How much does gas line installation cost in Fresno?
By Our research team · Last verified · Methodology
Most new gas lines to one appliance in Fresno cost $310–$1,550 installed by a licensed pro, with fittings, a shutoff valve and a pressure test. Most homeowners here pay about $670. Long runs and outdoor lines cost more.
How we get this data- Typical
- $670
- Low end
- $150
- High end
- $2,600
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local gas line plumbers send you a real quote. Free, no obligation.
Get my fair quote →The typical Fresno price is $670, 3% above the US typical of $650.
Fresno's price band
Fresno is pricier than 90% of the 195 US metros we price for gas line work.
A short new gas line to one appliance costs $310–$1,550 in Fresno, and $670 is typical. Hooking up a range to an existing line is $130–$460, a grill or fire pit line $410–$2,050, and a standby generator line $510–$3,100.
California law requires water heaters to be strapped for earthquakes, and automatic seismic gas shutoff valves are a common add-on. Los Angeles requires one when permitted work tops $10,000 or a home is sold; ask your building department what applies here.
Gas work needs a licensed plumber or gas fitter, and in most of the US a permit and a pressure test. Prices on this page include the pipe, fittings, a shutoff valve, labor and the test unless the row says otherwise. Budget $50–$360 for the permit in Fresno.
Comparing cities, or after the US-wide picture? See the national guide: Gas line installation cost in the USA.
$310–$1,550 for a short new gas line to one appliance in Fresno, installed — typically $670. Hooking up a range to an existing line is $130–$460, and a 50+ ft run $920–$4,100. Verified November 2026. Get free Fresno quotes →
- Short new gas line to one appliance: $310–$1,550 ($670 typical)
- Range hookup on an existing line $130–$460; dryer hookup $100–$360
- Grill or fire pit line $410–$2,050; standby generator line $510–$3,100
- Leak repair $150–$930; permit $50–$360; gas plumbers $75–$205/hr
- Priciest area to work in: Downtown & Tower District; lowest quotes: Clovis & the north
Prices verified November 2026 · Cross-referenced against 35+ American pricing sources · See methodology
Installed prices include pipe, fittings, labor and a pressure test unless the row says otherwise. Fresno metro, re-verified November 2026. Per-foot rows are for the pipe run only.
| Service | Low | Typical | High |
|---|---|---|---|
| New gas line to one appliance (short run)per line | $310per line | $670 | $1,550 |
| Gas plumber hourly rate/hr | $75/hr | $115 | $205 |
| Service call feeper visit | $75per visit | $150 | $280 |
| Gas range or cooktop hookup (existing line)per job | $130per job | $230 | $460 |
| Gas wall oven hookup (existing line)per job | $150per job | $280 | $620 |
| Gas dryer hookup (existing line)per job | $100per job | $180 | $360 |
| Water heater gas connection (gas side only)per job | $130per job | $260 | $510 |
| Gas stub-out or quick-connect outlet (e.g. for a grill)per outlet | $260per outlet | $410 | $820 |
| Outdoor grill or fire pit gas lineper line | $410per line | $920 | $2,050 |
| Standby generator gas lineper line | $510per line | $1,250 | $3,100 |
| Garage or shop heater gas lineper line | $360per line | $820 | $1,850 |
| New gas line run, 50+ ftper line | $920per line | $1,850 | $4,100 |
| Black iron gas pipe, installedper foot | $15per foot | $23 | $36 |
| CSST flexible gas pipe, installedper foot | $11per foot | $17 | $26 |
| Underground polyethylene gas line with trenchingper foot | $21per foot | $31 | $51 |
| Vented gas fireplace insert or wall heater, installedinstalled | $1,500installed | $3,050 | $5,600 |
| Gas leak detection and repairper job | $150per job | $410 | $930 |
| Gas pressure test and inspectionper job | $75per job | $150 | $410 |
| Gas shutoff valve replacementper valve | $150per valve | $310 | $670 |
| Seismic gas shutoff valve (California and quake zones)installed | $260installed | $510 | $1,000 |
| CSST bonding to the electrical groundper home | $100per home | $210 | $410 |
| Propane to natural gas conversion (2–3 appliances)per home | $720per home | $1,850 | $4,100 |
| Gas meter relocation (utility + plumber)per job | $1,000per job | $2,550 | $4,600 |
| Gas piping permitper job | $50per job | $150 | $360 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local gas line plumbers in Fresno
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need a price on?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the gas line plumbers who reply.
Where should they text you?
