Carpenter Cost USA 2026: Hourly Rates and Job Prices
By Our research team · Last verified · 12 min read · Methodology
Carpenter costs in the US
What most homeowners pay for carpentry job, labor, fasteners and basic supplies included. Pick your city for local prices.
How we get this data- Typical
- $75/hr
- Low end
- $30/hr
- High end
- $200/hr
A carpenter in the USA costs $45–$125 an hour in 2026, and most homeowners pay about $75/hr, or $360–$1,000 for a full day. Most jobs are quoted flat: $150–$550 to hang a pre-hung interior door, $4–$12 a foot for baseboard installed, $900–$3,800 for a reach-in closet build-out and $2,500–$8,000 for a 10 × 12 wood pergola.
$45–$125/hr for a US carpenter — $75/hr typical, or $360–$1,000 a day. Budget $150–$550 to hang a pre-hung door, $4–$12 a foot for baseboard and $900–$3,800 for a reach-in closet build-out. Pick your city ↓
- US carpenter rates: $45–$125/hr, $75/hr typical; day rate $360–$1,000
- Finish carpenter $60–$160/hr; framer $40–$90/hr; minimum charge $100–$400
- Baseboard $4–$12/ft, crown $7–$16/ft installed; hang a door $150–$550
- Reach-in closet $900–$3,800; built-ins $250–$1,000/linear ft; framing $7–$20/sq ft
- Pick a city below for local prices across 195 US metros
Prices come from national cost guides, platform price data, dated city price pages, home-center lumber prices, federal wage data for carpenters, state licensing boards and the residential building code, checked in November 2026 and priced for 195 US metros. Hourly and per-job figures are labor with fasteners and basic supplies; rows marked installed include standard paint-grade material. Painting new trim, permits and premium hardwood are extra.
Carpenters charge $45–$125/hr across the US, and the median carpenter earns $29.12/hr ($60,580 a year) in federal data — the gap is the truck, tools, insurance, travel and the hours nobody bills. Credible quotes run from about $30/hr for a trim helper or a rural carpenter to $200/hr for a master or finish carpenter in a top-cost city. The highest typical rates on our city pages are in San Francisco, Oakland, Honolulu, Los Angeles and Chicago; the lowest are in Tulsa, McAllen, El Paso, Lakeland and Little Rock.
Prices verified November 2026 · Cross-referenced against 24+ American pricing sources · See methodology
Carpenter cost by city
Typical carpenter ranges, re-verified November 2026 across 24+ sources. Largest cities first.
Among the biggest metros, San Francisco is the priciest at $100/hr and Houston the least at $65/hr.
Half of the 195 metros we price sit between $65 and $75/hr.
Each city page has local rates by area, real-world carpentry costs and a city-specific FAQ. Prices shown are the low end of the typical range, per hour.
Alabama
- Birminghamfrom $40
- Huntsvillefrom $40
- Mobilefrom $40
- Montgomeryfrom $40
- Tuscaloosafrom $40
Arkansas
- Little Rockfrom $40
- Fayettevillefrom $40
California
- Los Angelesfrom $55
- San Franciscofrom $60
- Riversidefrom $50
- San Diegofrom $50
- Orange Countyfrom $55
- Oaklandfrom $60
- Sacramentofrom $50
- San Josefrom $55
- Fresnofrom $45
- Bakersfieldfrom $45
- Oxnardfrom $50
- Stocktonfrom $50
- Modestofrom $50
- Santa Rosafrom $55
- Visaliafrom $45
- Long Beachfrom $55
- Santa Barbarafrom $50
- Salinasfrom $45
Colorado
- Denverfrom $45
- Colorado Springsfrom $45
- Fort Collinsfrom $45
- Boulderfrom $45
Connecticut
- Hartfordfrom $45
- Bridgeportfrom $45
- New Havenfrom $45
- Stamfordfrom $45
Delaware
- Wilmingtonfrom $45
District of Columbia
- Washingtonfrom $45
Florida
- Miamifrom $45
- Tampafrom $40
- Orlandofrom $40
