Stucco Cost USA 2026
By Our research team · Last verified · 13 min read · Methodology
Stucco costs in the US
What most homeowners pay for stucco job, labor, paper, lath and three coats on a 2,000 sq ft home. Pick your city for local prices.
How we get this data- Typical
- $17,000
- Low end
- $8,000
- High end
- $38,000
Stuccoing a 2,000 sq ft home in the US costs $12,000–$26,000 in 2026 for a traditional three-coat system, labor and materials, and most homeowners pay about $17,000. That is $6–$13 per square foot of wall. Repairs start at $250; a re-dash over sound stucco is $3–$7 per sq ft and painting $1.50–$4.
$12,000–$26,000 to stucco a 2,000 sq ft home in the US with a traditional three-coat system, labor and materials — $17,000 typical, or $6–$13 per sq ft. A small repair is $250–$900, a re-dash $3–$7 per sq ft, and painting $1.50–$4. Pick your city ↓
- Stucco a 2,000 sq ft home: $12,000–$26,000 ($17,000 typical), or $6–$13 per sq ft
- One-coat $5–$10 per sq ft; synthetic (EIFS) $8–$18; re-dash $3–$7
- Small repair $250–$900; water-damage remediation $15–$50 per sq ft; inspection $400–$1,500
- Painting $1.50–$4 per sq ft ($3,000–$8,000 on 2,000 sq ft); color coat $1.50–$5
- Pick a city below for local prices across 195 US metros
Prices below come from national cost guides, 2026 contractor and city price pages, manufacturer and material data, permit schedules and federal wage data for plasterers and stucco masons, applied across 195 US metros and re-checked in November 2026. Whole-home figures assume about 2,000 sq ft of wall. Pick your city for local pricing.
A single-story home in a cheap Sun Belt market can come in near $8,000; a two-story home in New York with a smooth finish can pass $38,000. Materials are a small share of any bill: cement, sand, lath and paper for a 2,000 sq ft home run $4,000–$8,000. Most of a quote is a crew of plasterers for one to three weeks, the time between coats, scaffolding and the warranty. If the old stucco is sound, a re-dash ($9,000 typical on 2,000 sq ft) or color coat ($6,000) does the job for a third of the price.
Prices verified November 2026 · Cross-referenced against 98+ American pricing sources · See methodology
Stucco cost by city
Typical stucco ranges, re-verified November 2026 across 98+ sources. Largest cities first.
Among the biggest metros, New York is the priciest at $30,800 and Tampa the least at $15,500.
Half of the 195 metros we price sit between $15,700 and $17,200.
| City | Typical range |
|---|---|
| New York, NY | $21,750–$47,100 per 2,000 sq ft |
| Los Angeles, CA | $14,750–$31,950 per 2,000 sq ft |
| Chicago, IL | $15,100–$32,750 per 2,000 sq ft |
| Dallas, TX | $11,100–$24,050 per 2,000 sq ft |
| Houston, TX | $10,950–$23,650 per 2,000 sq ft |
| Washington, DC | $13,150–$28,550 per 2,000 sq ft |
| Atlanta, GA | $11,450–$24,750 per 2,000 sq ft |
| Philadelphia, PA | $13,050–$28,300 per 2,000 sq ft |
| Miami, FL | $11,150–$24,200 per 2,000 sq ft |
| Phoenix, AZ | $11,500–$24,950 per 2,000 sq ft |
| Boston, MA | $12,050–$26,050 per 2,000 sq ft |
| San Francisco, CA | $15,850–$34,400 per 2,000 sq ft |
| Riverside, CA | $11,350–$24,550 per 2,000 sq ft |
| Detroit, MI | $12,900–$28,000 per 2,000 sq ft |
| Seattle, WA | $12,500–$27,050 per 2,000 sq ft |
| Minneapolis, MN | $12,300–$26,650 per 2,000 sq ft |
| San Diego, CA | $12,950–$28,050 per 2,000 sq ft |
| Tampa, FL | $10,950–$23,700 per 2,000 sq ft |
| Orange County, CA | $12,050–$26,050 per 2,000 sq ft |
| Denver, CO | $12,200–$26,450 per 2,000 sq ft |
| Oakland, CA | $13,350–$28,900 per 2,000 sq ft |
| Charlotte, NC | $12,100–$26,200 per 2,000 sq ft |
| Baltimore, MD | $11,400–$24,650 per 2,000 sq ft |
| St. Louis, MO | $14,150–$30,650 per 2,000 sq ft |
| Orlando, FL | $10,100–$21,850 per 2,000 sq ft |
| Brooklyn, NY | $21,450–$46,500 per 2,000 sq ft |
| San Antonio, TX | $11,000–$23,850 per 2,000 sq ft |
| Fort Worth, TX | $11,000–$23,800 per 2,000 sq ft |
| Austin, TX | $11,900–$25,750 per 2,000 sq ft |
| Portland, OR | $13,150–$28,550 per 2,000 sq ft |
| Sacramento, CA | $12,750–$27,600 per 2,000 sq ft |
| Pittsburgh, PA | $12,400–$26,900 per 2,000 sq ft |
| Las Vegas, NV | $11,900–$25,800 per 2,000 sq ft |
| Cincinnati, OH | $12,550–$27,200 per 2,000 sq ft |
