How much does an electrician cost in San Francisco?
By Our research team · Last verified · Methodology
Most electricians in San Francisco charge $110–$200/hr for licensed work, with $155/hr typical. Expect a $215 service call on most visits and $220–$400/hr after hours.
How we get this data- Typical
- $155/hr
- Low end
- $95/hr
- High end
- $450/hr
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local electricians send you a real quote. Free, no obligation.
Get my fair quote →The typical San Francisco price is $155/hr, 72% above the US typical of $90/hr.
San Francisco's price band
San Francisco is pricier than 99% of the 195 US metros we price for electrician work.
A licensed electrician in San Francisco charges $110–$200 an hour, and $155/hr is typical. Small jobs — a new outlet, a GFCI, a ceiling fan — usually come in at $130–$605 once the service call is counted. Bigger work is priced by the job: a 100A to 200A panel upgrade is $2,150–$5,500 and a Level 2 EV charger install is $1,350–$3,200.
San Francisco's Department of Building Inspection permits most electrical work, and PG&E coordination can add weeks to a panel or service upgrade. PG&E's EV charger rebate has covered up to half the cost of a pre-approved Level 2 charger, with more for income-qualified homes — check current terms.
Panel upgrades, new circuits and EV chargers usually need a permit in San Francisco, and the electrician normally pulls it. Ask whether the quote includes the permit — on a small job it adds $60–$390.
Comparing cities, or after the US-wide picture? See the national guide: Electrician cost in the USA.
$110–$200/hr for a licensed electrician in San Francisco — typically $155/hr. A service call is $130–$270 and a 100A to 200A panel upgrade $2,150–$5,500. Verified November 2026. Get free San Francisco quotes →
- Licensed electrician: $110–$200/hr ($155/hr typical)
- Service call: $130–$270; after hours: $220–$400/hr
- New outlet $240–$455; ceiling fan $235–$605; GFCI $140–$450
- Panel upgrade 100A to 200A: $2,150–$5,500; Level 2 EV charger: $1,350–$3,200
- Whole-house rewire (1,500–2,000 sq ft): $11,750–$31,400
Prices verified November 2026 · Cross-referenced against 52+ American pricing sources · See methodology
Licensed electrician, labor and basic materials included unless the row says otherwise. San Francisco metro, re-verified November 2026. Permits and utility fees are extra.
| Service | Low | Typical | High |
|---|---|---|---|
| Electrician hourly rateper hour | $110per hour | $155 | $200 |
| Service call feeper visit | $130per visit | $215 | $270 |
| Troubleshooting visit (finding a fault)per visit | $260per visit | $475 | $680 |
| Emergency / after-hours call-out feeper call | $130per call | $260 | $270 |
| Emergency visit, all-in (call-out + first hour)per visit | $350per visit | $530 | $670 |
| After-hours hourly rateper hour | $220per hour | $270 | $400 |
| Electrician day rate (8 × the hourly rate)per day | $880per day | $1,250 | $1,600 |
| Replace an outlet (standard double outlet)per outlet | $130per outlet | $225 | $260 |
| New outlet install (new wire run)per outlet | $240per outlet | $405 | $455 |
| USB outlet replacementper outlet | $160per outlet | $235 | $260 |
| GFCI outlet or GFCI breakereach | $140each | $270 | $450 |
| Dimmer switch installeach | $125each | $220 | $260 |
| Ceiling fan installation (existing box)per fan | $235per fan | $420 | $605 |
| Pendant light installper light | $165per light | $330 | $530 |
| Recessed LED light (finished ceiling)per light | $195per light | $310 | $380 |
| Outdoor light fixture installper fixture | $115per fixture | $225 | $625 |
| Hardwired smoke detector (supply + install)each | $165each | $300 | $500 |
| Dedicated 240V circuit (dryer, range, AC)installed | $385installed | $925 | $1,550 |
| Level 2 EV charger install (standard charger included)installed | $1,350installed | $2,300 | $3,200 |
| Electrical panel upgrade (100A → 200A)installed | $2,150installed | $3,600 | $5,500 |
| 400A service upgradeinstalled | $5,600installed | $9,800 | $14,400 |
| Solar string inverter replacementinstalled | $1,700installed | $2,650 | $3,750 |
| Rewiring, per roomper room | $790per room | $2,750 | $4,500 |
| Whole-house rewire (about 1,500–2,000 sq ft)per home | $11,750per home | $21,900 | $31,400 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local electricians in San Francisco
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need an electrician for?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the electricians who reply.
Where should they text you?
- Max 2 electricians. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched electricians see your number.
By continuing, you agree to our Terms and to up to 2 electricians contacting you by phone or text.
Check your phone
Prices verified November 2026 · Cross-referenced against 52+ American pricing sources · See methodology
Figures cover the San Francisco metro area. Older housing and tight access in SoMa & the Mission push jobs toward the top of each range.
