How much does a deck cost in El Paso?
By Our research team · Last verified · Methodology
Most deck builders in El Paso charge $4,550–$10,000 for a 12 × 16 pressure-treated deck about $35 a square foot, with $6,800 the going rate. Composite is $38–$74 a square foot here, and a new railing $23–$54 a linear foot in wood.
How we get this data- Typical
- $6,800
- Low end
- $2,450
- High end
- $13,050
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local deck builders send you a real quote. Free, no obligation.
Get my fair quote →The typical El Paso price is $6,800, 9% below the US typical of $7,500.
El Paso's price band
El Paso is cheaper than 97% of the 195 US metros we price for deck work.
Expect $4,550–$10,000 for a 12 × 16 pressure-treated deck in El Paso, with $6,800 the going rate. Bigger decks cost less per square foot: $7,100–$15,900 for 16 × 20 and $9,000–$19,050 for 20 × 20 in treated wood. Composite is $38–$74 a square foot installed, against $24–$50 for wood.
El Paso is a smaller market. A 12 × 16 deck here is about 9% below the US typical of $7,500. Lumber and composite boards cost about the same at every yard in the country, so the gap is mostly the crew's time: carpenters in the El Paso, TX metro earn a median $42,430 a year in federal wage data, about 30% below the US median of $60,580.
Texas has no state license for general or deck contractors and no dollar limit, but most cities require contractors to register before pulling a permit, and an attached deck needs one. This is general information, not legal advice.
Comparing cities, or after the US-wide picture? See the national guide: Deck cost in the USA.
$4,550–$10,000 to build a 12 × 16 ft pressure-treated deck in El Paso — attached, with railing, installed — typically $6,800. Composite takes the same deck to $8,100–$16,200; a 20 × 20 wood deck is $9,000–$19,050. Verified November 2026. Get free El Paso quotes →
- 12 × 16 pressure-treated deck with railing: $4,550–$10,000 ($6,800 typical)
- Composite 12 × 16: $8,100–$16,200; per sq ft wood $24–$50, composite $38–$74
- 16 × 20 wood deck $7,100–$15,900; 20 × 20 $9,000–$19,050
- Stairs $470–$1,800 a flight; wood railing $23–$54 a linear ft; permit $97–$755
- Tear out an old 12 × 16: $545–$2,150; clean and stain: $320–$855
Prices verified November 2026 · Cross-referenced against 18+ American pricing sources · See methodology
Installed prices with labor, materials and hardware unless the row says otherwise; whole-deck rows include a basic railing. El Paso metro, re-verified November 2026. Stairs, permit, tear-out and railing upgrades are their own rows.
| Service | Low | Typical | High |
|---|---|---|---|
| Build a 12 × 16 ft (192 sq ft) pressure-treated wood deck, attached, with railingper deck | $4,550per deck | $6,800 | $10,000 |
| Build a 12 × 16 ft composite deck (Trex or TimberTech class) with composite railingper deck | $8,100per deck | $11,600 | $16,200 |
| Build a 16 × 20 ft (320 sq ft) pressure-treated deck with railingper deck | $7,100per deck | $10,450 | $15,900 |
| Build a 20 × 20 ft (400 sq ft) pressure-treated deck with railingper deck | $9,000per deck | $13,150 | $19,050 |
| Pressure-treated wood deck, per square foot (framing, decking, basic railing)per sq ft | $24per sq ft | $35 | $50 |
| Cedar or redwood deck, per square footper sq ft | $29per sq ft | $39 | $55 |
| Ipe or other tropical hardwood deck, per square footper sq ft | $38per sq ft | $54 | $74 |
| Composite deck (Trex, TimberTech, Fiberon), per square footper sq ft | $38per sq ft | $54 | $74 |
| PVC deck (AZEK / TimberTech Advanced PVC), per square footper sq ft | $43per sq ft | $61 | $84 |
| Elevated or second-story deck, added cost per square footper sq ft | $7per sq ft | $13 | $27 |
| Pressure-treated wood railing, per linear footper linear ft | $23per linear ft | $36 | $54 |
| Composite railing (Trex, TimberTech), per linear footper linear ft | $58per linear ft | $89 | $155 |
| Aluminum railing, per linear footper linear ft | $43per linear ft | $70 | $110 |
| Cable railing, per linear footper linear ft | $97per linear ft | $140 | $215 |
| Deck stairs, one flight of 4–6 steps with handrailper flight | $470per flight | $900 | $1,800 |
| Concrete footing, dug and poured, with post baseper footing | $140per footing | $245 | $355 |
| Building permit, plan review and inspectionsper permit | $97per permit | $330 | $755 |
| Tear out and haul away an old 12 × 16 deckper deck | $545per deck | $1,100 | $2,150 |
| Deck repair: replace boards, re-fasten railing, small jobper job | $275per job | $785 | $2,200 |
| Clean and stain or seal a 12 × 16 deck, no sandingper deck | $320per deck | $510 | $855 |
| Sand and refinish a 12 × 16 deck (strip, sand, stain)per deck | $545per deck | $940 | $1,550 |
| Pergola over a deck, 12 × 12 to 12 × 16, installedper pergola | $2,400per pergola | $5,050 | $9,150 |
| Roof over a 12 × 16 deck (covered deck, shingled, open sides)per deck | $3,800per deck | $7,250 | $12,700 |
| Deck inspection (safety or pre-sale)per inspection | $115per inspection | $215 | $385 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local deck builders in El Paso
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What kind of deck job is it?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the deck builders who reply.
