Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does a retaining wall cost in Brownsville?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched13 min read
Retaining wall cost

Retaining wall costs in Brownsville

Brownsville, TXChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Brownsville, TX
$2,400–$6,000per wall

Most crews in Brownsville charge $2,400–$6,000 for a 4 ft × 25 ft block wall with $3,900 typical. Go past 4 ft and the permit, a stamped design and geogrid push the same length of wall to $6,850–$17,300 at 6 ft × 50 ft.

How we get this data
Typical
$3,900
Low end
$1,050
High end
$10,550
Block wall, 4 × 25 ft
$2,400–$6,000
Block, per sq ft
$19–$48
Timber, per sq ft
$14–$33
Repair
$235–$1,350

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local retaining wall contractors send you a real quote. Free, no obligation.

Get my fair quote →
Typical retaining wall price: Brownsville vs nearby citiesTypical price, per wall. The line marks the US typical.
Houston, TX $4,000
Austin, TX $4,000
Brownsville, TXThis guide $3,900
McAllen, TX $3,900
Laredo, TX $3,900

The typical Brownsville price is $3,900, 7% below the US typical of $4,200.

Where Brownsville sits among 195 US metrosNumber of metros at each typical retaining wall price, per wall.

Brownsville's price band

Brownsville is cheaper than 83% of the 195 US metros we price for retaining wall work.

Building a retaining wall in Brownsville runs $2,400–$6,000 for the standard job — 4 ft high, 25 ft long, interlocking block on a gravel base — and most homeowners pay about $3,900. Repairs to a leaning or wet wall are $235–$1,350; tearing out a failed wall and rebuilding it is $29–$64 a square foot.

Brownsville is a smaller market. Construction laborers in Texas earn a median $40,620 a year in federal wage data, about 14% below the US median of $47,120, and labor is about 60% of a block-wall bill, so that pay gap, not the block, is what moves a quote here about 7% below the national typical.

Brownsville is a smaller market. Construction laborers in Texas earn a median $40,620 a year in federal wage data, about 14% below the US median of $47,120, and labor is about 60% of a block-wall bill, so that pay gap, not the block, is what moves a quote here about 7% below the national typical.

Comparing cities, or after the US-wide picture? See the national guide: Retaining wall cost in the USA.

Quick answer

$2,400–$6,000 to build a 4 ft × 25 ft segmental block retaining wall in Brownsville — typically $3,900 or about $32 a square foot. Timber runs $1,800–$4,250 for the same wall, a 6 ft × 50 ft engineered wall $6,850–$17,300, and repairs $235–$1,350. Verified November 2026. Get free Brownsville quotes →

  • Block wall, 4 ft × 25 ft: $2,400–$6,000 ($3,900 typical)
  • Per sq ft: timber $14–$33, block $19–$48, poured concrete $24–$56
  • Per linear ft: $38–$96 at 2 ft, $76–$192 at 4 ft, $137–$346 at 6 ft
  • Over 4 ft: permit $50–$450 + stamped design $385–$2,350
  • Repairs $235–$1,350; tear out and rebuild $29–$64 per sq ft

Prices verified November 2026 · Cross-referenced against 30+ American pricing sources · See methodology

Detailed pricing — Retaining wall cost in Brownsville 2026

Installed prices with excavation, gravel base, drainage stone and pipe, backfill and cleanup unless the row says otherwise. Brownsville metro, re-verified November 2026. Permits, stamped designs, caps, steps and old-wall removal are their own rows.

