How much does gas line installation cost in Spokane?
By Our research team · Last verified · Methodology
Most new gas lines to one appliance in Spokane cost $270–$1,350 for a short run of about 10–30 feet from existing pipe, installed and pressure-tested. $590 is the typical bill; hooking a range up to a line that's already there is $110–$410.
How we get this data- Typical
- $590
- Low end
- $140
- High end
- $2,250
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local gas line plumbers send you a real quote. Free, no obligation.
Get my fair quote →The typical Spokane price is $590, 9% below the US typical of $650.
Spokane's price band
Spokane is pricier than 57% of the 195 US metros we price for gas line work.
A short new gas line to one appliance costs $270–$1,350 in Spokane, and $590 is typical. Hooking up a range to an existing line is $110–$410, a grill or fire pit line $370–$1,850, and a standby generator line $460–$2,750.
Washington is earthquake country, so automatic seismic gas shutoff valves are a common add-on when a gas plumber is already on site.
Gas work needs a licensed plumber or gas fitter, and in most of the US a permit and a pressure test. Prices on this page include the pipe, fittings, a shutoff valve, labor and the test unless the row says otherwise. Budget $50–$330 for the permit in Spokane.
Comparing cities, or after the US-wide picture? See the national guide: Gas line installation cost in the USA.
$270–$1,350 for a short new gas line to one appliance in Spokane, installed — typically $590. Hooking up a range to an existing line is $110–$410, and a 50+ ft run $830–$3,650. Verified November 2026. Get free Spokane quotes →
- Short new gas line to one appliance: $270–$1,350 ($590 typical)
- Range hookup on an existing line $110–$410; dryer hookup $90–$320
- Grill or fire pit line $370–$1,850; standby generator line $460–$2,750
- Leak repair $140–$820; permit $50–$330; gas plumbers $70–$185/hr
- Priciest area to work in: Downtown, Browne's Addition & Garland; lowest quotes: South Hill & Gonzaga
Prices verified November 2026 · Cross-referenced against 35+ American pricing sources · See methodology
Installed prices include pipe, fittings, labor and a pressure test unless the row says otherwise. Spokane metro, re-verified November 2026. Per-foot rows are for the pipe run only.
| Service | Low | Typical | High |
|---|---|---|---|
| New gas line to one appliance (short run)per line | $270per line | $590 | $1,350 |
| Gas plumber hourly rate/hr | $70/hr | $100 | $185 |
| Service call feeper visit | $70per visit | $140 | $250 |
| Gas range or cooktop hookup (existing line)per job | $110per job | $210 | $410 |
| Gas wall oven hookup (existing line)per job | $140per job | $250 | $550 |
| Gas dryer hookup (existing line)per job | $90per job | $160 | $320 |
| Water heater gas connection (gas side only)per job | $110per job | $230 | $460 |
| Gas stub-out or quick-connect outlet (e.g. for a grill)per outlet | $230per outlet | $370 | $730 |
| Outdoor grill or fire pit gas lineper line | $370per line | $830 | $1,850 |
| Standby generator gas lineper line | $460per line | $1,100 | $2,750 |
| Garage or shop heater gas lineper line | $320per line | $730 | $1,650 |
| New gas line run, 50+ ftper line | $830per line | $1,650 | $3,650 |
| Black iron gas pipe, installedper foot | $14per foot | $20 | $32 |
| CSST flexible gas pipe, installedper foot | $10per foot | $16 | $23 |
| Underground polyethylene gas line with trenchingper foot | $18per foot | $28 | $46 |
| Vented gas fireplace insert or wall heater, installedinstalled | $1,450installed | $2,850 | $5,250 |
| Gas leak detection and repairper job | $140per job | $360 | $820 |
| Gas pressure test and inspectionper job | $70per job | $140 | $370 |
| Gas shutoff valve replacementper valve | $140per valve | $280 | $600 |
| Seismic gas shutoff valve (California and quake zones)installed | $230installed | $460 | $930 |
| CSST bonding to the electrical groundper home | $90per home | $180 | $370 |
| Propane to natural gas conversion (2–3 appliances)per home | $650per home | $1,650 | $3,700 |
| Gas meter relocation (utility + plumber)per job | $930per job | $2,300 | $4,150 |
| Gas piping permitper job | $50per job | $140 | $330 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local gas line plumbers in Spokane
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need a price on?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the gas line plumbers who reply.
Where should they text you?
- Max 2 gas line plumbers. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched gas line plumbers see your number.
