Retaining Wall Cost USA 2026
By Our research team · Last verified · 12 min read · Methodology
Retaining wall costs in the US
What most homeowners pay for retaining wall job, excavation, gravel base, drainage stone and pipe, backfill and cleanup included. Pick your city for local prices.
How we get this data- Typical
- $4,200
- Low end
- $1,200
- High end
- $12,000
A 4 ft high, 25 ft long segmental block retaining wall costs $2,500–$6,500 installed in the US in 2026, and most homeowners pay about $4,200 — roughly $34 a square foot of wall face. Treated timber is the cheap option at $15–$35 a square foot, poured concrete runs $25–$60 and natural stone $30–$90. Past 4 ft, a permit ($50–$450) and a design stamped by a licensed structural or civil engineer ($400–$2,500) join the bill.
$2,500–$6,500 to build a 4 ft × 25 ft segmental block retaining wall in the US — $4,200 typical, about $34 a square foot. Timber runs $1,900–$4,550 for the same wall, a 6 ft × 50 ft engineered wall $7,200–$18,700, and repairs $250–$1,500. Pick your city ↓
- Block wall, 4 ft × 25 ft, installed: $2,500–$6,500 ($4,200 typical)
- Per sq ft: timber $15–$35, block $20–$52, poured concrete $25–$60, stone $30–$90
- Per linear ft of block: $40–$104 at 2 ft, $80–$208 at 4 ft, $144–$374 at 6 ft
- Over 4 ft or holding a surcharge: permit $50–$450 + stamped design $400–$2,500
- Pick a city below for local prices across 195 US metros
Prices below come from national cost guides, 2026 platform data, dated contractor price pages, big-box material prices, block manufacturers' installation standards, city building codes and federal wage data for construction laborers, applied across 195 US metros and re-checked in November 2026. Installed prices include excavation, a compacted gravel base, drainage stone and pipe, backfill and cleanup; permits, designs, caps, steps and old-wall removal are their own rows. Pick your city for local pricing.
A short, low block wall in a cheap market with machine access can come in near $1,200; a 4 ft wall on a slope in a top-cost metro with a permit, a stamped design and an old wall to remove can reach $12,000. The block is the small part — $2–$10 a unit. Most of a quote is a crew's two or three days of digging, compacting, setting and backfilling, plus the machine and the disposal. The highest typical price on our city pages is Los Angeles ($4,850); the lowest is Huntsville ($3,750).
Prices verified November 2026 · Cross-referenced against 30+ American pricing sources · See methodology
Retaining wall cost by city
Typical retaining wall ranges, re-verified November 2026 across 30+ sources. Largest cities first.
Among the biggest metros, Los Angeles is the priciest at $4,850 and Atlanta the least at $4,000.
Half of the 195 metros we price sit between $4,000 and $4,450.
| City | Typical range |
|---|---|
| New York, NY | $2,800–$6,950 per wall |
| Los Angeles, CA | $2,900–$7,100 per wall |
| Chicago, IL | $2,800–$7,000 per wall |
| Dallas, TX | $2,400–$6,150 per wall |
| Houston, TX | $2,400–$6,150 per wall |
| Washington, DC | $2,600–$6,700 per wall |
| Atlanta, GA | $2,450–$6,200 per wall |
| Philadelphia, PA | $2,550–$6,550 per wall |
| Miami, FL | $2,500–$6,500 per wall |
| Phoenix, AZ | $2,500–$6,450 per wall |
| Boston, MA | $2,850–$7,050 per wall |
| San Francisco, CA | $2,800–$7,000 per wall |
| Riverside, CA | $2,700–$6,800 per wall |
| Detroit, MI | $2,550–$6,550 per wall |
| Seattle, WA | $2,750–$6,900 per wall |
| Minneapolis, MN | $2,750–$6,850 per wall |
| San Diego, CA | $2,750–$6,850 per wall |
| Tampa, FL | $2,450–$6,350 per wall |
| Orange County, CA | $2,750–$6,850 per wall |
| Denver, CO | $2,500–$6,500 per wall |
| Oakland, CA | $2,750–$6,850 per wall |
| Charlotte, NC | $2,450–$6,400 per wall |
| Baltimore, MD | $2,500–$6,500 per wall |
| St. Louis, MO | $2,700–$6,800 per wall |
| Orlando, FL | $2,450–$6,350 per wall |
| Brooklyn, NY | $2,750–$6,850 per wall |
| San Antonio, TX | $2,400–$6,100 per wall |
| Fort Worth, TX | $2,400–$6,100 per wall |
| Austin, TX | $2,400–$6,150 per wall |
| Portland, OR | $2,550–$6,600 per wall |
| Sacramento, CA | $2,750–$6,850 per wall |
| Pittsburgh, PA | $2,550–$6,550 per wall |
| Las Vegas, NV | $2,550–$6,550 per wall |
| Cincinnati, OH | $2,650–$6,750 per wall |
| Kansas City, MO | $2,700–$6,800 per wall |
| Columbus, OH | $2,650–$6,750 per wall |
| Newark, NJ | $2,800–$6,950 per wall |
| Nashville, TN | $2,500–$6,550 per wall |
| Indianapolis, IN | $2,550–$6,600 per wall |
| Cleveland, OH | $2,650–$6,750 per wall |
| San Jose, CA | $2,750–$6,850 per wall |
| Fort Lauderdale, FL | $2,450–$6,350 per wall |
| Virginia Beach, VA | $2,450–$6,250 per wall |
