How much does a carpenter cost in Tuscaloosa?
By Our research team · Last verified · Methodology
Most carpenters in Tuscaloosa charge $40–$105/hr with $65/hr the going rate. A day rate runs $320–$840, hanging a pre-hung door $135–$470, and baseboard $4–$10 a foot installed.
How we get this data- Typical
- $65/hr
- Low end
- $25/hr
- High end
- $165/hr
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local carpenters send you a real quote. Free, no obligation.
Get my fair quote →The typical Tuscaloosa price is $65/hr, 13% below the US typical of $75/hr.
Tuscaloosa's price band
Tuscaloosa is cheaper than 59% of the 195 US metros we price for carpenter work.
A carpenter in Tuscaloosa charges $40–$105 an hour, and $65/hr is typical. A full day runs $320–$840. Most jobs are quoted flat instead: $135–$470 to hang a pre-hung interior door, $4–$10 a foot for baseboard installed, and $855–$3,500 for a reach-in closet build-out.
Tuscaloosa is a smaller market. Carpenters in the Tuscaloosa metro earn a median $48,870 a year in federal wage data, about 19% below the US median of $60,580, and since an hourly rate is almost all labor, the going rate here lands about 13% below the US typical of $75/hr.
Check your state contractor board for the dollar line above which a carpenter must hold a contractor license or registration, and ask your city building department whether the job needs a permit — framing, decks, stairs and structural repair usually do; trim, doors and closets usually do not. This is general information, not legal advice.
Comparing cities, or after the US-wide picture? See the national guide: Carpenter cost in the USA.
$40–$105/hr for a carpenter in Tuscaloosa — typically $65/hr, or $320–$840 for a full day. Hanging a pre-hung door is $135–$470, baseboard $4–$10 a foot installed, and a reach-in closet build-out $855–$3,500. Verified November 2026. Get free Tuscaloosa quotes →
- Carpenter: $40–$105/hr ($65/hr typical); day rate $320–$840
- Finish carpenter $55–$135/hr; framer $35–$75/hr; minimum $90–$335
- Baseboard $4–$10/ft; crown molding $6–$14/ft installed
- Hang a pre-hung door $135–$470; exterior entry door $570–$2,300 installed
- Reach-in closet $855–$3,500; built-ins $235–$885/linear ft; pergola $2,350–$7,250
Prices verified November 2026 · Cross-referenced against 24+ American pricing sources · See methodology
Labor with fasteners and basic supplies included; rows marked installed include standard paint-grade material. Tuscaloosa metro, re-verified November 2026. Painting new trim, permits and premium hardwood are extra.
| Service | Low | Typical | High |
|---|---|---|---|
| Carpenter hourly rate (labor, standard hours)/hr | $40/hr | $65 | $105 |
| Carpenter day rate (8 hours, one carpenter)per day | $320per day | $520 | $840 |
| Baseboard, installed (labor and primed MDF or pine), per linear ftper linear ft | $4per linear ft | $6 | $10 |
| Door and window casing, installed, per linear ftper linear ft | $4per linear ft | $6 | $10 |
| Crown molding, installed, per linear ftper linear ft | $6per linear ft | $10 | $14 |
| Wainscoting or board-and-batten, installed, per sq ft of wallper sq ft | $9per sq ft | $17 | $35 |
| Hang a pre-hung interior door (labor only, your door)per door | $135per door | $255 | $470 |
| Interior door, installed, mid-range pre-hung door includedper door | $235per door | $405 | $765 |
| Exterior entry door, installed (steel or fiberglass door included)per door | $570per door | $1,200 | $2,300 |
| Door repair or rehang (sticking, sagging, loose frame)per job | $90per job | $170 | $340 |
| Wood window repair (sash, sill or rotted trim)per job | $140per job | $280 | $565 |
| Framing, labor and lumber, per sq ft of floor area (walls, not roof)per sq ft | $7per sq ft | $11 | $18 |
| Deck building labor, per sq ft (framing and decking, materials extra)per sq ft | $7per sq ft | $13 | $20 |
| Deck repair (replace boards, a joist or a railing section)per job | $280per job | $790 | $2,200 |
| Stair repair (squeaky or loose tread, baluster, newel)per job | $135per job | $340 | $1,050 |
| Stair handrail or railing, installed, per linear ftper linear ft | $19per linear ft | $35 | $80 |
