How much does stucco cost in Flint?
By Our research team · Last verified · Methodology
Stuccoing a 2,000 sq ft home in Flint costs $11,000–$23,850 installed, three coats over paper and lath. Most homeowners here pay about $15,600. A small crack or hole repair is $230–$830; painting the whole house $3,000–$7,500.
How we get this data- Typical
- $15,600
- Low end
- $7,350
- High end
- $34,800
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local stucco contractors send you a real quote. Free, no obligation.
Get my fair quote →The typical Flint price is $15,600, 8% below the US typical of $17,000.
Flint's price band
Flint is cheaper than 79% of the 195 US metros we price for stucco work.
Stuccoing a 2,000 sq ft home in Flint costs $11,000–$23,850, and $15,600 is what most homeowners pay for a three-coat system. Repairs are the most common call: $230–$830 for a small patch, $2,300–$5,550 to replace a 50–200 sq ft section. Painting the whole house runs $3,000–$7,500.
Flint is a smaller market. A three-coat job here is about 8% below the US typical of $17,000 for a 2,000 sq ft home, and most of the gap is labor: cement, sand, lath and paper cost about the same everywhere.
Freeze-thaw winters crack stucco, so Flint crews work roughly April through November. Cement coats can't go on below 40°F and must be kept from freezing for 24 hours, so winter work means tenting and heaters, and most companies quote it higher or not at all.
Comparing cities, or after the US-wide picture? See the national guide: Stucco cost in the USA.
$11,000–$23,850 to stucco a 2,000 sq ft home in Flint with a traditional three-coat system, labor and materials — typically $15,600. That works out to $5.50–$12 per sq ft; a small repair is $230–$830 and painting $1.50–$3.75 per sq ft. Verified November 2026. Get free Flint quotes →
- Stucco a 2,000 sq ft home: $11,000–$23,850 ($15,600 typical)
- Three-coat $5.50–$12 per sq ft; one-coat $4.50–$9.25; EIFS $7.50–$17
- Small repair $230–$830; re-dash $2.75–$6.50 per sq ft; remediation $14–$46
- Paint $1.50–$3.75 per sq ft; color coat $1.50–$4.50; inspection $375–$1,400
- Priciest area to work in: Downtown Flint & Carriage Town; lowest quotes: Grand Blanc, Flushing & Fenton
Prices verified November 2026 · Cross-referenced against 98+ American pricing sources · See methodology
Installed prices with labor and materials; whole-home rows assume about 2,000 sq ft of wall for a 2,000 sq ft home. Flint metro, re-verified November 2026.
| Service | Low | Typical | High |
|---|---|---|---|
| Stucco a 2,000 sq ft home, traditional three-coat, installedper 2,000 sq ft | $11,000per 2,000 sq ft | $15,600 | $23,850 |
| Stucco a 1,500 sq ft single-story home, three-coatper home | $8,250per home | $11,700 | $17,850 |
| Stucco a 3,000 sq ft two-story home, three-coat, with scaffoldingper home | $17,600per home | $26,100 | $41,250 |
| Traditional three-coat stucco (per sq ft of wall)per sq ft | $5.50per sq ft | $7.75 | $12 |
| One-coat (fiber-reinforced) stucco systemper sq ft | $4.50per sq ft | $6.50 | $9.25 |
| Synthetic stucco (EIFS) with foam insulation boardper sq ft | $7.50per sq ft | $11 | $17 |
| Acrylic finish or color coat over sound stuccoper sq ft | $1.50per sq ft | $2.75 | $4.50 |
| Re-dash or resurface existing stucco (new base and finish coat)per sq ft | $2.75per sq ft | $4.25 | $6.50 |
| Paint stucco exterior, two coatsper sq ft | $1.50per sq ft | $2.25 | $3.75 |
| Remove old stucco down to the sheathingper sq ft | $1.50per sq ft | $2.75 | $5.50 |
| Remove old siding before stuccoper sq ft | $1per sq ft | $1.50 | $2.75 |
| Lath, two layers of building paper and weep screed, installedper sq ft | $1.50per sq ft | $2 | $3.25 |
| Stucco over brick or concrete blockper sq ft | $4.50per sq ft | $6.50 | $9.25 |
| Crack repair and patching (per sq ft of repair)per sq ft | $7.50per sq ft | $14 | $28 |
| Small repair: hairline cracks or one hole, under 10 sq ftper job | $230per job | $460 | $830 |
| Replace a damaged section, 50–200 sq ftper job | $2,300per job | $3,700 | $5,550 |
| Water-damage remediation: tear off, fix sheathing, re-lath, re-stuccoper sq ft | $14per sq ft | $28 | $46 |
| Stucco moisture inspection with probe testingper inspection | $375per inspection | $795 | $1,400 |
| Scaffolding for a two-story home (rent, set up, take down)per job | $1,150per job | $2,850 | $5,700 |
| Stucco mason labor/hr | $40/hr | $60 | $85 |
| Venetian plaster, interior wallsper sq ft | $9.25per sq ft | $16.50 | $28 |
| Interior plaster or stucco accent wall, about 100 sq ftper wall | $925per wall | $1,650 | $2,750 |
| Building permit for new stucco or re-lath (where required)per permit | $95per permit | $290 | $485 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local stucco contractors in Flint
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need a price on?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the stucco contractors who reply.