By continuing, you agree to our Terms and to up to 2 gas line plumbers contacting you by phone or text.
Check your phone
Prices verified November 2026 · Cross-referenced against 35+ American pricing sources · See methodology
Prices cover the Spokane metro. Outlying towns can run 5–10% lower; older buildings in Downtown, Browne's Addition & Garland sit at the top of each range.
Gas line prices across Spokane
Where you live in the metro changes the labor, not the pipe. Older homes in Downtown, Browne's Addition & Garland take the longest; jobs in South Hill & Gonzaga tend to come in at or under the city typical.
Downtown, Browne's Addition & Garland
- Per line
- $290–$1,500 per line
- Typical job
- $400–$2,050 / grill or fire pit line
Condos, older houses and mixed-use buildings. New runs often need wall or ceiling openings, and old piping near the meter may need a section replaced to pass the pressure test.
East Central & Hillyard
- Per line
- $280–$1,450 per line
- Typical job
- $380–$1,950 / grill or fire pit line
Renovated older homes next to new builds. A kitchen remodel that moves the range is the most common job here, and it's usually a short CSST or black iron run.
South Hill & Gonzaga
- Per line
- $260–$1,300 per line
- Typical job
- $350–$1,800 / grill or fire pit line
Student rentals and small houses. Simple hookups and short runs keep most quotes at or a little below the city typical.
Spokane Valley & Coeur d'Alene ID
- Per line
- $270–$1,400 per line
- Typical job
- $370–$1,950 / grill or fire pit line
Bigger homes and longer runs. Outdoor kitchens, fire pits, pool heaters and standby generators are common here, and those lines run longer and bigger.
Real-World Gas Line Costs in Spokane
Here's what common gas line jobs cost in Spokane in 2026, installed by a licensed pro with fittings and a pressure test.
Range hookup to an existing gas valve — 1–2 hours
Disconnect the old range, fit a new flexible connector, check the shutoff valve, connect, leak-test and light the burners. If there's no gas valve behind the range, it becomes a new-line job at $380–$1,760 with the hookup.
New line to a gas dryer, 15–25 ft — 2–4 hours
A branch off the nearest gas pipe, a shutoff valve, a sediment trap, the hookup and a pressure test. Add $130–$550 if the dryer also needs a new vent to the outside.
Grill or fire pit line across the yard — half a day to a day
Usually buried polyethylene ($18–$46 a foot with trenching), metal risers at each end, a shutoff and a quick-connect at the grill. Concrete or pavers in the way add patching at $90–$370.
Standby generator line — half a day to a day
Generators burn a lot of gas, so the line is usually bigger than a normal branch, and the utility may need to upgrade the meter. Ask whether that fee is in the quote. The permit runs $50–$330.
Gas smell at the range — find and fix the leak
A loose fitting or old connector behind the appliance is the cheap end. A leak inside a wall costs more, and a buried leak with digging costs the most. A service call alone is $70–$250.
How much does gas line installation cost in Spokane?
A short gas line in Spokane costs $270 to $1,350. The middle of the market, about $590, buys roughly 10–30 feet of new pipe, a shutoff valve, the hookup fittings and a pressure test by a licensed pro. Access, distance and pipe type push quotes up or down.
Leaks are priced differently: finding and fixing one runs $140–$820, more if the pipe is buried. Re-checked against 35 sources in November 2026.
Gas line prices in Spokane (2026): new lines, hookups and repairs
A short new line to one appliance costs $270–$1,350, a 50+ ft run $830–$3,650, and a standby generator line $460–$2,750.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| New gas line to one appliance (short run) | $270 | $590 | $1,350 |
| Gas range or cooktop hookup (existing line) | $110 | $210 | $410 |
| Gas dryer hookup (existing line) | $90 | $160 | $320 |
| Outdoor grill or fire pit gas line | $370 | $830 | $1,850 |
| Standby generator gas line | $460 | $1,100 | $2,750 |
| New gas line run, 50+ ft | $830 | $1,650 | $3,650 |
| Gas leak detection and repair | $140 | $360 | $820 |
| Gas meter relocation (utility + plumber) | $930 | $2,300 | $4,150 |
The pipe is the cheap part. On a typical $590 job in Spokane, most of the bill is a licensed plumber's time, fittings, the shutoff valve and the pressure test. That's why a 10-foot line and a 25-foot line are often priced close together.
What moves a gas line quote in Spokane:
- Distance — every extra foot of black iron adds about $20 installed; CSST about $16.