| Reach-in closet build-out (shelves, rods and drawers, installed)per closet | $855per closet | $1,650 | $3,500 |
| Walk-in closet system, installedper closet | $2,400per closet | $4,600 | $9,150 |
| Closet doors (bifold or bypass), replacedper opening | $190per opening | $360 | $765 |
| Extra drawer unit in a closet or built-inper drawer | $95per drawer | $160 | $230 |
| Custom built-ins (bookcase, entertainment wall), installed, per linear ftper linear ft | $235per linear ft | $440 | $885 |
| Shelving installation (floating or wall shelves, a few)per job | $135per job | $300 | $690 |
| Rot or structural repair (sill plate, rim joist, fascia or post)per job | $465per job | $1,350 | $3,550 |
| Pergola, 10 × 12 ft wood, built on siteper pergola | $2,350per pergola | $4,100 | $7,250 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local carpenters in Tuscaloosa
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need a carpenter for?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the carpenters who reply.
Where should they text you?
- Max 2 carpenters. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched carpenters see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 carpenters about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Prices verified November 2026 · Cross-referenced against 24+ American pricing sources · See methodology
Prices cover the Tuscaloosa metro. Outlying towns can run a little lower; older homes in Downtown Tuscaloosa and West Tuscaloosa sit at the top of each range for odd sizes and plaster.
Carpenter rates across Tuscaloosa
Same trade, four price bands. Parking, stairs and out-of-square old walls push Downtown Tuscaloosa to the top; rates in University of Alabama tend to come in at or under the city typical, and Northport & Cottondale has the decks, pergolas and closets.
Downtown Tuscaloosa
- Hourly
- $45–$120/hr
- Day rate
- $345–$940 / day rate
The priciest part of the metro for a carpenter's visit: parking, elevators to book and out-of-square old walls that make every piece of trim a custom cut.
West Tuscaloosa
- Hourly
- $40–$110/hr
- Day rate
- $330–$890 / day rate
Older homes being updated one room at a time. Expect a mix of door swaps, trim packages and built-ins; a whole-room trim price is cheaper than paying by the piece.
University of Alabama
- Hourly
- $40–$100/hr
- Day rate
- $305–$815 / day rate
Rental-heavy streets where turnover repairs dominate: doors that stick, broken trim, loose railings. Rates run at or just under the city average.
Northport & Cottondale
- Hourly
- $40–$110/hr
- Day rate
- $320–$865 / day rate
Plenty of houses from the last 30 years with square, level framing, so trim and doors go in fast. Decks and pergolas are the big-ticket jobs here.
Real-world carpentry costs in Tuscaloosa
Here's what common carpenter jobs cost in Tuscaloosa in 2026, labor, fasteners and basic supplies included.
One quick fix — a sticking or sagging door
Planing an edge, shimming a hinge or resetting a strike plate takes under an hour, but most Tuscaloosa carpenters charge a minimum of $90–$335. Priced as a flat job it is $90–$340. Add a second small job to the same visit and the minimum stops hurting.
Trim out a 12 × 12 bedroom — baseboard, crown, one door and one window
About 45 ft of baseboard ($180–$450), 48 ft of crown ($290–$670), casing on the door ($70–$170) and the window ($110–$215) comes to $650–$1,505 in Tuscaloosa, with primed MDF or pine. Filling, caulking and painting the trim is usually a separate line or a painter's job.
Replace three interior doors and fix a fourth
Three mid-range pre-hung doors installed at $405 each plus one repair at $170 is about $1,385. If the old doors are odd sizes — common in homes built before 1950 — the carpenter may have to trim or build out jambs, which pushes each door toward $765.
Reach-in closet build-out with two extra drawers
Shelves, a double hanging rod and a shoe rack in a standard 6–8 ft reach-in run $855–$3,500 in Tuscaloosa; two drawer units add $160 each, for about $1,970. A walk-in closet system is $2,400–$9,150.
