Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Local Going Rate — Independent · Data-Driven · American2026 edition195 US cities
Cost guide / Deck / USAVerified November 2026

Deck Cost USA 2026

By Our research team · Last verified · 12 min read · Methodology

Deck cost

Deck costs in the US

United States
Get free quotesFree · no obligation · max 2 pros
Normal range across the US
$4,800–$11,000per deck

What most homeowners pay for deck job, footings, frame, decking, basic railing and hardware included. Pick your city for local prices.

How we get this data
Typical
$7,500
Low end
$3,000
High end
$16,000
Cities priced
195
Sources
18+
Trades priced
39
Verified
November 2026

Building a 12 × 16 ft pressure-treated deck costs $4,800–$11,000 in the US in 2026, attached to the house with railing, and most homeowners pay about $7,500. The same deck in composite runs $8,500–$17,500. Per square foot, treated wood is $25–$55 installed and composite $40–$80; a 20 × 20 wood deck is $9,500–$21,000.

01 / The short answerUSA
Quick answer

$4,800–$11,000 to build a 12 × 16 ft pressure-treated deck in the US — attached, with railing, installed — $7,500 typical. Composite takes the same deck to $8,500–$17,500, treated wood runs $25–$55 a square foot, and a 20 × 20 wood deck is $9,500–$21,000. Pick your city ↓

  • 12 × 16 pressure-treated deck with railing: $4,800–$11,000 ($7,500 typical)
  • Per square foot installed: treated wood $25–$55; composite $40–$80
  • Composite 12 × 16 $8,500–$17,500; 20 × 20 wood deck $9,500–$21,000
  • Stairs $500–$2,000 a flight; permit $100–$800; tear-out $600–$2,500
  • Pick a city below for local prices across 195 US metros

Prices below come from national cost guides, manufacturer and lumber-yard prices, dated local price pages, city permit schedules, the model deck code and federal wage data for carpenters, applied across 195 US metros and re-checked in November 2026. Whole-deck prices include footings, frame, decking, a basic railing, hardware and cleanup; stairs, the permit, tear-out and railing upgrades are their own rows. Pick your city for local pricing.

A low, rectangular 12 × 16 in treated pine on a one-story house in a cheap market can come in near $3,000; the same footprint a story up, with a long stair run, deep frost footings and a tight lot in a top-cost city can reach $16,000 before anyone picks composite. Materials are about half of a wood deck's bill — $2,700–$5,400 at the yard for a 12 × 16 — and the rest is a crew for three to five days, the footings, the permit and the builder's overhead. The highest typical price on our city pages is San Francisco ($8,400); the lowest is McAllen ($6,800).

Prices verified November 2026 · Cross-referenced against 18+ American pricing sources · See methodology

02 / Prices by city195 metros

Deck cost by city

Typical deck ranges, re-verified November 2026 across 18+ sources. Largest cities first.

Typical deck price in the 20 largest US metrosTypical price, per deck. The line marks the US typical.
Chicago, IL $8,200
New York, NY $8,150
Seattle, WA $8,100
Boston, MA $8,050
San Diego, CA $7,850
Riverside, CA $7,750
Detroit, MI $7,650
Denver, CO $7,650
Phoenix, AZ $7,500
Atlanta, GA $7,300
Miami, FL $7,300
Tampa, FL $7,250
Houston, TX $7,150
Dallas, TX $7,100

Among the biggest metros, San Francisco is the priciest at $8,400 and Dallas the least at $7,100.

How deck prices vary across 195 US metrosNumber of metros at each typical price, per deck.

Half of the 195 metros we price sit between $7,050 and $7,500.

CityTypical range
New York, NY$5,200–$11,550 per deck
Los Angeles, CA$5,250–$11,600 per deck
Chicago, IL$5,250–$11,600 per deck
Dallas, TX$4,650–$10,450 per deck
Houston, TX$4,650–$10,500 per deck
Washington, DC$4,900–$11,100 per deck
Atlanta, GA$4,700–$10,700 per deck
Philadelphia, PA$4,800–$11,050 per deck
Miami, FL$4,750–$10,750 per deck
Phoenix, AZ$4,800–$11,000 per deck
Boston, MA$5,150–$11,500 per deck
San Francisco, CA$5,350–$11,800 per deck
Riverside, CA$4,950–$11,200 per deck
Detroit, MI$4,900–$11,150 per deck
Seattle, WA$5,200–$11,500 per deck
Minneapolis, MN$5,050–$11,350 per deck
San Diego, CA$5,050–$11,350 per deck
Tampa, FL$4,700–$10,600 per deck
Orange County, CA$5,100–$11,400 per deck
Denver, CO$4,900–$11,100 per deck
Oakland, CA$5,300–$11,650 per deck
Charlotte, NC$4,700–$10,550 per deck
Baltimore, MD$4,850–$11,050 per deck
St. Louis, MO$5,000–$11,250 per deck
Orlando, FL$4,650–$10,500 per deck
Brooklyn, NY$5,150–$11,450 per deck
San Antonio, TX$4,650–$10,350 per deck
Fort Worth, TX$4,650–$10,350 per deck
Austin, TX$4,650–$10,500 per deck
Portland, OR$5,050–$11,350 per deck
Choose your city51 states

