How much does a plumber cost in Seattle?
By Our research team · Last verified · Methodology
Plumbers in Seattle charge $110–$230 an hour for standard daytime work, with $150/hr the going rate. Most quotes add a $110–$400 service call, and weeknight after-hours work runs $190–$450/hr.
How we get this data- Typical
- $150/hr
- Low end
- $70/hr
- High end
- $680/hr
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local plumbers send you a real quote. Free, no obligation.
Get my fair quote →The typical Seattle price is $150/hr, 50% above the US typical of $100/hr.
Seattle's price band
Seattle is pricier than 99% of the 195 US metros we price for plumber work.
Small repairs in Seattle — a clogged sink, a running toilet, a dripping faucet — usually land at $100–$500. A new gas water heater is $1,250–$3,550 installed, and an after-hours emergency visit starts around $370 before any repair.
Seattle permits cost $132 plus $26 per fixture, and plumbers say older homes in Capitol Hill, Queen Anne and Wallingford need extra labor. Washington's plumbing code requires water heaters to be strapped for earthquakes.
Rates here are weekday daytime rates for licensed plumbers. The service call ($110–$400 in Seattle) is the fee most people don't expect; ask whether it is credited to the job.
Comparing cities, or after the US-wide picture? See the national guide: Plumber cost in the USA.
$110–$230/hr for a plumber in Seattle — typically $150/hr. A service call is $110–$400, a clogged drain $140–$500, and a gas water heater $1,250–$3,550 installed. Verified November 2026. Get free Seattle quotes →
- Hourly rate: $110–$230 ($150 typical) for a licensed plumber on a weekday
- Service call $110–$400; weeknight after-hours $190–$450/hr
- Clogged drain $140–$500; toilet repair $100–$500
- Tank water heater installed: $910–$3,550
- Highest rates in Downtown, SoDo & Capitol Hill; lower in Eastside & Tacoma
Prices verified November 2026 · Cross-referenced against 50+ American pricing sources · See methodology
Weekday daytime prices unless the row says otherwise. Installed rows include a standard unit or fixture. Seattle metro, re-verified November 2026. Permits are extra where required.
| Service | Low | Typical | High |
|---|---|---|---|
| General plumbing, hourly rate (weekday daytime)/hr | $110/hr | $150 | $230 |
| Service call / trip feeflat | $110flat | $220 | $400 |
| Leaky faucet repairper job | $140per job | $340 | $570 |
| Clogged drain, snake / auger (sink, tub or shower)per job | $140per job | $290 | $500 |
| Main line clog: camera inspection + hydro-jettingper job | $540per job | $1,200 | $2,440 |
| Toilet repair (leak, clog or running)per job | $100per job | $270 | $500 |
| Toilet installation (standard toilet supplied + installed)installed | $450installed | $770 | $1,300 |
| Gas tank water heater (40–50 gal), installedinstalled | $1,250installed | $2,300 | $3,550 |
| Electric tank water heater (40–50 gal), installedinstalled | $910installed | $1,700 | $2,850 |
| Heat pump water heater (50 gal), installedinstalled | $2,150installed | $3,550 | $5,950 |
| Gas line to one appliance (range, dryer or grill)per appliance | $400per appliance | $860 | $2,000 |
| Burst pipe repair (pipe only, no water damage)per job | $360per job | $860 | $3,550 |
| Faucet replacement (standard faucet included)installed | $230installed | $390 | $850 |
| Bathroom rough-in (toilet, sink, shower or tub)per bathroom | $2,100per bathroom | $3,500 | $7,000 |
| Emergency / after-hours visit (call-out + first hour)per visit | $370per visit | $590 | $1,100 |
| After-hours hourly rate (weeknights)/hr | $190/hr | $260 | $450 |
| Fixture set / trim-out after tile (one bathroom, labor)per bathroom | $730per bathroom | $1,400 | $2,200 |
| Toilet relocation (new drain position)per job | $1,400per job | $3,500 | $8,400 |
| Laundry room plumbing (rough-in + washer hookups)per job | $560per job | $1,100 | $2,800 |
| Faucet cartridge or washer replacementper job | $140per job | $250 | $460 |
| Toilet fill valve or flapper replacementper job | $100per job | $190 | $290 |
| Dishwasher installation (hookup to existing lines)per job | $220per job | $330 | $580 |
| Garbage disposal installation (unit included)installed | $310installed | $560 | $1,050 |
| Whole-house repipe with PEX (2-bath home)per house | $6,200per house | $11,000 | $20,650 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local plumbers in Seattle
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need a plumber for?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the plumbers who reply.