Where should they text you?
- Max 2 stucco contractors. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched stucco contractors see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 stucco contractors about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Prices verified November 2026 · Cross-referenced against 98+ American pricing sources · See methodology
Prices cover the Flint metro. Outlying towns can run 5–10% lower; older homes in Downtown Flint & Carriage Town sit at the top of each range.
Stucco prices across Flint
Where you live in the metro changes the labor and the access, not the materials. Older homes in Downtown Flint & Carriage Town take the longest; jobs in Grand Blanc, Flushing & Fenton tend to come in at or under the city typical.
Downtown Flint & Carriage Town
- Three-coat, 2,000 sq ft
- $11,900–$26,700 per 2,000 sq ft
- Small repair
- $420–$590 / small repair
The priciest part of the metro for exterior work: narrow side yards, permit parking and historic-review streets add days. Expect quotes at the top of each range.
North Flint & Civic Park
- Three-coat, 2,000 sq ft
- $11,350–$25,300 per 2,000 sq ft
- Small repair
- $405–$560 / small repair
A mix of older homes and new infill. Older stucco here often hides failed paper or rusted lath, so a repair quote can grow once the crew opens a wall.
East Side & Eastern Flint
- Three-coat, 2,000 sq ft
- $11,000–$23,850 per 2,000 sq ft
- Small repair
- $390–$530 / small repair
Standard pricing for standard jobs. Driveway access and open side yards keep setup time short.
Grand Blanc, Flushing & Fenton
- Three-coat, 2,000 sq ft
- $11,000–$25,050 per 2,000 sq ft
- Small repair
- $390–$555 / small repair
Two-story homes are the norm here. Expect standard per-square-foot rates, but more square feet and a scaffolding line on the quote.
Real-World Stucco Costs in Flint
Here's what common stucco jobs cost in Flint in 2026, labor, paper, lath and three coats on a 2,000 sq ft home.
Stucco a 2,000 sq ft single-story home, three-coat — 2–3 weeks
Paper and lath, then scratch, brown and finish coats with a lace or sand texture. Most Flint jobs land here; a smooth finish or lots of windows and corners can reach $23,850.
Patch a hole and a few cracks — half a day
Cut back loose stucco, patch the paper, re-mesh and float in a matching texture. One hole alone is $230–$415; cracks run $7.50–$28 per sq ft of repair. Expect a visible patch until the wall is painted or color-coated.
Re-dash a tired but dry 2,000 sq ft house — 3–5 days
A bonding coat and new finish over the old stucco, keeping the lath and paper. At $2.75–$6.50 per sq ft it is the cheapest way to make old stucco look new. An acrylic color coat instead runs $3,000–$9,000.
Water damage under a window, 100 sq ft remediated
Tear off the stucco, replace rotted sheathing, new paper, flashing and lath, then three coats. $14–$46 per sq ft; a moisture inspection first ($375–$1,400) tells you how far it has spread.
Tear off and re-stucco a 2,000 sq ft home — 3–4 weeks
Removal ($1.50–$5.50 per sq ft) plus a full three-coat system. Only worth it when the paper or lath has failed across the house; a two-story home adds scaffolding at $1,150–$5,700.
How much does stucco cost in Flint?