| Jacksonville, FL | $2,450–$6,250 per wall |
| Providence, RI | $2,650–$6,750 per wall |
| Milwaukee, WI | $2,650–$6,750 per wall |
| Raleigh, NC | $2,450–$6,400 per wall |
| Oklahoma City, OK | $2,400–$6,050 per wall |
| West Palm Beach, FL | $2,450–$6,250 per wall |
| New Orleans, LA | $2,400–$6,050 per wall |
| Memphis, TN | $2,500–$6,400 per wall |
| Richmond, VA | $2,450–$6,300 per wall |
| Louisville, KY | $2,500–$6,450 per wall |
| Salt Lake City, UT | $2,500–$6,450 per wall |
| Hartford, CT | $2,650–$6,750 per wall |
| Birmingham, AL | $2,350–$5,900 per wall |
| Buffalo, NY | $2,650–$6,700 per wall |
| Rochester, NY | $2,650–$6,700 per wall |
| Grand Rapids, MI | $2,500–$6,500 per wall |
| Tucson, AZ | $2,500–$6,400 per wall |
| Honolulu, HI | $2,900–$7,100 per wall |
| Tulsa, OK | $2,400–$6,050 per wall |
| Fresno, CA | $2,700–$6,800 per wall |
| Omaha, NE | $2,500–$6,450 per wall |
| St. Petersburg, FL | $2,450–$6,250 per wall |
| Worcester, MA | $2,700–$6,850 per wall |
| Bridgeport, CT | $2,650–$6,750 per wall |
| Greenville, SC | $2,400–$6,150 per wall |
| Tacoma, WA | $2,650–$6,750 per wall |
| Albuquerque, NM | $2,400–$6,000 per wall |
| Bakersfield, CA | $2,650–$6,750 per wall |
| Albany, NY | $2,650–$6,700 per wall |
| Knoxville, TN | $2,450–$6,300 per wall |
| McAllen, TX | $2,400–$6,000 per wall |
| Baton Rouge, LA | $2,400–$5,950 per wall |
| El Paso, TX | $2,400–$6,000 per wall |
| Sarasota, FL | $2,450–$6,200 per wall |
| New Haven, CT | $2,650–$6,700 per wall |
| Columbia, SC | $2,450–$6,200 per wall |
| Oxnard, CA | $2,650–$6,750 per wall |
| Charleston, SC | $2,450–$6,200 per wall |
| Dayton, OH | $2,600–$6,650 per wall |
| Boise, ID | $2,450–$6,350 per wall |
| Fort Myers, FL | $2,450–$6,200 per wall |
| Stockton, CA | $2,650–$6,750 per wall |
| Greensboro, NC | $2,450–$6,250 per wall |
| Lakeland, FL | $2,450–$6,200 per wall |
| Colorado Springs, CO | $2,450–$6,400 per wall |
| Little Rock, AR | $2,350–$5,850 per wall |
| Des Moines, IA | $2,500–$6,400 per wall |
| Wilmington, DE | $2,450–$6,250 per wall |
| Akron, OH | $2,600–$6,650 per wall |
| Daytona Beach, FL | $2,450–$6,200 per wall |
| Provo, UT | $2,450–$6,300 per wall |
| Springfield, MA | $2,700–$6,850 per wall |
| Ogden, UT | $2,450–$6,300 per wall |
| Winston-Salem, NC | $2,450–$6,250 per wall |
| Madison, WI | $2,600–$6,650 per wall |
| Syracuse, NY | $2,600–$6,650 per wall |
| Durham, NC | $2,450–$6,300 per wall |
| Wichita, KS | $2,450–$6,250 per wall |
| Toledo, OH | $2,600–$6,650 per wall |
| Augusta, GA | $2,350–$5,950 per wall |
| Palm Bay, FL | $2,450–$6,200 per wall |
| Jackson, MS | $2,350–$5,900 per wall |
| Harrisburg, PA | $2,500–$6,450 per wall |
| Spokane, WA | $2,650–$6,700 per wall |
| Chattanooga, TN | $2,450–$6,250 per wall |
| Fayetteville, AR | $2,350–$5,850 per wall |
| Scranton, PA | $2,500–$6,450 per wall |
| Portland, ME | $2,450–$6,300 per wall |
| Modesto, CA | $2,650–$6,750 per wall |
| Lansing, MI | $2,500–$6,450 per wall |
| Youngstown, OH | $2,600–$6,650 per wall |
| Fayetteville, NC | $2,450–$6,250 per wall |
| Lexington, KY | $2,450–$6,300 per wall |
| Huntsville, AL | $2,350–$5,850 per wall |
| Pensacola, FL | $2,450–$6,200 per wall |
| Myrtle Beach, SC | $2,400–$6,150 per wall |
| Mesa, AZ | $2,500–$6,400 per wall |
| Reno, NV | $2,500–$6,450 per wall |
| Springfield, MO | $2,600–$6,650 per wall |
| Santa Rosa, CA | $2,650–$6,750 per wall |
| Asheville, NC | $2,450–$6,250 per wall |
| Killeen, TX | $2,400–$6,000 per wall |
| Visalia, CA | $2,650–$6,750 per wall |
| Lafayette, LA | $2,350–$5,900 per wall |
| Long Beach, CA | $2,750–$6,850 per wall |
| Santa Barbara, CA | $2,650–$6,750 per wall |
| Salinas, CA | $2,650–$6,750 per wall |
| Mobile, AL | $2,350–$5,850 per wall |
| Corpus Christi, TX | $2,400–$6,000 per wall |
| Manchester, NH | $2,500–$6,500 per wall |
| Salem, OR | $2,500–$6,500 per wall |
| Fort Wayne, IN | $2,500–$6,500 per wall |
| Brownsville, TX | $2,400–$6,000 per wall |
| Gulfport, MS | $2,350–$5,900 per wall |
| Appleton, WI | $2,600–$6,650 per wall |
| Savannah, GA | $2,350–$5,950 per wall |
| Anchorage, AK | $2,650–$6,700 per wall |
| Beaumont, TX | $2,400–$6,000 per wall |
| Flint, MI | $2,500–$6,450 per wall |
| Peoria, IL | $2,700–$6,750 per wall |
| Canton, OH | $2,600–$6,650 per wall |
| Arlington, TX | $2,400–$6,100 per wall |
| Shreveport, LA | $2,350–$5,900 per wall |
| Tallahassee, FL | $2,450–$6,200 per wall |
| Montgomery, AL | $2,350–$5,850 per wall |
| Trenton, NJ | $2,750–$6,850 per wall |
| Eugene, OR | $2,500–$6,500 per wall |
| Davenport, IA | $2,500–$6,400 per wall |
| Ann Arbor, MI | $2,500–$6,450 per wall |
| Fort Collins, CO | $2,450–$6,400 per wall |