| Kansas City, MO | $13,000–$28,200 per 2,000 sq ft |
| Columbus, OH | $12,400–$26,850 per 2,000 sq ft |
| Newark, NJ | $17,300–$37,550 per 2,000 sq ft |
| Nashville, TN | $12,250–$26,550 per 2,000 sq ft |
| Indianapolis, IN | $12,000–$26,000 per 2,000 sq ft |
| Cleveland, OH | $12,500–$27,050 per 2,000 sq ft |
| San Jose, CA | $13,450–$29,200 per 2,000 sq ft |
| Fort Lauderdale, FL | $11,100–$24,050 per 2,000 sq ft |
| Virginia Beach, VA | $11,550–$25,000 per 2,000 sq ft |
| Jacksonville, FL | $10,800–$23,450 per 2,000 sq ft |
| Providence, RI | $11,900–$25,850 per 2,000 sq ft |
| Milwaukee, WI | $12,800–$27,700 per 2,000 sq ft |
| Raleigh, NC | $12,050–$26,050 per 2,000 sq ft |
| Oklahoma City, OK | $11,050–$23,950 per 2,000 sq ft |
| West Palm Beach, FL | $10,850–$23,550 per 2,000 sq ft |
| New Orleans, LA | $11,450–$24,850 per 2,000 sq ft |
| Memphis, TN | $11,800–$25,600 per 2,000 sq ft |
| Richmond, VA | $11,900–$25,750 per 2,000 sq ft |
| Louisville, KY | $11,900–$25,850 per 2,000 sq ft |
| Salt Lake City, UT | $12,200–$26,500 per 2,000 sq ft |
| Hartford, CT | $12,800–$27,700 per 2,000 sq ft |
| Birmingham, AL | $11,350–$24,650 per 2,000 sq ft |
| Buffalo, NY | $11,900–$25,750 per 2,000 sq ft |
| Rochester, NY | $11,800–$25,600 per 2,000 sq ft |
| Grand Rapids, MI | $12,550–$27,150 per 2,000 sq ft |
| Tucson, AZ | $11,100–$24,050 per 2,000 sq ft |
| Honolulu, HI | $14,600–$31,600 per 2,000 sq ft |
| Tulsa, OK | $11,300–$24,500 per 2,000 sq ft |
| Fresno, CA | $12,100–$26,200 per 2,000 sq ft |
| Omaha, NE | $12,000–$26,000 per 2,000 sq ft |
| St. Petersburg, FL | $10,850–$23,500 per 2,000 sq ft |
| Worcester, MA | $12,150–$26,300 per 2,000 sq ft |
| Bridgeport, CT | $12,650–$27,450 per 2,000 sq ft |
| Greenville, SC | $11,500–$24,950 per 2,000 sq ft |
| Tacoma, WA | $11,900–$25,750 per 2,000 sq ft |
| Albuquerque, NM | $9,900–$21,450 per 2,000 sq ft |
| Bakersfield, CA | $11,650–$25,250 per 2,000 sq ft |
| Albany, NY | $11,750–$25,450 per 2,000 sq ft |
| Knoxville, TN | $11,350–$24,600 per 2,000 sq ft |
| McAllen, TX | $10,050–$21,800 per 2,000 sq ft |
| Baton Rouge, LA | $11,350–$24,600 per 2,000 sq ft |
| El Paso, TX | $10,300–$22,350 per 2,000 sq ft |
| Sarasota, FL | $11,200–$24,300 per 2,000 sq ft |
| New Haven, CT | $12,550–$27,150 per 2,000 sq ft |
| Columbia, SC | $11,450–$24,750 per 2,000 sq ft |
| Oxnard, CA | $11,900–$25,800 per 2,000 sq ft |
| Charleston, SC | $11,650–$25,200 per 2,000 sq ft |
| Dayton, OH | $11,650–$25,250 per 2,000 sq ft |
| Boise, ID | $12,100–$26,250 per 2,000 sq ft |
| Fort Myers, FL | $9,250–$20,050 per 2,000 sq ft |
| Stockton, CA | $12,150–$26,300 per 2,000 sq ft |
| Greensboro, NC | $11,250–$24,400 per 2,000 sq ft |
| Lakeland, FL | $11,100–$24,000 per 2,000 sq ft |
| Colorado Springs, CO | $11,400–$24,750 per 2,000 sq ft |
| Little Rock, AR | $11,000–$23,850 per 2,000 sq ft |
| Des Moines, IA | $11,650–$25,250 per 2,000 sq ft |
| Wilmington, DE | $12,550–$27,150 per 2,000 sq ft |
| Akron, OH | $11,850–$25,650 per 2,000 sq ft |
| Daytona Beach, FL | $10,450–$22,600 per 2,000 sq ft |
| Provo, UT | $11,100–$24,050 per 2,000 sq ft |
| Springfield, MA | $11,900–$25,750 per 2,000 sq ft |
| Ogden, UT | $11,450–$24,850 per 2,000 sq ft |
| Winston-Salem, NC | $11,250–$24,300 per 2,000 sq ft |
| Madison, WI | $12,400–$26,850 per 2,000 sq ft |
| Syracuse, NY | $12,050–$26,100 per 2,000 sq ft |
| Durham, NC | $11,700–$25,350 per 2,000 sq ft |
| Wichita, KS | $11,250–$24,350 per 2,000 sq ft |
| Toledo, OH | $12,350–$26,800 per 2,000 sq ft |
| Augusta, GA | $11,100–$24,050 per 2,000 sq ft |
| Palm Bay, FL | $10,400–$22,500 per 2,000 sq ft |
| Jackson, MS | $10,950–$23,750 per 2,000 sq ft |
| Harrisburg, PA | $11,500–$24,850 per 2,000 sq ft |
| Spokane, WA | $11,850–$25,650 per 2,000 sq ft |
| Chattanooga, TN | $11,250–$24,350 per 2,000 sq ft |
| Fayetteville, AR | $11,300–$24,500 per 2,000 sq ft |
| Scranton, PA | $11,550–$25,000 per 2,000 sq ft |
| Portland, ME | $11,850–$25,700 per 2,000 sq ft |
| Modesto, CA | $11,900–$25,750 per 2,000 sq ft |
| Lansing, MI | $11,300–$24,450 per 2,000 sq ft |
| Youngstown, OH | $11,400–$24,750 per 2,000 sq ft |
| Fayetteville, NC | $10,900–$23,650 per 2,000 sq ft |