Where should they text you?
- Max 2 deck builders. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched deck builders see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 deck builders about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Prices verified November 2026 · Cross-referenced against 18+ American pricing sources · See methodology
Prices cover the El Paso metro. Outlying towns can run a little lower; tight lots and older houses in Downtown & Sunset Heights and Central & Segundo Barrio sit at the top of each range for access and ledger work.
Deck prices across El Paso
Same boards, four price bands. Parking, alley access and older ledgers push Downtown & Sunset Heights to the top; decks in Northeast & Westside tend to come in at or under the city typical, and East Side, Socorro & Las Cruces NM has the biggest decks.
Downtown & Sunset Heights
- 12 × 16 treated deck
- $4,800–$11,200 per deck
- Composite deck
- $8,600–$18,150 / 12 × 16 composite deck
Dense blocks and small yards, so most decks here are small, elevated off a kitchen door, or rebuilt on an existing footprint. Setup time, not square footage, pushes the price up.
Central & Segundo Barrio
- 12 × 16 treated deck
- $4,650–$10,500 per deck
- Composite deck
- $8,250–$17,000 / 12 × 16 composite deck
Older homes being updated one project at a time. Composite rebuilds on existing footings are common; confirm the old frame is sound before paying to reuse it.
Northeast & Westside
- 12 × 16 treated deck
- $4,350–$9,800 per deck
- Composite deck
- $7,800–$15,900 / 12 × 16 composite deck
Rental-heavy streets where small repairs and board replacements outnumber new builds. Rates run at or just under the city average.
East Side, Socorro & Las Cruces NM
- 12 × 16 treated deck
- $4,550–$10,500 per deck
- Composite deck
- $8,100–$17,000 / 12 × 16 composite deck
Plenty of newer houses with sliding doors already framed for a deck. Expect average rates plus more square feet, railing and stairs per job.
Real-World Deck Costs in El Paso
Here's what common deck jobs cost in El Paso in 2026, footings, frame, decking, basic railing and hardware included.
12 × 16 pressure-treated deck, one step off the ground — 3 to 5 days
Six footings, a treated frame bolted to the house, 192 sq ft of 5/4 boards and a wood railing. Most El Paso decks on a one-story house land here; a dark stain, picture-frame border or a short stair run pushes the bill toward $10,000.
Same deck in composite with composite railing
The frame is still treated lumber; the boards and rails are composite. About $4,800 more than wood on a 12 × 16 in El Paso, and the saving is the stain job you never pay for: $320–$855 every two or three years on wood.
Replace a rotted 12 × 16 deck, like for like — 4 to 6 days
Tear-out and disposal ($545–$2,150) plus the new deck ($6,800 typical). Builders often find the ledger board or the rim joist rotted behind the old deck; budget for new flashing and a few feet of siding repair.
Walkout deck a story up, 12 × 16, with stairs — 1 to 2 weeks
Taller 6 × 6 posts, a bigger beam, 6 deeper footings and a flight of stairs ($470–$1,800). Elevated work adds $7–$27 a square foot in El Paso, and the city will want to see the ledger bolts and the guard height at inspection.
20 × 20 pressure-treated deck for a big backyard — 1 to 2 weeks
Twice the boards of a 12 × 16 but not twice the price: $13,150 typical against $6,800. The permit ($97–$755) is the same, and 9 footings instead of 6. Composite at this size runs $15,200–$29,600.
How much does a deck cost in El Paso?