- Max 2 gas line plumbers. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched gas line plumbers see your number.
By continuing, you agree to our Terms and to up to 2 gas line plumbers contacting you by phone or text.
Check your phone
Prices verified November 2026 · Cross-referenced against 35+ American pricing sources · See methodology
Figures are for the Fresno metro area. Trip fees can apply on the far edges; tight older homes in Downtown & Tower District cost the most to work in.
Gas line prices across Fresno
Where you live in the metro changes the labor, not the pipe. Older homes in Downtown & Tower District take the longest; jobs in Clovis & the north tend to come in at or under the city typical.
Downtown & Tower District
- Per line
- $330–$1,750 per line
- Typical job
- $440–$2,300 / grill or fire pit line
Older buildings, finished walls and paid parking. Runs often go through plaster or between floors, and condo or co-op rules can limit work hours, so the same line takes longer here.
Southwest & Southeast Fresno
- Per line
- $320–$1,650 per line
- Typical job
- $420–$2,150 / grill or fire pit line
A mix of older houses and newer infill. Older homes may have undersized or tired steel piping that has to be extended or replaced before a new appliance goes on.
Central & Northeast Fresno
- Per line
- $310–$1,550 per line
- Typical job
- $410–$2,050 / grill or fire pit line
Mostly houses where the gas pipe is easy to reach under the floor or in the attic, so a new branch to an appliance is quick. Quotes cluster around the city typical.
Clovis & the north
- Per line
- $310–$1,650 per line
- Typical job
- $410–$2,150 / grill or fire pit line
Newer homes, often with CSST already in place, so adding a branch is quick. Yard lines to a grill or generator are the big-ticket jobs.
Real-World Gas Line Costs in Fresno
Here's what common gas line jobs cost in Fresno in 2026, installed by a licensed pro with fittings and a pressure test.
Range hookup to an existing gas valve — 1–2 hours
Disconnect the old range, fit a new flexible connector, check the shutoff valve, connect, leak-test and light the burners. If there's no gas valve behind the range, it becomes a new-line job at $440–$2,010 with the hookup.
New line to a gas dryer, 15–25 ft — 2–4 hours
A branch off the nearest gas pipe, a shutoff valve, a sediment trap, the hookup and a pressure test. Add $140–$620 if the dryer also needs a new vent to the outside.
Grill or fire pit line across the yard — half a day to a day
Usually buried polyethylene ($21–$51 a foot with trenching), metal risers at each end, a shutoff and a quick-connect at the grill. Concrete or pavers in the way add patching at $100–$410.
Standby generator line — half a day to a day
Generators burn a lot of gas, so the line is usually bigger than a normal branch, and the utility may need to upgrade the meter. Ask whether that fee is in the quote. The permit runs $50–$360.
Gas smell at the range — find and fix the leak
A loose fitting or old connector behind the appliance is the cheap end. A leak inside a wall costs more, and a buried leak with digging costs the most. A service call alone is $75–$280.
How much does gas line installation cost in Fresno?
$310–$1,550, with $670 typical. A 10-foot branch off an exposed pipe in a basement or garage is at the low end; a run through finished walls to a kitchen island sits near the top. Quotes above $1,550 usually mean a long run, an outdoor line or a bigger pipe.
If the gas pipe is already behind the appliance, you only need a hookup: $130–$460 for a range and $100–$360 for a dryer. Figures re-checked against 35 sources in November 2026.
Gas line prices in Fresno (2026): new lines, hookups and repairs
A short new line to one appliance costs $310–$1,550, a 50+ ft run $920–$4,100, and a standby generator line $510–$3,100.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| New gas line to one appliance (short run) | $310 | $670 | $1,550 |
| Gas range or cooktop hookup (existing line) | $130 | $230 | $460 |
| Gas dryer hookup (existing line) | $100 | $180 | $360 |
| Outdoor grill or fire pit gas line | $410 | $920 | $2,050 |
| Standby generator gas line | $510 | $1,250 | $3,100 |
| New gas line run, 50+ ft | $920 | $1,850 | $4,100 |
| Gas leak detection and repair | $150 | $410 | $930 |
| Gas meter relocation (utility + plumber) | $1,000 | $2,550 | $4,600 |
The pipe is the cheap part. On a typical $670 job in Fresno, most of the bill is a licensed plumber's time, fittings, the shutoff valve and the pressure test. That's why a 10-foot line and a 25-foot line are often priced close together.
What moves a gas line quote in Fresno:
- Distance — every extra foot of black iron adds about $23 installed; CSST about $17.