| Lexington, KY | $10,950–$23,750 per 2,000 sq ft |
| Huntsville, AL | $11,150–$24,150 per 2,000 sq ft |
| Pensacola, FL | $11,000–$23,850 per 2,000 sq ft |
| Myrtle Beach, SC | $10,200–$22,050 per 2,000 sq ft |
| Mesa, AZ | $11,400–$24,700 per 2,000 sq ft |
| Reno, NV | $10,550–$22,800 per 2,000 sq ft |
| Springfield, MO | $11,250–$24,350 per 2,000 sq ft |
| Santa Rosa, CA | $12,500–$27,050 per 2,000 sq ft |
| Asheville, NC | $11,250–$24,400 per 2,000 sq ft |
| Killeen, TX | $11,050–$23,900 per 2,000 sq ft |
| Visalia, CA | $10,400–$22,550 per 2,000 sq ft |
| Lafayette, LA | $10,450–$22,700 per 2,000 sq ft |
| Long Beach, CA | $14,400–$31,150 per 2,000 sq ft |
| Santa Barbara, CA | $11,750–$25,500 per 2,000 sq ft |
| Salinas, CA | $11,900–$25,800 per 2,000 sq ft |
| Mobile, AL | $10,200–$22,100 per 2,000 sq ft |
| Corpus Christi, TX | $10,500–$22,800 per 2,000 sq ft |
| Manchester, NH | $11,950–$25,950 per 2,000 sq ft |
| Salem, OR | $11,900–$25,850 per 2,000 sq ft |
| Fort Wayne, IN | $11,500–$24,850 per 2,000 sq ft |
| Brownsville, TX | $9,900–$21,500 per 2,000 sq ft |
| Gulfport, MS | $11,100–$24,100 per 2,000 sq ft |
| Appleton, WI | $12,400–$26,850 per 2,000 sq ft |
| Savannah, GA | $11,150–$24,200 per 2,000 sq ft |
| Anchorage, AK | $12,400–$26,850 per 2,000 sq ft |
| Beaumont, TX | $11,000–$23,850 per 2,000 sq ft |
| Flint, MI | $11,000–$23,850 per 2,000 sq ft |
| Peoria, IL | $11,650–$25,250 per 2,000 sq ft |
| Canton, OH | $11,700–$25,300 per 2,000 sq ft |
| Arlington, TX | $11,000–$23,800 per 2,000 sq ft |
| Shreveport, LA | $11,150–$24,100 per 2,000 sq ft |
| Tallahassee, FL | $10,750–$23,300 per 2,000 sq ft |
| Montgomery, AL | $10,150–$22,050 per 2,000 sq ft |
| Trenton, NJ | $12,000–$26,050 per 2,000 sq ft |
| Eugene, OR | $11,500–$24,850 per 2,000 sq ft |
| Davenport, IA | $11,700–$25,350 per 2,000 sq ft |
| Ann Arbor, MI | $11,450–$24,850 per 2,000 sq ft |
| Fort Collins, CO | $11,950–$25,850 per 2,000 sq ft |
| Gainesville, FL | $11,150–$24,200 per 2,000 sq ft |
| Lincoln, NE | $11,650–$25,200 per 2,000 sq ft |
| Rockford, IL | $12,000–$25,950 per 2,000 sq ft |
| Lubbock, TX | $10,550–$22,900 per 2,000 sq ft |
| Columbus, GA | $10,700–$23,250 per 2,000 sq ft |
| Boulder, CO | $12,400–$26,800 per 2,000 sq ft |
| Green Bay, WI | $12,450–$27,000 per 2,000 sq ft |
| Evansville, IN | $11,450–$24,850 per 2,000 sq ft |
| South Bend, IN | $11,350–$24,550 per 2,000 sq ft |
| Roanoke, VA | $11,450–$24,800 per 2,000 sq ft |
| Sioux Falls, SD | $11,350–$24,650 per 2,000 sq ft |
| Wilmington, NC | $11,050–$24,000 per 2,000 sq ft |
| Stamford, CT | $12,650–$27,450 per 2,000 sq ft |
| Waco, TX | $11,250–$24,350 per 2,000 sq ft |
| Jersey City, NJ | $17,300–$37,550 per 2,000 sq ft |
| Duluth, MN | $12,550–$27,200 per 2,000 sq ft |
| Laredo, TX | $9,900–$21,450 per 2,000 sq ft |
| Cedar Rapids, IA | $11,800–$25,550 per 2,000 sq ft |
| Tuscaloosa, AL | $10,200–$22,100 per 2,000 sq ft |
| Amarillo, TX | $11,000–$23,850 per 2,000 sq ft |
| Erie, PA | $11,050–$24,000 per 2,000 sq ft |
| Atlantic City, NJ | $11,400–$24,650 per 2,000 sq ft |
| Fargo, ND | $11,800–$25,550 per 2,000 sq ft |
| Charleston, WV | $10,250–$22,250 per 2,000 sq ft |
| Norfolk, VA | $11,550–$25,000 per 2,000 sq ft |
| Macon, GA | $11,100–$24,050 per 2,000 sq ft |
| Champaign, IL | $12,150–$26,350 per 2,000 sq ft |
| Burlington, VT | $12,500–$27,050 per 2,000 sq ft |
| Topeka, KS | $11,150–$24,200 per 2,000 sq ft |
| Rochester, MN | $12,050–$26,050 per 2,000 sq ft |
| Athens, GA | $10,250–$22,200 per 2,000 sq ft |
| Las Cruces, NM | $10,650–$23,050 per 2,000 sq ft |
| Columbia, MO | $11,100–$24,000 per 2,000 sq ft |
| St. George, UT | $11,200–$24,200 per 2,000 sq ft |
| Hilo, HI | $12,150–$26,350 per 2,000 sq ft |
| Billings, MT | $11,300–$24,500 per 2,000 sq ft |
| Greenville, NC | $11,000–$23,900 per 2,000 sq ft |
| Hattiesburg, MS | $10,200–$22,100 per 2,000 sq ft |
| Santa Fe, NM | $11,150–$24,150 per 2,000 sq ft |
| Missoula, MT | $11,250–$24,450 per 2,000 sq ft |
| Cheyenne, WY | $11,300–$24,500 per 2,000 sq ft |
| Fairbanks, AK | $12,950–$28,050 per 2,000 sq ft |
Each city page has local rates by area, real-world stucco costs and a city-specific FAQ. Prices shown are the low end of the typical range, per 2,000 sq ft.