| Gainesville, FL | $2,450–$6,200 per wall |
| Lincoln, NE | $2,450–$6,350 per wall |
| Rockford, IL | $2,700–$6,750 per wall |
| Lubbock, TX | $2,400–$6,000 per wall |
| Columbus, GA | $2,350–$5,950 per wall |
| Boulder, CO | $2,450–$6,400 per wall |
| Green Bay, WI | $2,600–$6,650 per wall |
| Evansville, IN | $2,500–$6,500 per wall |
| South Bend, IN | $2,500–$6,500 per wall |
| Roanoke, VA | $2,400–$6,150 per wall |
| Sioux Falls, SD | $2,450–$6,300 per wall |
| Wilmington, NC | $2,450–$6,250 per wall |
| Stamford, CT | $2,650–$6,750 per wall |
| Waco, TX | $2,400–$6,000 per wall |
| Jersey City, NJ | $2,800–$6,950 per wall |
| Duluth, MN | $2,650–$6,750 per wall |
| Laredo, TX | $2,400–$6,000 per wall |
| Cedar Rapids, IA | $2,500–$6,400 per wall |
| Tuscaloosa, AL | $2,350–$5,850 per wall |
| Amarillo, TX | $2,400–$6,000 per wall |
| Erie, PA | $2,500–$6,450 per wall |
| Atlantic City, NJ | $2,750–$6,850 per wall |
| Fargo, ND | $2,500–$6,450 per wall |
| Charleston, WV | $2,400–$6,150 per wall |
| Norfolk, VA | $2,450–$6,250 per wall |
| Macon, GA | $2,350–$5,950 per wall |
| Champaign, IL | $2,700–$6,750 per wall |
| Burlington, VT | $2,500–$6,400 per wall |
| Topeka, KS | $2,450–$6,250 per wall |
| Rochester, MN | $2,650–$6,750 per wall |
| Athens, GA | $2,350–$5,950 per wall |
| Las Cruces, NM | $2,350–$5,900 per wall |
| Columbia, MO | $2,600–$6,650 per wall |
| St. George, UT | $2,450–$6,300 per wall |
| Hilo, HI | $2,800–$6,950 per wall |
| Billings, MT | $2,500–$6,450 per wall |
| Greenville, NC | $2,450–$6,250 per wall |
| Hattiesburg, MS | $2,350–$5,900 per wall |
| Santa Fe, NM | $2,350–$5,900 per wall |
| Missoula, MT | $2,500–$6,450 per wall |
| Cheyenne, WY | $2,450–$6,300 per wall |
| Fairbanks, AK | $2,650–$6,700 per wall |
Each city page has local rates by area, real-world retaining wall construction costs and a city-specific FAQ. Prices shown are the low end of the typical range, per wall.
Alabama
- Birminghamfrom $2,350
- Huntsvillefrom $2,350
- Mobilefrom $2,350
- Montgomeryfrom $2,350
- Tuscaloosafrom $2,350
Arkansas
- Little Rockfrom $2,350
- Fayettevillefrom $2,350
California
- Los Angelesfrom $2,900
- San Franciscofrom $2,800
- Riversidefrom $2,700
- San Diegofrom $2,750
- Orange Countyfrom $2,750
- Oaklandfrom $2,750
- Sacramentofrom $2,750
- San Josefrom $2,750
- Fresnofrom $2,700
- Bakersfieldfrom $2,650
- Oxnardfrom $2,650
- Stocktonfrom $2,650
- Modestofrom $2,650
- Santa Rosafrom $2,650
- Visaliafrom $2,650
- Long Beachfrom $2,750
- Santa Barbarafrom $2,650
- Salinasfrom $2,650
Colorado
- Denverfrom $2,500
- Colorado Springsfrom $2,450
- Fort Collinsfrom $2,450
- Boulderfrom $2,450
Connecticut
- Hartfordfrom $2,650
- Bridgeportfrom $2,650
- New Havenfrom $2,650
- Stamfordfrom $2,650
Delaware
- Wilmingtonfrom $2,450
District of Columbia
- Washingtonfrom $2,600
Florida
- Miamifrom $2,500
- Tampafrom $2,450
- Orlandofrom $2,450
- Fort Lauderdalefrom $2,450
- Jacksonvillefrom $2,450
- West Palm Beachfrom $2,450
- St. Petersburgfrom $2,450
- Sarasotafrom $2,450
- Fort Myersfrom $2,450
- Lakelandfrom $2,450
- Daytona Beachfrom $2,450
- Palm Bayfrom $2,450
- Pensacolafrom $2,450
- Tallahasseefrom $2,450
- Gainesvillefrom $2,450
Georgia
Idaho
- Boisefrom $2,450
Indiana
- Indianapolisfrom $2,550
- Fort Waynefrom $2,500
- Evansvillefrom $2,500
- South Bendfrom $2,500
Iowa
- Des Moinesfrom $2,500
- Davenportfrom $2,500
- Cedar Rapidsfrom $2,500
Kentucky
- Louisvillefrom $2,500
- Lexingtonfrom $2,450
Louisiana
- New Orleansfrom $2,400
- Baton Rougefrom $2,400
- Lafayettefrom $2,350
- Shreveportfrom $2,350
Maine
- Portlandfrom $2,450
Maryland
- Baltimorefrom $2,500
Massachusetts
- Bostonfrom $2,850
- Worcesterfrom $2,700
- Springfieldfrom $2,700
Michigan
- Detroitfrom $2,550
- Grand Rapidsfrom $2,500
- Lansingfrom $2,500
- Flintfrom $2,500
- Ann Arborfrom $2,500
Minnesota
- Minneapolisfrom $2,750
- Duluthfrom $2,650
- Rochesterfrom $2,650
Mississippi
- Jacksonfrom $2,350
- Gulfportfrom $2,350
- Hattiesburgfrom $2,350
Missouri
- St. Louisfrom $2,700
- Kansas Cityfrom $2,700
- Springfieldfrom $2,600
- Columbiafrom $2,600
New Hampshire
- Manchesterfrom $2,500
New Jersey
- Newarkfrom $2,800
- Trentonfrom $2,750
- Jersey Cityfrom $2,800
- Atlantic Cityfrom $2,750
New Mexico
- Albuquerquefrom $2,400
- Las Crucesfrom $2,350
- Santa Fefrom $2,350
New York
North Carolina
- Charlottefrom $2,450
- Raleighfrom $2,450
- Greensborofrom $2,450
- Winston-Salemfrom $2,450
- Durhamfrom $2,450
- Fayettevillefrom $2,450
- Ashevillefrom $2,450
- Wilmingtonfrom $2,450
- Greenvillefrom $2,450
North Dakota
- Fargofrom $2,500
Ohio
- Cincinnatifrom $2,650
- Columbusfrom $2,650