Where should they text you?
- Max 2 plumbers. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched plumbers see your number.
By continuing, you agree to our Terms and to up to 2 plumbers contacting you by phone or text.
Check your phone
Prices verified November 2026 · Cross-referenced against 50+ American pricing sources · See methodology
Figures cover the Seattle metro area. Downtown, SoDo & Capitol Hill runs at the top of these ranges; outlying towns can add a trip charge of $75–$440.
Plumber rates across Seattle
Where you live changes the bill a little, not a lot. Downtown, SoDo & Capitol Hill costs most because of access and building rules; Eastside & Tacoma is usually cheapest, though trip fees can apply.
Downtown, SoDo & Capitol Hill
- Hourly
- $120–$230/hr
- Typical job
- $160–$450 / small repair
Denser blocks with condos, apartments and mixed-use buildings. Plumbers price in parking and the time it takes to get building access or shut water off for more than one unit.
Ballard, Fremont & Georgetown
- Hourly
- $120–$230/hr
- Typical job
- $150–$430 / small repair
Houses, apartments and converted buildings side by side. Small jobs are priced near the city average, and remodel work books up early.
South Seattle & Rainier Valley
- Hourly
- $110–$230/hr
- Typical job
- $140–$410 / small repair
Established neighborhoods with a mix of home ages. Expect the city's going rate; in an older home, a camera inspection is worth it before any big drain repair.
Eastside & Tacoma
- Hourly
- $110–$220/hr
- Typical job
- $140–$390 / small repair
Many homes are newer, with plastic (PEX or CPVC) supply pipe and more bathrooms. Hourly rates match the city, but drive time and trip fees can add to small jobs.
Real plumbing costs in Seattle
Here's what common plumber jobs cost in Seattle in 2026, at weekday rates with parts and labor.
Running toilet or dripping faucet — 30 to 60 minutes
A new flapper or fill valve is $100–$290 in Seattle; a faucet cartridge or washer is $140–$460. Most companies price these flat, and the service call is often folded in.
Clogged kitchen or bathroom drain — weekday visit
A plumber snakes the line and checks it drains. Seattle quotes run $140–$500; if the clog is in the main line, a camera and hydro-jetting job is $540–$2,440.
Water heater dies — replace a 40–50 gallon tank
Electric tank: $910–$2,850 installed. Gas tank: $1,250–$3,550, with venting and the gas connection checked. A heat pump water heater is $2,150–$5,950. Haul-away and the permit should be in the price — ask.
Burst pipe on a Saturday night
The emergency visit is $370–$1,100 for the call-out and first hour, then $190–$450/hr on weeknights and more on weekends. The pipe repair itself is $360–$3,550. Shut the main valve first — every minute of running water adds to the drywall bill, which is separate.
Bathroom remodel — rough-in plus trim-out
Rough-in for a toilet, sink and shower is $2,100–$7,000, and setting the fixtures after tile is $730–$2,200. Moving the toilet to a new spot adds $1,400–$8,400.
How much does a plumber cost in Seattle?
Between $110 and $230 an hour for a licensed plumber in Seattle, and most homeowners pay about $150. Three things set the number: who comes out (a journeyman at $90–$170/hr or a master plumber at $120–$300/hr), when they come, and whether the company bills by the hour or quotes a flat price per job.
The big-ticket lines are where quotes vary most. A gas water heater in Seattle runs $1,250–$3,550 installed, a heat pump water heater $2,150–$5,950, and a whole-house PEX repipe $6,200–$20,650. Prices were re-verified against 50 sources in November 2026.
Plumber fees in Seattle (2026): hourly rates vs fixed quotes
Daytime hourly rates run $110–$230, weeknight after-hours $190–$450/hr, and a service call $110–$400. These are the fee lines that show up on Seattle invoices.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Standard hourly rate | $110 | $150 | $230 |
| After-hours hourly rate (weeknights) | $190 | $260 | $450 |
| Service call fee (often credited to the repair) | $110 | $220 | $400 |
| Emergency call-out fee | $220 | $370 | $590 |
| Trip charge, outside the service area | $75 | $150 | $440 |
| Flat-rate small job (clog, toilet, faucet) | $140 | $320 | $570 |
| Plumbing permit (water heater or small job) | $50 | $130 | $300 |
| Yearly maintenance plan | $130 | $250 | $380 |
The service call is the line to ask about first. In Seattle it runs $110–$400; many companies credit it to the repair if you go ahead, and some waive it for plan members. Ask before the plumber drives out.