Alabama
- Birminghamfrom $11,350
- Huntsvillefrom $11,150
- Mobilefrom $10,200
- Montgomeryfrom $10,150
- Tuscaloosafrom $10,200
Arkansas
- Little Rockfrom $11,000
- Fayettevillefrom $11,300
California
- Los Angelesfrom $14,750
- San Franciscofrom $15,850
- Riversidefrom $11,350
- San Diegofrom $12,950
- Orange Countyfrom $12,050
- Oaklandfrom $13,350
- Sacramentofrom $12,750
- San Josefrom $13,450
- Fresnofrom $12,100
- Bakersfieldfrom $11,650
- Oxnardfrom $11,900
- Stocktonfrom $12,150
- Modestofrom $11,900
- Santa Rosafrom $12,500
- Visaliafrom $10,400
- Long Beachfrom $14,400
- Santa Barbarafrom $11,750
- Salinasfrom $11,900
Colorado
- Denverfrom $12,200
- Colorado Springsfrom $11,400
- Fort Collinsfrom $11,950
- Boulderfrom $12,400
Connecticut
- Hartfordfrom $12,800
- Bridgeportfrom $12,650
- New Havenfrom $12,550
- Stamfordfrom $12,650
Delaware
- Wilmingtonfrom $12,550
District of Columbia
- Washingtonfrom $13,150
Florida
- Miamifrom $11,150
- Tampafrom $10,950
- Orlandofrom $10,100
- Fort Lauderdalefrom $11,100
- Jacksonvillefrom $10,800
- West Palm Beachfrom $10,850
- St. Petersburgfrom $10,850
- Sarasotafrom $11,200
- Fort Myersfrom $9,250
- Lakelandfrom $11,100
- Daytona Beachfrom $10,450
- Palm Bayfrom $10,400
- Pensacolafrom $11,000
- Tallahasseefrom $10,750
- Gainesvillefrom $11,150
Georgia
Idaho
- Boisefrom $12,100
Indiana
- Indianapolisfrom $12,000
- Fort Waynefrom $11,500
- Evansvillefrom $11,450
- South Bendfrom $11,350
Iowa
- Des Moinesfrom $11,650
- Davenportfrom $11,700
- Cedar Rapidsfrom $11,800
Kentucky
- Louisvillefrom $11,900
- Lexingtonfrom $10,950
Louisiana
- New Orleansfrom $11,450
- Baton Rougefrom $11,350
- Lafayettefrom $10,450
- Shreveportfrom $11,150
Maine
- Portlandfrom $11,850
Maryland
- Baltimorefrom $11,400
Massachusetts
- Bostonfrom $12,050
- Worcesterfrom $12,150
- Springfieldfrom $11,900
Michigan
- Detroitfrom $12,900
- Grand Rapidsfrom $12,550
- Lansingfrom $11,300
- Flintfrom $11,000
- Ann Arborfrom $11,450
Minnesota
- Minneapolisfrom $12,300
- Duluthfrom $12,550
- Rochesterfrom $12,050
Mississippi
- Jacksonfrom $10,950
- Gulfportfrom $11,100
- Hattiesburgfrom $10,200
Missouri
- St. Louisfrom $14,150
- Kansas Cityfrom $13,000
- Springfieldfrom $11,250
- Columbiafrom $11,100
New Hampshire
- Manchesterfrom $11,950
New Jersey
- Newarkfrom $17,300
- Trentonfrom $12,000
- Jersey Cityfrom $17,300
- Atlantic Cityfrom $11,400
New Mexico
- Albuquerquefrom $9,900
- Las Crucesfrom $10,650
- Santa Fefrom $11,150
New York
North Carolina
- Charlottefrom $12,100
- Raleighfrom $12,050
- Greensborofrom $11,250
- Winston-Salemfrom $11,250
- Durhamfrom $11,700
- Fayettevillefrom $10,900
- Ashevillefrom $11,250
- Wilmingtonfrom $11,050
- Greenvillefrom $11,000
North Dakota
- Fargofrom $11,800
Ohio
- Cincinnatifrom $12,550
- Columbusfrom $12,400
- Clevelandfrom $12,500
- Daytonfrom $11,650
- Akronfrom $11,850
- Toledofrom $12,350
- Youngstownfrom $11,400
- Cantonfrom $11,700
Oklahoma
- Oklahoma Cityfrom $11,050
- Tulsafrom $11,300
Pennsylvania
- Philadelphiafrom $13,050
- Pittsburghfrom $12,400
- Harrisburgfrom $11,500
- Scrantonfrom $11,550
- Eriefrom $11,050
Rhode Island
- Providencefrom $11,900
South Carolina
- Greenvillefrom $11,500
- Columbiafrom $11,450
- Charlestonfrom $11,650
- Myrtle Beachfrom $10,200
South Dakota
- Sioux Fallsfrom $11,350
Tennessee
- Nashvillefrom $12,250
- Memphisfrom $11,800
- Knoxvillefrom $11,350
- Chattanoogafrom $11,250
Texas
- Dallasfrom $11,100
- Houstonfrom $10,950
- San Antoniofrom $11,000
- Fort Worthfrom $11,000
- Austinfrom $11,900
- McAllenfrom $10,050
- El Pasofrom $10,300
- Killeenfrom $11,050
- Corpus Christifrom $10,500
- Brownsvillefrom $9,900
- Beaumontfrom $11,000
- Arlingtonfrom $11,000
- Lubbockfrom $10,550
- Wacofrom $11,250
- Laredofrom $9,900
- Amarillofrom $11,000
Utah
- Salt Lake Cityfrom $12,200
- Provofrom $11,100
- Ogdenfrom $11,450
- St. Georgefrom $11,200
Vermont
- Burlingtonfrom $12,500
Virginia
- Virginia Beachfrom $11,550
- Richmondfrom $11,900
- Roanokefrom $11,450
- Norfolkfrom $11,550
West Virginia
- Charlestonfrom $10,250
Wyoming
- Cheyennefrom $11,300
Stucco prices, 2026
| Job | Low | Typical | High |
|---|---|---|---|
| Stucco a 2,000 sq ft home, traditional three-coat, installedper 2,000 sq ft | $12,000 | $17,000 | $26,000 |
| Stucco a 1,500 sq ft single-story home, three-coatper home | $9,000 | $12,750 | $19,500 |
| Stucco a 3,000 sq ft two-story home, three-coat, with scaffoldingper home | $19,200 | $28,500 | $45,000 |
| Traditional three-coat stucco (per sq ft of wall)per sq ft | $6 | $8.50 | $13 |
| One-coat (fiber-reinforced) stucco systemper sq ft | $5 | $7 | $10 |
| Synthetic stucco (EIFS) with foam insulation boardper sq ft | $8 | $12 | $18 |