A 12 × 16 pressure-treated deck in El Paso costs $4,550 to $10,000. The middle of the market, about $6,800, buys 6 poured footings, a 2 × 8 treated frame with joist hangers, 5/4 deck boards, a 36-inch wood railing and a permit pulled by the builder. Composite boards ($38–$74 a square foot) and stairs ($470–$1,800) are the common upgrades.
Bigger decks cost less per square foot. A 16 × 20 treated deck is $7,100–$15,900 and a 20 × 20 $9,000–$19,050, against $4,550–$10,000 for 12 × 16. In composite, a 12 × 16 runs $8,100–$16,200. Prices re-checked against 18 sources in November 2026.
Deck prices in El Paso (2026): by size, material and extras
A 12 × 16 pressure-treated deck costs $4,550–$10,000, the same deck in composite $8,100–$16,200, and a 20 × 20 wood deck $9,000–$19,050.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| 12 × 16 pressure-treated deck with railing | $4,550 | $6,800 | $10,000 |
| 12 × 16 composite deck with composite railing | $8,100 | $11,600 | $16,200 |
| 20 × 20 pressure-treated deck with railing | $9,000 | $13,150 | $19,050 |
| Composite decking, per sq ft installed | $38 | $54 | $74 |
| Deck stairs, one flight with handrail | $470 | $900 | $1,800 |
| Building permit | $97 | $330 | $755 |
| Tear out and haul away a 12 × 16 deck | $545 | $1,100 | $2,150 |
| Clean and stain a 12 × 16 deck | $320 | $510 | $855 |
Per square foot, the big deck wins: a 20 × 20 at $13,150 typical is $33 a square foot in El Paso, against $35 for a 12 × 16. Footings, the ledger, the permit and setup cost about the same whatever the size.
What moves a deck quote in El Paso:
- Boards — treated wood is $24–$50 a square foot installed; cedar $29–$55; composite $38–$74; PVC $43–$84. The frame underneath is treated lumber either way.
- Height — a deck more than 30 inches off the ground needs a 36-inch railing; a walkout a story up adds $7–$27 a square foot for posts, beams and stairs.
- Railing — about 40 linear ft on a 12 × 16: $920–$2,150 in wood, $1,700–$4,400 in aluminum, $2,300–$6,200 in composite, $3,900–$8,600 in cable.
- Footings and ground — $140–$355 a footing, 6 of them on a 12 × 16. Rock, roots, slopes and deep frost lines add digging time.
- Permit and tear-out — $97–$755 for the permit and inspections; $545–$2,150 to remove and dispose of the old deck first.
Ask every El Paso deck builder the same five things: the footing type and depth, how the ledger is bolted and flashed, the fastener hardware, whether stairs, railing, permit and disposal are in the price, and the board brand and line. Compare those, not the headline price. Get a quote for your deck job →
Deck Cost in El Paso by Size
12 × 16 ft (192 sq ft) in treated wood: $4,550–$10,000. 16 × 20 ft (320 sq ft): $7,100–$15,900. 20 × 20 ft (400 sq ft): $9,000–$19,050. In composite, a 12 × 16 is $8,100–$16,200 and a 20 × 20 about $15,200–$29,600.
Worked example: a El Paso 12 × 16 treated deck is about $6,800. Add a flight of stairs at $900, swap the wood rail for aluminum (about $1,350 more on 40 ft) and the job is roughly $9,050, about 33% more, which is why two quotes for the same deck can look nothing alike until you line up what each one includes.
Height matters more than the extra 8 feet of length: a 20 × 20 is $13,150 typical against $6,800 for a 12 × 16, but lifting that 12 × 16 a story up adds $1,350–$5,200 on its own for posts, beams, bracing and deeper footings, and the stairs on top.
