How much does gas line installation cost in Columbia?
By Our research team · Last verified · Methodology
Most new gas lines to one appliance in Columbia cost $280–$1,400 installed by a licensed pro, with fittings, a shutoff valve and a pressure test. Most homeowners here pay about $610. Long runs and outdoor lines cost more.
How we get this data- Typical
- $610
- Low end
- $140
- High end
- $2,350
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local gas line plumbers send you a real quote. Free, no obligation.
Get my fair quote →The typical Columbia price is $610, 6% below the US typical of $650.
Columbia's price band
Columbia is pricier than 59% of the 195 US metros we price for gas line work.
A short new gas line to one appliance costs $280–$1,400 in Columbia, and $610 is typical. Hooking up a range to an existing line is $120–$420, a grill or fire pit line $380–$1,900, and a standby generator line $470–$2,850.
Columbia is a mid-size market. The typical short gas line here is about 6% below the US typical of $650, and most of the spread is labor, access and how far the line has to travel, not the pipe itself.
Gas work needs a licensed plumber or gas fitter, and in most of the US a permit and a pressure test. Prices on this page include the pipe, fittings, a shutoff valve, labor and the test unless the row says otherwise. Budget $50–$340 for the permit in Columbia.
Comparing cities, or after the US-wide picture? See the national guide: Gas line installation cost in the USA.
$280–$1,400 for a short new gas line to one appliance in Columbia, installed — typically $610. Hooking up a range to an existing line is $120–$420, and a 50+ ft run $850–$3,800. Verified November 2026. Get free Columbia quotes →
- Short new gas line to one appliance: $280–$1,400 ($610 typical)
- Range hookup on an existing line $120–$420; dryer hookup $95–$330
- Grill or fire pit line $380–$1,900; standby generator line $470–$2,850
- Leak repair $140–$840; permit $50–$340; gas plumbers $70–$190/hr
- Priciest area to work in: Downtown, Vista & Main Street; lowest quotes: USC & Rosewood
Prices verified November 2026 · Cross-referenced against 35+ American pricing sources · See methodology
Installed prices include pipe, fittings, labor and a pressure test unless the row says otherwise. Columbia metro, re-verified November 2026. Per-foot rows are for the pipe run only.
| Service | Low | Typical | High |
|---|---|---|---|
| New gas line to one appliance (short run)per line | $280per line | $610 | $1,400 |
| Gas plumber hourly rate/hr | $70/hr | $105 | $190 |
| Service call feeper visit | $70per visit | $140 | $260 |
| Gas range or cooktop hookup (existing line)per job | $120per job | $210 | $420 |
| Gas wall oven hookup (existing line)per job | $140per job | $260 | $560 |
| Gas dryer hookup (existing line)per job | $95per job | $160 | $330 |
| Water heater gas connection (gas side only)per job | $120per job | $240 | $470 |
| Gas stub-out or quick-connect outlet (e.g. for a grill)per outlet | $240per outlet | $380 | $760 |
| Outdoor grill or fire pit gas lineper line | $380per line | $850 | $1,900 |
| Standby generator gas lineper line | $470per line | $1,150 | $2,850 |
| Garage or shop heater gas lineper line | $330per line | $760 | $1,700 |
| New gas line run, 50+ ftper line | $850per line | $1,700 | $3,800 |
| Black iron gas pipe, installedper foot | $14per foot | $21 | $33 |
| CSST flexible gas pipe, installedper foot | $10per foot | $16 | $24 |
| Underground polyethylene gas line with trenchingper foot | $19per foot | $28 | $47 |
| Vented gas fireplace insert or wall heater, installedinstalled | $1,450installed | $2,900 | $5,350 |
| Gas leak detection and repairper job | $140per job | $380 | $840 |
| Gas pressure test and inspectionper job | $70per job | $140 | $380 |
| Gas shutoff valve replacementper valve | $140per valve | $280 | $610 |
| Seismic gas shutoff valve (California and quake zones)installed | $240installed | $480 | $950 |
| CSST bonding to the electrical groundper home | $95per home | $190 | $380 |
| Propane to natural gas conversion (2–3 appliances)per home | $660per home | $1,700 | $3,800 |
| Gas meter relocation (utility + plumber)per job | $950per job | $2,400 | $4,300 |
| Gas piping permitper job | $50per job | $150 | $340 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local gas line plumbers in Columbia
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need a price on?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the gas line plumbers who reply.
Where should they text you?