Rotted rim joist and a deck repair
Cutting out a rotted sill or rim joist and sistering new lumber is $465–$3,550 depending on how far the rot runs; replacing a few deck boards and a railing section is $280–$2,200. Together about $2,140. Anything load-bearing may need a permit in Tuscaloosa, and the carpenter should say so before starting.
How much does a carpenter cost in Tuscaloosa?
Between $40 and $105 an hour, with most Tuscaloosa homeowners paying about $65. The spread is skill and the job: a framing carpenter bills $35–$75/hr and works fast; a finish carpenter bills $55–$135/hr and makes every joint invisible; a master carpenter $70–$165/hr.
By the job, Tuscaloosa carpenters charge $135–$470 to hang a pre-hung door, $4–$10 a foot for baseboard and $6–$14 a foot for crown molding, so trimming out a 12 × 12 bedroom runs $650–$1,505. Figures re-checked against 24 sources in November 2026.
Carpenter rates and fees in Tuscaloosa (2026)
Standard rates run $40–$105/hr, a full day $320–$840, and the minimum charge for a small job $90–$335.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Standard hourly rate (general carpenter) | $40 | $65 | $105 |
| Finish or trim carpenter, hourly | $55 | $80 | $135 |
| Framing carpenter, hourly | $35 | $50 | $75 |
| Master carpenter, hourly | $70 | $100 | $165 |
| Minimum charge for a small job | $90 | $165 | $335 |
| Service call (1–1.5 hours of the rate) | $40 | $80 | $160 |
| Half day (4 × the hourly rate) | $160 | $260 | $420 |
| Full day (8 × the hourly rate) | $320 | $520 | $840 |
The hourly rate is the small part. A finish carpenter at $80/hr who cuts clean miters once costs less than a cheaper one at $50/hr whose joints need filling, caulking and a repaint.
What moves a carpentry quote in Tuscaloosa:
- Finish or rough — framing bills $35–$75/hr and is priced per square foot; finish work bills $55–$135/hr because every joint shows.
- The minimum — most carpenters charge $90–$335 for any visit, so a 30-minute door fix costs far more per minute than a day of trim.
- Materials — paint-grade MDF or finger-joint pine is the cheap case; stain-grade oak, poplar or hardwood trim can double the material line, plus a 10–20% markup if the carpenter buys it.
- The age of the house — out-of-square openings, plaster walls and odd-size doors in West Tuscaloosa add hours; new construction in Northport & Cottondale goes fast.
- Permits — trim, doors and closets need none; framing, load-bearing changes, decks and stairs usually do, and the permit plus any structural drawings add $50–$500 and up.
Ask every Tuscaloosa carpenter the same five things: hourly or flat, the minimum charge, who buys the lumber and at what markup, whether filling, caulking and painting are included, and who pulls the permit if one is needed. Get a quote for your carpentry job →
Carpenter cost in Tuscaloosa by job size
One small fix is $90–$335 (the minimum charge), a half day $160–$420, a full day $320–$840. A whole-room trim package is $650–$1,505, a reach-in closet $855–$3,500, a pergola $2,350–$7,250.
Worked example: trimming out a 12 × 12 bedroom in Tuscaloosa. About 45 ft of baseboard at $6 a foot ($270), 48 ft of crown at $10 ($480), casing on one door ($100) and one window ($150) comes to about $1,000 with primed material, before paint.
A bigger job: framing the walls of a 12 × 12 room at $11 a square foot with lumber is about $1,600, and a 10 × 12 wood pergola is $4,100 typical. The pergola costs more per hour of work because the lumber, hardware and footings are in the price; framing is mostly labor.