- Clevelandfrom $2,650
- Daytonfrom $2,600
- Akronfrom $2,600
- Toledofrom $2,600
- Youngstownfrom $2,600
- Cantonfrom $2,600
Oklahoma
- Oklahoma Cityfrom $2,400
- Tulsafrom $2,400
Pennsylvania
- Philadelphiafrom $2,550
- Pittsburghfrom $2,550
- Harrisburgfrom $2,500
- Scrantonfrom $2,500
- Eriefrom $2,500
Rhode Island
- Providencefrom $2,650
South Carolina
- Greenvillefrom $2,400
- Columbiafrom $2,450
- Charlestonfrom $2,450
- Myrtle Beachfrom $2,400
South Dakota
- Sioux Fallsfrom $2,450
Tennessee
- Nashvillefrom $2,500
- Memphisfrom $2,500
- Knoxvillefrom $2,450
- Chattanoogafrom $2,450
Texas
- Dallasfrom $2,400
- Houstonfrom $2,400
- San Antoniofrom $2,400
- Fort Worthfrom $2,400
- Austinfrom $2,400
- McAllenfrom $2,400
- El Pasofrom $2,400
- Killeenfrom $2,400
- Corpus Christifrom $2,400
- Brownsvillefrom $2,400
- Beaumontfrom $2,400
- Arlingtonfrom $2,400
- Lubbockfrom $2,400
- Wacofrom $2,400
- Laredofrom $2,400
- Amarillofrom $2,400
Utah
- Salt Lake Cityfrom $2,500
- Provofrom $2,450
- Ogdenfrom $2,450
- St. Georgefrom $2,450
Vermont
- Burlingtonfrom $2,500
Virginia
- Virginia Beachfrom $2,450
- Richmondfrom $2,450
- Roanokefrom $2,400
- Norfolkfrom $2,450
West Virginia
- Charlestonfrom $2,400
Wyoming
- Cheyennefrom $2,450
Retaining wall prices, 2026
| Job | Low | Typical | High |
|---|---|---|---|
| Segmental block retaining wall, 4 ft high × 25 ft long (100 sq ft), installedper wall | $2,500 | $4,200 | $6,500 |
| Pressure-treated timber wall, 4 ft high × 25 ft long, installedper wall | $1,900 | $3,150 | $4,550 |
| Small garden wall, 2 ft high × 20 ft long, block (40 sq ft)per wall | $1,150 | $1,900 | $3,000 |
| Large wall, 6 ft high × 50 ft long, geogrid-reinforced block (300 sq ft), engineeredper wall | $7,200 | $12,250 | $18,700 |
| Segmental (interlocking) concrete block, per sq ft of wall face, installedper sq ft | $20 | $34 | $52 |
| Pressure-treated timber (6×6) wall, per sq ft, installedper sq ft | $15 | $25 | $35 |
| Poured reinforced concrete wall, per sq ft, installedper sq ft | $25 | $40 | $60 |
| Mortared concrete block (CMU) wall on a footing, per sq ft, installedper sq ft | $20 | $30 | $45 |
| Natural stone wall (dry-stack or mortared), per sq ft, installedper sq ft | $30 | $55 | $90 |
| Boulder (rock) wall, per sq ft, installedper sq ft | $25 | $38 | $50 |
| Gabion (wire basket and rock) wall, per sq ft, installedper sq ft | $15 | $28 | $40 |
| Block wall, 2 ft high, per linear ft, installedper linear ft | $40 | $68 | $104 |
| Block wall, 4 ft high, per linear ft, installedper linear ft | $80 | $136 | $208 |
| Block wall, 6 ft high with geogrid (engineered), per linear ft, installedper linear ft | $144 | $245 | $374 |
| Stamped design by a licensed structural or civil engineer (walls over 4 ft or holding a surcharge)per wall | $400 | $1,000 | $2,500 |
| Geotechnical (soils) report, where the city asks for oneper report | $800 | $1,800 | $3,500 |
| Building permit for a retaining wall (where required)per permit | $50 | $200 | $450 |
| Drainage behind a new wall (perforated pipe, drainage stone, fabric), per linear ftper linear ft | $10 | $20 | $30 |
| Excavation and site prep, per cubic yard removedper cu yd | $50 | $125 | $225 |
| Cap blocks or coping on top of the wall, per linear ftper linear ft | $10 | $25 | $50 |
| Steps built into the wall (3-5 risers), blockper set | $400 | $1,200 | $2,500 |
| Repair a failing section (re-set leaning blocks, fix drainage, cracks)per job | $250 | $700 | $1,500 |
| Tear out and rebuild a failed wall, per sq ft (demolition, haul-away, new wall)per sq ft | $30 | $50 | $70 |
| Remove an old wall and haul it away, per sq ftper sq ft | $10 | $15 | $25 |
Prices verified November 2026 · Cross-referenced against 30+ American pricing sources · See methodology
National average prices. Select a city above for location-specific pricing.
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local retaining wall contractors
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What kind of retaining wall do you need?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the retaining wall contractors who reply.
Where should they text you?
- Max 2 retaining wall contractors. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched retaining wall contractors see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 retaining wall contractors about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Block, Timber, Concrete, Stone: Retaining Wall Costs by Material and Height
Block is $20–$52 a square foot installed, timber $15–$35, poured concrete $25–$60 and stone $30–$90. Per linear foot of block: $40–$104 at 2 ft, $80–$208 at 4 ft and $144–$374 at 6 ft with geogrid.