A three-coat stucco job on a 2,000 sq ft Flint home costs $11,000 to $23,850. The middle of the market, about $15,600, buys scratch, brown and finish coats over new paper and lath with a standard texture. Smooth finishes and two-story scaffolding cost more.
Water damage changes the math: remediation runs $14–$46 per sq ft because the crew tears off stucco, repairs sheathing and re-laths before any stucco goes on. Re-checked against 98 sources in November 2026.
Stucco prices in Flint (2026): per square foot and per home
Three-coat stucco costs $5.50–$12 per sq ft installed, a re-dash $2.75–$6.50, and painting $1.50–$3.75. Whole-home figures below are for about 2,000 sq ft of wall.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Traditional three-coat stucco (per sq ft of wall) | $5.50 | $7.75 | $12 |
| One-coat (fiber-reinforced) stucco system (per sq ft) | $4.50 | $6.50 | $9.25 |
| Synthetic stucco (EIFS) with foam insulation board (per sq ft) | $7.50 | $11 | $17 |
| Re-dash existing stucco, per sq ft | $2.75 | $4.25 | $6.50 |
| Acrylic color coat, per sq ft | $1.50 | $2.75 | $4.50 |
| Paint a 2,000 sq ft stucco home | $3,000 | $4,500 | $7,500 |
| Small repair: hairline cracks or one hole, under 10 sq ft | $230 | $460 | $830 |
| Remediate water damage, per sq ft | $14 | $28 | $46 |
The material is the cheap bit. Cement, sand, paper and lath for a 2,000 sq ft home run $4,000–$8,000; the Flint price of $11,000–$23,850 is mostly skilled hands, time between coats and scaffolding.
What moves a stucco quote in Flint:
- System — three-coat $5.50–$12 per sq ft; one-coat $4.50–$9.25; synthetic (EIFS) $7.50–$17.
- Stories and access — a two-story home adds scaffolding at $1,150–$5,700 and slower work at height.
- What is under the old stucco — tear-off ($1.50–$5.50 per sq ft) and water-damage remediation ($14–$46) are where quotes grow.
- Finish — smooth (Santa Barbara) finishes add $1–$6 per sq ft over a lace or dash texture.
- Painting or color coat — $1.50–$3.75 per sq ft to paint; $1.50–$4.50 for an acrylic color coat that needs no paint for years.
Ask every Flint bidder for the same six things: the measured wall area, the system (three-coat, one-coat or EIFS) and its thickness, the paper and lath spec, how the finish coat is colored, scaffolding and permit as separate lines, and the warranty. Compare those, not the headline price. Get a quote for your stucco job →
Stucco Cost in Flint by Home Size
1,500 sq ft single-story: $8,250–$17,850. 2,000 sq ft: $11,000–$23,850. 3,000 sq ft two-story, scaffolding included: $17,600–$41,250. All three-coat, installed.
Worked example: a Flint 2,000 sq ft single-story home with sound stucco that looks tired. A re-dash at $8,500 plus a few crack repairs at $460 comes to about $8,960, with no paint needed if the finish is colored.
The same house with failed paper under two walls: remediating 300 sq ft at $8,400 plus a re-dash of the rest to blend the look ($7,250) is about $15,650. Tearing everything off and starting again would be $21,100.