- Access — open basements and crawlspaces are quick; finished walls, slabs and attics take longer.
- Indoor vs outdoor — buried yard lines run $18–$46 a foot with trenching.
- Gas load — a generator or tankless heater can need bigger pipe and a utility meter check.
- Permit and test — $50–$330 for the permit; the pressure test should be in the price.
Ask every Spokane gas plumber for the same five things: the pipe type and length, what's included (valve, hookup, test, permit), any wall or yard patching, the labor warranty, and the start date. Compare those, not the headline price. Get a quote for your gas line work →
Gas Line Cost in Spokane by Number of Appliances
One appliance on a short run: $270–$1,350. Two or three appliances: $1,100–$2,750. Gas piping for a whole house with four or more appliances: $2,000–$6,900.
Worked example: a Spokane kitchen remodel that moves a gas range 12 feet and adds a gas dryer in the garage is two short runs in one visit. Expect about $800 for the new range line and hookup plus $160 for the dryer hookup on a shared branch, plus a $140 permit — about $1,100 all in, not two full jobs.
Adding a standby generator to that job brings in a bigger pipe and often a meter check: about $1,100 for the generator line on top. Doing it in the same visit saves a second service fee and a second permit.
Spokane Gas Line Costs by Pipe and Job Type
| Pipe or job type | Cost | Best for |
|---|---|---|
| Black iron pipe | $14–$32/ft installed | Indoor runs in basements and exposed spots, and the main trunk line. Rigid, very durable, more labor to cut and thread. |
| CSST flexible gas pipe | $10–$23/ft installed | Snaking through walls, floors and attics with few fittings. Must be bonded to the home's electrical ground. |
| Copper tubing (where allowed) | $10–$19/ft installed | Some areas and utilities allow it for gas; many don't. Ask your plumber and inspector before choosing it. |
| Underground polyethylene (PE) | $18–$46/ft installed | Buried yard lines to a grill, pool heater, generator or detached garage. Outdoor and underground only, with a tracer wire. |
| Short run to one appliance (10–30 ft) | $270–$1,350 per line | A new range, dryer, water heater or fireplace near existing gas pipe. |
| Long run, 50+ ft | $830–$3,650 per line | Across the house, up to an attic furnace or out to a detached garage. |
| Outdoor grill or fire pit line | $370–$1,850 per line | Patios and outdoor kitchens. Often a buried PE run with a riser and shutoff. |
| Standby generator line | $460–$2,750 per line | Whole-home backup power. Needs bigger pipe and sometimes a utility meter upgrade. |
| Flexible appliance connector | $90–$320 per hookup | The last few feet from the shutoff valve to a range, dryer or water heater, fitted as part of the hookup. |
Per-foot price vs what you actually pay — the Spokane gas line bill
Black iron costs $14–$32 a foot installed in Spokane, but short jobs don't price by the foot. Most plumbers charge a minimum that covers the trip, fittings, a shutoff valve and the pressure test, which is why a 10–30 ft line still lands at $270–$1,350.
Per-foot pricing matters on long runs. A 50+ ft line costs $830–$3,650, and a buried yard line $18–$46 a foot with trenching. On top of that, budget $50–$330 for the permit and any patching of walls or concrete.
What's included in a Spokane gas line quote (and what costs extra)
A standard installed price covers the new pipe and fittings, a licensed plumber's labor, a shutoff valve at the appliance, a sediment trap where needed, and a pressure and leak test before the gas goes on. The headline price often leaves out:
- Permit and inspection — $50–$330, required for new gas piping in most of the US
- The appliance hookup — $110–$410 for a range, if the quote only covers the line
- Wall, floor or yard patching — drywall repair can add up to $500; a small concrete patch $90–$370
- Meter or utility work — a meter move is $930–$4,150; some generator jobs need a utility meter upgrade
Ask whether the pressure test and the permit are in the price; a pro who skips either is cutting a corner that matters.
How far the line runs
Distance is the biggest driver after the minimum charge. A short run is $270–$1,350 in Spokane; a 50+ ft run $830–$3,650. Putting a new appliance close to existing gas pipe is the easiest saving.
Black iron or CSST
Black iron runs $14–$32 a foot installed and CSST flexible pipe $10–$23. CSST needs fewer fittings through walls but has to be bonded to the electrical ground ($90–$370 if it isn't already).
Basements, crawlspaces and finished walls
An open basement or crawlspace makes a new branch quick. Slab homes, finished ceilings and walls mean drilling, fishing pipe and patching afterward, which adds hours.