| Material or height | Cost | Best for |
|---|---|---|
| Segmental (interlocking) concrete block | $20–$52 per sq ft | The standard residential wall: dry-stacked on a gravel base, no mortar or footing. Lasts 50+ years; geogrid takes it past 4 ft. |
| Pressure-treated timber (6 × 6) | $15–$35 per sq ft | The cheapest wall to build and the shortest-lived: 10–40 years before rot sets in, less in wet ground. |
| Poured reinforced concrete | $25–$60 per sq ft | Tall walls, tight sites, driveways and anything holding a load. Needs forms, rebar and a footing below frost; can be faced with veneer. |
| Mortared concrete block (CMU) on a footing | $20–$45 per sq ft | Grouted, rebar-reinforced block on a poured footing, usually stuccoed or veneered. Common in California and the Southwest. |
| Natural stone | $30–$90 per sq ft | Looks, longevity (50–200 years) and the most skilled labor. Dry-stack fieldstone sits at the low end; cut, mortared stone at the top. |
| Boulder (rock) wall | $25–$50 per sq ft | Big landscape walls where a machine can set 1–3 ft rocks. Cheap per square foot where rock is local; needs room to work. |
| Gabion (wire baskets filled with rock) | $15–$40 per sq ft | Drains through itself, so no pipe behind it. Industrial look; good on creek banks and long low slopes. |
| Block wall, 2 ft high | $40–$104 per linear ft | Garden beds and grade changes under 2 ft: no permit almost anywhere, often a weekend DIY job. |
| Block wall, 4 ft high | $80–$208 per linear ft | The most common height. Right at the permit line in most cities (measured from the bottom of the base), so check before you dig. |
| Block wall, 6 ft high, geogrid-reinforced | $144–$374 per linear ft | Needs a permit, a stamped design and geogrid layers tied back into the soil. Many cities would rather see two 3 ft terraces. |
| Repair a failing wall | $250–$1,500 per job | Leaning blocks re-set, a drain added, cracks filled. Worth it when the base is sound; a bulge low down usually means a rebuild. |
| Tear out and rebuild | $30–$70 per sq ft | Walls that have moved more than a few inches, timber that has rotted through, or any wall with no drainage behind it. |
Material sets the per-square-foot price; height sets everything else. Under 4 ft (from the bottom of the base) a wall holding level ground is a landscaping job in most cities. Over it — or with a slope, driveway or building above — it is a permitted structure with a stamped design, geogrid or rebar, inspections and a price per linear foot that climbs faster than the wall does.
Common Retaining Wall Jobs and What They Cost (2026)
The standard wall costs $2,500–$6,500 and takes two to three days. A garden wall is a day; a tall reinforced wall one to two weeks plus permit time. Time on site is in brackets.
| Block or rate | Low | Typical | High |
|---|---|---|---|
| Garden wall, 2 ft × 20 ft, block (1 day) | $1,150 | $1,900 | $3,000 |
| Standard wall, 4 ft × 25 ft, block (2–3 days) | $2,500 | $4,200 | $6,500 |
| Same wall in pressure-treated timber (2 days) | $1,900 | $3,150 | $4,550 |
| Same wall in poured reinforced concrete (3–5 days incl. curing) | $3,000 | $4,800 | $7,300 |
| Same wall in natural stone (3–6 days) | $3,500 | $6,300 | $10,300 |
| Standard wall with permit and stamped design (adds 2–6 weeks of review) | $2,950 | $5,400 | $9,450 |
| Standard wall with caps and drainage priced as lines | $3,000 | $5,325 | $8,500 |
| Tall wall, 6 ft × 50 ft, geogrid-reinforced block, engineered (1–2 weeks) | $7,200 | $12,250 | $18,700 |
| Drainage behind a 25 ft wall: pipe, stone, fabric (part of a day) | $250 | $500 | $750 |
| Cap course on a 25 ft wall (half a day) | $250 | $625 | $1,250 |
| Steps built into the wall, 3–5 risers (1 day) | $400 | $1,200 | $2,500 |
| Remove an old 4 ft × 25 ft wall and haul it away (1 day) | $1,000 | $1,500 | $2,500 |
| Replace a rotted timber wall with block, 4 ft × 25 ft (3–4 days) | $3,500 | $5,700 | $9,000 |
| Repair a failing section: re-set, drain, re-point (1 day) | $250 | $700 | $1,500 |
| Geotechnical report, where the city asks for one (1–3 weeks) | $800 | $1,800 | $3,500 |
| Stamped design by a licensed structural or civil engineer (1–3 weeks) | $400 | $1,000 | $2,500 |
What moves these prices: height and the 4 ft permit line, material, what sits above the wall, access for a machine, the slope, your city's labor rates and whether an old wall has to come out first. Crews bill $50–$100 an hour when they work by the hour; most walls are quoted flat.
Timber vs Block vs Poured Concrete: What Each Costs and Why
For a 4 ft × 25 ft wall, timber is $3,150 typical, segmental block $4,200 and poured reinforced concrete $4,800. Same hole in the ground, three very different walls.
| Factor | Pressure-treated timber | Segmental block | Poured concrete |
|---|---|---|---|
| Typical price, 4 ft × 25 ft | $3,150 | $4,200 | $4,800 |
| Usual range | $1,900–$4,550 | $2,500–$6,500 | $3,000–$7,300 |
| Per square foot | $15–$35 | $20–$52 | $25–$60 |
| Lifespan | 10–40 years; rots at posts and base | 50–100 years | 50–100 years |
| Base and footing | Gravel base; posts set in concrete or deadmen tied back | 6 in. compacted gravel; no footing; geogrid over 3–4 ft | Footing below frost, $30–$100/ft, plus rebar $1–$5/sq ft |
| Max height before a design is normal | About 4 ft | About 4 ft (geogrid to 6 ft and beyond with a design) | Any height with a design; the choice for tall or loaded walls |
| Time on site | 1–2 days | 2–3 days | 3–5 days plus curing |
| Watch out for | No deadmen, untreated cut ends, creosote ties near gardens | Thin base, no drainage stone, no geogrid on a tall wall | No weep holes or waterproofing, footing above frost, no rebar |
Block is the default for a reason: $20–$52 a square foot, no footing, and it lasts. Timber is for budgets and short horizons; poured concrete for height, surcharges and tight sites. Whichever you pick, the drainage stone and pipe behind it ($10–$30 a linear foot) are not optional.
Upkeep, Inspection and Cost per Year of a Retaining Wall
A well-built block wall needs almost nothing: an inspection every few years ($150–$300) and a clear drain outlet. Spread over its life, the standard block wall costs about $55 a year and the same wall in timber $125.
| Item | Low | Typical | High |
|---|---|---|---|
| Inspection, every 3–5 years | $150 | $225 | $300 |
| Repair a failing section | $250 | $700 | $1,500 |
| Add drainage to an existing wall, per linear ft | $60 | $65 | $70 |
| Seal or waterproof the back of a wall, per sq ft | $2 | $6 | $10 |
| Structural or civil engineer, per hour | $100 | $150 | $220 |
| Block wall, 4 ft × 25 ft, spread over 100 / 75 / 50 years | $25 | $55 | $130 |
| Timber wall, 4 ft × 25 ft, spread over 40 / 25 / 10 years | $50 | $125 | $455 |
| Tear out and rebuild a failed wall, per sq ft | $30 | $50 | $70 |
Cost per year = the job price ($2,500, $4,200 and $6,500 for block; $1,900, $3,150 and $4,550 for timber) divided by a long, middle and short life. Drainage decides which end a wall lands on. Keep the pipe outlet clear, keep sprinklers and downspouts from soaking the backfill, and keep anything heavy — a shed, a parked car — back from the top.