What moves a plumbing quote in Seattle:
- Time of day — weeknights run $190–$450/hr, and weekends and holidays more, against $150/hr on a weekday.
- Who comes out — a journeyman at $90–$170/hr or a master plumber at $120–$300/hr.
- Access — pipe behind tile, under a slab or in a crawl space adds hours to the same repair.
- Old pipe — galvanized supply lines and cast iron drains can crack when disturbed, and a small fix can turn into a section replacement.
- Parts and permits — the water heater, faucet or toilet you choose, and the city permit for water heaters, gas and new pipe.
Ask every Seattle plumber the same four things: the service call fee and whether it's credited, the hourly or flat price, what parts are included, and whether the permit is in the quote. Get a quote for your plumbing job →
Plumber cost in Seattle by job size
A small repair is $100–$500, a water heater $910–$3,550, a bathroom rough-in $2,100–$7,000, and a whole-house PEX repipe $6,200–$20,650 in Seattle.
Worked example: a weekday visit in Seattle to fix a running toilet ($190 typical) and snake a slow tub drain ($290 typical) is about $480 at typical flat prices. Book both on one visit so you pay one service call. The same two jobs on a Saturday night start near $880.
Bigger homes cost more only on whole-house work. A 2-bath PEX repipe is $6,200–$20,650 here; a bigger 3-bath, 2-story house costs more because there are more walls to open. A full bathroom remodel — rough-in at $3,500 and trim-out at $1,400 typical — lands near $4,900 in plumbing alone.
Who to hire for plumbing in Seattle
| Who to hire | Cost | Best for |
|---|---|---|
| Handyman (minor fixes only) | $75–$150/hr | A flapper, a faucet you bought, caulking — small work where no permit is needed |
| Apprentice (under a licensed plumber) | $70–$140/hr | Helper on bigger jobs — usually billed inside the company's rate |
| Licensed journeyman plumber | $90–$170/hr | Most repairs: leaks, drains, toilets, faucets, water heater swaps |
| Master plumber | $120–$300/hr | Permit work, gas lines, remodels and code problems |
| 24/7 emergency service | $190–$680/hr | Burst pipes, sewage backing up, no water at night or on a holiday |
| Drain-cleaning company | $140–$500 per drain | Clogs, roots and main lines — camera and jetting gear on the truck |
| Flat-rate company or franchise | $140–$570 per small job | Price agreed before work starts; compare it with an hourly quote |
| Plumbing contractor (remodel bid) | $2,100–$7,000 per bathroom | Rough-in and trim-out for a remodel or a new bathroom |
Hourly rate vs what you actually pay — the Seattle plumbing bill
A $150/hr headline becomes $370 the moment a plumber spends an hour on a $220 service call, and more once parts are added. Many companies also bill a one-hour minimum, so a 20-minute fix still costs the full hour.
Flat-rate pricing turns that into one number before work starts: $140–$570 for most small Seattle jobs. It costs a little more on quick fixes and saves money when the job runs long. Either way, compare the total quote — call fee, labor, parts and permit — not the hourly rate.
What's included in a Seattle plumbing quote (and what costs extra)
A standard quote covers the plumber's time, normal fittings and supply lines, and cleanup of the work area. The headline price often leaves out:
- The service call — $110–$400 unless it's credited to the repair
- The permit — usually $50–$300 for a water heater or small job, more for remodels
- Haul-away — removing an old water heater or toilet is sometimes a separate charge
- Wall, ceiling or floor repair — plumbers open drywall and tile to reach pipe but rarely patch it
Ask for the quote in writing, with the part numbers and the warranty on labor.
The plumber's license level
A licensed journeyman in Seattle bills about $90–$170/hr; a master plumber $120–$300/hr. Masters pull permits and handle gas, remodels and code problems. Most repairs don't need one on site.
Nights, weekends and holidays
After-hours work runs $190–$450/hr on weeknights, and more on weekends and holidays, plus a call-out fee of $220–$590. If you can shut the water off and wait for a weekday, you'll often pay about half as much.
Access to the pipe
An open basement is quick. Pipe behind tile, under a slab, in a tight crawl space or inside a finished ceiling adds hours — and drywall or tile repair, which plumbers usually don't include.