Each city page has local rates by area, real-world deck building costs and a city-specific FAQ. Prices shown are the low end of the typical range, per deck.

Alabama

Alaska

Arizona

Arkansas

California

Colorado

Connecticut

Delaware

District of Columbia

Florida

Georgia

Hawaii

Idaho

Illinois

Indiana

Iowa

Kansas

Kentucky

Louisiana

Maine

Maryland

Massachusetts

Michigan

Minnesota

Mississippi

Missouri

Montana

Nebraska

Nevada

New Hampshire

New Jersey

New Mexico

New York

North Carolina

North Dakota

Ohio

Oklahoma

Oregon

Pennsylvania

Rhode Island

South Carolina

South Dakota

Tennessee

Texas

Utah

Vermont

Virginia

Washington

West Virginia

Wisconsin

Wyoming

03 / National price listDECK · USA

Deck prices, 2026

JobLowTypicalHigh
Build a 12 × 16 ft (192 sq ft) pressure-treated wood deck, attached, with railingper deck$4,800$7,500$11,000
Build a 12 × 16 ft composite deck (Trex or TimberTech class) with composite railingper deck$8,500$12,500$17,500
Build a 16 × 20 ft (320 sq ft) pressure-treated deck with railingper deck$7,500$11,500$17,500
Build a 20 × 20 ft (400 sq ft) pressure-treated deck with railingper deck$9,500$14,500$21,000
Pressure-treated wood deck, per square foot (framing, decking, basic railing)per sq ft$25$38$55
Cedar or redwood deck, per square footper sq ft$30$42$60
Ipe or other tropical hardwood deck, per square footper sq ft$40$58$80
Composite deck (Trex, TimberTech, Fiberon), per square footper sq ft$40$58$80
PVC deck (AZEK / TimberTech Advanced PVC), per square footper sq ft$45$65$90
Elevated or second-story deck, added cost per square footper sq ft$8$15$30
Pressure-treated wood railing, per linear footper linear ft$25$40$60
Composite railing (Trex, TimberTech), per linear footper linear ft$60$95$165
Aluminum railing, per linear footper linear ft$45$75$120
Cable railing, per linear footper linear ft$100$150$225
Deck stairs, one flight of 4–6 steps with handrailper flight$500$1,000$2,000
Concrete footing, dug and poured, with post baseper footing$150$275$400
Building permit, plan review and inspectionsper permit$100$350$800
Tear out and haul away an old 12 × 16 deckper deck$600$1,300$2,500
Deck repair: replace boards, re-fasten railing, small jobper job$300$900$2,500
Clean and stain or seal a 12 × 16 deck, no sandingper deck$350$600$1,000
Sand and refinish a 12 × 16 deck (strip, sand, stain)per deck$600$1,100$1,800
Pergola over a deck, 12 × 12 to 12 × 16, installedper pergola$2,500$5,500$10,000
Roof over a 12 × 16 deck (covered deck, shingled, open sides)per deck$4,000$8,000$14,000
Deck inspection (safety or pre-sale)per inspection$125$250$450
Bigger deck jobs: what they cost in the USPer deck, low to high with the typical price marked. Every line is in the table above.
Build a 20 × 20 ft (400 sq ft) pressure-treated deck with railing $14,500$9,500–$21K
Build a 12 × 16 ft composite deck (Trex or TimberTech class) with composite railing $12,500$8,500–$17.5K
Build a 16 × 20 ft (320 sq ft) pressure-treated deck with railing $11,500$7,500–$17.5K
Roof over a 12 × 16 deck (covered deck, shingled, open sides) $8,000$4,000–$14K
Build a 12 × 16 ft (192 sq ft) pressure-treated wood deck, attached, with railing $7,500$4,800–$11K
Smaller deck jobs and repairs in the USPer deck, low to high with the typical price marked. Every line is in the table above.
Tear out and haul away an old 12 × 16 deck $1,300$600–$2,500
Sand and refinish a 12 × 16 deck (strip, sand, stain) $1,100$600–$1,800
Clean and stain or seal a 12 × 16 deck, no sanding $600$350–$1,000

Prices verified November 2026 · Cross-referenced against 18+ American pricing sources · See methodology

National average prices. Select a city above for location-specific pricing.