| Acrylic finish or color coat over sound stuccoper sq ft | $1.50 | $3 | $5 |
| Re-dash or resurface existing stucco (new base and finish coat)per sq ft | $3 | $4.50 | $7 |
| Paint stucco exterior, two coatsper sq ft | $1.50 | $2.50 | $4 |
| Remove old stucco down to the sheathingper sq ft | $1.50 | $3 | $6 |
| Remove old siding before stuccoper sq ft | $1 | $1.50 | $3 |
| Lath, two layers of building paper and weep screed, installedper sq ft | $1.50 | $2.25 | $3.50 |
| Stucco over brick or concrete blockper sq ft | $5 | $7 | $10 |
| Crack repair and patching (per sq ft of repair)per sq ft | $8 | $15 | $30 |
| Small repair: hairline cracks or one hole, under 10 sq ftper job | $250 | $500 | $900 |
| Replace a damaged section, 50–200 sq ftper job | $2,500 | $4,000 | $6,000 |
| Water-damage remediation: tear off, fix sheathing, re-lath, re-stuccoper sq ft | $15 | $30 | $50 |
| Stucco moisture inspection with probe testingper inspection | $400 | $850 | $1,500 |
| Scaffolding for a two-story home (rent, set up, take down)per job | $1,200 | $3,000 | $6,000 |
| Stucco mason labor/hr | $45 | $65 | $95 |
| Venetian plaster, interior wallsper sq ft | $10 | $18 | $30 |
| Interior plaster or stucco accent wall, about 100 sq ftper wall | $1,000 | $1,800 | $3,000 |
| Building permit for new stucco or re-lath (where required)per permit | $100 | $300 | $500 |
Prices verified November 2026 · Cross-referenced against 98+ American pricing sources · See methodology
National average prices. Select a city above for location-specific pricing.
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local stucco contractors
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need a price on?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the stucco contractors who reply.
Where should they text you?
- Max 2 stucco contractors. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched stucco contractors see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 stucco contractors about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Three-Coat, One-Coat, EIFS and Finishes: Stucco Costs by System
Traditional three-coat stucco costs $6–$13 per sq ft installed. One-coat is a little less, synthetic (EIFS) more, and a re-dash or color coat over sound stucco far less. Vinyl and fiber cement are shown for comparison.
| Stucco system | Cost | Best for |
|---|---|---|
| Traditional three-coat stucco | $6–$13 per sq ft | Most homes. Scratch, brown and finish coats about 7/8 inch thick over paper and metal lath. Lasts 50 years or more and takes paint or color coat well. |
| One-coat (fiber-reinforced) system | $5–$10 per sq ft | Faster, thinner (about 3/8 to 1/2 inch) base over foam or paper, then a finish. Common on tract homes in the Southwest; less forgiving of poor flashing. |
| Synthetic stucco (EIFS) | $8–$18 per sq ft | Foam board, mesh and an acrylic finish. Best insulation and crack resistance, but repairs cost two to four times as much and it needs a drainage layer and careful flashing. |
| Acrylic finish or color coat | $1.50–$5 per sq ft | Sound stucco that just looks tired. Colored acrylic or cement finish bonded to the old surface; no repainting for 15–20 years. |
| Re-dash or resurface | $3–$7 per sq ft | Hairline-cracked or patched walls with a dry wall behind them. New base and finish coat over the old stucco, keeping the lath and paper. |
| Smooth (Santa Barbara) finish, three-coat | $7–$19 per sq ft | The high-end look, $1–$6 per sq ft more than a dash or lace texture. Slower, more skilled troweling, and it shows hairline cracks more. |
| Stucco over brick or block | $5–$10 per sq ft | Masonry homes, Florida block houses and chimneys. Often two coats bonded straight to the masonry, no lath, so it costs less per square foot. |
| Painted stucco (elastomeric or acrylic paint) | $1.50–$4 per sq ft | Refreshing color every 7–15 years. Elastomeric bridges hairline cracks; acrylic breathes better. |
| Venetian plaster (interior) | $10–$30 per sq ft | Polished interior walls and accent walls. Several thin lime or acrylic coats burnished to a marble-like sheen. |
| Vinyl siding (for comparison) | $3–$11 per sq ft | The cheapest cladding to install. Lasts 20–40 years, no painting, but it fades, cracks in hail and melts near heat. |
| Fiber cement siding (for comparison) | $7–$14 per sq ft | Wet and freeze-thaw climates where stucco struggles. A long-life cladding that needs repainting on about the same cycle as stucco. |
Which one: three-coat for most framed homes ($8.50 per sq ft typical), direct-applied stucco on block homes ($7), EIFS where insulation and crack resistance matter and the budget allows ($12). If your stucco is sound, skip all three and re-dash ($4.50) or color-coat ($3) instead.