What affects retaining wall costs
Height and the 4 ft line
Per linear foot of block: $40–$104 at 2 ft, $80–$208 at 4 ft, $144–$374 at 6 ft with geogrid. Past 4 ft from the bottom of the footing, add the permit ($50–$450) and the stamped design ($400–$2,500).
Material
Timber $15–$35, gabion $15–$40, block $20–$52, boulder $25–$50, poured concrete $25–$60, natural stone $30–$90 per square foot. Timber is cheapest to build and shortest-lived.
What sits above the wall
A slope, driveway, patio, shed or second wall close behind is a surcharge. It needs a stronger design and usually a permit at any height, and it is the detail cheap quotes ignore.
Access and slope
A flat yard a skid steer can reach is the low end. Wheelbarrow access or a steep slope adds 50% or more to labor; an old wall to remove adds $10–$25 a square foot.
Your city
Labor is about 60% of a block-wall bill and follows local pay. Los Angeles ($4,850 typical) sits at the top of our city pages and Huntsville ($3,750) at the bottom, against the US typical of $4,200. Construction laborers' median pay runs from under $37,000 a year in Alabama to over $60,000 in California, Illinois, Minnesota, Massachusetts and New Jersey.
Drainage and soil
Clay, fill and wet ground mean over-excavation, more stone and sometimes a geotechnical report ($800–$3,500). Drainage behind a new wall is $10–$30 a linear foot and is the one line you never cut.
How to save on retaining wall
- Stay under the permit line.Keep the wall under 4 ft from the bottom of the base with level ground above it, or build two short terraces, and skip $50–$450 of permit and $400–$2,500 of design.
- Choose block over poured concrete where it works.Block at $20–$52 a square foot needs no forms or footing and lasts as long as concrete at $25–$60 on walls under 6 ft.
- Demolish the old wall yourself.Pulling out rotted timbers and stacking them for pickup saves $10–$25 a square foot — $1,000–$2,500 on a 4 ft × 25 ft wall.
- Bundle with other hardscape.A crew with the skid steer already on site can add steps, a patio edge or a second terrace far cheaper than a separate visit.
- Book late fall.Spring is the rush. Before the ground freezes in the North, or in the cooler months in the South, crews have open weeks and sharper prices.
- Pay for the base and drainage, not for a rebuild.Drainage is $250–$750 on a 25 ft wall; a wall built without it is rebuilt at $30–$70 a square foot. The cheapest wall is the one you build once.
Get two real quotes
Local retaining wall contractors · free · max 2 will contact you · no spam.
Retaining Wall Cost by Size
Garden wall, 2 ft × 20 ft: $1,150–$3,000. Standard wall, 4 ft × 25 ft: $2,500–$6,500. Tall wall, 6 ft × 50 ft, geogrid-reinforced and engineered: $7,200–$18,700. Per linear foot of block: $40–$104 at 2 ft, $80–$208 at 4 ft, $144–$374 at 6 ft.
Worked example: a 25 ft grade change of about 4 ft can be one 4 ft block wall at $4,200 typical, or two 2 ft terraces — 50 linear feet at $68 a foot, about $3,400 — with planting between them and no permit or design. The terraces cost less up front and avoid the $1,200 of permit and design the single wall risks if it measures over the line.
Length is cheap and height is dear. Doubling the standard wall to 50 ft roughly doubles the price to about $6,800; raising it to 6 ft instead takes 50 feet to $12,250, a 80% premium for two more feet, because of geogrid, the deeper base, the permit, the design and the inspections.
What a retaining wall quote should include
A real retaining wall quote answers all of these. If it answers fewer than seven, ask before you pay a deposit.
- Length and finished height, and where the height is measured from (bottom of base to top of wall)
- The material on its own line — block brand and size, timber grade, concrete strength and rebar
- Excavation, spoil haul-away and backfill, with the base trench width and gravel depth stated
- Drainage: perforated pipe, drainage stone width, filter fabric, and where the pipe outlets
- Geogrid layers and spacing on any wall over 3–4 ft, or the footing on a poured or mortared wall
- Who pulls the permit and pays for the stamped design, and whether a soils report is needed
- Old wall removal and disposal, included or listed
- Caps, steps, lighting and any fence or railing on top, each priced
- Proof of liability insurance, the contractor license number where your state has one, warranty, dates and payment stages
The 4 ft rule, city by city: when a retaining wall needs a permit and a stamped design
Most US cities exempt a retaining wall of 4 ft or less, measured from the bottom of the footing, that holds only level ground. Cross the line — or put a slope, driveway or building above the wall — and the permit ($50–$450) and a design by a licensed structural or civil engineer ($400–$2,500) come into the price, taking a $4,200 wall to about $5,400.
| City or code | Permit line | How height is measured | What else the rule says |
|---|---|---|---|
| Model residential code (IRC R105.2), adopted in most states | Exempt up to 4 ft | Bottom of footing to top of wall | Not exempt if the wall supports a surcharge (slope, driveway, structure); taller walls must be designed to a 1.5 safety factor |
| Boise, ID (city code 9-1B-8) | Exempt up to 4 ft | Bottom of footing to top of wall | Not exempt if supporting a surcharge; fences up to 7 ft exempt |
| Seattle, WA (SDCI) | Exempt up to 4 ft | Bottom of footing, even if below grade | No exemption on a parcel with an environmentally critical area; rockeries designed by a geotechnical engineer or built to prescriptive standards; a grading permit may also apply |
| Los Angeles, CA (LADBS P/BC 2026-002) | Standard low walls built to city details need no permit | Per the city's standard drawings; 30 in. max where a walkway is behind the wall | Only where ground below and above is flatter than 1 in 5 (20%); footing 12 in. into natural ground; drainage to the street; wood, rubble and stacked-block walls need an approved research report |
From the model residential code and the cities' own building-department pages and code amendments (sources in our research notes), read in October–November 2026. Rules change and counties differ from cities; confirm with your building department before you dig. Not legal advice.