Already got a quote?
See if it's fair against US prices. Free, no sign-up.

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local deck builders

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What kind of deck job is it?

Tap one to start.

04 / Who to hireMATERIAL OR TYPE

Wood, Composite, PVC: Deck Costs by Material and Type

Treated wood is $25–$55 a square foot installed, cedar or redwood $30–$60, composite $40–$80 and PVC $45–$90. Prices include the treated frame, footings and a basic railing.

Material or typeCostBest for
Pressure-treated wood deck$25–$55 per sq ftThe cheapest deck to build. Needs cleaning and a stain or seal every 2–3 years ($350–$1,000 for a 12 × 16), lasts 10–25 years.
Cedar or redwood deck$30–$60 per sq ftNaturally rot-resistant, lighter and better looking than treated pine. Still needs staining; redwood is cheapest on the West Coast.
Ipe or tropical hardwood deck$40–$80 per sq ftVery dense and long-lived, but heavy, hard to cut and slow to install. Oil it yearly or let it silver.
Composite deck (Trex, TimberTech, Fiberon)$40–$80 per sq ftWood-plastic boards on a treated frame. No staining, 25–50 year life; costs 40–80% more than wood up front.
PVC deck (AZEK, TimberTech Advanced PVC)$45–$90 per sq ftAll-plastic boards: lightest, coolest underfoot, best for docks, pools and shade-free yards. The top of the price list.
Elevated or second-story deck+$8–$30 per sq ftWalkout and upper-floor decks need taller posts, bigger beams, stairs and often a structural review. Add this to any material above.
Deck railing$25–$60 wood; $45–$120 aluminum; $60–$165 composite; $100–$225 cable, per linear ftRequired on any deck more than 30 in off the ground. A 12 × 16 attached deck has about 40 linear ft of it.
Stairs, footings and permit$500–$2,000 per flight; $150–$400 per footing; $100–$800 permitThe lines a cheap quote leaves out. Footings must reach below the frost line; stairs need a handrail and their own footing.
Deck repair, staining and refinishing$300–$2,500 repair; $350–$1,000 stain; $600–$1,800 sand and refinishKeeping a wood deck alive. A full tear-out and haul-away is $600–$2,500 when repair stops making sense.
Covered deck, pergola or roof$2,500–$10,000 pergola; $4,000–$14,000 roof over a 12 × 16Shade and rain cover. A roof ties into the house roof or wall and needs its own permit; a pergola is the cheaper, open version.
Cost by material or typeTypical range, per sq ft.
Pressure-treated wood deck $25–$55per sq ft
Cedar or redwood deck $30–$60per sq ft
Ipe or tropical hardwood deck $40–$80per sq ft
Composite deck (Trex, TimberTech, Fiberon) $40–$80per sq ft
PVC deck (AZEK, TimberTech Advanced PVC) $45–$90per sq ft
Elevated or second-story deck $8–$30per sq ft

The frame is pressure-treated lumber on every deck; the boards are the choice. Treated pine is cheapest and needs a stain or seal every two or three years ($350–$1,000 a time for a 12 × 16). Cedar and redwood look better and resist rot on their own but still need finishing. Composite and PVC cost 40–80% more up front, never get stained, and carry 25- to 50-year warranties. Height is the other big lever: a deck a story up adds $8–$30 a square foot whatever it is made of.

05 / Rates & packagesUSA

Common Deck Jobs and What They Cost (2026)

Most 12 × 16 decks cost $4,800–$11,000 and take three to five working days once the permit is in hand. Bigger and higher decks take one to two weeks. Time on site is in brackets.