Common Stucco Jobs and What They Cost (2026)
A whole house costs $12,000–$26,000 and takes two to three weeks with curing. Repairs and refinishes are days, not weeks.
| Block or rate | Low | Typical | High |
|---|---|---|---|
| Stucco a 2,000 sq ft single-story home, three-coat (2–3 weeks) | $12,000 | $17,000 | $26,000 |
| Stucco a 1,500 sq ft single-story home (1–2 weeks) | $9,000 | $12,750 | $19,500 |
| Stucco a 3,000 sq ft two-story home with scaffolding (3–4 weeks) | $19,200 | $28,500 | $45,000 |
| Tear off old stucco and re-stucco 2,000 sq ft (3–4 weeks) | $15,000 | $23,000 | $38,000 |
| Synthetic stucco (EIFS) on a 2,000 sq ft home (2–3 weeks) | $16,000 | $24,000 | $36,000 |
| Stucco one 300 sq ft garage wall (2–4 days) | $1,800 | $2,550 | $3,900 |
| Patch a hole or small cracked area (half a day) | $250 | $500 | $900 |
| Replace a 50–200 sq ft damaged section (2–3 days) | $2,500 | $4,000 | $6,000 |
| Remediate one water-damaged area (3–5 days) | $1,000 | $2,000 | $3,000 |
| Re-dash a 2,000 sq ft home (3–5 days) | $6,000 | $9,000 | $14,000 |
| Acrylic color coat on a 2,000 sq ft home (2–4 days) | $3,000 | $6,000 | $10,000 |
| Paint a 2,000 sq ft stucco home, two coats (3–5 days) | $3,000 | $5,000 | $8,000 |
| Moisture inspection with probes (2–4 hours) | $400 | $850 | $1,500 |
| Venetian plaster accent wall, about 100 sq ft (1–2 days) | $1,000 | $1,800 | $3,000 |
What moves these prices: the system, the wall area and number of stories, what is under the old finish, the texture, and your city's labor rates. Scaffolding on a two-story home adds about $3,000 at the typical price.
Traditional Stucco vs Synthetic (EIFS) vs Fiber Cement Siding
Three-coat stucco at $8.50 per sq ft typical suits most homes. EIFS at $12 insulates best; fiber cement at $10 is the safer pick in wet, freeze-thaw climates.
| Factor | Traditional three-coat stucco | Synthetic stucco (EIFS) | Fiber cement siding |
|---|---|---|---|
| Installed price per sq ft | $6–$13 | $8–$18 | $7–$14 |
| 2,000 sq ft home | $12,000–$26,000 | $16,000–$36,000 | $14,000–$28,000 |
| Lifespan | 50–100 years | Decades if the drainage layer and flashing are right; 1990s barrier systems failed early | Long-life; makers back it with multi-decade warranties |
| Upkeep | Paint every 7–15 years or color coat every 15–20; seal cracks | Wash; recoat finish every 15–20 years | Repaint every 7–15 years; re-caulk joints |
| Repair cost | $8–$30 per sq ft for cracks | $30–$50 per sq ft | Replace planks; moderate |
| Best when | Dry and mild climates; block homes; matching the neighborhood | New builds wanting insulation; crack-prone soils | Wet or freeze-thaw climates; wood-sided neighborhoods |
| Watch out for | Missing weep screed or second paper layer; painting too soon | Barrier EIFS with no drainage; insurer questions; costly repairs | Unpainted cut edges; cheap installers skipping flashing |
Removal is the swing cost when you switch: $1–$3 per sq ft to strip siding before stucco, $1.50–$6 to strip stucco before siding. The guides we checked put stucco's resale return near 70%, in the same band as siding replacement.
Stucco Upkeep Costs Per Year
A stucco home costs about $1,400 a year to keep up when you spread painting, crack repairs and an occasional inspection over their life. Low = colored finish and a dry climate; high = painted stucco in a wet one.
| Per year | Low | Typical | High |
|---|---|---|---|
| Wash, caulk check and sealing small cracks | $200 | $350 | $500 |
| Repainting spread over its 7–15-year life (2,000 sq ft) | $200 | $500 | $1,150 |
| Crack and patch repairs (one small job every 3–5 years) | $50 | $125 | $300 |
| Moisture inspection (every 1–3 years in wet climates) | $135 | $425 | $1,500 |
| All-in upkeep per year | $585 | $1,400 | $3,450 |
Repaint cost per year = a 2,000 sq ft paint job at $3,000, $5,000 and $8,000 divided by 15, 10 and 7 years. An acrylic color coat ($6,000 typical) lasts 15–20 years and cuts the painting line to near zero.
What affects stucco costs
System
Three-coat stucco costs $6–$13 per sq ft; one-coat $5–$10; synthetic (EIFS) $8–$18. Over brick or block, $5–$10.
Wall area and stories
A 1,500 sq ft single-story home is $9,000–$19,500; a 3,000 sq ft two-story home $19,200–$45,000 with scaffolding ($1,200–$6,000).
What is under the old stucco
Re-dash over sound stucco $3–$7 per sq ft; tear-off $1.50–$6; water-damage remediation $15–$50. The wall decides the quote.
Finish and color
Dash, lace and sand are standard. Smooth finishes add $1–$6 per sq ft. Integral color or a color coat ($1.50–$5) saves a $1.50–$4-per-sq-ft paint job.
Your city
Labor drives the gap. New York ($30,800 typical) sits at the top and Fort Myers ($13,100) at the bottom, against the US typical of $17,000.
Season
Cement coats need 40–90°F and two days of misting; crews in cold states work spring to fall and many price the slow months lower.
How to save on stucco
- Re-dash instead of re-stucco.On a dry, solid wall a new finish coat at $3–$7 per sq ft ($9,000 on 2,000 sq ft) costs far less than a full $17,000 system.
- Color the finish coat.Integral color or an acrylic color coat ($1.50–$5 per sq ft) means no $5,000 paint job now and none for 15–20 years.