ServiceLowTypicalHigh
Segmental block retaining wall, 4 ft high × 25 ft long (100 sq ft), installedper wall$2,400per wall$3,900$6,000
Pressure-treated timber wall, 4 ft high × 25 ft long, installedper wall$1,800per wall$2,850$4,250
Small garden wall, 2 ft high × 20 ft long, block (40 sq ft)per wall$1,100per wall$1,750$2,750
Large wall, 6 ft high × 50 ft long, geogrid-reinforced block (300 sq ft), engineeredper wall$6,850per wall$11,500$17,300
Segmental (interlocking) concrete block, per sq ft of wall face, installedper sq ft$19per sq ft$32$48
Pressure-treated timber (6×6) wall, per sq ft, installedper sq ft$14per sq ft$23$33
Poured reinforced concrete wall, per sq ft, installedper sq ft$24per sq ft$37$56
Mortared concrete block (CMU) wall on a footing, per sq ft, installedper sq ft$19per sq ft$28$42
Natural stone wall (dry-stack or mortared), per sq ft, installedper sq ft$29per sq ft$51$83
Boulder (rock) wall, per sq ft, installedper sq ft$24per sq ft$35$46
Gabion (wire basket and rock) wall, per sq ft, installedper sq ft$14per sq ft$26$37
Block wall, 2 ft high, per linear ft, installedper linear ft$38per linear ft$64$96
Block wall, 4 ft high, per linear ft, installedper linear ft$76per linear ft$128$192
Block wall, 6 ft high with geogrid (engineered), per linear ft, installedper linear ft$137per linear ft$230$346
Stamped design by a licensed structural or civil engineer (walls over 4 ft or holding a surcharge)per wall$385per wall$940$2,350
Geotechnical (soils) report, where the city asks for oneper report$770per report$1,700$3,300
Building permit for a retaining wall (where required)per permit$50per permit$200$450
Drainage behind a new wall (perforated pipe, drainage stone, fabric), per linear ftper linear ft$10per linear ft$19$28
Excavation and site prep, per cubic yard removedper cu yd$47per cu yd$114$206
Cap blocks or coping on top of the wall, per linear ftper linear ft$10per linear ft$23$47
Steps built into the wall (3-5 risers), blockper set$380per set$1,100$2,300
Repair a failing section (re-set leaning blocks, fix drainage, cracks)per job$235per job$640$1,350
Tear out and rebuild a failed wall, per sq ft (demolition, haul-away, new wall)per sq ft$29per sq ft$46$64
Remove an old wall and haul it away, per sq ftper sq ft$9per sq ft$14$23
retaining wall jobs in Brownsville: what they costPer sq ft, low to high with the typical price marked. Every line is in the table above.
Natural stone wall (dry-stack or mortared), per sq ft, installed $51$29–$83
Tear out and rebuild a failed wall, per sq ft (demolition, haul-away, new wall) $46$29–$64
Poured reinforced concrete wall, per sq ft, installed $37$24–$56
Boulder (rock) wall, per sq ft, installed $35$24–$46
Segmental (interlocking) concrete block, per sq ft of wall face, installed $32$19–$48
Mortared concrete block (CMU) wall on a footing, per sq ft, installed $28$19–$42
Gabion (wire basket and rock) wall, per sq ft, installed $26$14–$37
Pressure-treated timber (6×6) wall, per sq ft, installed $23$14–$33
Remove an old wall and haul it away, per sq ft $14$9–$23
Already got a quote?
Check it against these Brownsville prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local retaining wall contractors in Brownsville

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What kind of retaining wall do you need?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 30+ American pricing sources · See methodology

Prices cover the Brownsville metro. Tight lots in Downtown Brownsville cost more for hand-carrying and disposal; South Padre & Port Isabel runs a little lower.

How retaining wall costs vary across Brownsville

Retaining wall prices across Brownsville

Same block, four price bands. Hand-carrying and disposal push Downtown Brownsville to the top, and walls in South Padre & Port Isabel tend to come in at or under the city typical.

Retaining wall prices across BrownsvilleTypical range by part of the metro, per wall. The line marks the Brownsville typical.
Downtown Brownsville6–12% above the city average $2,550–$6,700per wall
North Brownsville & OlmitoStandard pricing $2,400–$6,000per wall
Harlingen & San BenitoStandard to 5% above $2,450–$6,300per wall
South Padre & Port Isabel3–7% below; some trip charges $2,250–$5,800per wall

Downtown Brownsville

6–12% above the city average
Downtown, Mitte Cultural District, Southmost
4 ft × 25 ft block wall
$2,550–$6,700 per wall
Block per sq ft
$20–$54 / sq ft of block wall

Older, denser streets where the crew works by hand. Expect a few hundred dollars more for hand-carrying material, protecting neighbors' property and hauling spoil through a side gate.

North Brownsville & Olmito

Standard pricing
North Brownsville, Olmito, Rancho Viejo
4 ft × 25 ft block wall
$2,400–$6,000 per wall
Block per sq ft
$19–$48 / sq ft of block wall

Settled neighborhoods with driveway access for a machine. Expect average rates and plenty of everyday jobs: garden walls, raised beds and driveway edges.