- Access — open basements and crawlspaces are quick; finished walls, slabs and attics take longer.
- Indoor vs outdoor — buried yard lines run $21–$51 a foot with trenching.
- Gas load — a generator or tankless heater can need bigger pipe and a utility meter check.
- Permit and test — $50–$360 for the permit; the pressure test should be in the price.
Ask every Fresno gas plumber for the same five things: the pipe type and length, what's included (valve, hookup, test, permit), any wall or yard patching, the labor warranty, and the start date. Compare those, not the headline price. Get a quote for your gas line work →
Gas Line Cost in Fresno by Number of Appliances
One appliance on a short run: $310–$1,550. Two or three appliances: $1,250–$3,100. Gas piping for a whole house with four or more appliances: $2,250–$7,700.
Worked example: a Fresno kitchen remodel that moves a gas range 12 feet and adds a gas dryer in the garage is two short runs in one visit. Expect about $900 for the new range line and hookup plus $180 for the dryer hookup on a shared branch, plus a $150 permit — about $1,230 all in, not two full jobs.
Adding a standby generator to that job brings in a bigger pipe and often a meter check: about $1,250 for the generator line on top. Doing it in the same visit saves a second service fee and a second permit.
Fresno Gas Line Costs by Pipe and Job Type
| Pipe or job type | Cost | Best for |
|---|---|---|
| Black iron pipe | $15–$36/ft installed | Indoor runs in basements and exposed spots, and the main trunk line. Rigid, very durable, more labor to cut and thread. |
| CSST flexible gas pipe | $11–$26/ft installed | Snaking through walls, floors and attics with few fittings. Must be bonded to the home's electrical ground. |
| Copper tubing (where allowed) | $11–$22/ft installed | Some areas and utilities allow it for gas; many don't. Ask your plumber and inspector before choosing it. |
| Underground polyethylene (PE) | $21–$51/ft installed | Buried yard lines to a grill, pool heater, generator or detached garage. Outdoor and underground only, with a tracer wire. |
| Short run to one appliance (10–30 ft) | $310–$1,550 per line | A new range, dryer, water heater or fireplace near existing gas pipe. |
| Long run, 50+ ft | $920–$4,100 per line | Across the house, up to an attic furnace or out to a detached garage. |
| Outdoor grill or fire pit line | $410–$2,050 per line | Patios and outdoor kitchens. Often a buried PE run with a riser and shutoff. |
| Standby generator line | $510–$3,100 per line | Whole-home backup power. Needs bigger pipe and sometimes a utility meter upgrade. |
| Flexible appliance connector | $100–$360 per hookup | The last few feet from the shutoff valve to a range, dryer or water heater, fitted as part of the hookup. |
Per-foot price vs what you actually pay — the Fresno gas line bill
Black iron costs $15–$36 a foot installed in Fresno, but short jobs don't price by the foot. Most plumbers charge a minimum that covers the trip, fittings, a shutoff valve and the pressure test, which is why a 10–30 ft line still lands at $310–$1,550.
Per-foot pricing matters on long runs. A 50+ ft line costs $920–$4,100, and a buried yard line $21–$51 a foot with trenching. On top of that, budget $50–$360 for the permit and any patching of walls or concrete.
What's included in a Fresno gas line quote (and what costs extra)
A standard installed price covers the new pipe and fittings, a licensed plumber's labor, a shutoff valve at the appliance, a sediment trap where needed, and a pressure and leak test before the gas goes on. The headline price often leaves out:
- Permit and inspection — $50–$360, required for new gas piping in most of the US
- The appliance hookup — $130–$460 for a range, if the quote only covers the line
- Wall, floor or yard patching — drywall repair can add up to $570; a small concrete patch $100–$410
- Meter or utility work — a meter move is $1,000–$4,600; some generator jobs need a utility meter upgrade
Ask whether the pressure test and the permit are in the price; a pro who skips either is cutting a corner that matters.
How far the line runs
Distance is the biggest driver after the minimum charge. A short run is $310–$1,550 in Fresno; a 50+ ft run $920–$4,100. Putting a new appliance close to existing gas pipe is the easiest saving.
Black iron or CSST
Black iron runs $15–$36 a foot installed and CSST flexible pipe $11–$26. CSST needs fewer fittings through walls but has to be bonded to the electrical ground ($100–$410 if it isn't already).
Access to the existing pipe
An open basement or crawlspace makes a new branch quick. Slab homes, finished ceilings and walls mean drilling, fishing pipe and patching afterward, which adds hours.