- Insist on measured wall area.Quotes off floor area plus 10–15% overcharge tall, narrow homes. Have the walls measured, windows and doors taken out.
- Bundle repairs with the big job.A crew already on site patches cracks for far less than a separate $250–$900 call.
- Book the slow season.Spring and fall cure best; many crews quote lower in late fall and winter in mild climates.
- Inspect before you buy or sell.A $400–$1,500 inspection catches hidden water damage before it becomes $15–$50-per-sq-ft remediation.
Get two real quotes
Local stucco contractors · free · max 2 will contact you · no spam.
Stucco Cost by Home Size
1,500 sq ft single-story: $9,000–$19,500. 2,000 sq ft: $12,000–$26,000. 3,000 sq ft two-story with scaffolding: $19,200–$45,000. All traditional three-coat, installed, at $6–$13 per sq ft of wall.
Worked example: a 2,000 sq ft single-story home with sound but tired stucco. A re-dash at $9,000 plus a few crack repairs at $500 comes to about $9,500, with no paint needed if the finish is colored.
The same house with failed paper under two walls: remediating 300 sq ft at $9,000 plus a re-dash of the rest ($7,650) is about $16,650. Tearing everything off and starting again would be $23,000, so a good inspection first ($400–$1,500) pays for itself.
What a stucco quote should include
A real stucco quote answers all of these. If it answers fewer than six, ask before you agree to the work.
- The wall area measured on site, in square feet, with windows and doors taken out
- The system: three-coat, one-coat or EIFS, and the finished thickness
- Paper (two layers over wood sheathing), lath type, weep screed and corner beads
- Flashing and kickouts at windows, doors and roof-to-wall joints
- The finish texture and how it is colored: integral, color coat or paint
- Scaffolding, tear-off and disposal as separate lines
- Who pulls the permit and schedules the lath inspection
- Curing: misting after the brown coat and the wait before the finish
- Warranty on cracking and water intrusion, in years
Who can stucco your house, and what the permit costs
New stucco and re-lathing need a building permit in most cities ($100–$500); patching and finish coats usually do not. Who may do the work depends on the state.
| State | Who may do the work | Permit (typical fee) | Watch for |
|---|---|---|---|
| California | CSLB-licensed contractor (C-35 lathing and plastering) for any job of $1,000 or more, labor and materials | Yes for new stucco and re-lath; LADBS express permits in Los Angeles | Down payment capped at $1,000 or 10%; pre-1978 homes need lead-safe work |
| Arizona | Registrar of Contractors license for work over $1,000 or any permitted job | City permit for new stucco; not for patching | Check the ROC number and bond on the quote |
| Nevada | State Contractors Board license, C-17 lathing and plastering (C-17e stucco and cement coatings) | Yes for new stucco or re-lath | Unlicensed work has no board recourse |
| Texas | No state license for stucco; cities and HOAs set the rules | Varies by city; Dallas quotes $150–$2,000 by valuation | Ask for insurance certificates since the state does not check |
| Florida | No state stucco or plastering license, and since July 1, 2023 counties and cities may not require their own | County or city permit; Orlando charges $64.94 plus $4.32 per $1,000 of value | Check insurance and references yourself; block homes get direct-applied stucco, no lath |
| New Jersey, Pennsylvania | State-registered home improvement contractor: NJ registration ($110, $500,000 liability cover), PA registration for anyone doing $5,000+ a year | Local permit; $100–$500 is typical | 1990s–2000s homes have a water-damage record; buyers order inspections |
| Illinois, Georgia, Massachusetts | Local licensing or state registration; no stucco-specific license | Chicago from $350; Atlanta $150 + $25 + $7 per $1,000; Boston $10 per $1,000 + $20 | Replacing like-for-like stucco often skips the permit; new lath does not |
Fees are the cities' published schedules and the 2026 cost guides we checked; confirm with your building department before work starts.
The contractor pulls the permit and schedules the lath inspection, which happens after paper, lath and weep screed are up and before the scratch coat. That inspection is your best protection: it checks the two layers of paper, the flashing and the fasteners you will never see again. If a bidder suggests skipping the permit on a re-lath job, that is a reason to pick someone else.
Licensing does not set the price, but it sets what happens when something fails. In license states such as California, Arizona and Nevada you can file a complaint with the board and often recover from a bond. In Texas, Florida and most of the Midwest you rely on the contract, the insurance certificate and the warranty, so get all three in writing. On any home built before 1978, a crew that disturbs old paint must be EPA lead-safe certified, which adds a containment line to the quote.
What the building code requires, and what a cheap quote leaves out
A code-right three-coat wall costs $6–$13 per sq ft. Quotes well under that usually drop one of the items below, and every one of them is a leak or a crack waiting to happen.
The paper and lath package runs about $1.50–$3.50 per sq ft installed, which is why a bid that is $2 per sq ft under everyone else has often cut it. Ask to see the paper and lath spec and the weep screed on the quote, and ask who does the lath inspection.
Over an existing finish, the code question is simpler: a re-dash or color coat needs a sound, clean, dry base. If the old stucco is hollow, wet or over failed paper, no finish coat fixes it; that wall comes off ($1.50–$6 per sq ft) and gets rebuilt to code.
- Two layers of water-resistive barrier over wood-based sheathing (Grade D paper or an approved wrap plus a second layer), lapped shingle-style
- Metal lath fastened through to the framing, furred off the wall so the scratch coat keys behind it
- Weep screed at the bottom of every wall, at least 4 inches above grade or 2 inches above paving, so water drains out
- Kickout and head flashing at roof-to-wall joints, windows and doors, lapped into the paper
- Control joints on big walls, placed to the lath standard, so shrinkage cracks happen where you want them
- Three coats about 7/8 inch thick, with the brown coat misted for 48 hours and about a week before the finish; one-coat systems need the manufacturer's listed thickness
- Weather: no cement coats below 40°F, and each coat kept from freezing for 24 hours after it sets; above 90°F the wall needs shade and misting. Winter work in cold states adds tenting and heaters
Local amendments vary: Florida's code builds its stucco rules on ASTM C926 and C1063 and allows direct application to concrete block; some California fire-zone rules call for a noncombustible lower wall; Minnesota rewrote its stucco section after its failures (two layers of paper, a weep screed 4 inches above grade, each coat kept moist 48 hours). Your permit office has the local list.