Older homes and old pipe
Galvanized supply pipe, cast iron drains and old clay sewer lines are common in older homes. They can break when a plumber works near them, so a small job may grow. Ask what pipe they expect to find.
Parts and equipment
The plumber's labor is only part of a water heater, toilet or faucet job. A Seattle gas tank water heater is $1,250–$3,550 installed, and a heat pump unit $2,150–$5,950; the unit you pick sets much of that spread.
Permits and inspections
Water heaters, gas lines, new pipe and remodel work usually need a city permit — typically $50–$300. A licensed plumber should pull it. Small repairs like a flapper or cartridge usually don't need one.
Where in Seattle you live
Downtown, SoDo & Capitol Hill runs highest because of parking, building rules and tight access. Outlying areas can add a trip charge of $75–$440.
- Wait for a weekday if you can.Shut the water off at the fixture or main and book a daytime visit. You'll pay $150/hr instead of $190–$450/hr or more after hours.
- Ask if the service call is credited.Many Seattle plumbers fold the $110–$400 call fee into the repair if you go ahead. Ask on the phone, before they drive out.
- Bundle small jobs into one visit.A running toilet, a dripping faucet and a slow drain on one visit costs one service call, not three.
- Get a flat price for defined jobs.For a clog, toilet, faucet or water heater, ask for a flat quote. Seattle small jobs run $140–$570 flat.
- Buy your own fixture — carefully.You can save on a faucet or toilet you pick yourself, but some plumbers won't warranty parts they didn't supply. Ask first.
- Get two quotes on big jobs.Water heaters ($1,250–$3,550), repipes ($6,200–$20,650) and remodel rough-ins vary the most. Two written quotes is the fastest way to spot a padded one.
Before you approve work in Seattle, get these in writing:
- The plumber's license number and the company's insurance
- The service call fee, and whether it's credited to the repair
- Hourly rate or flat price, and any minimum charge
- Parts and fixtures, with brand and model
- Who pulls the permit, and whether the fee is included
- Haul-away of the old water heater, toilet or fixture
- After-hours or weekend rates, if the job might run late
- Warranty on parts and on labor
How much does a plumber cost per hour in Seattle?
$110–$230 per hour for a licensed plumber on a weekday, and $150/hr is the going rate. Most companies add a $110–$400 service call; weeknights after hours run $190–$450/hr, and weekends and holidays more.
How much is a plumber service call in Seattle?
$110–$400, typical $220. Many plumbers credit it to the repair if you go ahead; after hours, the call-out fee rises to $220–$590.
What does it cost to unclog a drain in Seattle?
$140–$500 to snake a sink, tub or shower drain. A main line clog with a camera inspection and hydro-jetting is $540–$2,440.
How much does it cost to replace a water heater in Seattle?
$910–$2,850 for an electric tank and $1,250–$3,550 for a gas tank, installed. A heat pump water heater is $2,150–$5,950. A permit is usually required.
What does an emergency plumber cost in Seattle?
$370–$1,100 for the call-out and first hour at night, on a weekend or a holiday, then $190–$450/hr on weeknights and more on weekends and holidays. Repairs and parts are on top.
How much does toilet repair or replacement cost in Seattle?
A repair is $100–$500; a new fill valve or flapper is $100–$290. A new standard toilet, supplied and installed, is $450–$1,300.
What does it cost to fix a leaky faucet in Seattle?
$140–$570, or $140–$460 if it's just a cartridge or washer. Replacing the faucet with a standard one is $230–$850.
How much does it cost to repipe a house in Seattle?
$6,200–$20,650 for a 2-bath home with PEX. Wall patching is usually extra, and older homes with galvanized pipe are the most common candidates.
Do I need a licensed plumber and a permit in Seattle?
For water heaters, gas lines, new pipe and remodels, usually yes — the permit is typically $50–$300, and the plumber should pull it. Most states license plumbers or plumbing contractors, and some leave it to cities and counties — ask for the license number and check it with your state or city. Small repairs like a flapper or cartridge usually need no permit.
Is there a tax credit for a heat pump water heater in Seattle?
Not a federal one for new installs: the IRS 25C credit ended for equipment placed in service after December 31, 2025. Many utilities and states still offer rebates on a $2,150–$5,950 heat pump water heater — check your utility and state energy office.
Prices verified November 2026 · Cross-referenced against 50+ American pricing sources · See methodology
Prices for the Seattle metro area, November 2026. Outer suburbs may vary.
Get a fair plumber quote in Seattle
Local plumbers · Free quotes · No obligation, no spam.