How much does a carpenter cost in Durham?
By Our research team · Last verified · Methodology
Most carpenters in Durham charge $40–$110/hr with $65/hr the going rate. A day rate runs $320–$880, hanging a pre-hung door $140–$495, and baseboard $4–$11 a foot installed.
How we get this data- Typical
- $65/hr
- Low end
- $25/hr
- High end
- $175/hr
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local carpenters send you a real quote. Free, no obligation.
Get my fair quote →The typical Durham price is $65/hr, 13% below the US typical of $75/hr.
Durham's price band
Durham is cheaper than 59% of the 195 US metros we price for carpenter work.
Carpenter rates in Durham run $40–$110 an hour, typically $65/hr, with most charging a $95–$355 minimum for a short visit. For single jobs, budget $95–$360 to fix a sticking door, $700–$1,625 to trim out a 12 × 12 bedroom and $2,400–$7,500 for a 10 × 12 wood pergola.
Durham is a mid-size market. A carpenter's hourly rate is pay plus the truck, tools, insurance and the hours nobody bills for, so it tracks local wages: carpenters in the Durham-Chapel Hill metro earn a median $51,540 a year, about 15% below the US median, and rates here run about 13% below the national typical of $75/hr.
Check your state contractor board for the dollar line above which a carpenter must hold a contractor license or registration, and ask your city building department whether the job needs a permit — framing, decks, stairs and structural repair usually do; trim, doors and closets usually do not. This is general information, not legal advice.
Comparing cities, or after the US-wide picture? See the national guide: Carpenter cost in the USA.
$40–$110/hr for a carpenter in Durham — typically $65/hr, or $320–$880 for a full day. Hanging a pre-hung door is $140–$495, baseboard $4–$11 a foot installed, and a reach-in closet build-out $870–$3,600. Verified November 2026. Get free Durham quotes →
- Carpenter: $40–$110/hr ($65/hr typical); day rate $320–$880
- Finish carpenter $55–$140/hr; framer $35–$80/hr; minimum $95–$355
- Baseboard $4–$11/ft; crown molding $7–$15/ft installed
- Hang a pre-hung door $140–$495; exterior entry door $580–$2,350 installed
- Reach-in closet $870–$3,600; built-ins $240–$920/linear ft; pergola $2,400–$7,500
Prices verified November 2026 · Cross-referenced against 24+ American pricing sources · See methodology
Labor with fasteners and basic supplies included; rows marked installed include standard paint-grade material. Durham metro, re-verified November 2026. Painting new trim, permits and premium hardwood are extra.
| Service | Low | Typical | High |
|---|---|---|---|
| Carpenter hourly rate (labor, standard hours)/hr | $40/hr | $65 | $110 |
| Carpenter day rate (8 hours, one carpenter)per day | $320per day | $520 | $880 |
| Baseboard, installed (labor and primed MDF or pine), per linear ftper linear ft | $4per linear ft | $6 | $11 |
| Door and window casing, installed, per linear ftper linear ft | $4per linear ft | $6 | $11 |
| Crown molding, installed, per linear ftper linear ft | $7per linear ft | $10 | $15 |
| Wainscoting or board-and-batten, installed, per sq ft of wallper sq ft | $9per sq ft | $18 | $35 |
| Hang a pre-hung interior door (labor only, your door)per door | $140per door | $270 | $495 |
| Interior door, installed, mid-range pre-hung door includedper door | $240per door | $420 | $790 |
| Exterior entry door, installed (steel or fiberglass door included)per door | $580per door | $1,200 | $2,350 |
| Door repair or rehang (sticking, sagging, loose frame)per job | $95per job | $180 | $360 |
| Wood window repair (sash, sill or rotted trim)per job | $140per job | $295 | $590 |
| Framing, labor and lumber, per sq ft of floor area (walls, not roof)per sq ft | $7per sq ft | $11 | $19 |
| Deck building labor, per sq ft (framing and decking, materials extra)per sq ft | $7per sq ft | $13 | $20 |
| Deck repair (replace boards, a joist or a railing section)per job | $285per job | $820 | $2,300 |