The line comes from the model residential code that most states adopt: work exempt from a permit includes retaining walls that are not over 4 feet in height measured from the bottom of the footing to the top of the wall, unless supporting a surcharge. Cities copy it, amend it, or tighten it. Boise's municipal code repeats it word for word. Seattle uses the same 4 ft from the bottom of the footing, requires rockery designs from a geotechnical engineer or built to its prescriptive standards, and exempts nothing on a parcel with an environmentally critical area. Los Angeles handles it with standard drawings: a low wall built to the city's details with ground above and below flatter than 1 in 5 needs no permit, and anything steeper or taller does.
What the rule does to the price: the permit is the small part at $50–$450; the design is $400–$2,500, a soils report where asked $800–$3,500, and the wall itself gets geogrid, a wider base and inspections. That is why our 6 ft block row is $144–$374 a linear foot against $80–$208 at 4 ft, and why two terraces at $2,000–$5,200 for 50 ft often cost less than one tall wall.
- Measure from the bottom of the base, not the lawn: a 3 ft 6 in. wall with a buried course can be a 4 ft 2 in. wall to the inspector
- A slope, driveway, patio, shed or second wall within a few feet of the top is a surcharge — permit and design at any height in most cities
- Moving more than a set volume of soil can need a separate grading permit even when the wall does not
- Property-line walls: a survey ($200–$1,200 in the cost guides) is cheaper than moving a wall
- Ask the contractor who pulls the permit and whether the price includes the inspections
If a contractor says a 5 ft wall needs no permit anywhere in the country, get another contractor.
What a retaining wall should sit on and drain through — the numbers a quote should match
A block wall that lasts sits on at least 6 inches of compacted gravel with 12 inches of drainage stone behind it and a perforated pipe at the base. Priced as lines, drainage is $10–$30 a linear foot ($250–$750 on a 25 ft wall) and excavation $50–$225 a cubic yard. Skipping them is how a $4,200 wall becomes a $3,000–$7,000 rebuild.
| Item | Standard for a segmental block wall | Why it matters | If it is missing from the quote |
|---|---|---|---|
| Base trench | 18 in. wide for walls under 4 ft, 24 in. for taller; 6 in. deep plus 1 in. per foot of wall height | Spreads the load; gets the first course below frost heave and erosion | Wall settles and tips within a few seasons |
| Gravel base | At least 6 in. of compacted crushed stone, two passes with a plate compactor | The only thing holding the first course level | Courses go out of level; lean starts at the base |
| Buried course | First course set below grade, part of the trench depth | Keeps the toe from kicking out | Bottom course slides forward |
| Wall rock | 12 in. of clean, free-draining stone behind the block and in the cores | Lets water fall to the pipe instead of pushing on the wall | Water pressure and frost push the wall out |
| Drain pipe | Perforated pipe at the base, outlet to daylight every 50 ft; required on any reinforced wall, any gravity wall over 4 ft and any poorly draining site | Gets the water out | The classic failure: wet, leaning, white-stained wall |
| Filter fabric | Between the drainage stone and the soil | Keeps soil from clogging the stone and pipe | Drainage stops working in a few years |
| Backfill | Compacted in lifts of 8 in. or less, two passes each | Stops settling behind the wall | Sinkholes and gaps behind the wall; patio above cracks |
| Geogrid | Every other course on walls over about 3–4 ft, run back into the fill per the design | Ties the wall to the soil it holds | Tall wall bows and overturns |
Standards from the segmental-block manufacturers' residential installation manuals (sources in our research notes); poured and mortared walls follow the stamped design instead, with a footing below frost.
Water is the load that kills walls. Saturated soil weighs far more than dry soil, and in cold-winter metros it freezes and expands against the back of the wall every year. The block makers' specifications exist to get that water down to a pipe and out: the stone, the fabric, the pipe and the outlet. A poured or mortared wall adds a footing below the frost line ($30–$100 a linear foot), rebar ($1–$5 a square foot) and weep holes, and often a waterproofing coat on the back ($2–$10 a square foot).
Where the water goes is a rule too. Los Angeles requires surface drainage to the street through non-erosive devices and bans draining across a property line, and most cities have a version. A pipe that outlets onto the neighbor's lawn is a dispute waiting to happen; make the quote say where it ends.
- Ask for the base depth, stone width and pipe outlet in writing — the three numbers that separate a $4,200 wall from a $3,000–$7,000 rebuild
- Clay, fill or a wet site: expect the contractor to over-excavate and replace with granular material, compacted in lifts
- Frost country: the base and any footing go below the local frost depth; ask what that depth is
- Sloped yards: expect labor to run 50% or more above a flat site, and a geotechnical report ($800–$3,500) on the steep ones
None of this is exotic. It is what the block maker's free installation guide says, and a crew that cannot describe it from memory should not build your wall.
What block, timber, concrete and stone cost in 2026, and why wall quotes rose
Materials are about 40% of a block wall. In the year to September 2026 the producer price index for concrete block and brick rose 3.6%, construction sand, gravel and crushed stone 6.3%, ready-mix concrete 2.3% and softwood lumber 14.2% — so timber walls got dearer faster than block walls. Our model carries +4.2% for a block wall's materials and +2.2% for the whole job.
| Material | Retail or guide price | Share of a wall's cost | 2025–2026 move |
|---|---|---|---|
| Segmental (interlocking) concrete block | $2–$10 per block at the yard; $20–$52 per sq ft installed | About 60% of a block wall's materials | Concrete block and brick PPI +3.6% (Sep 2025 to Sep 2026) |
| Crushed stone and gravel (base, drainage stone) | $10–$50 per ton | About 25% of materials; several tons on a 25 ft wall | Sand, gravel and crushed stone PPI +6.3% |
| Pressure-treated 6 × 6 timber | $15–$35 per sq ft installed; railroad ties $15–$25 each | Most of a timber wall's materials | Softwood lumber PPI +14.2%; 10% Section 232 tariff on imported softwood lumber from Oct 14, 2025 |
| Ready-mix concrete (poured walls, footings) | Footing $30–$100 per linear ft; rebar $1–$5 per sq ft | Most of a poured wall's materials | Ready-mix concrete PPI +2.3% |
| Perforated pipe, filter fabric, geogrid | Included in a proper quote; drainage priced at $10–$30 per linear ft | About 15% of materials | No single index; carried at +3% in our model |
Retail prices from big-box and cost-guide pages read in October–November 2026, before contractor discounts and delivery; price moves from the sources in our research notes.