Block or rateLowTypicalHigh
Build a 12 × 16 pressure-treated deck with railing (3–5 days)$4,800$7,500$11,000
Build a 12 × 16 composite deck with composite railing (4–6 days)$8,500$12,500$17,500
Build a 16 × 20 pressure-treated deck (5–7 days)$7,500$11,500$17,500
Build a 20 × 20 pressure-treated deck (1–2 weeks)$9,500$14,500$21,000
Build a 12 × 16 deck one story up, with stairs (1–2 weeks)$6,850$11,400$18,750
Add a flight of stairs with handrail (1 day)$500$1,000$2,000
Replace the railing on a 12 × 16 deck, treated wood (1 day)$1,000$1,600$2,400
Replace the railing on a 12 × 16 deck, aluminum (1 day)$1,800$3,000$4,800
Pour six footings for a 12 × 16 deck (1 day plus inspection)$900$1,650$2,400
Tear out and haul away a 12 × 16 deck (half a day to a day)$600$1,300$2,500
Tear out and replace a 12 × 16 deck, treated wood (4–6 days)$5,400$8,800$13,500
Repair boards and re-fasten railing (2–6 hrs)$300$900$2,500
Clean and stain a 12 × 16 deck (1–2 days incl. drying)$350$600$1,000
Sand and refinish a 12 × 16 deck (2–3 days)$600$1,100$1,800
Pergola over a deck (1–2 days)$2,500$5,500$10,000
Roof over a 12 × 16 deck (3–5 days)$4,000$8,000$14,000

What moves these prices: size and shape, the board material, height off the ground, railing length and type, the number and depth of footings, your city's labor rates and whether an old deck has to come out first. Carpenters bill $35–$100 an hour when they work by the hour; most of the jobs above are quoted flat from a drawing.

06 / Your optionscompared

Pressure-Treated vs Cedar vs Composite: What Each Costs and Why

A 12 × 16 in treated pine is $7,500 typical, in cedar or redwood about $8,050, and in composite $12,500. Same frame, same footings, three different decks to live with.

FactorPressure-treated pineCedar or redwoodComposite (Trex, TimberTech)
12 × 16 deck, typical$7,500$8,050$12,500
Usual range$4,800–$11,000$5,750–$11,500$8,500–$17,500
Per square foot installed$25–$55$30–$60$40–$80
Boards only, per square foot$2–$5$3–$7$5–$16
UpkeepClean and stain every 2–3 years, $350–$1,000Stain or oil every 2–3 years, $350–$1,000; grays if leftWash. No staining, no sealing
Life10–25 years, less if the stain lapses10–25 years; heartwood lasts longest25–50 years; 25- to 50-year warranties
Feel and lookGreen-tinted, checks and splinters with age; takes any stainWarm color, light, cool underfoot; redwood cheapest in the WestEven color, hot in full sun, heavier; dark colors fade less than they did
Watch out forWet lumber that shrinks and twists; nails instead of screwsSapwood grades that rot like pine; price swings by regionJoists over 16 in apart; entry lines sold at premium prices; matching composite rail that doubles the rail bill

The frame underneath is treated lumber on all three, so the footings, ledger and permit cost the same. The choice is up-front price against years of staining: the composite premium on a 12 × 16 is about $5,000, and 25 years of staining a wood deck every two or three years is roughly $5,000.

07 / Beyond the jobextras

Upkeep, Repairs and the Cost per Year of Owning a Deck

A wood deck needs cleaning and a stain or seal every two or three years at $350–$1,000 for a 12 × 16, about $240 a year. Spread over its life, a treated deck costs about $415 a year to own and a composite one $355.

ItemLowTypicalHigh
Clean and stain a 12 × 16 wood deck (every 2–3 years)$350$600$1,000
Staining spread per year (every 3 / 2.5 / 2 years)$115$240$500
Sand and refinish a 12 × 16 deck (when the finish fails)$600$1,100$1,800
Annual wood-deck upkeep, cost-guide figure (wash and reseal)$700$1,150$1,600
Repair boards and railing, typical call$300$900$2,500
Deck inspection, safety or pre-sale$125$250$450
12 × 16 treated deck spread over 25 / 18 / 10 years$190$415$1,100
12 × 16 composite deck spread over 50 / 35 / 25 years$170$355$700
Tear out and haul away a 12 × 16 deck at the end$600$1,300$2,500

Cost per year = the deck price at $4,800, $7,500 and $11,000 (wood) or $8,500, $12,500 and $17,500 (composite) divided by a long, middle and short life: a well-built, well-stained deck lasts toward the long end, a neglected one toward the short end. Add the staining line to the wood figure and the two materials cost about the same per year; composite just moves the money to the front.