| Stair repair (squeaky or loose tread, baluster, newel)per job | $140per job | $360 | $1,100 |
| Stair handrail or railing, installed, per linear ftper linear ft | $19per linear ft | $35 | $85 |
| Reach-in closet build-out (shelves, rods and drawers, installed)per closet | $870per closet | $1,700 | $3,600 |
| Walk-in closet system, installedper closet | $2,400per closet | $4,700 | $9,400 |
| Closet doors (bifold or bypass), replacedper opening | $190per opening | $370 | $790 |
| Extra drawer unit in a closet or built-inper drawer | $95per drawer | $165 | $235 |
| Custom built-ins (bookcase, entertainment wall), installed, per linear ftper linear ft | $240per linear ft | $460 | $920 |
| Shelving installation (floating or wall shelves, a few)per job | $140per job | $315 | $720 |
| Rot or structural repair (sill plate, rim joist, fascia or post)per job | $475per job | $1,400 | $3,700 |
| Pergola, 10 × 12 ft wood, built on siteper pergola | $2,400per pergola | $4,200 | $7,500 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local carpenters in Durham
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need a carpenter for?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the carpenters who reply.
Where should they text you?
- Max 2 carpenters. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched carpenters see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 carpenters about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Prices verified November 2026 · Cross-referenced against 24+ American pricing sources · See methodology
Figures are for the Durham metro area. Trip charges can apply on the far edges; parking and old, out-of-square buildings in Downtown & Brightleaf cost the most.
Carpenter rates across Durham
Same trade, four price bands. Parking, stairs and out-of-square old walls push Downtown & Brightleaf to the top; rates in Duke & Ninth Street tend to come in at or under the city typical, and Chapel Hill & RTP has the decks, pergolas and closets.
Downtown & Brightleaf
- Hourly
- $45–$125/hr
- Day rate
- $345–$985 / day rate
The priciest part of the metro for a carpenter's visit: parking, elevators to book and out-of-square old walls that make every piece of trim a custom cut.
East Durham & Hayti
- Hourly
- $40–$115/hr
- Day rate
- $330–$935 / day rate
Lots of fix-and-flip and whole-house remodels, so finish carpenters are busy here. Quotes vary widely; get two, and make sure both say who paints and fills the trim.
Duke & Ninth Street
- Hourly
- $40–$105/hr
- Day rate
- $305–$855 / day rate
Lots of rentals and houses split into units. Landlord work — doors, locks, trim, deck boards — keeps small jobs common, and prices sit a little under the city average.
Chapel Hill & RTP
- Hourly
- $40–$115/hr
- Day rate
- $320–$905 / day rate
Plenty of houses from the last 30 years with square, level framing, so trim and doors go in fast. Decks and pergolas are the big-ticket jobs here.
Real-world carpentry costs in Durham
Here's what common carpenter jobs cost in Durham in 2026, labor, fasteners and basic supplies included.
One quick fix — a sticking or sagging door
Planing an edge, shimming a hinge or resetting a strike plate takes under an hour, but most Durham carpenters charge a minimum of $95–$355. Priced as a flat job it is $95–$360. Add a second small job to the same visit and the minimum stops hurting.
Trim out a 12 × 12 bedroom — baseboard, crown, one door and one window
About 45 ft of baseboard ($180–$495), 48 ft of crown ($335–$720), casing on the door ($70–$185) and the window ($115–$225) comes to $700–$1,625 in Durham, with primed MDF or pine. Filling, caulking and painting the trim is usually a separate line or a painter's job.
Replace three interior doors and fix a fourth
Three mid-range pre-hung doors installed at $420 each plus one repair at $180 is about $1,440. If the old doors are odd sizes — common in homes built before 1950 — the carpenter may have to trim or build out jambs, which pushes each door toward $790.