Local rules and conditions
Washington is earthquake country, so many homeowners add an automatic seismic gas shutoff valve ($230–$930 installed) while a gas plumber is on site. It shuts the gas off at the meter in a strong quake.
Permit and pressure test
New gas piping is pressure-tested before the gas goes on, and most cities inspect it. In Spokane budget $50–$330 for the permit; a separate test and inspection visit is $70–$370.
Gas load and pipe size
Every appliance adds to the gas the pipe has to carry. Adding a generator ($460–$2,750) or a tankless water heater can mean bigger pipe from the meter, and sometimes a utility meter upgrade.
Planned vs emergency
A booked job costs $270–$1,350 for a short run; a leak call starts with a $70–$250 service fee, and after-hours work costs more. If you smell gas, leave first and call the utility from outside.
- Bundle the jobs.One visit, one permit and one pressure test can cover a range, a dryer and a grill line. Each extra trip adds a service fee of $70–$250.
- Put appliances near existing pipe.Every foot counts on longer runs: about $20 a foot for black iron and $16 for CSST installed in Spokane.
- Ask about CSST for runs through finished walls.Flexible pipe needs fewer openings and fittings than threaded iron. Make sure the quote includes bonding to the electrical ground.
- Get an itemized quote.The permit ($50–$330), the pressure test and any patching should be on the quote, not a surprise on the invoice.
- Dig in the right season.Outdoor lines are cheapest when the ground is dry and unfrozen. Call 811 before anyone digs; it's free and marks buried utility lines.
- Get two quotes.Prices for the same short line in Spokane spread from $270 to $1,350. Two written quotes from licensed pros is the easiest way to land near $590.
Spokane gas plumbers often quote by phone. Before you pay a deposit, get these in writing:
- Pipe type and length, and the route it takes
- What the price includes: shutoff valve, sediment trap, hookup and connector
- Permit and inspection, and who pulls the permit
- Pressure test before the gas goes on
- Wall, ceiling or yard patching, and who does it
- CSST bonding to the electrical ground, if CSST is used
- For generators and big appliances: pipe size and whether the meter needs an upgrade
- Labor warranty, start date and payment terms
How much does it cost to run a gas line in Spokane?
$270–$1,350 for a short new line (about 10–30 ft) to one appliance, and $590 is typical. A 50+ ft run costs $830–$3,650.
How much does it cost to hook up a gas stove in Spokane?
$110–$410 if the gas valve is already behind the range. If you need a new line too, budget about $380–$1,760 for the line and the hookup together.
What does a gas dryer hookup cost in Spokane?
$90–$320 to connect a dryer to an existing gas valve. A new line to the laundry plus the hookup runs about $360–$1,670.
How much is a gas line to a grill or fire pit in Spokane?
$370–$1,850, usually a buried line with risers, a shutoff and a quick-connect. If gas pipe is already on the outside wall, a stub-out or quick-connect outlet is $230–$730.
What does a gas line for a standby generator cost in Spokane?
$460–$2,750 for the gas line alone. Generators need bigger pipe than most appliances, and some need a utility meter upgrade, so ask the gas company early.
How much does gas leak repair cost in Spokane?
$140–$820 to find and fix a typical leak, plus a service call of $70–$250 at many companies. Buried leaks that need digging cost more. If you smell gas, leave and call the gas utility or 911 from outside.
Do I need a permit for a gas line in Spokane?
In most cases, yes. New gas piping needs a licensed pro and usually a permit, a pressure test and an inspection. Budget $50–$330 for the permit; your plumber normally pulls it.
How much do gas plumbers charge per hour in Spokane?
$70–$185/hr, with about $100/hr typical. Many quote short jobs as a flat price instead, and some add a service call fee of $70–$250.
Is CSST or black iron cheaper in Spokane?
CSST usually costs less installed: $10–$23 a foot against $14–$32 for black iron, because it needs fewer fittings. CSST must be bonded to the home's electrical ground.
What's included in a Spokane gas line quote?
The pipe, fittings, a shutoff valve, labor and a pressure test. Often extra: the permit ($50–$330), the appliance hookup, and patching walls or concrete.
Prices verified November 2026 · Cross-referenced against 35+ American pricing sources · See methodology
Prices for the Spokane metro area, November 2026. Outer suburbs may vary.
Get a fair gas line quote in Spokane
Local gas line plumbers · Free quotes · No obligation, no spam.