08 / What moves the priceUSA

What affects deck costs

Size and shape

A 12 × 16 is $4,800–$11,000; a 16 × 20 $7,500–$17,500; a 20 × 20 $9,500–$21,000. Big decks cost less per square foot because footings, ledger, permit and setup are fixed. Angles, curves and board patterns add 15–20%.

Decking material

Per square foot installed: treated wood $25–$55, cedar or redwood $30–$60, tropical hardwood $40–$80, composite $40–$80, PVC $45–$90. Boards are the choice; the frame is treated lumber either way.

Height and stairs

Over 30 inches needs a 36-inch guard; a deck a story up adds $8–$30 a square foot for posts, beams, bracing and deeper footings, and a flight of stairs is $500–$2,000. Stairs and extra levels add 20–60% to a job.

Railing

About 40 linear ft on a 12 × 16: $1,000–$2,400 in treated wood, $1,800–$4,800 in aluminum, $2,400–$6,600 in composite, $4,000–$9,000 in cable. On a small deck the rail can be a third of the bill.

Your city, your soil

Labor is about half of a wood deck, so prices follow local carpenter pay: San Francisco ($8,400 typical for a 12 × 16) sits at the top of our city pages and McAllen ($6,800) at the bottom, against the US typical of $7,500. Frost depth sets how deep each $150–$400 footing goes — 36 to 48 inches across the upper Midwest and Northeast, 12 inches in Texas and the Sun Belt.

Permit, tear-out and access

The permit is $100–$800, tearing out an old deck $600–$2,500, and a yard the crew can only reach through a gate, a slope, rock or roots adds 10–20% to labor. Spring quotes run highest; fall and winter 5–15% lower.

09 / How to pay lessUSA

How to save on deck

  1. Keep it a low rectangle.A ground-hugging 12 × 16 rectangle is the cheapest deck there is at $4,800–$11,000. Every angle, level change and foot of height adds posts, railing and cutting.
  2. Build the size you will use, once.A 20 × 20 at $14,500 is $36 a square foot; a 12 × 16 at $7,500 is $39. Adding on later means a second permit and a second set of footings.
  3. Book the off-season.Fall and winter slots run 5–15% cheaper where the ground can be dug. In the Sun Belt, winter is the best building weather of the year.
  4. Composite boards, aluminum rail.Aluminum rail at $45–$120 a linear foot costs less than matching composite rail at $60–$165, looks thinner and does not fade. Pick an entry board line (Trex Enhance, TimberTech Edge) and the composite premium shrinks.
  5. Do the tear-out and the staining yourself.Removing an old deck ($600–$2,500) is labor and a dump run; staining a new wood deck ($350–$1,000 every two or three years) is a weekend. Both are fair DIY jobs. Footings and the ledger are not.
  6. Get footings, ledger and hardware in writing.Quotes $2,700 apart on one deck usually differ on footings (blocks vs $150–$400 poured footings), the ledger bolts and flashing, and the fasteners, not skill. Make both quotes name all three.

Get two real quotes

Local deck builders · free · max 2 will contact you · no spam.

Get quotes →
10 / By sizescale

Deck Cost by Size

Quick answer

12 × 16 ft (192 sq ft) in treated wood: $4,800–$11,000. 16 × 20 ft (320 sq ft): $7,500–$17,500. 20 × 20 ft (400 sq ft): $9,500–$21,000. In composite, a 12 × 16 is $8,500–$17,500, a 16 × 20 about $12,800–$25,600 and a 20 × 20 $16,000–$32,000.

Worked example: a 12 × 16 treated deck is about $7,500. Add a flight of stairs at $1,000, swap the wood rail for aluminum (about $1,400 more on 40 ft) and the job is roughly $9,900, about 32% more, which is why two quotes for the same deck can look nothing alike until you line up what each one includes.

Height matters more than the extra 8 feet of length. A 20 × 20 is $14,500 typical against $7,500 for a 12 × 16, but lifting that 12 × 16 a story up adds $1,550–$5,750 on its own for 6 × 6 posts, a bigger beam, bracing and deeper footings — $6,350–$16,750 before the stairs.

11 / Before you pay a depositchecklist

What a deck quote should include

A real deck quote answers all of these. If it answers fewer than six, ask before you pay a deposit.