- Fort Lauderdalefrom $40
- Jacksonvillefrom $40
- West Palm Beachfrom $40
- St. Petersburgfrom $40
- Sarasotafrom $40
- Fort Myersfrom $40
- Lakelandfrom $40
- Daytona Beachfrom $40
- Palm Bayfrom $40
- Pensacolafrom $40
- Tallahasseefrom $40
- Gainesvillefrom $40
Idaho
- Boisefrom $40
Indiana
- Indianapolisfrom $45
- Fort Waynefrom $45
- Evansvillefrom $45
- South Bendfrom $45
Iowa
- Des Moinesfrom $45
- Davenportfrom $45
- Cedar Rapidsfrom $45
Kentucky
- Louisvillefrom $45
- Lexingtonfrom $40
Louisiana
- New Orleansfrom $40
- Baton Rougefrom $45
- Lafayettefrom $40
- Shreveportfrom $40
Maine
- Portlandfrom $45
Maryland
- Baltimorefrom $45
Massachusetts
- Bostonfrom $55
- Worcesterfrom $50
- Springfieldfrom $50
Michigan
- Detroitfrom $50
- Grand Rapidsfrom $45
- Lansingfrom $45
- Flintfrom $45
- Ann Arborfrom $45
Minnesota
- Minneapolisfrom $50
- Duluthfrom $45
- Rochesterfrom $45
Mississippi
- Jacksonfrom $40
- Gulfportfrom $40
- Hattiesburgfrom $40
Missouri
- St. Louisfrom $50
- Kansas Cityfrom $45
- Springfieldfrom $40
- Columbiafrom $45
New Hampshire
- Manchesterfrom $45
New Jersey
- Newarkfrom $50
- Trentonfrom $45
- Jersey Cityfrom $50
- Atlantic Cityfrom $45
New Mexico
- Albuquerquefrom $45
- Las Crucesfrom $45
- Santa Fefrom $45
New York
North Carolina
- Charlottefrom $40
- Raleighfrom $40
- Greensborofrom $40
- Winston-Salemfrom $40
- Durhamfrom $40
- Fayettevillefrom $40
- Ashevillefrom $40
- Wilmingtonfrom $40
- Greenvillefrom $40
North Dakota
- Fargofrom $45
Ohio
- Cincinnatifrom $45
- Columbusfrom $50
- Clevelandfrom $45
- Daytonfrom $45
- Akronfrom $45
- Toledofrom $45
- Youngstownfrom $45
- Cantonfrom $45
Oklahoma
- Oklahoma Cityfrom $40
- Tulsafrom $40
Pennsylvania
- Philadelphiafrom $45
- Pittsburghfrom $45
- Harrisburgfrom $45
- Scrantonfrom $45
- Eriefrom $45
Rhode Island
- Providencefrom $45
South Carolina
- Greenvillefrom $40
- Columbiafrom $40
- Charlestonfrom $40
- Myrtle Beachfrom $40
South Dakota
- Sioux Fallsfrom $40
Tennessee
- Nashvillefrom $45
- Memphisfrom $40
- Knoxvillefrom $40
- Chattanoogafrom $40
Texas
- Dallasfrom $40
- Houstonfrom $40
- San Antoniofrom $40
- Fort Worthfrom $40
- Austinfrom $40
- McAllenfrom $40
- El Pasofrom $40
- Killeenfrom $40
- Corpus Christifrom $40
- Brownsvillefrom $40
- Beaumontfrom $45
- Arlingtonfrom $40
- Lubbockfrom $40
- Wacofrom $40
- Laredofrom $40
- Amarillofrom $40
Utah
- Salt Lake Cityfrom $45
- Provofrom $40
- Ogdenfrom $40
- St. Georgefrom $40
Vermont
- Burlingtonfrom $45
Virginia
- Virginia Beachfrom $40
- Richmondfrom $40
- Roanokefrom $40
- Norfolkfrom $40
West Virginia
- Charlestonfrom $40
Wyoming
- Cheyennefrom $45
Carpenter prices, 2026
| Job | Low | Typical | High |
|---|---|---|---|
| Carpenter hourly rate (labor, standard hours)/hr | $45 | $75 | $125 |
| Carpenter day rate (8 hours, one carpenter)per day | $360 | $600 | $1,000 |
| Baseboard, installed (labor and primed MDF or pine), per linear ftper linear ft | $4 | $7 | $12 |
| Door and window casing, installed, per linear ftper linear ft | $4 | $7 | $12 |
| Crown molding, installed, per linear ftper linear ft | $7 | $11 | $16 |
| Wainscoting or board-and-batten, installed, per sq ft of wallper sq ft | $10 | $20 | $40 |
| Hang a pre-hung interior door (labor only, your door)per door | $150 | $300 | $550 |
| Interior door, installed, mid-range pre-hung door includedper door | $250 | $450 | $850 |
| Exterior entry door, installed (steel or fiberglass door included)per door | $600 | $1,300 | $2,500 |
| Door repair or rehang (sticking, sagging, loose frame)per job | $100 | $200 | $400 |