Who to hire in Tuscaloosa and what each carpenter costs
| Who to hire | Cost | Best for |
|---|---|---|
| General carpenter (journeyman) | $45–$85/hr | Doors, trim, decks, repairs and most everyday jobs. The rate most homeowners see. |
| Finish or trim carpenter | $55–$135/hr | Baseboard, casing, crown molding, wainscoting and stairs where the joints show. Slower and neater than a framer. |
| Framing (rough) carpenter | $35–$75/hr | Walls, floors, decks and additions, usually priced per square foot ($7–$18) rather than by the hour. |
| Cabinetmaker or built-ins specialist | $70–$105/hr | Custom bookcases, entertainment walls and closets, usually quoted per linear foot ($235–$885). |
| Master carpenter | $70–$165/hr | Complex stairs, curved work, historic trim profiles and jobs where nothing is standard. |
| Apprentice or helper | $30–$45/hr | Billed alongside a lead carpenter on bigger jobs. A two-person framing crew runs $70–$125/hr. |
| Handyman doing carpentry | $40–$85/hr | Rehanging a door, a few feet of baseboard, a loose railing. Not for structural work or anything that needs a permit. |
| Day rate (8 hours, one carpenter) | $320–$840 per day | A list of small jobs, a trim package or a two-day build. Cheaper than several separate visits. |
Hourly rate vs what you actually pay — the Tuscaloosa carpentry bill
A $65/hr rate rarely shows up as $65 on the invoice. Most Tuscaloosa carpenters charge a $90–$335 minimum, so fixing one door costs $90–$340 as a flat job. Trim is priced by the foot — $4–$10 for baseboard, $6–$14 for crown — and the per-foot price already includes the material, the cuts, the nailing and the drive, which is why it works out to more than the hourly rate alone.
Compare flat prices, not hourly headlines. Two quotes for a 12 × 12 bedroom's trim ($650–$1,505 here) can differ by a third depending on whether one includes the material, the filling and caulking, and hauling the old trim away. Ask what is in each line before you compare the totals.
What's included in a Tuscaloosa carpenter's quote (and what costs extra)
A standard carpentry quote covers labor, fasteners, glue and shims, cutting and fitting, and cleanup of the work area. Often left out:
- Materials — lumber, trim, doors and hardware, plus a 10–20% markup if the carpenter buys them
- Filling, caulking and painting — new trim usually arrives primed; painting it is $1–$4 a foot extra or a painter's job
- Service call and the minimum — a service call is billed as $40–$160; $90–$335 minimum on a short visit
- Permits and drawings — $50–$500 for a permit on framing, decks or stairs; $250–$1,000 for structural drawings on a load-bearing change
Ask for the price in writing before work starts, and for proof of liability insurance.
Finish or rough work
Framing carpenters in Tuscaloosa bill $35–$75/hr, or $7–$18 a square foot with lumber. Finish carpenters bill $55–$135/hr because trim, stairs and built-ins show every cut.
Minimums and travel
Most carpenters charge a $90–$335 minimum, and a service call is billed as $40–$160 — one to one and a half hours of the rate — before the work starts.
Materials and markup
Primed MDF baseboard costs a few dollars a foot; stain-grade hardwood several times that. If the carpenter buys the lumber, expect the receipt plus a 10–20% markup. An interior door itself runs $30–$350 at the home center before labor.
Who does the work
A handyman doing light carpentry bills $40–$85/hr; a journeyman carpenter $45–$85/hr; a master $70–$165/hr. Pay for the skill the job needs — a sagging door does not need a master, a curved stair does.
Licensing and permits
Check your state contractor board for the dollar line above which a carpenter must hold a contractor license or registration, and ask your city building department whether the job needs a permit — framing, decks, stairs and structural repair usually do; trim, doors and closets usually do not.
Labor rates in Tuscaloosa
Carpenters in the Tuscaloosa metro earn a median $48,870 a year in federal wage data, about 19% below the US median. An hourly rate is almost all labor, so Tuscaloosa prices land about 13% below the US typical of $75/hr.
The age of the house
Homes built before 1950 rarely have square openings or standard door sizes, and plaster walls crack when trim is nailed. Expect more hours in West Tuscaloosa and Downtown Tuscaloosa; newer homes in Northport & Cottondale go faster.
- Batch small jobs into one visit.One $165 minimum can cover a door fix, a loose railing and a few feet of trim. Write a list before the carpenter arrives.