Reach-in closet build-out with two extra drawers
Shelves, a double hanging rod and a shoe rack in a standard 6–8 ft reach-in run $870–$3,600 in Durham; two drawer units add $165 each, for about $2,030. A walk-in closet system is $2,400–$9,400.
Rotted rim joist and a deck repair
Cutting out a rotted sill or rim joist and sistering new lumber is $475–$3,700 depending on how far the rot runs; replacing a few deck boards and a railing section is $285–$2,300. Together about $2,220. Anything load-bearing may need a permit in Durham, and the carpenter should say so before starting.
How much does a carpenter cost in Durham?
A carpenter in Durham bills $40–$110 an hour, about $65 typical. Older homes take longer — out-of-square openings, plaster, odd-size doors — so the same trim job can cost more in East Durham & Hayti than in a newer subdivision.
Bigger builds are priced flat: a reach-in closet build-out $870–$3,600, custom built-ins $240–$920 a linear foot, a 10 × 12 wood pergola $2,400–$7,500. Figures re-checked against 24 sources in November 2026.
Carpenter rates and fees in Durham (2026)
Standard rates run $40–$110/hr, a full day $320–$880, and the minimum charge for a small job $95–$355.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Standard hourly rate (general carpenter) | $40 | $65 | $110 |
| Finish or trim carpenter, hourly | $55 | $85 | $140 |
| Framing carpenter, hourly | $35 | $55 | $80 |
| Master carpenter, hourly | $75 | $105 | $175 |
| Minimum charge for a small job | $95 | $175 | $355 |
| Service call (1–1.5 hours of the rate) | $40 | $80 | $165 |
| Half day (4 × the hourly rate) | $160 | $260 | $440 |
| Full day (8 × the hourly rate) | $320 | $520 | $880 |
The hourly rate is the small part. A finish carpenter at $85/hr who cuts clean miters once costs less than a cheaper one at $55/hr whose joints need filling, caulking and a repaint.
What moves a carpentry quote in Durham:
- Finish or rough — framing bills $35–$80/hr and is priced per square foot; finish work bills $55–$140/hr because every joint shows.
- The minimum — most carpenters charge $95–$355 for any visit, so a 30-minute door fix costs far more per minute than a day of trim.
- Materials — paint-grade MDF or finger-joint pine is the cheap case; stain-grade oak, poplar or hardwood trim can double the material line, plus a 10–20% markup if the carpenter buys it.
- The age of the house — out-of-square openings, plaster walls and odd-size doors in East Durham & Hayti add hours; new construction in Chapel Hill & RTP goes fast.
- Permits — trim, doors and closets need none; framing, load-bearing changes, decks and stairs usually do, and the permit plus any structural drawings add $50–$500 and up.
Ask every Durham carpenter the same five things: hourly or flat, the minimum charge, who buys the lumber and at what markup, whether filling, caulking and painting are included, and who pulls the permit if one is needed. Get a quote for your carpentry job →
Carpenter cost in Durham by job size
One small fix is $95–$355 (the minimum charge), a half day $160–$440, a full day $320–$880. A whole-room trim package is $700–$1,625, a reach-in closet $870–$3,600, a pergola $2,400–$7,500.
Worked example: trimming out a 12 × 12 bedroom in Durham. About 45 ft of baseboard at $6 a foot ($270), 48 ft of crown at $10 ($480), casing on one door ($100) and one window ($160) comes to about $1,010 with primed material, before paint.
A bigger job: framing the walls of a 12 × 12 room at $11 a square foot with lumber is about $1,600, and a 10 × 12 wood pergola is $4,200 typical. The pergola costs more per hour of work because the lumber, hardware and footings are in the price; framing is mostly labor.