Block walls rode out 2025–2026 better than timber. Concrete block and brick prices rose 3.6% in the year to September 2026 and crushed stone 6.3%, against 14.2% for softwood lumber after a 10% Section 232 tariff on imported softwood timber and lumber took effect on October 14, 2025 (the rate stayed at 10% on January 1, 2026; the EU and Japan are capped at 15% all-in). The block in a $4,200 wall is only $2–$10 a unit, so even a 10% block price move shifts a quote by about 2–4%; labor, at about 60% of the bill, moved 0.8% in federal wage data.
That is why retaining wall prices rose about 2.2% over the past year in our model, and why a timber wall ($1,900–$4,550) closed some of its price gap with block ($2,500–$6,500) in 2026.
- Ask whether the quote holds its price for 30 days; block and stone are bought by the pallet and ton as the job starts
- On a timber wall, ask for the lumber's treatment rating (ground contact) and the price per timber — the 2026 lumber run-up shows up here first
- Block, stone and gravel are quarried and made regionally, so freight sets the local price more than the index does
Materials are about 40% of a block wall and labor the rest, so a 10% move in block prices shifts a $4,200 quote by roughly $168. If a quote jumps between estimate and invoice, ask what changed in the scope before accepting a materials story.
What the cheap quote leaves out, when to book, and the DIY math
Two quotes for the same 4 ft × 25 ft wall can be $4,000 apart, and the gap is usually what is behind the wall, not the block in front. Here is what gets cut, when crews discount, and when doing it yourself pays.
Timing moves the price too. Spring and early summer are the rush everywhere, when quotes run highest and slots fill weeks ahead. Frozen ground stops base work in the North from roughly December to March, so late fall, before the freeze, is when crews there look for work; in the South and Southwest the slow, cheaper months are the hot ones, and fall through winter is prime building weather. In wet-winter metros like Seattle and Portland, the dry season is the only season for a wall, and it is priced that way.
The DIY math: materials run $4–$20 a square foot and tools about $157, so a 2 ft × 20 ft garden wall costs $317–$957 in materials against $1,150–$3,000 from a crew — a saving of about $1,263 for a long weekend of digging, compacting and lifting 50-pound blocks. For the 4 ft × 25 ft wall the saving looks bigger ($3,000 or so) but the job is 100 blocks, several tons of gravel, a trench, a plate compactor and a base that has to be dead level; this is the height where DIY walls fail. Over 3 ft, on a slope, or with anything above the wall, hire it out.
- No drainage stone or pipe.The most common cut and the most expensive later. 12 inches of stone, a perforated pipe and fabric cost $10–$30 a linear foot; a wall without them is the one you rebuild at $30–$70 a square foot.
- A thin base.Two inches of sand instead of 6 inches of compacted crushed stone in a trench 18–24 inches wide. The wall is level the day it is finished and not the next spring.
- No geogrid on a wall over 3–4 ft.Geogrid is cheap per square foot and slow to install. A tall wall quoted at the 4 ft per-foot rate is a wall quoted without it.
- No permit, no design.Skipping $50–$450 and $400–$2,500 on a wall that needs them saves money until the city or the buyer's inspector asks for the paperwork.
- Spoil left on site, no caps, no cleanup.Excavation is $50–$225 a cubic yard with haul-away; caps are $10–$50 a foot. A low quote may leave the dirt in your yard and the wall without a top course.
- No insurance.A crew with a skid steer, a dump trailer and a trench on your property is a liability. Ask for the certificate of general liability and workers' comp, and the contractor license where your state has one.
If you want a cheaper pro job without the corner-cutting, do the demolition of the old wall yourself ($10–$25 a square foot saved), clear the access, book late fall, keep the wall under 4 ft with level ground above it, and ask for drainage and base depth in writing.
Retaining wall cost: FAQ
How much does a retaining wall cost?
$2,500–$6,500 for a 4 ft high, 25 ft long segmental block wall installed in 2026, with $4,200 typical — about $34 a square foot. Credible quotes run from about $1,200 for a short, low wall in a cheap market to $12,000 for a permitted, engineered wall on a slope in a top-cost city.
How much does a retaining wall cost per linear foot?
For block, $40–$104 at 2 ft high, $80–$208 at 4 ft and $144–$374 at 6 ft with geogrid and a stamped design. Timber runs lower per foot, poured concrete and stone higher.
How much does a retaining wall cost per square foot?
Timber $15–$35, gabion $15–$40, segmental block $20–$52, mortared CMU $20–$45, boulder $25–$50, poured concrete $25–$60 and natural stone $30–$90 per square foot of wall face, installed.
Do I need a permit for a retaining wall?
In most US cities, not for a wall of 4 ft or less measured from the bottom of the footing that holds only level ground. Taller walls, and any wall with a slope, driveway or structure above it, need a permit and usually a design stamped by a licensed structural or civil engineer. Some cities set the line at 3 ft or lower. Check with your building department — not legal advice.
How much does a structural engineer cost for a retaining wall?
$400–$2,500 for a stamped residential design, billed at $100–$220 an hour. A geotechnical report, where the city asks for one, is $800–$3,500. Both are normal on walls over 4 ft.
Timber or block — which is cheaper?
Timber to build ($15–$35 against $20–$52 a square foot; $1,900–$4,550 against $2,500–$6,500 for a 4 ft × 25 ft wall). Block to own: 50+ years against 10–40 for timber, and replacing a rotted timber wall with block later costs $3,500–$9,000.
How much does retaining wall repair cost?
$250–$1,500 for a typical repair — re-setting leaning blocks, adding a drain, filling cracks. Adding drainage to an existing wall is $60–$70 a linear foot; a wall that has moved more than a few inches is rebuilt at $30–$70 a square foot.
How long does a retaining wall last?
Treated timber 10–40 years; segmental block and poured concrete 50–100; natural stone 50–200. The drainage behind the wall decides where in the range it lands.
Can I build a retaining wall myself?
Under 3 ft with level ground above it, yes: materials run $4–$20 a square foot and tools about $157, against $20–$52 installed for block. Over 3 ft, on a slope, or with a driveway or structure above, hire a contractor — the base, drainage and geogrid are where DIY walls fail.
Are retaining wall prices going up in 2026?
Slowly: about 2.2% over the past year in our model. Construction laborers' median pay rose 0.8% in federal data (May 2024 to May 2025), and block, cement, crushed stone and treated lumber moved more, but materials are only about 40% of the bill.
Done your research?
Pick your city for local prices, or get two real retaining wall quotes now. Free, no spam.