- Max 2 gas line plumbers. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched gas line plumbers see your number.
By continuing, you agree to our Terms and to up to 2 gas line plumbers contacting you by phone or text.
Check your phone
Prices verified November 2026 · Cross-referenced against 35+ American pricing sources · See methodology
Prices cover the Columbia metro. Outlying towns can run 5–10% lower; older buildings in Downtown, Vista & Main Street sit at the top of each range.
Gas line prices across Columbia
Same pipe, four price bands. Access, parking and old piping push Downtown, Vista & Main Street to the top; USC & Rosewood sits at or below the city typical.
Downtown, Vista & Main Street
- Per line
- $300–$1,550 per line
- Typical job
- $410–$2,150 / grill or fire pit line
Condos, older houses and mixed-use buildings. New runs often need wall or ceiling openings, and old piping near the meter may need a section replaced to pass the pressure test.
North Columbia & Eau Claire
- Per line
- $290–$1,500 per line
- Typical job
- $390–$2,000 / grill or fire pit line
Older homes being updated. Plumbers here often find a line too small for a new range plus a tankless heater, which is where the quote climbs.
USC & Rosewood
- Per line
- $270–$1,350 per line
- Typical job
- $360–$1,850 / grill or fire pit line
Rentals and older houses. Landlord jobs tend to be quick appliance hookups and short lines, which keeps prices a little under the city average.
Lexington, Irmo & the suburbs
- Per line
- $280–$1,450 per line
- Typical job
- $380–$2,000 / grill or fire pit line
Bigger homes and longer runs. Outdoor kitchens, fire pits, pool heaters and standby generators are common here, and those lines run longer and bigger.
Real-World Gas Line Costs in Columbia
Here's what common gas line jobs cost in Columbia in 2026, installed by a licensed pro with fittings and a pressure test.
Range hookup to an existing gas valve — 1–2 hours
Disconnect the old range, fit a new flexible connector, check the shutoff valve, connect, leak-test and light the burners. If there's no gas valve behind the range, it becomes a new-line job at $400–$1,820 with the hookup.
New line to a gas dryer, 15–25 ft — 2–4 hours
A branch off the nearest gas pipe, a shutoff valve, a sediment trap, the hookup and a pressure test. Add $130–$570 if the dryer also needs a new vent to the outside.
Grill or fire pit line across the yard — half a day to a day
Usually buried polyethylene ($19–$47 a foot with trenching), metal risers at each end, a shutoff and a quick-connect at the grill. Concrete or pavers in the way add patching at $95–$380.
Standby generator line — half a day to a day
Generators burn a lot of gas, so the line is usually bigger than a normal branch, and the utility may need to upgrade the meter. Ask whether that fee is in the quote. The permit runs $50–$340.
Gas smell at the range — find and fix the leak
A loose fitting or old connector behind the appliance is the cheap end. A leak inside a wall costs more, and a buried leak with digging costs the most. A service call alone is $70–$260.
How much does gas line installation cost in Columbia?
$280–$1,400, with $610 typical. A 10-foot branch off an exposed pipe in a basement or garage is at the low end; a run through finished walls to a kitchen island sits near the top. Quotes above $1,400 usually mean a long run, an outdoor line or a bigger pipe.
Bigger jobs cost more. A 50+ ft run is $850–$3,800, a grill or fire pit line $380–$1,900, and a standby generator line $470–$2,850. Prices re-checked against 35 sources in November 2026.
Gas line prices in Columbia (2026): new lines, hookups and repairs
A short new line to one appliance costs $280–$1,400, a 50+ ft run $850–$3,800, and a standby generator line $470–$2,850.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| New gas line to one appliance (short run) | $280 | $610 | $1,400 |
| Gas range or cooktop hookup (existing line) | $120 | $210 | $420 |
| Gas dryer hookup (existing line) | $95 | $160 | $330 |
| Outdoor grill or fire pit gas line | $380 | $850 | $1,900 |
| Standby generator gas line | $470 | $1,150 | $2,850 |
| New gas line run, 50+ ft | $850 | $1,700 | $3,800 |
| Gas leak detection and repair | $140 | $380 | $840 |
| Gas meter relocation (utility + plumber) | $950 | $2,400 | $4,300 |
Black iron vs CSST in Columbia: iron runs $14–$33 a foot installed and CSST $10–$24. CSST is cheaper to snake through finished walls; iron is tougher where pipe is exposed. Many jobs use both.