  • The finished deck size and height off the ground, with a sketch showing stairs and railing runs
  • Decking named by species or brand and line (5/4 treated pine, cedar, Trex Enhance, TimberTech Prime+), and the fastener type
  • The frame: joist size and spacing, beam size, post size, and how the ledger is bolted and flashed to the house
  • Footings: type, number and depth below grade, and who pays if rock or roots turn up
  • Railing material, height and style, with stairs as their own line and the number of steps
  • Who pulls the permit, what it costs, and that the price includes passing all inspections
  • Old deck removal and disposal as its own line
  • Proof of liability insurance, and the state license or registration number where your state has one
  • Start and finish dates, payment stages, the workmanship warranty and the board maker's warranty
11.1 / Permits and the deck codeIRC

Deck permits and code: when you need one, what it costs, and the six rules inspectors check

A deck permit costs $100–$800 in 2026 and is required for almost every attached deck. Under the model code (IRC R105.2) only a deck of 200 sq ft or less, not more than 30 inches above grade, not attached to the house and not serving the exit door is exempt — so a 12 × 16 bolted to the kitchen wall always needs one.

The permit buys plan review and two or three inspections — footings before the concrete goes in, framing before the boards go down, and a final — and the inspector works from the IRC deck section (R507) and the American Wood Council's free DCA 6 guide. The six things they check: footings bearing on undisturbed soil at least 12 inches down and below the local frost line; a ledger at least 2 × 8, fastened with ½-inch lag screws or bolts to the house rim joist (never to brick veneer or a cantilever) and flashed; 6 × 6 posts; joist spans within the tables (a Southern pine 2 × 8 at 16 inches spans 11 ft 10 in); a 36-inch guard on any deck more than 30 inches up, with no opening a 4-inch ball can pass; and stairs with risers no taller than 7¾ inches, treads at least 10 inches deep and a graspable handrail on four or more risers.

Frost depth is the line that changes a quote between cities. Where the ground freezes deep, every footing is a deeper hole and more concrete, and the digging season is shorter. Where it does not freeze, footings still go 12 inches down onto undisturbed soil. The model-code frost map runs from 12 inches across the South and Pacific coast to 36–48 inches in the upper Midwest and Northeast and 60 inches in northern Minnesota, North Dakota and Maine; your building department publishes the local number.

  • Footing depth: 24 inches is usual in Georgia, Alabama and Arkansas, 12 inches in Dallas and most of the Sun Belt, 48–60 inches in the Northeast, where the 12-inch code minimum is the floor everywhere
  • Ask who pulls the permit: a builder who wants you to pull it as 'owner-builder' is often unlicensed or uninsured
  • Keep the final inspection sign-off with the house papers — a deck with no permit record is the first thing a buyer's inspector flags
  • Historic districts and homeowner associations review design, height and railing style before the city will issue the permit; allow two to six weeks
  • A structural engineer's letter is sometimes required for a deck more than one story up, a roof over a deck, or a ledger on an unusual wall — budget $100–$220 an hour for the review

Building without a permit saves the fee and costs the sale: most cities can make you open up or remove unpermitted work, and insurers can deny a claim for an unpermitted deck that fails.

11.2 / Lumber and composite prices2025–2026

What deck lumber and composite boards cost in 2026, and why quotes moved

Pressure-treated decking costs $2–$5 a square foot in boards; composite $5–$16; the whole material list for a 12 × 16 treated deck $2,700–$5,400. A 10% Section 232 tariff on imported softwood lumber took effect October 14, 2025, on top of 35% duties on Canadian softwood — yet the framing-lumber composite stood at $449 per 1,000 board feet on November 6, 2026, 3.2% below a year earlier, because home building slowed. Deck prices rose about 1.1% over the past year in our model, almost all of it labor.

ItemPriceShare of a 12 × 16 treated deckSource
Treated decking boards (5/4 × 6 pine)$2–$5 per sq ft$384–$960National cost guides, 2025–2026
Cedar decking$3–$7 per sq ft$576–$1,344National cost guides, 2025–2026
Ipe decking$10–$20 per sq ft$1,920–$3,840National cost guides, 2025–2026
Composite boards: Trex Enhance → Signature$5–$16 per sq ft$960–$3,072Angi Trex guide, Nov 2026; HomeGuide
PVC boards (AZEK, TimberTech Advanced PVC)$5–$13 per sq ft$960–$2,496HomeGuide composite guide
All materials, treated deck (frame, boards, rail, hardware, concrete)$14–$28 per sq ft$2,700–$5,400HomeGuide deck guide
Labor, treated deck$11–$25 per sq ft$2,112–$4,800HomeGuide, Forbes, Angi
Section 232 tariff, imported softwood lumber10% from October 14, 2025Frame and treated boardsPresidential proclamation, Sept 29, 2025
Duties on Canadian softwood lumber (anti-dumping + countervailing)14.5% → 35% in Aug 2025; 45% with the 232 tariffSpruce-pine-fir framingCommerce Department via NAHB, Aug–Sep 2025
Framing lumber composite price$449 per 1,000 board feet, November 6, 2026 (-3.2% year over year)About 30 pieces of 2 × 8 and six 6 × 6 postsMadison's Lumber Price Index via NAHB, Nov 2026