Local rules and conditions
Automatic seismic gas shutoff valves ($260–$1,000 installed) are a common add-on in California, and some cities require one with bigger remodels or a sale. Ask your building department, and use a valve on the state's approved list.
Permit and pressure test
New gas piping is pressure-tested before the gas goes on, and most cities inspect it. In Fresno budget $50–$360 for the permit; a separate test and inspection visit is $75–$410.
Gas load and pipe size
Every appliance adds to the gas the pipe has to carry. Adding a generator ($510–$3,100) or a tankless water heater can mean bigger pipe from the meter, and sometimes a utility meter upgrade.
Planned vs emergency
A booked job costs $310–$1,550 for a short run; a leak call starts with a $75–$280 service fee, and after-hours work costs more. If you smell gas, leave first and call the utility from outside.
- Bundle the jobs.One visit, one permit and one pressure test can cover a range, a dryer and a grill line. Each extra trip adds a service fee of $75–$280.
- Put appliances near existing pipe.Every foot counts on longer runs: about $23 a foot for black iron and $17 for CSST installed in Fresno.
- Ask about CSST for runs through finished walls.Flexible pipe needs fewer openings and fittings than threaded iron. Make sure the quote includes bonding to the electrical ground.
- Get an itemized quote.The permit ($50–$360), the pressure test and any patching should be on the quote, not a surprise on the invoice.
- Dig in the right season.Outdoor lines are cheapest when the ground is dry and unfrozen. Call 811 before anyone digs; it's free and marks buried utility lines.
- Get two quotes.Prices for the same short line in Fresno spread from $310 to $1,550. Two written quotes from licensed pros is the easiest way to land near $670.
Fresno gas plumbers often quote by phone. Before you pay a deposit, get these in writing:
- Pipe type and length, and the route it takes
- What the price includes: shutoff valve, sediment trap, hookup and connector
- Permit and inspection, and who pulls the permit
- Pressure test before the gas goes on
- Wall, ceiling or yard patching, and who does it
- CSST bonding to the electrical ground, if CSST is used
- For generators and big appliances: pipe size and whether the meter needs an upgrade
- Labor warranty, start date and payment terms
How much does it cost to run a gas line in Fresno?
$310–$1,550 for a short new line (about 10–30 ft) to one appliance, and $670 is typical. A 50+ ft run costs $920–$4,100.
How much does it cost to hook up a gas stove in Fresno?
$130–$460 if the gas valve is already behind the range. If you need a new line too, budget about $440–$2,010 for the line and the hookup together.
What does a gas dryer hookup cost in Fresno?
$100–$360 to connect a dryer to an existing gas valve. A new line to the laundry plus the hookup runs about $410–$1,910.
How much is a gas line to a grill or fire pit in Fresno?
$410–$2,050, usually a buried line with risers, a shutoff and a quick-connect. If gas pipe is already on the outside wall, a stub-out or quick-connect outlet is $260–$820.
What does a gas line for a standby generator cost in Fresno?
$510–$3,100 for the gas line alone. Generators need bigger pipe than most appliances, and some need a utility meter upgrade, so ask the gas company early.
How much does gas leak repair cost in Fresno?
$150–$930 to find and fix a typical leak, plus a service call of $75–$280 at many companies. Buried leaks that need digging cost more. If you smell gas, leave and call the gas utility or 911 from outside.
Do I need a permit for a gas line in Fresno?
In most cases, yes. New gas piping needs a licensed pro and usually a permit, a pressure test and an inspection. Budget $50–$360 for the permit; your plumber normally pulls it.
How much do gas plumbers charge per hour in Fresno?
$75–$205/hr, with about $115/hr typical. Many quote short jobs as a flat price instead, and some add a service call fee of $75–$280.
Is CSST or black iron cheaper in Fresno?
CSST usually costs less installed: $11–$26 a foot against $15–$36 for black iron, because it needs fewer fittings. CSST must be bonded to the home's electrical ground.
What's included in a Fresno gas line quote?
The pipe, fittings, a shutoff valve, labor and a pressure test. Often extra: the permit ($50–$360), the appliance hookup, and patching walls or concrete.
Prices verified November 2026 · Cross-referenced against 35+ American pricing sources · See methodology
Prices for the Fresno metro area, November 2026. Outer suburbs may vary.
Get a fair gas line quote in Fresno
Local gas line plumbers · Free quotes · No obligation, no spam.