What moved stucco prices in 2025 and 2026
Labor, not materials, drives stucco. Plasterer pay rose about 2.9% in the latest federal wage survey, and that is the number we carry into 2026. Materials moved less, with two exceptions worth knowing.
Metal. The federal tariff on imported steel and aluminum doubled to 50% in June 2025. Metal lath, weep screed, corner beads, control joints and fasteners are all steel or aluminum, so the lath package ($1.50–$3.50 per sq ft installed) moved up, even though it is a small share of the wall.
Cement and sand. The US mill price of cement rose from $127 a ton in 2021 to $160 in 2024 and held at $160 in 2025, so the cement in a wall stopped getting dearer last year. Cement, sand and lime are still only $2–$4 per sq ft of a $6–$13 wall; an 80-lb bag of base coat covers about 20–24 sq ft at 3/8 inch. Acrylic finishes and EIFS foam follow oil and resin prices and moved more than cement.
What it means for your quote. Expect 2026 quotes about 2.9% above 2025 for the same wall, more in metros where crews are short. Prices here are from November 2026; a quote from last year can be honored only if the contractor already bought the material.
No federal tax credit applies to stucco, paint or color coats. Some utilities pay insulation rebates on EIFS or foam retrofits; ask your utility and keep the product data sheet.
Stucco inspections, insurance and the homes that fail
A stucco moisture inspection costs $400–$1,500, and in the Northeast and Minnesota it is now a normal step in buying or selling a stucco home. Here is why, and what insurance does and does not cover.
Thousands of homes built from the mid-1990s to about 2010 in southeastern Pennsylvania, New Jersey, Delaware and the Twin Cities were stuccoed over wood sheathing with missing kickout flashing, poorly lapped paper and no weep screed. Water ran behind the stucco for years. Remediation on those homes runs $15–$50 per sq ft, and whole-house jobs above $100,000 are common enough that buyers' agents write stucco contingencies into offers: in June 2025 a Chester County, Pennsylvania jury awarded three families $3.25 million over stucco water damage in homes that each needed $100,000–$150,000 of repairs.
The inspection is a visual survey plus moisture probes drilled through the stucco at windows, roof lines and the base of walls, patched afterward, with a report of readings. A Minnesota inspection firm charges $845 for a whole house up to 3,000 sq ft and $545 for a single wall; New Jersey inspectors charge $495–$1,595 by home size. A $400–$1,500 inspection that finds a problem is the cheapest money you will spend on the house; one that finds nothing is a document you keep for the next buyer.
Homeowners insurance treats stucco like any other cladding: it pays for sudden, accidental damage such as hail, wind-blown debris or a fallen limb, and excludes slow leaks, poor workmanship, rot and mold that developed over time. Some insurers refuse homes with synthetic stucco (EIFS) or cover only drainable EIFS after a moisture test. Gradual water damage behind stucco is usually not covered, so the fix comes out of pocket or from the builder, if the warranty is still alive.
- Buying a stucco home built 1995–2010 in PA, NJ, DE, MD or MN: order the inspection and make the offer contingent on it
- Selling one: inspect first, fix what shows, and hand the report to buyers
- Any stucco home: keep soil and mulch below the weep screed, point sprinklers away, and seal cracks at windows every year
- After hail or storm damage: photograph it the same day and call the insurer before any repair
Stucco cost: FAQ
How much does it cost to stucco a house?
$12,000–$26,000 for a 2,000 sq ft home with a traditional three-coat system, labor and materials, with $17,000 typical in 2026. That is $6–$13 per square foot of wall.
How much is stucco per square foot?
$6–$13 installed for three-coat stucco; one-coat $5–$10; synthetic (EIFS) $8–$18; over brick or block $5–$10. Materials alone are $2–$4.
How much does stucco repair cost?
$250–$900 for a small patch of cracks or one hole, about $500 typical. Cracks run $8–$30 per sq ft, a 50–200 sq ft section $2,500–$6,000, and water-damage remediation $15–$50 per sq ft.
How much does it cost to re-stucco a house?
$6,000–$14,000 to re-dash a 2,000 sq ft home over sound stucco ($3–$7 per sq ft). Tear-off and a full three-coat system is $15,000–$38,000.
How much does it cost to paint a stucco house?
$3,000–$8,000 for a 2,000 sq ft home, or $1.50–$4 per sq ft, two coats. An acrylic color coat ($1.50–$5 per sq ft) skips repainting for 15–20 years.
Is stucco cheaper than siding?
Vinyl siding is cheaper to install ($3–$11 per sq ft against $6–$13 for stucco). Fiber cement ($7–$14) is in the same band as stucco. Stucco lasts 50+ years to vinyl's 20–40.
How long does stucco last?
50–100 years when it is installed to code and kept sealed. Paint lasts 7–15 years, a color coat 15–20.
Do I need a permit to stucco my house?
Usually for new stucco and re-lathing, not for patching or a finish coat. Permits run $100–$500 and include a lath inspection in most cities. Your contractor should pull it.
Why does stucco cost more in some cities?
Labor. Materials cost about the same everywhere; plasterers in high-wage metros charge more per square foot. New York is the priciest city in this guide at $30,800 typical, Fort Myers the cheapest at $13,100.
What's the average cost to stucco a house in 2026?
From the cost guides and price data we checked, the national typical is $17,000 for a 2,000 sq ft home, an estimated 2.9% above 2025, in line with plasterers' pay.
Done your research?
Pick your city for local prices, or get two real stucco quotes now. Free, no spam.