Who to hire in Durham and what each carpenter costs
| Who to hire | Cost | Best for |
|---|---|---|
| General carpenter (journeyman) | $45–$90/hr | Doors, trim, decks, repairs and most everyday jobs. The rate most homeowners see. |
| Finish or trim carpenter | $55–$140/hr | Baseboard, casing, crown molding, wainscoting and stairs where the joints show. Slower and neater than a framer. |
| Framing (rough) carpenter | $35–$80/hr | Walls, floors, decks and additions, usually priced per square foot ($7–$19) rather than by the hour. |
| Cabinetmaker or built-ins specialist | $70–$110/hr | Custom bookcases, entertainment walls and closets, usually quoted per linear foot ($240–$920). |
| Master carpenter | $75–$175/hr | Complex stairs, curved work, historic trim profiles and jobs where nothing is standard. |
| Apprentice or helper | $35–$50/hr | Billed alongside a lead carpenter on bigger jobs. A two-person framing crew runs $75–$135/hr. |
| Handyman doing carpentry | $40–$90/hr | Rehanging a door, a few feet of baseboard, a loose railing. Not for structural work or anything that needs a permit. |
| Day rate (8 hours, one carpenter) | $320–$880 per day | A list of small jobs, a trim package or a two-day build. Cheaper than several separate visits. |
Hourly rate vs what you actually pay — the Durham carpentry bill
A $65/hr rate rarely shows up as $65 on the invoice. Most Durham carpenters charge a $95–$355 minimum, so fixing one door costs $95–$360 as a flat job. Trim is priced by the foot — $4–$11 for baseboard, $7–$15 for crown — and the per-foot price already includes the material, the cuts, the nailing and the drive, which is why it works out to more than the hourly rate alone.
Compare flat prices, not hourly headlines. Two quotes for a 12 × 12 bedroom's trim ($700–$1,625 here) can differ by a third depending on whether one includes the material, the filling and caulking, and hauling the old trim away. Ask what is in each line before you compare the totals.
What's included in a Durham carpenter's quote (and what costs extra)
A standard carpentry quote covers labor, fasteners, glue and shims, cutting and fitting, and cleanup of the work area. Often left out:
- Materials — lumber, trim, doors and hardware, plus a 10–20% markup if the carpenter buys them
- Filling, caulking and painting — new trim usually arrives primed; painting it is $1–$4 a foot extra or a painter's job
- Service call and the minimum — a service call is billed as $40–$165; $95–$355 minimum on a short visit
- Permits and drawings — $50–$500 for a permit on framing, decks or stairs; $250–$1,000 for structural drawings on a load-bearing change
Ask for the price in writing before work starts, and for proof of liability insurance.
Finish or rough work
Framing carpenters in Durham bill $35–$80/hr, or $7–$19 a square foot with lumber. Finish carpenters bill $55–$140/hr because trim, stairs and built-ins show every cut.
Minimums and travel
Most carpenters charge a $95–$355 minimum, and a service call is billed as $40–$165 — one to one and a half hours of the rate — before the work starts.
Materials and markup
Primed MDF baseboard costs a few dollars a foot; stain-grade hardwood several times that. If the carpenter buys the lumber, expect the receipt plus a 10–20% markup. An interior door itself runs $30–$350 at the home center before labor.
Who does the work
A handyman doing light carpentry bills $40–$90/hr; a journeyman carpenter $45–$90/hr; a master $75–$175/hr. Pay for the skill the job needs — a sagging door does not need a master, a curved stair does.
Licensing and permits
Check your state contractor board for the dollar line above which a carpenter must hold a contractor license or registration, and ask your city building department whether the job needs a permit — framing, decks, stairs and structural repair usually do; trim, doors and closets usually do not.
Labor rates in Durham
Carpenters in the Durham-Chapel Hill metro earn a median $51,540 a year in federal wage data, about 15% below the US median. An hourly rate is almost all labor, so Durham prices land about 13% below the US typical of $75/hr.
The age of the house
Homes built before 1950 rarely have square openings or standard door sizes, and plaster walls crack when trim is nailed. Expect more hours in East Durham & Hayti and Downtown & Brightleaf; newer homes in Chapel Hill & RTP go faster.
- Batch small jobs into one visit.One $175 minimum can cover a door fix, a loose railing and a few feet of trim. Write a list before the carpenter arrives.