Electrician rates across San Francisco
Same trade, four price bands. Rates run highest in SoMa & the Mission, older housing in Oakland & the East Bay brings more panel and wiring work, and Daly City & the Peninsula is usually the cheapest place to book.
SoMa & the Mission
- Hourly
- $130–$195/hr
- Typical job
- $3,150–$5,000 / panel upgrade
Dense blocks, older buildings and paid parking. Condo and HOA boards often want insurance papers and set work hours, and running new circuits through finished walls takes longer.
Oakland & the East Bay
- Hourly
- $125–$185/hr
- Typical job
- $3,000–$4,750 / panel upgrade
A remodel-heavy area. Where houses are older, two-prong outlets, undersized panels and even knob-and-tube can turn up, so ask how surprises are priced before work starts.
Daly City & the Peninsula
- Hourly
- $115–$175/hr
- Typical job
- $2,800–$4,450 / panel upgrade
Plenty of newer houses with modern panels. Expect EV charger, lighting and surge-protector work at average rates, plus travel time for farther-out addresses.
Richmond, Vallejo & North Bay
- Hourly
- $110–$165/hr
- Typical job
- $2,650–$4,200 / panel upgrade
The cheapest hourly rates in the metro, with travel time sometimes billed. Rural and edge-of-town homes may need longer service runs and trenching.
Real-world electrician costs in San Francisco
Here's what common electrician jobs cost in San Francisco in 2026, labor and basic materials included.
A dead outlet or tripping breaker — troubleshooting visit
The electrician tracks down the fault and fixes it if the fix is simple. Most San Francisco shops charge a $130–$270 service call to start; a typical fault-finding visit is $260–$680 all in. A replacement GFCI adds about $140–$450 if that's the culprit.
Kitchen lighting — six recessed LED lights and two dimmers
Recessed lights in a finished ceiling run $195–$380 each in San Francisco and dimmers $125–$260, so six lights and two dimmers come to $1,400–$2,800. Open ceilings in a remodel cost less per light; patching and paint are usually extra.
Level 2 EV charger in the garage
A standard home charger on its own 240V circuit, with the panel close by, runs $1,350–$3,200 installed. If the panel is full, either upgrade it ($2,150–$5,500) or ask whether a load-management device or a charger with built-in load sharing can avoid the upgrade.
Panel upgrade — 100A to 200A
New panel, new breakers, a permit and the utility meter pull: $2,150–$5,500 in San Francisco, usually about a day of work plus any wait for the utility. A fuse box replaced with a breaker panel runs $2,150–$5,500; if the meter and service wires change too, ask whether the utility charges extra.
Rewire an older house (about 1,500–2,000 sq ft)
New wiring, outlets and switches throughout, usually with a panel upgrade: $11,750–$31,400 in San Francisco, or $790–$4,500 a room if you go room by room. Budget another $1,650–$7,950 for patching plaster or drywall afterward.
How much does an electrician cost in San Francisco?
$110–$200/hr, and $155/hr is the number most San Francisco homeowners see on the invoice. On small jobs the hourly rate matters less than you'd think: the $215 service call and the one-hour minimum decide the bill. On big jobs the quote is a flat price.
For bigger work, ask for a fixed price. San Francisco quotes run $1,350–$3,200 for a Level 2 EV charger, $2,150–$5,500 for a 200A panel upgrade and $790–$4,500 a room for rewiring, based on 52 sources checked in November 2026.
Electrician rates and fees in San Francisco (2026)
Standard hourly rates run $110–$200, after-hours $220–$400, and a service call $130–$270.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Standard hourly rate | $110 | $155 | $200 |
| After-hours hourly rate | $220 | $270 | $400 |
| Service call fee | $130 | $215 | $270 |
| Troubleshooting visit | $260 | $475 | $680 |
| Emergency call-out fee | $130 | $260 | $270 |
| Emergency visit, all-in (call-out + first hour) | $350 | $530 | $670 |
| Electrician day rate (8 × the hourly rate) | $880 | $1,250 | $1,600 |
| Electrical permit, small job | $60 | $185 | $390 |
Standard vs after-hours in San Francisco: $155/hr on a weekday against $270/hr at night or on a weekend, plus a $130–$270 call-out fee. Unless something is sparking, smoking or without power, book the weekday.
What moves an electrician's quote in San Francisco:
- The age of the house — knob-and-tube, aluminum branch wiring or a fuse box turns a simple swap into a bigger job.
- Panel space — no room for a new breaker means a subpanel ($590–$2,150) or a panel upgrade ($2,150–$5,500).
- Access — finished walls, plaster and tight attics add hours; each drywall patch afterward adds $85–$530.
- Timing — after-hours work runs $220–$400/hr against $155/hr standard.