| Wood window repair (sash, sill or rotted trim)per job | $150 | $325 | $650 |
| Framing, labor and lumber, per sq ft of floor area (walls, not roof)per sq ft | $7 | $12 | $20 |
| Deck building labor, per sq ft (framing and decking, materials extra)per sq ft | $8 | $15 | $25 |
| Deck repair (replace boards, a joist or a railing section)per job | $300 | $900 | $2,500 |
| Stair repair (squeaky or loose tread, baluster, newel)per job | $150 | $400 | $1,250 |
| Stair handrail or railing, installed, per linear ftper linear ft | $20 | $40 | $90 |
| Reach-in closet build-out (shelves, rods and drawers, installed)per closet | $900 | $1,800 | $3,800 |
| Walk-in closet system, installedper closet | $2,500 | $5,000 | $10,000 |
| Closet doors (bifold or bypass), replacedper opening | $200 | $400 | $850 |
| Extra drawer unit in a closet or built-inper drawer | $100 | $175 | $250 |
| Custom built-ins (bookcase, entertainment wall), installed, per linear ftper linear ft | $250 | $500 | $1,000 |
| Shelving installation (floating or wall shelves, a few)per job | $150 | $350 | $800 |
| Rot or structural repair (sill plate, rim joist, fascia or post)per job | $500 | $1,500 | $4,000 |
| Pergola, 10 × 12 ft wood, built on siteper pergola | $2,500 | $4,500 | $8,000 |
Prices verified November 2026 · Cross-referenced against 24+ American pricing sources · See methodology
National average prices. Select a city above for location-specific pricing.
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local carpenters
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need a carpenter for?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the carpenters who reply.
Where should they text you?
- Max 2 carpenters. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched carpenters see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 carpenters about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Who to hire: carpenter types compared, with hourly rates
A general carpenter bills $50–$100/hr, a finish carpenter $60–$160/hr, a framer $40–$90/hr and a master $80–$200/hr. For a list of small jobs, a day rate ($360–$1,000) is the best value.
| Who to hire | Cost | Best for |
|---|---|---|
| General carpenter (journeyman) | $50–$100/hr | Doors, trim, decks, repairs and most everyday jobs. The rate most homeowners see. |
| Finish or trim carpenter | $60–$160/hr | Baseboard, casing, crown molding, wainscoting and stairs where the joints show. Slower and neater than a framer. |
| Framing (rough) carpenter | $40–$90/hr | Walls, floors, decks and additions, usually priced per square foot ($7–$20) rather than by the hour. |
| Cabinetmaker or built-ins specialist | $75–$125/hr | Custom bookcases, entertainment walls and closets, usually quoted per linear foot ($250–$1,000). |
| Master carpenter | $80–$200/hr | Complex stairs, curved work, historic trim profiles and jobs where nothing is standard. |
| Apprentice or helper | $35–$55/hr | Billed alongside a lead carpenter on bigger jobs. A two-person framing crew runs $80–$150/hr. |
| Handyman doing carpentry | $45–$100/hr | Rehanging a door, a few feet of baseboard, a loose railing. Not for structural work or anything that needs a permit. |
| Day rate (8 hours, one carpenter) | $360–$1,000 per day | A list of small jobs, a trim package or a two-day build. Cheaper than several separate visits. |
Match the carpenter to the job: a framer for walls and decks, a finish carpenter for trim and stairs, a cabinetmaker for built-ins. Whoever you hire, ask for proof of liability insurance and a written price, and keep structural work permitted.