El Paso Deck Costs by Material and Type
| Material or type | Cost | Best for |
|---|---|---|
| Pressure-treated wood deck | $24–$50 per sq ft | The cheapest deck to build. Needs cleaning and a stain or seal every 2–3 years ($320–$855 for a 12 × 16), lasts 10–25 years. |
| Cedar or redwood deck | $29–$55 per sq ft | Naturally rot-resistant, lighter and better looking than treated pine. Still needs staining; redwood is cheapest on the West Coast. |
| Ipe or tropical hardwood deck | $38–$74 per sq ft | Very dense and long-lived, but heavy, hard to cut and slow to install. Oil it yearly or let it silver. |
| Composite deck (Trex, TimberTech, Fiberon) | $38–$74 per sq ft | Wood-plastic boards on a treated frame. No staining, 25–50 year life; costs 40–80% more than wood up front. |
| PVC deck (AZEK, TimberTech Advanced PVC) | $43–$84 per sq ft | All-plastic boards: lightest, coolest underfoot, best for docks, pools and shade-free yards. The top of the price list. |
| Elevated or second-story deck | +$7–$27 per sq ft | Walkout and upper-floor decks need taller posts, bigger beams, stairs and often a structural review. Add this to any material above. |
| Deck railing | $23–$54 wood; $43–$110 aluminum; $58–$155 composite; $97–$215 cable, per linear ft | Required on any deck more than 30 in off the ground. A 12 × 16 attached deck has about 40 linear ft of it. |
| Stairs, footings and permit | $470–$1,800 per flight; $140–$355 per footing; $97–$755 permit | The lines a cheap quote leaves out. Footings must reach below the frost line; stairs need a handrail and their own footing. |
| Deck repair, staining and refinishing | $275–$2,200 repair; $320–$855 stain; $545–$1,550 sand and refinish | Keeping a wood deck alive. A full tear-out and haul-away is $545–$2,150 when repair stops making sense. |
| Covered deck, pergola or roof | $2,400–$9,150 pergola; $3,800–$12,700 roof over a 12 × 16 | Shade and rain cover. A roof ties into the house roof or wall and needs its own permit; a pergola is the cheaper, open version. |
Materials vs. labor — the El Paso deck bill
Materials for a 12 × 16 pressure-treated deck run $2,700–$5,400 at the lumber yard ($14–$28 a square foot for framing, boards, railing, hardware and concrete). The treated boards alone are $2–$5 a square foot; composite boards $5–$16. The rest of a $4,550–$10,000 job in El Paso is a two-person crew for three to five days, the permit, the dump run and the builder's overhead.
Labor is about half of a wood deck's price and less than half of a composite one, which is why composite prices differ less between cities than wood prices do. Where carpenters earn more, a wood deck costs more; the boards cost about the same in El Paso as anywhere else.
What's included in an El Paso deck quote (and what costs extra)
A standard 12 × 16 price covers layout, 6 footings, a treated frame bolted and flashed to the house, the decking, a 36-inch railing, hardware and cleanup. The headline price often leaves out:
- Stairs — $470–$1,800 per flight of 4–6 steps with handrail, plus a footing
- Permit and inspections — $97–$755, usually passed through at cost
- Tear-out of the old deck — $545–$2,150 for a 12 × 16, including the dump run
- Upgraded railing — aluminum $43–$110, composite $58–$155 or cable $97–$215 a linear foot instead of wood at $23–$54
Ask for the board brand and line, the footing type and depth, and the fastener hardware in writing, and for proof of liability insurance.
Size and shape
A 12 × 16 is $4,550–$10,000 in El Paso; a 16 × 20 $7,100–$15,900; a 20 × 20 $9,000–$19,050. Rectangles are cheapest. Angles, curves, a picture-frame border or a diagonal board pattern add 15–20% for cutting and waste.
Decking material
Per square foot installed: treated wood $24–$50, cedar or redwood $29–$55, tropical hardwood $38–$74, composite $38–$74, PVC $43–$84. Composite and PVC cost more now and nothing to stain later.
Height off the ground
Anything over 30 inches needs a 36-inch guard and, in practice, stairs. A deck a story up adds $7–$27 a square foot for 6 × 6 posts, a bigger beam, bracing and deeper footings — $5,900–$15,200 for a 12 × 16 in El Paso before the stairs.
Railing and stairs
Wood railing is $23–$54 a linear foot, aluminum $43–$110, composite $58–$155 and cable $97–$215. A flight of stairs with a handrail is $470–$1,800. Together they can be a third of the bill on a small deck.
Local rules and permits
Texas has no state license for general or deck contractors and no dollar limit, but most cities require contractors to register before pulling a permit, and an attached deck needs one.
Labor rates in El Paso
Carpenters in the El Paso, TX metro earn a median $42,430 a year in federal wage data, about 30% below the US median. Labor is about half of a wood deck, so El Paso prices land about 9% below the US typical of $7,500 for a 12 × 16.
Season and site
Spring and early summer are the busy months, when quotes run highest and good builders book out weeks ahead; fall and winter work can be 5–15% cheaper where the ground allows digging. A sloped yard, rock, tree roots or a backyard the crew can only reach through a gate adds 10–20% to labor.
- Keep it a rectangle, keep it low.A ground-hugging 12 × 16 rectangle is the cheapest deck in El Paso at $4,550–$10,000. Every angle, level change and foot of height adds cutting, posts and railing.
- Go bigger per square foot, not smaller.Footings, the ledger, the permit and setup cost about the same at any size, so a 20 × 20 ($33 a square foot) costs less per foot than a 12 × 16 ($35). Build the size you will actually use once.