Board prices are yard prices before contractor discounts and delivery. A 12 × 16 deck uses about 192 sq ft of decking plus 10–15% waste, roughly 30 pieces of 2 × 8 framing, six 6 × 6 posts and 40 linear ft of railing.

Materials are about half of a wood deck and more than half of a composite one, so board prices matter more here than in most trades. Framing lumber is mostly Southern yellow pine and Canadian spruce-pine-fir; the treated boards on top are Southern pine. The September 2025 proclamation put a 10% tariff on imported softwood timber and lumber from October 14, 2025 (kitchen cabinets and vanities at 25%, rising to 50% on January 1, 2026), and it stacked on Canadian softwood duties that the Commerce Department had already lifted from 14.5% to 35% in August 2025 — 45% all in on the spruce-pine-fir that frames most decks, from a country that supplies about 85% of US lumber imports. The market absorbed it: with home building slow, the framing-lumber composite sat at $449 per 1,000 board feet on November 6, 2026, 3.2% under a year earlier and far below the 2021 spike. Treated boards followed. A wood deck costs about the same in materials as it did a year ago; the risk is the other way, if building picks up while the duties stand.

Composite boards did not get the tariff — they are made in the US from recycled plastic and wood flour — but their makers post list increases most years (Trex raised railing and fastener prices on January 1, 2026), and the boards are $5–$16 a square foot against $2–$5 for treated pine. Our year-on-year figure of 1.1% weighs carpenters' pay (up 2.1% in federal data from May 2024 to May 2025) at half and materials, flat on balance, at half; the full basis is in our research notes.

  • Ask for the board line by name — Enhance, Select, Transcend; Edge, Prime+, Reserve — and the per-square-foot material price in the quote; the gap between entry and premium lines is $2,112 on a 12 × 16
  • Let the builder buy the lumber: contractor pricing and delivery cost less than a cash-and-carry run, and the yard's return policy covers the waste
  • If a quote is more than 60 days old, expect the builder to re-price the lumber before signing

If a price jumps between estimate and invoice, ask for the lumber yard receipts. Board prices move, but a 30% jump on a deck quote is scope, not lumber.

11.3 / Cheap quotes, seasons, DIY and resaleUSA

What the cheap deck quote leaves out, when to book, the DIY math, and what a deck returns at sale

Two quotes for the same 12 × 16 deck can be $2,700 apart, and the gap is usually what is missing, not skill. Here is what to check, when builders discount, when building it yourself pays, and what the 2025 Cost vs Value report says a deck returns.

Timing moves the price too. Deck builders are busiest from March to June, when quotes run highest and the good crews book out weeks ahead. Fall and winter work runs 5–15% cheaper where the ground can still be dug, and the deck is finished before the first warm weekend. In frost country the digging season closes when the ground freezes; in the Sun Belt winter is the best deck-building weather of the year. Difficult access — a backyard reached only through a side gate, a steep lot, rock or roots — adds 10–20% to labor whatever the month.

The DIY math for a 12 × 16 treated deck: materials cost $2,700–$5,400 at the yard ($14–$28 a square foot) against $4,800–$11,000 for a builder, so you save about $3,650 — roughly 65% of the pro price — for four to six weekends of work, plus $500–$1,000 of tools if you do not own them, and you still pull the permit and pass the same inspections. Low, rectangular, ground-level decks are a fair DIY project; anything a story up, a roof, or a ledger on a wall you cannot see behind is a job to hire out.

Resale: the 2025 Cost vs Value report (Zonda/JLC, 119 US markets) puts a wood deck addition at $18,263 and 94.9% of that recouped at sale, and a composite deck addition at $25,096 and 88.5% recouped — among the best-returning outdoor projects, though well below a garage door or steel entry door, which return more than their cost. Older guides quoting 40–50% deck returns predate the post-2020 outdoor-living premium.