Common carpentry jobs and what they cost (2026)
Most carpentry is priced by the job, not the hour. Hanging a pre-hung door is $150–$550, trimming out a 12 × 12 bedroom $705–$1,765, and a reach-in closet build-out $900–$3,800. Time on site is in brackets.
| Block or rate | Low | Typical | High |
|---|---|---|---|
| Hang a pre-hung interior door (1–2 hrs, door not included) | $150 | $300 | $550 |
| Install an exterior entry door (3–8 hrs, door included) | $600 | $1,300 | $2,500 |
| Trim out one window — casing, stool and apron (1–2 hrs) | $120 | $175 | $250 |
| Baseboard, one 12 × 12 room, about 45 ft (2–4 hrs) | $180 | $315 | $540 |
| Crown molding, one 12 × 12 room (3–5 hrs) | $335 | $530 | $770 |
| Trim out a 12 × 12 bedroom — baseboard, crown, door, window (6–10 hrs) | $705 | $1,140 | $1,765 |
| Frame one interior wall, with drywall (4–10 hrs) | $1,000 | $2,500 | $5,000 |
| Reach-in closet build-out (6–10 hrs) | $900 | $1,800 | $3,800 |
| New straight wood staircase, installed (2–5 days) | $1,000 | $3,000 | $5,000 |
| Rot or structural repair — sill, rim joist or post (1–3 days) | $500 | $1,500 | $4,000 |
| Build a 10 × 12 wood pergola (2–4 days) | $2,500 | $4,500 | $8,000 |
| Covered patio roof or roofed pergola (3–5 days) | $4,000 | $7,500 | $12,000 |
| Build a 12 × 16 pressure-treated deck (3–5 days) — see the deck guide | $4,400 | $7,000 | $10,100 |
| Install hardwood flooring, 500 sq ft (2–4 days) — see the flooring guide | $3,000 | $4,500 | $6,000 |
Most carpenters charge a minimum of $100–$400 for a short visit, so bundle small jobs. For a trim package or a list of repairs, ask for a day rate ($360–$1,000); for framing, decks and pergolas, a flat price with the lumber named.
Finish carpenter vs framing carpenter vs handyman
A finish carpenter bills $60–$160/hr and makes joints disappear; a framer bills $40–$90/hr and builds the structure fast; a handyman bills $45–$100/hr for small repairs under your state's unlicensed limit.
| Factor | Finish carpenter | Framing carpenter | Handyman |
|---|---|---|---|
| Typical rate | $60–$160/hr, or by the foot ($4–$12 baseboard, $7–$16 crown) | $40–$90/hr, or $7–$20 per sq ft with lumber | $45–$100/hr, or a flat price per job |
| Best for | Trim, doors, stairs, built-ins, wainscoting, anything that shows | Walls, floors, decks, additions, rot and structural repair | A sticking door, a loose railing, a few feet of trim, assembly |
| How they price | Per foot, per door, per unit; a day rate for packages | Per square foot or a flat price per structure | Hourly with a $100–$400 minimum, or flat per job |
| Permits | Rarely needed — cosmetic and non-structural | Almost always: framing, openings, decks, stairs, beams | Should not take jobs that need one |
| License | Contractor license or registration above the state's dollar line | Licensed or registered contractor in most states for structural work | Usually none below the state's small-job limit |
| Materials | Paint-grade MDF or pine to stain-grade hardwood; markup 10–20% | Framing lumber, sheathing, hardware — a third to a half of the bill | You often buy the parts; small markup if not |
| Watch out for | Labor-only per-foot prices, no painting line, paint-grade quoted and stain-grade expected | No permit, no lumber price in writing, no mention of a beam on a load-bearing change | Structural work, anything over the state limit, no insurance |
Many small jobs sit on the line: a handyman can rehang a door ($100–$400); a carpenter should build the closet ($900–$3,800); a licensed contractor should open the wall ($1,200–$4,200 for the beam alone).