- Book the off-season.Deck builders in El Paso are busiest from spring to early summer. Fall and winter slots, where the ground allows digging, run 5–15% cheaper and the deck is ready for the first warm weekend.
- Spend on the boards, save on the rail.Composite boards with an aluminum railing ($43–$110 a linear foot) cost less than matching composite rails ($58–$155) and look sharper. Wood railing ($23–$54) is cheapest but needs the most upkeep.
- Do the demolition and staining yourself.Tearing out an old deck is $545–$2,150 in El Paso and mostly labor and dump fees; cleaning and staining a new wood deck is $320–$855 every two or three years. Both are weekend jobs for a homeowner with a truck.
- Get the footings and hardware in writing.Two quotes can be $2,250 apart on the same deck because one uses precast blocks instead of $140–$355 poured footings, or nails instead of structural screws and hangers. Make both quotes name the footing type, depth and hardware.
El Paso deck builders quote by the job, usually from a drawing. Before you pay a deposit, get these in writing:
- The finished deck size and height off the ground, with a sketch showing stairs and railing runs
- Decking named by species or brand and line (5/4 treated pine, cedar, Trex Enhance, TimberTech Prime+), with the fastener type
- The frame: joist size and spacing, beam size, post size, and how the ledger is bolted and flashed to the house
- Footings: type, number and depth, and who digs if rock or roots turn up
- Railing material, height and style, and stairs as their own line with the number of steps
- Who pulls the permit, its cost, and that the price includes passing the inspections
- Old deck removal and disposal as its own line
- Start and finish dates, payment stages, the workmanship warranty, the board maker's warranty, and the builder's license or registration number and insurance
How much does it cost to build a deck in El Paso?
$4,550–$10,000 for a 12 × 16 pressure-treated deck attached to the house with railing, and $6,800 is typical. In composite the same deck is $8,100–$16,200.
How much is a deck per square foot in El Paso?
$24–$50 a square foot installed for treated wood, $29–$55 for cedar or redwood, $38–$74 for composite and $43–$84 for PVC. A deck a story up adds $7–$27 a square foot.
How much does a Trex or composite deck cost in El Paso?
$8,100–$16,200 for a 12 × 16 with composite railing, or $38–$74 a square foot installed. That is about $4,800 more than treated wood on a 12 × 16, with no staining afterward.
How much does a 20 × 20 deck cost in El Paso?
$9,000–$19,050 in pressure-treated wood with railing, and about $15,200–$29,600 in composite. A 16 × 20 is $7,100–$15,900.
Do I need a permit to build a deck in El Paso?
Almost always for an attached deck. Under the model code, only a deck of 200 sq ft or less, under 30 inches off the ground, not attached to the house and not at an exit door is exempt. A permit here runs $97–$755 and the builder normally pulls it. Texas has no state license for general or deck contractors and no dollar limit, but most cities require contractors to register before pulling a permit, and an attached deck needs one.
How much does it cost to replace a deck in El Paso?
$5,095–$12,150 for a 12 × 16 in treated wood: $545–$2,150 to tear out and haul away the old one, plus the new deck. In composite it is $8,645–$18,350.
How much do deck stairs and railing cost in El Paso?
A flight of 4–6 steps with handrail is $470–$1,800. Railing is $23–$54 a linear foot in treated wood, $43–$110 in aluminum, $58–$155 in composite and $97–$215 in cable; a 12 × 16 attached deck has about 40 ft.
How much does it cost to stain or repair a deck in El Paso?
Cleaning and staining a 12 × 16 deck is $320–$855; sanding and refinishing $545–$1,550. Small repairs — a few boards, a loose railing — run $275–$2,200, and a safety inspection $115–$385.
How long does it take to build a deck?
Three to five working days for a 12 × 16 deck on a one-story house once the permit is in hand, plus a day or two for the footing inspection to be scheduled. An elevated deck with stairs takes one to two weeks. Permit review adds anywhere from a day to several weeks depending on the city.
What's included in an El Paso deck quote?
Footings, the treated frame, decking, a 36-inch railing, hardware and cleanup. Often extra: stairs ($470–$1,800), the permit ($97–$755), tear-out of the old deck ($545–$2,150) and any railing upgrade.
Prices verified November 2026 · Cross-referenced against 18+ American pricing sources · See methodology
Prices for the El Paso metro area, November 2026. Outer suburbs may vary.
Get a fair deck quote in El Paso
Local deck builders · Free quotes · No obligation, no spam.