Flint Stucco Costs by System and Finish
| Stucco system | Cost | Best for |
|---|---|---|
| Traditional three-coat stucco | $5.50–$12 per sq ft | Most homes. Scratch, brown and finish coats about 7/8 inch thick over paper and metal lath. Lasts 50 years or more and takes paint or color coat well. |
| One-coat (fiber-reinforced) system | $4.50–$9.25 per sq ft | Faster, thinner (about 3/8 to 1/2 inch) base over foam or paper, then a finish. Common on tract homes in the Southwest; less forgiving of poor flashing. |
| Synthetic stucco (EIFS) | $7.50–$17 per sq ft | Foam board, mesh and an acrylic finish. Best insulation and crack resistance, but repairs cost two to four times as much and it needs a drainage layer and careful flashing. |
| Acrylic finish or color coat | $1.50–$4.50 per sq ft | Sound stucco that just looks tired. Colored acrylic or cement finish bonded to the old surface; no repainting for 15–20 years. |
| Re-dash or resurface | $2.75–$6.50 per sq ft | Hairline-cracked or patched walls with a dry wall behind them. New base and finish coat over the old stucco, keeping the lath and paper. |
| Smooth (Santa Barbara) finish, three-coat | $6.50–$18 per sq ft | The high-end look, $1–$6 per sq ft more than a dash or lace texture. Slower, more skilled troweling, and it shows hairline cracks more. |
| Stucco over brick or block | $4.50–$9.25 per sq ft | Masonry homes, Florida block houses and chimneys. Often two coats bonded straight to the masonry, no lath, so it costs less per square foot. |
| Painted stucco (elastomeric or acrylic paint) | $1.50–$3.75 per sq ft | Refreshing color every 7–15 years. Elastomeric bridges hairline cracks; acrylic breathes better. |
| Venetian plaster (interior) | $9.25–$28 per sq ft | Polished interior walls and accent walls. Several thin lime or acrylic coats burnished to a marble-like sheen. |
| Vinyl siding (for comparison) | $2.75–$10.50 per sq ft | The cheapest cladding to install. Lasts 20–40 years, no painting, but it fades, cracks in hail and melts near heat. |
| Fiber cement siding (for comparison) | $6.75–$13.50 per sq ft | Wet and freeze-thaw climates where stucco struggles. A long-life cladding that needs repainting on about the same cycle as stucco. |
Material cost vs. what you pay — the Flint stucco bill
Cement, sand, lath and paper for a 2,000 sq ft home cost about $4,000–$8,000, and a bag of base coat is under $30. The installed price in Flint, $11,000–$23,850, pays for a crew of plasterers for one to three weeks, three separate coats with curing time between them, scaffolding, cleanup and a warranty on the work.
Labor is the part that moves with the city. Flint is a smaller market, so a three-coat job here is about 8% below the US typical of $17,000. Stucco crews bill $40–$85 an hour when they bill by the hour, but almost every whole-house job is quoted by the square foot of wall.
What's included in a Flint stucco quote (and what costs extra)
A standard three-coat price covers paper, lath, weep screed, corner beads, the three coats, a standard texture and cleanup. The headline price often leaves out:
- Scaffolding — $1,150–$5,700 on a two-story home, often a separate line
- Tear-off of old stucco or siding — $1.50–$5.50 per sq ft for stucco, $1–$2.75 for siding, plus disposal
- Painting or color coat — $1.50–$3.75 per sq ft to paint; $1.50–$4.50 for an acrylic color coat
- Permit and inspection — $95–$485 where the city requires one for new stucco or re-lathing
Ask how long the warranty on the work lasts and whether it covers cracking; good companies put it in writing.
Three-coat, one-coat or synthetic
Three-coat stucco costs $5.50–$12 per sq ft in Flint; a one-coat system $4.50–$9.25; synthetic stucco (EIFS) $7.50–$17. EIFS insulates best but costs the most to repair.
Wall area, not floor area
A 2,000 sq ft single-story home has roughly 2,000 sq ft of wall; a two-story home of the same floor area has far more. The 1,500 sq ft home in the table runs $8,250–$17,850; a 3,000 sq ft two-story home $17,600–$41,250 with scaffolding.
What is behind the old stucco
A re-dash over sound stucco is $2.75–$6.50 per sq ft. If the paper or lath has failed, tear-off ($1.50–$5.50) and remediation ($14–$46 per sq ft) apply, and the quote can double.
Texture choice
Dash, lace and sand finishes are the standard price. A smooth Santa Barbara finish adds $1–$6 per sq ft and shows hairline cracks more. Integral color in the finish coat saves the $1.50–$3.75 per sq ft paint job.
Local rules
Freeze-thaw winters are hard on stucco. In Flint, a sound weep screed, kickout flashing at roof-to-wall joints and sealed cracks matter more than anywhere; cement coats can't go on below 40°F and must be kept from freezing for 24 hours after they set, so winter work means tenting and heaters, which adds cost.
Labor rates in Flint
Labor is most of the bill. Flint is a smaller market, so a three-coat job is about 8% below the US typical of $17,000. Crews bill about $40–$85 an hour; a whole house is quoted by the square foot.
Season and weather
Cement coats need 40–90°F and 48 hours of misting after the brown coat, then about a week before the finish. Rain, frost or desert heat stretch a Flint job, and many crews offer better prices in their slow months.