Rates, fees and lumber prices
Most bills start with a $100–$400 minimum, then $45–$125/hr or a flat price, plus materials at cost and a 10–20% markup. Softwood lumber is $3–$8 a board foot; an interior door $30–$350.
| Fee, rate or material | Low | Typical | High |
|---|---|---|---|
| Minimum charge for a small job | $100 | $200 | $400 |
| Service call (1–1.5 hours of the rate) | $45 | $95 | $190 |
| Standard hourly rate | $45 | $75 | $125 |
| Evening, weekend or rush rate | $70 | $115 | $190 |
| Full day (8 × the hourly rate) | $360 | $600 | $1,000 |
| Softwood framing lumber, per board foot | $3 | $5 | $8 |
| Hardwood, per board foot | $8 | $14 | $20 |
| MDF baseboard, material per linear ft | $1 | $2 | $4 |
| Solid wood trim, material per linear ft | $1 | $5 | $10 |
| Interior door, material only | $30 | $120 | $350 |
Materials are extra on hourly work — usually the receipt plus a 10–20% markup if the carpenter buys them. Per-foot and installed rows on this page already include standard paint-grade material.
What affects carpenter costs
Finish or rough work
Framers bill $40–$90/hr and price by the square foot ($7–$20 with lumber). Finish carpenters bill $60–$160/hr because every joint shows; masters $80–$200/hr.
Minimums and service calls
A $100–$400 minimum is normal, and a service call is billed as $45–$190 — one to one and a half hours of the rate. Tiny jobs cost far more per minute than a day of trim.
Materials
MDF baseboard is $1–$4 a foot and solid wood trim $1–$10; hardwood runs $8–$20 a board foot against $3–$8 for softwood. An interior door is $30–$350. Expect a 10–20% markup if the carpenter buys them.
Your city
Carpenters' median pay runs from about $36,000 a year in Brownsville, Texas, to over $89,000 in the San Francisco metro in federal data. Typical rates on our city pages run from $60/hr in Tulsa to $100/hr in San Francisco.
Permits and licensing
Trim and doors need no permit; framing, decks, stairs and structural repair do ($50–$500 plus $250–$1,000 for structural drawings on a load-bearing change). Most states license or register contractors above a dollar line, and the licensed price is higher.
The age of the house
Homes built before 1950 rarely have square openings or standard door sizes, and plaster cracks when trim is nailed. The same door or trim job takes longer there than in a 1990s subdivision.
How to save on carpenter
- Bundle small jobs.One $200 minimum can cover a door fix, a loose railing and a run of trim. Write a list before the visit.
- Book a day rate for long lists.Eight hours ($360–$1,000) usually costs less than several flat prices paid one at a time.
- Choose paint-grade trim.Primed MDF at $1–$4 a foot installs fast and hides filled nail holes. Save the hardwood ($8–$20 a board foot) for stair rails and anything stained.
- Buy doors and hardware yourself.An interior door is $30–$350 at the home center. Supplying it skips the markup; let the carpenter choose the trim stock so profiles match.
- Book interior work in winter.Decks and pergolas fill a carpenter's summer; trim, doors and built-ins are the winter work, and day rates soften when the calendar is open.
- Keep structural work permitted.A permit costs less than a failed inspection, an insurance denial or a buyer's lawyer. Ask who pulls it before the first cut.
Get two real quotes
Local carpenters · free · max 2 will contact you · no spam.
Carpenter cost in the USA by job size
One small fix is $100–$400 (the minimum charge), a half day $180–$500, a full day $360–$1,000. A 12 × 12 room's trim is $705–$1,765, a reach-in closet $900–$3,800, a 10 × 12 pergola $2,500–$8,000, and framing a 12 × 12 room $1,000–$2,900.