- Book a day rate for long lists.A full day in Durham is $320–$880. A trim package or four or five small jobs often costs less this way than flat prices one at a time.
- Choose paint-grade trim.Primed MDF or finger-joint pine baseboard costs a fraction of stain-grade oak and installs faster. Baseboard runs $4–$11 a foot installed here; hardwood can double the material line.
- Buy the doors and hardware yourself.An interior door costs $30–$350 at the home center. Supplying it skips the markup and the store run; labor to hang a pre-hung door is $140–$495.
- Get the finish line in writing.Ask whether filling nail holes, caulking and painting the trim are in the price. Many carpenters leave trim primed and unpainted, and a painter charges extra to finish it.
- Keep structural work permitted.Don't pay a carpenter to skip a permit on framing, a deck or a stair in North Carolina. A failed inspection or an insurance denial costs more than the permit.
Durham carpenters quote by the hour, by the foot or by the job. Before you pay a deposit, get these in writing:
- The carpenter's name, business name and proof of liability insurance
- Hourly rate plus the minimum charge, or a flat price per job
- Each job on its own line — doors, trim per foot, closets, repairs
- Materials: species and grade (paint-grade MDF, pine, poplar, oak), who buys them and at what markup
- Whether filling, caulking and painting the trim are included
- Removal and disposal of old trim, doors or rotted lumber
- Whether the job needs a permit, and who pulls it
- Start and finish dates, payment stages and the warranty on the work
How much does a carpenter cost per hour in Durham?
$40–$110/hr, and $65/hr is typical. Framers bill $35–$80/hr, finish carpenters $55–$140/hr, and most charge a $95–$355 minimum.
What is a carpenter's day rate in Durham?
About $320–$880 for 8 hours, before materials. It is the cheapest way to clear a list of small jobs or a trim package; a single service call is billed as $40–$165.
How much does it cost to install baseboard or crown molding in Durham?
Baseboard is $4–$11 a linear foot installed with primed material, crown molding $7–$15. A 12 × 12 room's baseboard runs $180–$495; its crown $335–$720.
How much does it cost to hang a door in Durham?
$140–$495 labor to hang a pre-hung interior door you supply, or $240–$790 with a mid-range door included. An exterior entry door installed is $580–$2,350.
How much is framing per square foot in Durham?
$7–$19 per square foot of floor area with lumber, for walls. Framing a 12 × 12 room is about $1,000–$2,750; a single interior wall with drywall $950–$4,600.
How much do custom closets and built-ins cost in Durham?
A reach-in closet build-out is $870–$3,600, a walk-in system $2,400–$9,400, and custom built-ins $240–$920 per linear foot installed.
Do I need a licensed carpenter in North Carolina?
Check your state contractor board for the dollar line above which a carpenter must hold a contractor license or registration, and ask your city building department whether the job needs a permit — framing, decks, stairs and structural repair usually do; trim, doors and closets usually do not.
Do I need a permit for carpentry work?
Not for trim, doors, closets, shelving or like-for-like repairs. Framing, moving or removing a wall, new window or door openings, decks over a small size, stairs and structural rot repair usually need a building permit, and a load-bearing change may need drawings from a licensed structural engineer. Ask the carpenter who pulls it. This is general information, not legal advice.
Is it cheaper to pay a carpenter by the hour or by the job?
For one clear job — a door, a run of trim, a closet — a flat price is usually cheaper and safer. For a long list, a day rate ($320–$880) costs less than paying $95–$355 minimums one visit at a time.
Does a carpenter supply the lumber and doors?
Most will, at cost plus a 10–20% markup, and some charge for the trip. You can save by buying doors ($30–$350 each for the door itself) and hardware yourself; let the carpenter pick the trim stock so the profiles match.
Prices verified November 2026 · Cross-referenced against 24+ American pricing sources · See methodology
Prices for the Durham metro area, November 2026. Outer suburbs may vary.
Get a fair carpenter quote in Durham
Local carpenters · Free quotes · No obligation, no spam.