- Book a day rate for long lists.A full day in Tuscaloosa is $320–$840. A trim package or four or five small jobs often costs less this way than flat prices one at a time.
- Choose paint-grade trim.Primed MDF or finger-joint pine baseboard costs a fraction of stain-grade oak and installs faster. Baseboard runs $4–$10 a foot installed here; hardwood can double the material line.
- Buy the doors and hardware yourself.An interior door costs $30–$350 at the home center. Supplying it skips the markup and the store run; labor to hang a pre-hung door is $135–$470.
- Get the finish line in writing.Ask whether filling nail holes, caulking and painting the trim are in the price. Many carpenters leave trim primed and unpainted, and a painter charges extra to finish it.
- Keep structural work permitted.Don't pay a carpenter to skip a permit on framing, a deck or a stair in Alabama. A failed inspection or an insurance denial costs more than the permit.
Tuscaloosa carpenters quote by the hour, by the foot or by the job. Before you pay a deposit, get these in writing:
- The carpenter's name, business name and proof of liability insurance
- Hourly rate plus the minimum charge, or a flat price per job
- Each job on its own line — doors, trim per foot, closets, repairs
- Materials: species and grade (paint-grade MDF, pine, poplar, oak), who buys them and at what markup
- Whether filling, caulking and painting the trim are included
- Removal and disposal of old trim, doors or rotted lumber
- Whether the job needs a permit, and who pulls it
- Start and finish dates, payment stages and the warranty on the work
How much does a carpenter cost per hour in Tuscaloosa?
$40–$105/hr, and $65/hr is typical. Framers bill $35–$75/hr, finish carpenters $55–$135/hr, and most charge a $90–$335 minimum.
What is a carpenter's day rate in Tuscaloosa?
About $320–$840 for 8 hours, before materials. It is the cheapest way to clear a list of small jobs or a trim package; a single service call is billed as $40–$160.
How much does it cost to install baseboard or crown molding in Tuscaloosa?
Baseboard is $4–$10 a linear foot installed with primed material, crown molding $6–$14. A 12 × 12 room's baseboard runs $180–$450; its crown $290–$670.
How much does it cost to hang a door in Tuscaloosa?
$135–$470 labor to hang a pre-hung interior door you supply, or $235–$765 with a mid-range door included. An exterior entry door installed is $570–$2,300.
How much is framing per square foot in Tuscaloosa?
$7–$18 per square foot of floor area with lumber, for walls. Framing a 12 × 12 room is about $1,000–$2,600; a single interior wall with drywall $930–$4,400.
How much do custom closets and built-ins cost in Tuscaloosa?
A reach-in closet build-out is $855–$3,500, a walk-in system $2,400–$9,150, and custom built-ins $235–$885 per linear foot installed.
Do I need a licensed carpenter in Alabama?
Check your state contractor board for the dollar line above which a carpenter must hold a contractor license or registration, and ask your city building department whether the job needs a permit — framing, decks, stairs and structural repair usually do; trim, doors and closets usually do not.
Do I need a permit for carpentry work?
Not for trim, doors, closets, shelving or like-for-like repairs. Framing, moving or removing a wall, new window or door openings, decks over a small size, stairs and structural rot repair usually need a building permit, and a load-bearing change may need drawings from a licensed structural engineer. Ask the carpenter who pulls it. This is general information, not legal advice.
Is it cheaper to pay a carpenter by the hour or by the job?
For one clear job — a door, a run of trim, a closet — a flat price is usually cheaper and safer. For a long list, a day rate ($320–$840) costs less than paying $90–$335 minimums one visit at a time.
Does a carpenter supply the lumber and doors?
Most will, at cost plus a 10–20% markup, and some charge for the trip. You can save by buying doors ($30–$350 each for the door itself) and hardware yourself; let the carpenter pick the trim stock so the profiles match.
Prices verified November 2026 · Cross-referenced against 24+ American pricing sources · See methodology
Prices for the Tuscaloosa metro area, November 2026. Outer suburbs may vary.
Get a fair carpenter quote in Tuscaloosa
Local carpenters · Free quotes · No obligation, no spam.