- Permits and the utility — permit fees run $60–$390 on small jobs, and panel work waits on the utility's meter pull.
Ask every San Francisco electrician for the same four things: the service call fee, the hourly rate (or a flat price), whether the permit is included, and how surprises inside the walls are priced. Get a quote for your electrical work →
Electrical work cost in San Francisco by job size
Small fixes are $130–$605, a mid-size job like a 240V circuit or an EV charger is $385–$3,200, and big jobs — a panel upgrade or a rewire — run $2,150–$31,400.
Worked example: getting a 1960s house in San Francisco ready for an EV and a heat pump. A 200A panel upgrade at $3,600, a 240V circuit at $925, a Level 2 charger install at $2,300 and three GFCI outlets at $270 each comes to about $7,635.
An older house with original wiring is a bigger job: a whole-house rewire at $21,900, a panel upgrade at $3,600 and six hardwired smoke detectors at $300 each is about $27,300 before wall patching.
San Francisco electrical panel jobs and what they cost
| Panel job | Cost | Best for |
|---|---|---|
| Panel upgrade, 100A → 200A | $2,150–$5,500 installed | Adding an EV charger, heat pump, hot tub or an addition to a 60–100A home |
| Add a subpanel | $590–$2,150 installed | Out of breaker spaces, or power for a garage, shop or addition |
| Smart panel (replaces the main panel) | $3,750–$10,700 installed | Circuit-by-circuit monitoring and control, often paired with solar, a battery or an EV |
| 400A service upgrade | $5,600–$14,400 installed | Large all-electric homes, two EV chargers plus heat pumps in San Francisco |
| Replace a fuse box with a breaker panel | $2,150–$5,500 installed | Older homes still on fuses — often raised by insurers and home inspectors |
| Replace a Federal Pacific or Zinsco panel | $2,150–$4,850 installed | Panels that home inspectors and many insurers flag; never formally recalled, but widely replaced |
| Move the panel and meter | $1,450–$4,950 installed | Remodels, or a panel in a closet or bathroom that no longer meets code |
| Whole-home surge protector at the panel | $270–$945 installed | Any panel, and a must in lightning and storm country; required with a new panel or service where the 2020 or 2023 NEC is adopted |
| Generator interlock + inlet box | $575–$1,050 installed | Running a portable generator through the panel safely |
| Generator transfer switch | $560–$3,000 installed | Standby generators, or picking which circuits stay on in an outage |
| Add GFCI protection (outlet or breaker) | $140–$450 installed | Kitchens, baths, laundry, garages, basements and outdoor outlets, where code calls for it |
Hourly rate vs what you actually pay — the San Francisco electrician bill
A $155/hr rate rarely shows up as $155 on the invoice. Most San Francisco electricians charge a $130–$270 service call or a one-hour minimum, so swapping a single outlet costs $130–$260, not a few minutes of labor. Booking several small jobs in one visit spreads that fee.
Many shops quote flat prices instead of hours. A flat-rate small job — a fixture swap, a GFCI, a new switch — typically runs $260–$815 in San Francisco. Compare the total, the permit and what happens if the electrician finds something unexpected, not the hourly headline.
What's included in an electrician's quote in San Francisco (and what costs extra)
A standard quote covers labor, wire, boxes, breakers and basic devices, cleanup and, usually, pulling the permit. Often left out:
- The permit fee — $60–$390 on a small job, more for a panel upgrade or rewire
- Opening and patching walls — $85–$530 per drywall patch; painting is extra
- Fixtures and devices you choose — fans, smart switches and premium EV chargers (home chargers run $300 to $2,000) are often priced separately
- After-hours time — $220–$400/hr nights and weekends, plus a $130–$270 call-out fee on emergencies
Ask for the permit and inspection to be in the electrician's name. It's your proof the work was done to code.
Local wages
Federal data put the median electrician wage in the San Francisco-Oakland-Fremont metro at $92,830 a year, about 47% above the US median of $63,190. Labor is most of an electrical bill, so local pay moves San Francisco prices more than parts do.
The age of the house
Knob-and-tube wiring (common before the 1940s), aluminum branch wiring (homes built around 1965–1973) and Federal Pacific or Zinsco panels all add time and parts. An electrician may refuse to tie new work into old wiring until it's fixed.
Permits and inspections
Panel work, new circuits, EV chargers and rewiring usually need a permit. In San Francisco a small-job permit typically runs $60–$390, and the electrician normally pulls it and meets the inspector.
Panel capacity
Many older homes have 100A service, which can't carry an EV charger, heat pump and electric range together. The fix is a 200A upgrade ($2,150–$5,500) or, sometimes, a load-management device that shares the capacity you already have.
Getting to the wires
Finished walls, plaster, low attics and crawlspaces add hours. Each drywall patch after a wire run adds $85–$530, and painting is usually on you.