  1. Precast blocks instead of footings.Deck blocks sitting on the dirt are for small freestanding platforms. An attached deck needs 6 footings dug below the frost line at $150–$400 each — $900–$2,400 that a block-and-dirt quote skips.
  2. A nailed, unflashed ledger.The board bolted to the house is where decks fail. Code wants ½-inch lag screws or through-bolts on a set spacing, metal flashing behind it, and never a ledger on brick veneer. A quote that does not mention the ledger has not priced it.
  3. No permit.The permit and inspections are $100–$800. A builder who leaves it out, or asks you to pull it as the owner, is saving the fee and sometimes hiding a missing license.
  4. Stairs, railing and disposal priced later.Stairs are $500–$2,000 a flight, railing $25–$60 a linear foot in wood (about 40 ft on a 12 × 16), and tearing out the old deck $600–$2,500. Make both quotes carry the same three lines.
  5. Nails and the wrong hardware.Joist hangers, structural screws, hot-dipped galvanized or stainless fasteners rated for treated lumber, and lateral hold-downs are a few hundred dollars that a cheap quote swaps for framing nails.
  6. No insurance, no license.Ask for the certificate of liability insurance and, where your state licenses contractors, the license number. A fall from a ledge or a collapsed deck is your problem if the builder has neither.

If you want a cheaper pro deck without the corner-cutting: keep it a low rectangle, pick an entry board line, use aluminum rail with composite boards, book the off-season, and do the tear-out and the staining yourself. Those five moves can take $7,500 closer to $4,800 without touching the footings or the ledger.

12 / QuestionsUSA

Deck cost: FAQ

How much does it cost to build a deck?

$4,800–$11,000 for a 12 × 16 pressure-treated deck attached to the house with railing, with $7,500 typical in 2026. In composite the same deck is $8,500–$17,500; a 20 × 20 wood deck $9,500–$21,000.

How much does a deck cost per square foot?

$25–$55 installed for treated wood, $30–$60 for cedar or redwood, $40–$80 for composite and $45–$90 for PVC, including the frame and a basic railing. A deck a story up adds $8–$30 a square foot.

How much does a Trex or composite deck cost?

$8,500–$17,500 for a 12 × 16 with composite railing, or $40–$80 a square foot installed. Trex Enhance boards are $5–$7 a square foot, Transcend $10–$15.

How much does a 20 × 20 deck cost?

$9,500–$21,000 in pressure-treated wood with railing, and about $16,000–$32,000 in composite. A 16 × 20 is $7,500–$17,500.

Do I need a permit to build a deck?

Almost always for an attached deck. The model code exempts only a deck of 200 sq ft or less, under 30 inches off the ground, not attached to the house and not at an exit door. Permits run $100–$800 and the builder normally pulls them. Not legal advice.

How much do deck stairs and railing cost?

A flight of 4–6 steps with handrail is $500–$2,000. Railing is $25–$60 a linear foot in treated wood, $45–$120 in aluminum, $60–$165 in composite and $100–$225 in cable.

How much does it cost to replace a deck?

$5,400–$13,500 for a 12 × 16 in treated wood — $600–$2,500 to tear out and haul away the old one plus the new deck — and $9,100–$20,000 in composite.

Does a deck need a licensed contractor?

It depends on the state. California requires a CSLB license on any job of $1,000 or more; Oregon and Washington license or register every contractor; Florida, Arizona, Nevada and many others license general or residential contractors above a dollar threshold; Texas, Colorado, Ohio and some others leave it to cities. Everywhere, ask for proof of insurance and make sure a permit is pulled. Not legal advice.

Is it cheaper to build a deck yourself?

Materials for a 12 × 16 treated deck are $2,700–$5,400 against $4,800–$11,000 for a builder, so DIY saves about 65% for four to six weekends of work plus $500–$1,000 of tools. Low, rectangular decks are a fair DIY job; anything a story up or with a roof is not.

Are deck prices going up in 2026?

Barely: about 1.1% over the past year in our model. Carpenters' median pay rose 2.1% in federal data (May 2024 to May 2025), but framing lumber was 3.2% cheaper in November 2026 than a year before ($449 per 1,000 board feet) even with the 10% Section 232 tariff on imports from October 14, 2025 and 35% Canadian duties, because home building slowed. Composite makers posted modest list increases.

Done your research?

Pick your city for local prices, or get two real deck quotes now. Free, no spam.

Get quotes →
Get deck quotesMax 2 deck builders · free · no spam→