What moves a gas line quote in Columbia:
- Distance — every extra foot of black iron adds about $21 installed; CSST about $16.
- Access — open basements and crawlspaces are quick; finished walls, slabs and attics take longer.
- Indoor vs outdoor — buried yard lines run $19–$47 a foot with trenching.
- Gas load — a generator or tankless heater can need bigger pipe and a utility meter check.
- Permit and test — $50–$340 for the permit; the pressure test should be in the price.
Ask every Columbia gas plumber for the same five things: the pipe type and length, what's included (valve, hookup, test, permit), any wall or yard patching, the labor warranty, and the start date. Compare those, not the headline price. Get a quote for your gas line work →
Gas Line Cost in Columbia by Number of Appliances
One appliance on a short run: $280–$1,400. Two or three appliances: $1,150–$2,850. Gas piping for a whole house with four or more appliances: $2,100–$7,100.
Worked example: a Columbia kitchen remodel that moves a gas range 12 feet and adds a gas dryer in the garage is two short runs in one visit. Expect about $820 for the new range line and hookup plus $160 for the dryer hookup on a shared branch, plus a $150 permit — about $1,130 all in, not two full jobs.
Adding a standby generator to that job brings in a bigger pipe and often a meter check: about $1,150 for the generator line on top. Doing it in the same visit saves a second service fee and a second permit.
Columbia Gas Line Costs by Pipe and Job Type
| Pipe or job type | Cost | Best for |
|---|---|---|
| Black iron pipe | $14–$33/ft installed | Indoor runs in basements and exposed spots, and the main trunk line. Rigid, very durable, more labor to cut and thread. |
| CSST flexible gas pipe | $10–$24/ft installed | Snaking through walls, floors and attics with few fittings. Must be bonded to the home's electrical ground. |
| Copper tubing (where allowed) | $10–$20/ft installed | Some areas and utilities allow it for gas; many don't. Ask your plumber and inspector before choosing it. |
| Underground polyethylene (PE) | $19–$47/ft installed | Buried yard lines to a grill, pool heater, generator or detached garage. Outdoor and underground only, with a tracer wire. |
| Short run to one appliance (10–30 ft) | $280–$1,400 per line | A new range, dryer, water heater or fireplace near existing gas pipe. |
| Long run, 50+ ft | $850–$3,800 per line | Across the house, up to an attic furnace or out to a detached garage. |
| Outdoor grill or fire pit line | $380–$1,900 per line | Patios and outdoor kitchens. Often a buried PE run with a riser and shutoff. |
| Standby generator line | $470–$2,850 per line | Whole-home backup power. Needs bigger pipe and sometimes a utility meter upgrade. |
| Flexible appliance connector | $95–$330 per hookup | The last few feet from the shutoff valve to a range, dryer or water heater, fitted as part of the hookup. |
Per-foot price vs what you actually pay — the Columbia gas line bill
Black iron costs $14–$33 a foot installed in Columbia, but short jobs don't price by the foot. Most plumbers charge a minimum that covers the trip, fittings, a shutoff valve and the pressure test, which is why a 10–30 ft line still lands at $280–$1,400.
Per-foot pricing matters on long runs. A 50+ ft line costs $850–$3,800, and a buried yard line $19–$47 a foot with trenching. On top of that, budget $50–$340 for the permit and any patching of walls or concrete.
What's included in a Columbia gas line quote (and what costs extra)
A standard installed price covers the new pipe and fittings, a licensed plumber's labor, a shutoff valve at the appliance, a sediment trap where needed, and a pressure and leak test before the gas goes on. The headline price often leaves out:
- Permit and inspection — $50–$340, required for new gas piping in most of the US
- The appliance hookup — $120–$420 for a range, if the quote only covers the line
- Wall, floor or yard patching — drywall repair can add up to $520; a small concrete patch $95–$380
- Meter or utility work — a meter move is $950–$4,300; some generator jobs need a utility meter upgrade
Ask whether the pressure test and the permit are in the price; a pro who skips either is cutting a corner that matters.
How far the line runs
Distance is the biggest driver after the minimum charge. A short run is $280–$1,400 in Columbia; a 50+ ft run $850–$3,800. Putting a new appliance close to existing gas pipe is the easiest saving.
Black iron or CSST
Black iron runs $14–$33 a foot installed and CSST flexible pipe $10–$24. CSST needs fewer fittings through walls but has to be bonded to the electrical ground ($95–$380 if it isn't already).
