross-referenced against 52+ American pricing sources · See methodology
Prices for the Sacramento metro area, November 2026. Outer suburbs may vary.
Get a fair electrician quote in Sacramento
Local electricians · Free quotes · No obligation, no spam.