Worked example: trimming out a 12 × 12 bedroom. About 45 ft of baseboard at $7 a foot ($315), 48 ft of crown at $11 ($530), casing on one door ($120) and one window ($175) comes to about $1,140 with primed material, before paint. Do the whole house at once and the per-foot price drops: about 500 ft of baseboard and casing runs $2,000–$5,000.
Bigger builds carry more material. A 10 × 12 wood pergola is $4,500 typical and framing a 12 × 12 room $1,750; on both, the lumber is a third to a half of the bill, so the quote should name the lumber and say whether a price move is passed through.
What a carpenter quote should include
A real carpentry quote answers all of these. If it answers fewer than six, ask before you pay a deposit.
- The carpenter's name, business name and proof of liability insurance
- Hourly rate plus the minimum charge, or a flat price per job
- Each job on its own line — doors, trim per foot, closets, repairs
- Materials: species and grade (paint-grade MDF, pine, poplar, oak), who buys them and at what markup
- Whether filling, caulking and painting the trim are included
- Removal and disposal of old trim, doors or rotted lumber
- Whether the job needs a permit or structural drawings, and who pulls it
- Lead time for shop-built pieces such as built-ins
- Start and finish dates, payment stages and the warranty on the work
Does your carpenter need a license, and does the job need a permit?
Trim, doors, closets and shelving need no permit anywhere in the US. Framing, new openings, decks, stairs and structural repair almost always do, and most states draw a dollar line above which the carpenter must be a licensed or registered contractor. A permit for a structural change runs $50–$500; structural drawings $250–$1,000.
| Job | Permit? | Typical permit cost | Who should do it |
|---|---|---|---|
| Baseboard, casing, crown, wainscoting, shelving, closets | No | — | Any carpenter or handyman |
| Replace a door or window in the same opening | Usually no | — | Carpenter or handyman |
| New door or window opening, or moving one | Yes | $50–$500; plus $250–$1,000 drawings if the wall is load-bearing | Licensed contractor |
| Frame a new wall, room, basement or addition | Yes | $50–$500 for a structural change; $500–$2,000 for new construction | Licensed contractor |
| Open or remove a load-bearing wall (beam) | Yes | $50–$500 plus $250–$1,000 for drawings; $500–$800 all in per the cost guides | Licensed contractor |
| Pergola or deck | Usually yes | $60–$150 for a pergola; some cities waive it under 200 sq ft | Licensed contractor in most states |
| Sill plate, rim joist or joist replacement | Yes | $150–$2,000 depending on scope | Licensed contractor |
Permit costs from national cost guides (sources in our research notes); your city sets the actual fee. Rules change; confirm with your building department and state contractor board. Not legal advice.
The dollar figures above come from the national cost guides we read: $50–$500 for a permit on a structural change, $500–$2,000 for new construction, $60–$150 for a pergola, and $150–$2,000 for sill-plate and joist work, with a licensed structural engineer's drawings at $250–$1,000 where a load-bearing wall is touched. Your city sets the real fee, usually on a schedule tied to the job's value, so ask the carpenter to show the permit line as its own item.
Licensing works the same way in most states: below a dollar line, anyone can do paid trim, door and repair work; above it, or for anything structural, the person must hold a state contractor license or registration, carry insurance and often a bond. The line is low in some states and absent in others, so the two things to check everywhere are the license number (where the state has one) and a certificate of liability insurance.
- Ask the carpenter whether the job needs a permit before the quote, not after — framing, openings, decks, stairs and beams almost always do
- Make the permit its own line on the quote, with who pulls it
- On a load-bearing change, insist on drawings from a licensed structural engineer; the carpenter sizes the beam from them, not from habit
- Where your state licenses contractors, check the number on the board's website; everywhere, ask for proof of liability insurance
- Unpermitted structural work surfaces at sale, in an insurance claim or at the next inspection — the permit is the cheap part
A licensed, insured carpenter is not always the cheapest quote, but a deck that fails inspection or a wall opened without a permit is your problem at sale time, not the carpenter's.