Harlingen & San Benito

Standard to 5% above
Harlingen, San Benito, Los Fresnos
4 ft × 25 ft block wall
$2,450–$6,300 per wall
Block per sq ft
$19–$50 / sq ft of block wall

Older homes being updated one project at a time. Expect a mix of small garden walls and bigger terrace jobs, often with an old timber wall to remove.

South Padre & Port Isabel

3–7% below; some trip charges
South Padre Island, Port Isabel
4 ft × 25 ft block wall
$2,250–$5,800 per wall
Block per sq ft
$18–$47 / sq ft of block wall

The cheapest rates in the metro, with travel sometimes billed. Rural homes may wait longer for a slot in the spring rush.

What you'll actually pay — job by job

Real-World Retaining Wall Costs in Brownsville

Here's what common retaining wall jobs cost in Brownsville in 2026, excavation, gravel base, drainage stone and pipe, backfill and cleanup included.

Garden wall, 2 ft × 20 ft, block — one day

$1,100–$2,750

Forty square feet of interlocking block on a gravel base with drainage stone behind it. No permit in most of Brownsville at this height, and the most common DIY wall. Priced by a crew it comes to $1,100–$2,750, about $1,750 typical.

Standard wall, 4 ft × 25 ft, block — 2 to 3 days

$2,400–$6,000

The job every other price on this page is built around: $3,900 typical. Right at the permit line in most cities (4 ft measured from the bottom of the base), so a wall that ends up 4 ft 2 in. tall can suddenly need a permit ($50–$450) and a stamped design ($385–$2,350) — about $5,040 all in.

Same wall with caps and full drainage priced as lines

$2,900–$7,900

A cap course ($575 for 25 ft) and the perforated pipe, drainage stone and fabric ($475 for 25 ft) bring the standard wall to about $4,950 in Brownsville. If a quote is far below $2,400, check whether these are in it.

Tall wall, 6 ft × 50 ft, geogrid-reinforced block — 1 to 2 weeks

$6,850–$17,300

Three hundred square feet of face, geogrid every other course tied back into compacted fill, a deeper base, a permit and a design by a licensed structural or civil engineer. $6,850–$17,300 in Brownsville, about $11,500 typical. Many building departments would rather approve two 3 ft terraces.

Replace a rotted timber wall with block, 4 ft × 25 ft

$3,300–$8,300

Tear-out and haul-away of the old timbers ($900–$2,300 for 100 sq ft) plus the new block wall ($3,900) comes to about $5,300 in Brownsville. A rebuild priced as one line is $29–$64 a square foot.

How much does a retaining wall cost in Brownsville?

$2,400–$6,000, with $3,900 typical. A flat, open yard with machine access sits at the low end; a slope, a tight side yard where everything is wheelbarrowed, or an old wall to remove first lands near the top. Quotes above $6,000 for 100 square feet usually mean a permit, a stamped design or poured concrete is in the price.

If an old wall has to come out first, add $9–$23 a square foot for demolition and haul-away — $900–$2,300 for a 100 sq ft wall — or price the whole job as a rebuild at $29–$64 a square foot. Figures re-checked against 30 sources in November 2026.

Retaining wall prices in Brownsville (2026): by height, material and job

The standard 4 ft × 25 ft block wall costs $2,400–$6,000; per linear foot a 4 ft block wall is $76–$192, and a stamped design for a taller wall $385–$2,350.

Line on the quoteLowTypicalHigh
Block wall, 4 ft × 25 ft (100 sq ft), installed$2,400$3,900$6,000
Timber wall, 4 ft × 25 ft, installed$1,800$2,850$4,250
Block wall, 2 ft high, per linear ft$38$64$96
Block wall, 4 ft high, per linear ft$76$128$192
Block wall, 6 ft high with geogrid, per linear ft$137$230$346
Stamped design, licensed structural or civil engineer$385$940$2,350
Building permit (where required)$50$200$450
Repair a failing section$235$640$1,350

The 4 ft line matters in Brownsville: a wall measured at 4 ft from the bottom of its base and holding only level ground usually needs no permit; add a few inches, a slope above it or a driveway behind it and the permit ($50–$450) and stamped design ($385–$2,350) come into the price.