When you need it
Nights, weekends and holidays cost $220–$400/hr in San Francisco, plus a $130–$270 call-out fee. A true emergency is worth it; a dead outlet usually isn't.
Parts and equipment
A 200A panel itself costs a few hundred dollars and a home Level 2 charger $300 to $2,000, wherever you live. What changes from city to city is the labor, which is why a $2,150–$5,500 panel upgrade here differs from the US $1,500–$4,500.
- Batch small jobs into one visit.One $215 service call can cover three or four small fixes. Make a list — outlets, switches, a fixture — before the electrician arrives.
- Book weekday hours.After-hours rates in San Francisco run $220–$400/hr against $155/hr standard. Unless it's unsafe or the power is out, wait for a weekday.
- Ask for a load calculation before a panel upgrade.Some homes can take an EV charger on the panel they have, and a load-management device can close a small gap for less than a $2,150–$5,500 upgrade. Ask the electrician to run the numbers first.
- Check utility and state rebates.Many utilities pay toward EV chargers, panel upgrades or heat-pump wiring. The federal home-charger tax credit ended for chargers placed in service after June 30, 2026, so check your utility and state programs before you book.
- Supply your own fixture.Most electricians will hang a fan or light you bought. Confirm the install price first, and buy fixtures listed by a recognized testing lab (UL or ETL).
- Get two quotes with the same scope.Make sure both include the permit, patching and cleanup, and say how surprises are priced. The cheaper quote often leaves one of those out.
San Francisco electricians quote by the hour, by the job or both. Before you pay a deposit, get these in writing:
- The electrician's license number and proof of insurance
- A flat price or the hourly rate, plus the service call fee
- Exactly what's being installed — breaker sizes, wire, devices, fixture brand
- Who pulls the permit and whether the fee is included
- How surprises inside the walls (old wiring, no ground) will be priced
- Wall patching and cleanup — included or not
- Utility coordination for panel or meter work, and who pays any utility fee
- Warranty on labor, and the after-hours rate if the job runs late
How much does an electrician cost per hour in San Francisco?
$110–$200/hr for a licensed electrician, and $155/hr is typical. After-hours work runs $220–$400/hr, and most shops charge a $130–$270 service call or a one-hour minimum.
What is the service call fee for an electrician in San Francisco?
Usually $130–$270. It covers the trip and often the first part of the visit; some shops credit it toward the job if you go ahead. A troubleshooting visit to find a fault runs $260–$680.
How much does it cost to upgrade a panel from 100A to 200A in San Francisco?
$2,150–$5,500, typically $3,600, including the panel, breakers and permit. A 400A service upgrade runs $5,600–$14,400, and the utility may charge for meter or service-wire work.
How much does it cost to install a Level 2 EV charger in San Francisco?
$1,350–$3,200 installed with a standard charger, typically $2,300, if the panel has room. A full panel can add $2,150–$5,500 for an upgrade — ask about load management before you agree to one.
How much does it cost to rewire a house in San Francisco?
$11,750–$31,400 for about 1,500–2,000 sq ft, or $790–$4,500 a room. Older plaster homes sit at the top of the range, and wall patching ($1,650–$7,950) is usually extra.
How much does it cost to add an outlet or hang a ceiling fan in San Francisco?
A new outlet with a new wire run is $240–$455; replacing an existing outlet is $130–$260. Hanging a ceiling fan on an existing box is $235–$605.
Do I need a permit for electrical work in San Francisco?
Usually, for anything beyond swapping a device: new circuits, panels, EV chargers, rewiring and service upgrades. Small-job permits typically run $60–$390, and your licensed electrician normally pulls them. Your city or county building department has the final word.
How much is an emergency electrician in San Francisco?
$350–$670 for the call-out and first hour, then $220–$400/hr. If you smell burning, see sparks or have no power, call; for one dead outlet, a weekday visit is far cheaper.
Is there still a federal tax credit for electrical upgrades?
Mostly no. The home EV-charger credit (30C) ended for chargers placed in service after June 30, 2026, and the 25C credit, which covered panels of 200A or more installed with a qualifying heat pump, AC, furnace or water heater, up to $600, ended for improvements made after December 31, 2025. Utility and state rebates still exist in many places — check yours.
Should I replace a Federal Pacific or Zinsco panel in San Francisco?
Most electricians and home inspectors recommend it, and some insurers require it. Replacement runs $2,150–$4,850 in San Francisco. Neither brand was formally recalled, but both are widely reported to fail to trip.
Prices verified November 2026 · Cross-referenced against 52+ American pricing sources · See methodology
Prices for the San Francisco metro area, November 2026. Outer suburbs may vary.
Get a fair electrician quote in San Francisco
Local electricians · Free quotes · No obligation, no spam.