Access to the existing pipe
An open basement or crawlspace makes a new branch quick. Slab homes, finished ceilings and walls mean drilling, fishing pipe and patching afterward, which adds hours.
Local rules and conditions
Storm outages make standby generators popular in South Carolina. A generator line costs $470–$2,850, and the gas utility may need to upgrade the meter for the extra load.
Permit and pressure test
New gas piping is pressure-tested before the gas goes on, and most cities inspect it. In Columbia budget $50–$340 for the permit; a separate test and inspection visit is $70–$380.
Gas load and pipe size
Every appliance adds to the gas the pipe has to carry. Adding a generator ($470–$2,850) or a tankless water heater can mean bigger pipe from the meter, and sometimes a utility meter upgrade.
Planned vs emergency
A booked job costs $280–$1,400 for a short run; a leak call starts with a $70–$260 service fee, and after-hours work costs more. If you smell gas, leave first and call the utility from outside.
- Bundle the jobs.One visit, one permit and one pressure test can cover a range, a dryer and a grill line. Each extra trip adds a service fee of $70–$260.
- Put appliances near existing pipe.Every foot counts on longer runs: about $21 a foot for black iron and $16 for CSST installed in Columbia.
- Ask about CSST for runs through finished walls.Flexible pipe needs fewer openings and fittings than threaded iron. Make sure the quote includes bonding to the electrical ground.
- Get an itemized quote.The permit ($50–$340), the pressure test and any patching should be on the quote, not a surprise on the invoice.
- Dig in the right season.Outdoor lines are cheapest when the ground is dry and unfrozen. Call 811 before anyone digs; it's free and marks buried utility lines.
- Get two quotes.Prices for the same short line in Columbia spread from $280 to $1,400. Two written quotes from licensed pros is the easiest way to land near $610.
Columbia gas plumbers often quote by phone. Before you pay a deposit, get these in writing:
- Pipe type and length, and the route it takes
- What the price includes: shutoff valve, sediment trap, hookup and connector
- Permit and inspection, and who pulls the permit
- Pressure test before the gas goes on
- Wall, ceiling or yard patching, and who does it
- CSST bonding to the electrical ground, if CSST is used
- For generators and big appliances: pipe size and whether the meter needs an upgrade
- Labor warranty, start date and payment terms
How much does it cost to run a gas line in Columbia?
$280–$1,400 for a short new line (about 10–30 ft) to one appliance, and $610 is typical. A 50+ ft run costs $850–$3,800.
How much does it cost to hook up a gas stove in Columbia?
$120–$420 if the gas valve is already behind the range. If you need a new line too, budget about $400–$1,820 for the line and the hookup together.
What does a gas dryer hookup cost in Columbia?
$95–$330 to connect a dryer to an existing gas valve. A new line to the laundry plus the hookup runs about $375–$1,730.
How much is a gas line to a grill or fire pit in Columbia?
$380–$1,900, usually a buried line with risers, a shutoff and a quick-connect. If gas pipe is already on the outside wall, a stub-out or quick-connect outlet is $240–$760.
What does a gas line for a standby generator cost in Columbia?
$470–$2,850 for the gas line alone. Generators need bigger pipe than most appliances, and some need a utility meter upgrade, so ask the gas company early.
How much does gas leak repair cost in Columbia?
$140–$840 to find and fix a typical leak, plus a service call of $70–$260 at many companies. Buried leaks that need digging cost more. If you smell gas, leave and call the gas utility or 911 from outside.
Do I need a permit for a gas line in Columbia?
In most cases, yes. New gas piping needs a licensed pro and usually a permit, a pressure test and an inspection. Budget $50–$340 for the permit; your plumber normally pulls it.
How much do gas plumbers charge per hour in Columbia?
$70–$190/hr, with about $105/hr typical. Many quote short jobs as a flat price instead, and some add a service call fee of $70–$260.
Is CSST or black iron cheaper in Columbia?
CSST usually costs less installed: $10–$24 a foot against $14–$33 for black iron, because it needs fewer fittings. CSST must be bonded to the home's electrical ground.
What's included in a Columbia gas line quote?
The pipe, fittings, a shutoff valve, labor and a pressure test. Often extra: the permit ($50–$340), the appliance hookup, and patching walls or concrete.
Prices verified November 2026 · Cross-referenced against 35+ American pricing sources · See methodology
Prices for the Columbia metro area, November 2026. Outer suburbs may vary.
Get a fair gas line quote in Columbia
Local gas line plumbers · Free quotes · No obligation, no spam.