What moves a retaining wall quote in Brownsville:

  • Height — per linear foot, 2 ft is $38–$96, 4 ft $76–$192 and 6 ft with geogrid $137–$346; past 4 ft add the permit and design.
  • Material — timber $14–$33, block $19–$48, poured concrete $24–$56, stone $29–$83 per square foot.
  • Access and slope — a wall a skid steer can reach prices normally; wheelbarrow access or a steep slope adds 50% or more to labor.
  • What is behind the wall — a driveway, a slope or a patio above the wall is a surcharge; it needs a stronger design and usually a permit at any height.
  • Old wall removal — $9–$23 a square foot to tear out and haul away what is there now.

Ask every Brownsville contractor the same five things: the finished height and where it is measured from, the base depth and gravel, how much drainage stone and pipe go behind the wall, whether geogrid is in the price, and who pulls the permit. Compare those, not the headline price. Get a quote for your retaining wall job →

Retaining Wall Cost in Brownsville by Size

Quick answer

Garden wall, 2 ft × 20 ft: $1,100–$2,750. Standard wall, 4 ft × 25 ft: $2,400–$6,000. Tall wall, 6 ft × 50 ft, geogrid-reinforced and engineered: $6,850–$17,300. Per linear foot: $38–$96 at 2 ft, $76–$192 at 4 ft, $137–$346 at 6 ft.

Worked example: a Brownsville homeowner with a 25 ft grade change could build one 4 ft block wall for about $3,900, or two 2 ft terraces — 50 linear feet at $64 a foot, about $3,200 — with no permit, no stamped design and planting beds between them. The terraces cost less up front but skip the $1,140 of permit and design the 4 ft wall risks if it measures over the line.

Length is cheap, height is dear. Doubling the 4 ft wall to 50 ft roughly doubles the price to about $6,400; raising it to 6 ft instead takes 50 feet to $11,500 because of geogrid, the deeper base, the permit and the design — a 80% premium for the extra two feet.

Brownsville Retaining Wall Costs by Material and Height

Material or heightCostBest for
Segmental (interlocking) concrete block$19–$48 per sq ftThe standard residential wall: dry-stacked on a gravel base, no mortar or footing. Lasts 50+ years; geogrid takes it past 4 ft.
Pressure-treated timber (6 × 6)$14–$33 per sq ftThe cheapest wall to build and the shortest-lived: 10–40 years before rot sets in, less in wet ground.
Poured reinforced concrete$24–$56 per sq ftTall walls, tight sites, driveways and anything holding a load. Needs forms, rebar and a footing below frost; can be faced with veneer.
Mortared concrete block (CMU) on a footing$19–$42 per sq ftGrouted, rebar-reinforced block on a poured footing, usually stuccoed or veneered. Common in California and the Southwest.
Natural stone$29–$83 per sq ftLooks, longevity (50–200 years) and the most skilled labor. Dry-stack fieldstone sits at the low end; cut, mortared stone at the top.
Boulder (rock) wall$24–$46 per sq ftBig landscape walls where a machine can set 1–3 ft rocks. Cheap per square foot where rock is local; needs room to work.
Gabion (wire baskets filled with rock)$14–$37 per sq ftDrains through itself, so no pipe behind it. Industrial look; good on creek banks and long low slopes.
Block wall, 2 ft high$38–$96 per linear ftGarden beds and grade changes under 2 ft: no permit almost anywhere, often a weekend DIY job.
Block wall, 4 ft high$76–$192 per linear ftThe most common height. Right at the permit line in most cities (measured from the bottom of the base), so check before you dig.
Block wall, 6 ft high, geogrid-reinforced$137–$346 per linear ftNeeds a permit, a stamped design and geogrid layers tied back into the soil. Many cities would rather see two 3 ft terraces.
Repair a failing wall$235–$1,350 per jobLeaning blocks re-set, a drain added, cracks filled. Worth it when the base is sound; a bulge low down usually means a rebuild.
Tear out and rebuild$29–$64 per sq ftWalls that have moved more than a few inches, timber that has rotted through, or any wall with no drainage behind it.
Cost by material or height in BrownsvilleTypical range, per sq ft.
Segmental (interlocking) concrete block $19–$48per sq ft
Pressure-treated timber (6 × 6) $14–$33per sq ft
Poured reinforced concrete $24–$56per sq ft
Mortared concrete block (CMU) on a footing $19–$42per sq ft
Natural stone $29–$83per sq ft
Boulder (rock) wall $24–$46per sq ft
Gabion (wire baskets filled with rock) $14–$37per sq ft
Tear out and rebuild $29–$64per sq ft
Brownsville tip: ask what the wall sits on. A 4 ft block wall needs a trench about 18 inches wide with 6 inches of compacted gravel and the first course buried; a quote that mentions none of this is a quote for a wall that will lean.