What lumber costs in 2026, the new tariffs, and how much of a carpentry bill is wood
Wood is a small share of a trim or door bill and a third to a half of a framing or pergola bill. Softwood framing lumber runs $3–$8 a board foot, hardwood $8–$20, and framing lumber with fasteners $4–$17 per square foot of floor area; MDF baseboard is $1–$4 a foot before installation.
| Material | Retail price | Where it shows up | Source |
|---|---|---|---|
| Softwood framing lumber | $3–$8 per board foot | Walls, decks, pergolas, rough framing | National cost guide, 2026 |
| Hardwood (oak, maple, poplar and up) | $8–$20 per board foot | Stain-grade trim, stair parts, built-ins | National cost guide, 2026 |
| Composite lumber | $5–$12 per board foot | Deck boards and railings | National cost guide, 2026 |
| Specialty and exotic wood | $20–$50 per board foot | Custom furniture-grade built-ins | National cost guide, 2026 |
| Framing lumber and fasteners | $4–$17 per sq ft of floor area | Framing a wall, room or addition | National cost guide |
| MDF baseboard | $1–$4 per linear ft | Paint-grade trim | National cost guides |
| Solid wood trim | $1–$10 per linear ft | Paint- or stain-grade trim | National cost guides; Houston Aug 2026 page |
| PVC trim | $1–$5 per linear ft | Bathrooms, exteriors, wet areas | National cost guide |
| Polyurethane crown molding | $2–$6 per linear ft | Light, paint-grade crown | National cost guide |
| Pergola materials | Pine $20–$40, cedar $25–$40, redwood $40–$50 per sq ft | A 10 × 12 wood pergola | National cost guide |
| Pergola kit, 12 × 12, DIY | $700–$4,000 | Kit assembly labor $600–$1,500 on top | National cost guide |
Home-center shelf prices before contractor discounts and sales; lumber is a traded commodity and moves weekly.
Material matters most on the jobs that use the most wood. On trim, MDF baseboard at $1–$4 a foot is a small slice of the $4–$12 installed price; on a 10 × 12 pergola, cedar at $25–$40 a square foot of material is a third to a half of the $2,500–$8,000 job, and on framing, lumber and fasteners at $4–$17 a square foot sit inside a $7–$20 total. That is why framing, deck and pergola quotes should name the lumber and say whether a price move is passed through, while trim and door quotes rarely need to.
Lumber is a traded commodity that moves daily, and import duties on softwood lumber changed in 2025; the carpenter's hourly rate did not move with it. The federal median carpenter's pay rose 2.1% from May 2024 to May 2025, which is the year-on-year figure we carry for the hourly rate. Treat a lumber-price story as a reason to check the material line, not the labor line.
- Paint-grade MDF or finger-joint pine for anything painted; it is a fraction of hardwood's $8–$20 a board foot
- Ask the carpenter to buy trim stock: profiles match across rooms and the contractor discount is real
- On framing, decks and pergolas, get the lumber species, grade and quantity on the quote, and ask whether a price move is passed through
- Composite deck boards cost more than pressure-treated pine up front and less to maintain; ask for both prices
If a quote jumps between the estimate and the invoice, ask for the lumber receipt. On trim and door jobs the wood is a small share; on framing and a pergola it is a third to a half, and a carpenter can fairly ask to pass a price move through.
What the cheap quote leaves out, when to book, and the DIY math
Two quotes for the same trim job can be a third apart, and the gap is usually scope, not skill. Here is what a low number tends to skip, when carpenters are hungry for work, and which jobs pay to do yourself.
Timing moves the price. Carpenters who build decks, pergolas and additions are busiest from late spring through early fall, when slots fill weeks ahead; interior work — trim, doors, built-ins, closets — slows in winter and many will discount a day rate ($360–$1,000) to keep crews busy. Shop-built pieces like built-ins can be built in winter and installed in a day whenever you like.
The DIY math: MDF baseboard is $1–$4 a foot, so a 12 × 12 room's material is about $90 against $180–$540 installed — a fair trade for a weekend if you own a miter saw and the corners are square. An interior door is $30–$350 at the store against $250–$850 installed, but hanging one plumb in an old opening is harder than it looks. Crown molding, stairs, anything structural and anything stain-grade are the jobs to hire out.
