$6–$13 per square foot of wall for traditional three-coat stucco, installed, in 2026, and $8.50 is typical. A one-coat system runs $5–$10, synthetic stucco (EIFS) $8–$18, and a re-dash over sound stucco $3–$7. On a 2,000 sq ft home that is $12,000–$26,000.
Three-coat stucco: $6–$13 per sq ft installed, $8.50 typical
One-coat $5–$10; synthetic (EIFS) $8–$18; over brick or block $5–$10
Materials alone $2–$4 per sq ft; labor $2–$8
2,000 sq ft home: $12,000–$26,000; 3,000 sq ft two-story $19,200–$45,000
Smooth finish adds $1–$6 per sq ft
Prices verified November 2026 · Cross-referenced against 98+ American pricing sources · See methodology
01 / PricesUSA · November 2026
Stucco prices per square foot (2026)
Three-coat stucco costs $6–$13 per square foot installed. The lines below show what each system, substrate and finish does to the number.
Stucco prices per square foot (2026)Per sq ft, low to high with the typical price marked.
Synthetic stucco (EIFS) with foam insulation board$12$8–$18
The installed price covers two layers of building paper, metal lath, a weep screed at the bottom of the wall, corner beads, and three coats: a scratch coat keyed into the lath, a brown coat floated flat, and a finish coat with the texture and color. All three add up to about 7/8 inch. Materials are $2–$4 of the $6–$13; the rest is labor, scaffolding and curing time.
One-coat systems ($5–$10) put a thicker fiber-reinforced base coat straight over foam or paper, then the finish, and go on in days instead of weeks. Synthetic stucco, or EIFS ($8–$18), is foam board, a mesh-reinforced base coat and an acrylic finish; it insulates best and costs the most to fix.
02
Wall area, not floor area
Stucco is priced on the wall, so measure it: perimeter times wall height, minus windows and doors, plus gable ends. A 2,000 sq ft single-story home has roughly 2,000 sq ft of wall ($12,000–$26,000); a 3,000 sq ft two-story home has more wall and needs scaffolding ($19,200–$45,000).
Many contractors quote off floor area plus 10–15%. That works for a plain ranch and overcharges a tall, narrow house. Ask for the measured number.
03
Substrate and finish move the price
Stucco over brick or concrete block ($5–$10) skips the lath and often one coat, which is why Florida block homes come in cheaper per square foot than framed homes. Stucco over existing wood or vinyl siding is not recommended; the siding comes off first ($1–$3 per sq ft).
Dash, lace and sand textures are the standard price. A smooth Santa Barbara or Mission finish adds $1–$6 per sq ft because it takes a slower, more skilled trowel and more coats, and it shows every hairline crack.
04
Save money
Re-dash and color coat: the cheaper square foot
If the stucco is sound and dry, you don't need new stucco. A re-dash ($3–$7 per sq ft) bonds a new base and finish coat to the old wall; an acrylic color coat ($1.50–$5) changes the color and seals hairline cracks without paint for 15–20 years. Either costs a third to half of a new three-coat system.
The test is simple: tap the wall. Solid stucco sounds dull; hollow or drummy spots mean the stucco has let go of the lath and a re-dash will fail there.
05
Where quotes fall outside the range
Quotes under $6 per sq ft for a framed wall usually skip something: the second layer of paper, a weep screed, control joints or the full 7/8 inch thickness. Those are the walls that crack and leak in five years.
Quotes above $13 per sq ft are normal in New York, San Francisco and Chicago, on three-story walls, on small jobs under 300 sq ft, and for smooth finishes with integral color. Pick your city below for the local figure.
04 / Check a quoteFree · no sign-up
Got a price? See if it's fair
Traditional three-coat stucco (per sq ft of wall)
Type the price you were quoted. We compare it with the US range of $6–$13 per sq ft.
Get free quotes from up to 2 local stucco contractors
Free · No obligation · About a minute
1The job
2Budget
3Your details
C
Casey · LocalGoingRate
What do you need a price on?
Tap one to start.
C
Casey · LocalGoingRate
What's your rough budget?
A ballpark is fine. It helps the stucco contractors who reply.
C
Casey · LocalGoingRate
Where should they text you?
Max 2 stucco contractors. No call floods.
100% free. No obligation.
🔒 Only your matched stucco contractors see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 stucco contractors about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
C
Casey · LocalGoingRate
Check your phone
05 / Questions5 answers
Stucco cost per square foot: FAQ
How much is stucco per square foot installed?
$6–$13 per square foot for traditional three-coat stucco, about $8.50 typical. One-coat is $5–$10; synthetic (EIFS) $8–$18.
How much is stucco material per square foot?
$2–$4 for cement, sand and lime, or $4–$8 with paper and lath. Labor is the bigger share at $2–$8 per sq ft.
How much does it cost to stucco a 2,000 sq ft house?
$12,000–$26,000, about $17,000 typical, for three-coat stucco on roughly 2,000 sq ft of wall. A two-story 3,000 sq ft home is $19,200–$45,000 with scaffolding.
Is stucco cheaper than siding?
Vinyl siding is cheaper to install ($3–$11 per sq ft). Fiber cement ($7–$14) is in the same band as stucco. Stucco lasts longer than vinyl and needs no painting if the finish is colored.
Why is my stucco quote in square yards?
Some plasterers still bid by the square yard. One square yard is nine square feet, so divide the yard price by nine to compare with the figures here.
These are independent estimates built from public cost guides, 2026 contractor and city price pages, manufacturer and material data, permit schedules and federal wage data. No stucco company can pay to change them, so always get a couple of quotes. Last reviewed November 2026. Read the full methodology →