Per square foot vs the whole wall — the Brownsville retaining wall bill

Block costs $19–$48 a square foot of wall face installed in Brownsville, so 100 square feet should be $1,900–$4,800. The standard wall prices at $2,400–$6,000 because every job also carries fixed costs — a machine or a crew's hand-carry, a pallet delivery, spoil haul-away and cleanup — worth about $500–$1,200 on a wall this size. The smaller the wall, the bigger that share.

That is why a 2 ft × 20 ft garden wall ($1,100–$2,750) costs far more per square foot than a 6 ft × 50 ft wall ($6,850–$17,300), and why a quote for a short wall that looks high per square foot can still be fair. Compare whole-job prices for small walls and per-square-foot prices for long ones.

What's included in a Brownsville retaining wall quote (and what costs extra)

A standard block-wall price covers excavation, a compacted gravel base, the block, drainage stone and a perforated pipe behind the wall, backfill, compaction and cleanup. The headline price often leaves out:

  • Cap blocks or coping — $10–$47 a linear foot
  • Permit and stamped design — $50–$450 and $385–$2,350 once the wall passes 4 ft or holds a surcharge
  • Removing an old wall — $9–$23 a square foot, haul-away included
  • Steps, lighting and a fence or railing on top — steps run $380–$2,300 a set; a fence on top changes the design

Ask for the base depth, drainage stone width, geogrid and permit responsibility in writing, and for proof of liability insurance.

What Affects Retaining Wall Costs in Brownsville

Height, and where it is measured from

A 2 ft block wall is $38–$96 a linear foot in Brownsville, a 4 ft wall $76–$192, and a 6 ft geogrid-reinforced wall $137–$346. Building departments measure from the bottom of the footing or base course, not the ground, so a wall with 6+ inches buried can cross the 4 ft permit line before it looks 4 ft tall.

Material

Timber $14–$33, gabion $14–$37, block $19–$48, boulder $24–$46, poured concrete $24–$56 and natural stone $29–$83 a square foot. Timber is cheapest and shortest-lived; stone the dearest and longest.

Drainage and base

A proper wall sits on at least 6 inches of compacted gravel with 12 inches of drainage stone and a perforated pipe behind it. Priced as lines, drainage is $10–$28 a linear foot and excavation $47–$206 a cubic yard; skipping either is how walls fail.

Permits, design and soil

Past 4 ft, or at any height with a slope or driveway above it, most cities want a permit ($50–$450) and a design stamped by a licensed structural or civil engineer ($385–$2,350); some ask for a geotechnical report ($770–$3,300).

Access and site

A flat yard a skid steer can reach is the low end. A side yard where block and gravel are wheelbarrowed in, a steep slope, roots, or an old wall to remove ($9–$23 a square foot) push the job toward $6,000 and beyond.

Labor rates in Brownsville

Construction laborers in Texas earn a median $40,620 a year in federal wage data, about 14% below the US median. Crews bill about $45–$90 an hour here, and labor is roughly 60% of a block-wall bill, so Brownsville prices land about 7% below the US typical of $4,200.

Season

Spring and early summer are the rush, when quotes run higher and slots fill weeks ahead. Frozen ground stops base work in cold-winter metros; in hot ones crews prefer fall and winter. Late fall is often the cheapest time to book in Brownsville.

How to Save Money on a Retaining Wall in Brownsville
  1. Stay under the permit line.A wall that measures under 4 ft from the bottom of its base, holding level ground, usually needs no permit or stamped design in Brownsville — saving $50–$450 and $385–$2,350. Two short terraces often cost less than one tall wall.
  2. Pick block over poured concrete where it works.Segmental block is $19–$48 a square foot against $24–$56 for poured concrete in Brownsville, needs no forms or footing, and lasts as long for walls under 6 ft.
  3. Do the demolition yourself.Tearing out an old timber wall and stacking it for pickup saves $9–$23 a square foot — $900–$2,300 on a 100 sq ft wall. Leave the digging to the crew; the base is where walls fail.
  4. Combine it with other hardscape.A crew already on site with a skid steer and a dump trailer can add a patio edge, steps or a second terrace for far less than a separate visit.
  5. Book the slow season.Spring is the rush in Brownsville. Late fall, before the ground freezes, or winter in warm metros, is when crews have open weeks and sharper prices.
  6. Never cut the drainage.Drainage stone, pipe and fabric cost $250–$700 on a 25 ft wall; a wall built without them is the one you rebuild at $29–$64 a square foot.
Retaining Wall Cost in Brownsville: What the Quote Should Include