- Re-dash instead of re-stucco.If the wall behind is dry, a new finish coat at $2.75–$6.50 per sq ft ($8,500 on 2,000 sq ft) costs far less than a full $15,600 three-coat job.
- Color the finish coat.Integral color or an acrylic color coat ($1.50–$4.50 per sq ft) means no $3,000–$7,500 paint job now and none for 15–20 years.
- Get the wall measured.Quotes should be per square foot of wall, measured on site, minus windows and doors. A quote off the home's floor area can be 10–30% high.
- Bundle the small jobs.A crew already on site patches cracks for far less than a separate $230–$830 call. Have every wall checked while the scaffolding is up.
- Book the slow season.Crews in Flint quote lower when their calendar is thin. Spring and fall give the best curing weather; ask about off-peak dates.
- Inspect before you buy or sell.A $375–$1,400 moisture inspection finds hidden water damage before it becomes $14–$46-per-sq-ft remediation. Worth it on any stucco home built in the 1990s or 2000s.
Flint stucco companies often quote off a quick walk-around. Before you agree to the work, get these in writing:
- The wall area measured on site, in square feet, with windows and doors taken out
- The system: three-coat, one-coat or EIFS, and the finished thickness
- Paper (two layers over wood sheathing), lath type, weep screed and corner beads
- Flashing and kickouts at windows, doors and roof-to-wall joints
- The finish texture and how it is colored: integral, color coat or paint
- Scaffolding, tear-off, disposal and permit as separate lines
- Curing: misting after the brown coat and the wait before the finish
- Warranty on cracking and water intrusion, in years
How much does it cost to stucco a house in Flint?
$11,000–$23,850 for a 2,000 sq ft home with a traditional three-coat system, labor and materials, and $15,600 is typical. That is $5.50–$12 per sq ft of wall.
How much is stucco per square foot in Flint?
$5.50–$12 per sq ft installed for three-coat stucco, $4.50–$9.25 for a one-coat system and $7.50–$17 for synthetic stucco (EIFS). A re-dash over sound stucco is $2.75–$6.50.
How much does stucco repair cost in Flint?
$230–$830 for a small patch of cracks or one hole, about $460 typical. Replacing a 50–200 sq ft section is $2,300–$5,550; water-damage remediation $14–$46 per sq ft.
How much does it cost to paint a stucco house in Flint?
$3,000–$7,500 for a 2,000 sq ft home, or $1.50–$3.75 per sq ft, two coats. An acrylic color coat instead runs $3,000–$9,000 and skips repainting for 15–20 years.
Can I stucco my house myself?
The materials are cheap ($4–$8 per sq ft with paper and lath) but three-coat stucco is a skilled, timed job: each coat has to go on wet-edge to wet-edge in one go and cure right. Most DIY jobs crack. Patching a small hole is a fair DIY task; a wall is not.
How much does it cost to re-stucco a house in Flint?
$5,500–$13,000 to re-dash a 2,000 sq ft home over sound stucco. Tearing the old stucco off first and doing a full three-coat job is $14,000–$34,850.
Do I need a permit for stucco in Flint?
Usually for new stucco or re-lathing, not for patching or a finish coat. Permits run about $95–$485; your contractor should pull it. Check with the city building department before work starts.
Should I repair or replace my stucco?
Repair it if the wall behind is dry: patches are $230–$830 and a re-dash $2.75–$6.50 per sq ft. Replace it when the paper or lath has failed, the stucco is hollow over large areas, or more than a quarter of a wall is damaged. Full replacement is $11,000–$23,850.
How long does stucco last?
50–100 years when installed right and kept sealed. Paint lasts 7–15 years; an acrylic color coat 15–20. Hairline cracks are normal; cracks you can fit a dime in need a look.
What's included in a Flint stucco quote?
Paper, lath, weep screed, three coats, a standard texture and cleanup. Often extra: scaffolding ($1,150–$5,700), tear-off ($1.50–$5.50 per sq ft), painting or color coat, and the permit ($95–$485).
Prices verified November 2026 · Cross-referenced against 98+ American pricing sources · See methodology
Prices for the Flint metro area, November 2026. Outer suburbs may vary.
Get a fair stucco quote in Flint
Local stucco contractors · Free quotes · No obligation, no spam.