- Material not in the price.A per-foot or per-door price that is labor only looks cheap until the lumber receipt arrives. Baseboard installed with primed MDF is $4–$12 a foot; the MDF itself is $1–$4 a foot.
- No filling, caulking or paint.Trim arrives primed. Finishing it is $1–$4 a foot or a painter's job. A quote that does not say who paints is a quote that leaves it to you.
- Old trim and doors left on the curb.Removal, disposal and patching the drywall that the old trim hid are separate lines on an honest quote.
- Paint-grade quoted, stain-grade expected.Make the quote name the material: primed MDF, finger-joint pine, poplar, oak. The difference is several dollars a foot and many hours of care.
- No permit on structural work.Skipping the $50–$500 permit on framing, a deck or a stair saves the carpenter time and leaves you with unpermitted work at sale. Hourly-rate quotes for structural jobs without a permit line are the red flag.
- No insurance.A carpenter without general liability and, if a helper is coming, workers' compensation is cheaper for a reason. Ask for the certificate.
If you want a cheaper pro job without the corner-cutting, pull the old trim yourself, buy paint-grade stock, bundle rooms into a day rate and book interior work in winter.
Carpenter cost: FAQ
How much does a carpenter cost per hour?
$45–$125/hr in 2026, with $75/hr typical. Framers bill $40–$90, finish carpenters $60–$160, masters $80–$200. Credible rates run from about $30/hr for a helper or rural carpenter to $200/hr for a master in a top-cost city.
What is a carpenter's day rate?
About $360–$1,000 for 8 hours, before materials. It is the cheapest way to clear a list of small jobs or a whole-room trim package.
How much does it cost to install baseboards and crown molding?
Baseboard is $4–$12 a linear foot installed with primed material, crown molding $7–$16. A 12 × 12 room is $180–$540 for baseboard and $335–$770 for crown; trimming the whole room out is $705–$1,765.
How much does it cost to hang a door?
$150–$550 in labor for a pre-hung interior door you supply, $250–$850 with a mid-range door, and $600–$2,500 for an exterior entry door installed.
How much does framing cost per square foot?
$7–$20 per square foot of floor area with lumber ($7–$13 labor only). One interior wall with drywall is $1,000–$5,000; a 12 × 12 room's walls $1,000–$2,900.
How much do custom closets and built-ins cost?
A reach-in closet build-out is $900–$3,800, a walk-in system $2,500–$10,000, and custom built-ins $250–$1,000 per linear foot installed — $2,000–$8,000 for an 8-ft bookcase wall.
Does a carpenter need a license?
It depends on the state and the job. Most states draw a dollar line above which any paid home-improvement contractor, carpenters included, must hold a state contractor license or registration; below it, trim, doors and small repairs can be done unlicensed. Structural work — framing, beams, decks, stairs — needs a licensed contractor and a permit almost everywhere. Not legal advice — check your state contractor board and ask for proof of insurance.
Do I need a permit for carpentry?
Not for trim, doors, closets, shelving or like-for-like repairs. Framing, new openings, decks over a small size, stairs and structural repair usually do, at $50–$500 for the permit plus $250–$1,000 for structural drawings on a load-bearing change.
Is it cheaper to pay by the hour or by the job?
For one clear job, a flat price is usually cheaper and safer. For a long list, a day rate ($360–$1,000) costs less than paying $100–$400 minimums one visit at a time. Per-foot prices for trim should say whether material is included.
Are carpenter prices going up in 2026?
Slowly on labor: the median carpenter's pay rose 2.1% in a year in federal data, from $59,310 (May 2024) to $60,580 (May 2025), and an hourly rate is almost all labor. Materials moved more — new import duties on Canadian softwood lumber took effect in 2025 — which shows up on framing, decks and pergolas rather than on the hourly rate.
Done your research?
Pick your city for local prices, or get two real carpenter quotes now. Free, no spam.