Brownsville contractors quote by the job, by the square foot or by the linear foot. Before you pay a deposit, get these in writing:

  • Length and finished height, and where the height is measured from (bottom of base to top of wall)
  • The material, on its own line — block brand and size, timber grade, concrete strength
  • Excavation, spoil haul-away and backfill, with the gravel base depth stated
  • Drainage: perforated pipe, drainage stone width and filter fabric, and where the pipe outlets
  • Geogrid layers and spacing on any wall over 3–4 ft
  • Who pulls the permit and pays for the stamped design, and whether a soils report is needed
  • Old wall removal and disposal, included or listed
  • Caps, steps, lighting and any fence or railing on top; warranty, dates and payment stages
Frequently asked questions — Retaining wall cost in Brownsville
How much does a retaining wall cost in Brownsville?

$2,400–$6,000 for a 4 ft high, 25 ft long segmental block wall installed, and $3,900 is typical — about $32 a square foot of wall face. Timber is $1,800–$4,250 for the same wall; poured concrete about $2,900–$6,800.

How much is a retaining wall per linear foot in Brownsville?

For block, $38–$96 at 2 ft high, $76–$192 at 4 ft and $137–$346 at 6 ft with geogrid. Timber runs lower, poured concrete and stone higher.

How much is a retaining wall per square foot in Brownsville?

Timber $14–$33, gabion $14–$37, block $19–$48, boulder $24–$46, poured concrete $24–$56 and natural stone $29–$83 per square foot of wall face, installed.

Do I need a permit for a retaining wall in Brownsville?

In most of Texas, a retaining wall up to 4 ft tall measured from the bottom of the footing that holds back only level ground needs no building permit; taller walls, or any wall with a slope, driveway or structure above it, need a permit and usually a design stamped by a licensed structural or civil engineer. Check with the city before you dig.

How much does it cost to repair a retaining wall in Brownsville?

$235–$1,350 for a typical repair — re-setting leaning blocks, adding a drain, filling cracks. Adding drainage to an existing wall runs $60–$70 a linear foot with excavation. A wall that has moved more than a few inches is usually rebuilt at $29–$64 a square foot.

What does it cost to replace an old timber wall with block in Brownsville?

About $3,300–$8,300 for a 4 ft × 25 ft wall: $900–$2,300 to tear out and haul away the timbers plus $2,400–$6,000 for the new block wall.

Timber or block — which is cheaper?

Timber to build: $14–$33 a square foot against $19–$48 for block in Brownsville. Block to own: it lasts 50+ years where treated timber gives 10–40 before rot, and a timber wall's second build costs more than block would have the first time.

What does a stamped design or a soils report cost?

A design by a licensed structural or civil engineer runs $385–$2,350 for a residential wall ($100–$220 an hour); a geotechnical report, where the city asks for one, $770–$3,300. Both are normal on walls over 4 ft or walls holding a slope or driveway.

How long does it take to build?

One day for a 2 ft garden wall, two to three days for the standard 4 ft × 25 ft block wall, and one to two weeks for a 6 ft × 50 ft reinforced wall including inspections. Add a few weeks up front if a permit and design are needed.

What's included in a Brownsville retaining wall quote?

Excavation, a compacted gravel base, the block, drainage stone and pipe, backfill and cleanup. Often extra: caps ($10–$47 a foot), the permit ($50–$450), the stamped design ($385–$2,350), steps ($380–$2,300) and removing an old wall ($9–$23 a square foot).

Prices verified November 2026 · Cross-referenced against 30+ American pricing sources · See methodology

Prices for the Brownsville metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, platform data, dated contractor price pages, big-box material prices, block makers' installation standards, city codes and federal wage data. No contractor can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read our full methodology →

Get a fair retaining wall quote in Brownsville

Local retaining wall contractors · Free quotes · No obligation, no spam.

Get quotes in Brownsville →Max 2 retaining wall contractors will contact you
Get quotes in BrownsvilleMax 2 retaining wall contractors · free · no spam→