Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Retaining wall cost / deep-diveVerified November 2026

How much does a retaining wall cost per square foot?

By Our research team · Last verified · 14 jobs priced · Methodology

Retaining wall cost

Retaining wall cost per square foot in the US

United States
Get free quotesFree · no obligation · max 2 pros
Normal range across the US
$20–$52per sq ft

Segmental (interlocking) concrete block, per sq ft of wall face, installed. The full price list is below.

How we get this data
Typical
$34
Low
$20
High
$52
Jobs priced
14
Cities priced
195
Sources
30+
Verified
November 2026
Quick answer

$20–$52 per square foot of wall face for a segmental block retaining wall in 2026, installed, with $34 typical. Timber is $15–$35, gabion $15–$40, boulder $25–$50, poured concrete $25–$60 and natural stone $30–$90. Per linear foot, a block wall is $40–$104 at 2 ft, $80–$208 at 4 ft and $144–$374 at 6 ft.

  • Block $20–$52/sq ft; timber $15–$35; poured concrete $25–$60
  • Stone $30–$90; boulder $25–$50; gabion $15–$40; CMU on a footing $20–$45
  • Per linear ft of block: $40–$104 at 2 ft, $80–$208 at 4 ft, $144–$374 at 6 ft
  • A 4 ft × 25 ft block wall: $2,500–$6,500 ($4,200 typical)
  • Small walls cost more per sq ft: fixed site costs of $500–$1,300 on every job

Prices verified November 2026 · Cross-referenced against 30+ American pricing sources · See methodology

01 / PricesUSA · November 2026

Retaining wall prices per square foot and per linear foot (2026)

Block is $20–$52 a square foot installed. Square feet are of wall FACE — length × height above ground — so a 4 ft × 25 ft wall is 100 sq ft.

Retaining wall prices per square foot and per linear foot (2026)Per sq ft, low to high with the typical price marked.
Natural stone wall (dry-stack or mortared), per sq ft, installed $55$30–$90
Poured reinforced concrete wall, per sq ft, installed $40$25–$60
Boulder (rock) wall, per sq ft, installed $38$25–$50
Segmental (interlocking) concrete block, per sq ft of wall face, installed $34$20–$52
Mortared concrete block (CMU) wall on a footing, per sq ft, installed $30$20–$45
Gabion (wire basket and rock) wall, per sq ft, installed $28$15–$40
Pressure-treated timber (6×6) wall, per sq ft, installed $25$15–$35
JobLowTypicalHigh
Pressure-treated timber (6×6) wall, per sq ft, installedper sq ft$15$25$35
Gabion (wire basket and rock) wall, per sq ft, installedper sq ft$15$28$40
Segmental (interlocking) concrete block, per sq ft of wall face, installedper sq ft$20$34$52
Mortared concrete block (CMU) wall on a footing, per sq ft, installedper sq ft$20$30$45
Boulder (rock) wall, per sq ft, installedper sq ft$25$38$50
Poured reinforced concrete wall, per sq ft, installedper sq ft$25$40$60
Natural stone wall (dry-stack or mortared), per sq ft, installedper sq ft$30$55$90
Block wall, 2 ft high, per linear ft, installedper linear ft$40$68$104
Block wall, 4 ft high, per linear ft, installedper linear ft$80$136$208
Block wall, 6 ft high with geogrid (engineered), per linear ft, installedper linear ft$144$245$374
Small garden wall, 2 ft high × 20 ft long, block (40 sq ft)per wall$1,150$1,900$3,000
Segmental block retaining wall, 4 ft high × 25 ft long (100 sq ft), installedper wall$2,500$4,200$6,500
Pressure-treated timber wall, 4 ft high × 25 ft long, installedper wall$1,900$3,150$4,550
Large wall, 6 ft high × 50 ft long, geogrid-reinforced block (300 sq ft), engineeredper wall$7,200$12,250$18,700

US prices, November 2026. Low is a simple job in a low-cost area; high is a bigger job or a high-cost city.

02 / By city195 cities priced

Does retaining wall cost per square foot change by city?

Yes. The same job costs more where labor and rent cost more. Here's how retaining wall prices in the biggest US metros compare with the US typical of $4200.

Retaining wall prices in the 12 biggest US metrosEach city's typical retaining wall price against the US typical of $4,200.
Los Angeles, CA 15% more
Boston, MA 14% more
Chicago, IL 13% more
New York, NY 12% more
Washington, DC 5% more
Miami, FL Same
Dallas, TX 5% less
Houston, TX 5% less
Atlanta, GA 5% less

Labor, rent and demand move every job on this page in the same direction. Open your city's guide for its full local price list.

03 / The guide5 parts

What to know before you book

Compare

Which square foot: face, not footprint

Retaining walls are priced by the square foot of exposed face — the length times the height you see. A 4 ft × 25 ft wall is 100 sq ft, so at $20–$52 a square foot the block alone should be $2,000–$5,200; the standard wall prices at $2,500–$6,500 because every job also carries $500–$1,300 of fixed costs: the machine or the hand-carry, the pallet delivery, hauling spoil and cleanup.

The buried course does not count toward the price per square foot, but it is real work. A 4 ft block wall sits in a trench about 18 inches wide with 6 inches of compacted gravel under the first course, so the crew builds closer to 4 ft 8 in. of block to show you 4 ft.

Material by material

Pressure-treated 6 × 6 timber is the cheapest wall to build at $15–$35 a square foot and the shortest-lived: 10 to 40 years, less where the ground stays wet. Segmental block ($20–$52) is the standard residential wall — dry-stacked, no mortar, no footing, 50+ years. Mortared CMU on a poured footing ($20–$45) is the California and Southwest norm, usually stuccoed or veneered.

Poured reinforced concrete ($25–$60) needs forms, rebar at $1–$5 a square foot and a footing below frost at $30–$100 a linear foot, which is why it costs more than block for the same height; it wins on tall walls, tight sites and driveways. Boulder walls ($25–$50) are cheap where rock is local and a machine can set it. Gabions ($15–$40) drain through themselves. Natural stone ($30–$90) is the dearest and the longest-lived at 50–200 years.

Why height costs more than length

Per linear foot, a block wall is $40–$104 at 2 ft, $80–$208 at 4 ft and $144–$374 at 6 ft. The jump at 6 ft is not just two more courses: the wall needs geogrid every other course tied back into compacted fill, a wider and deeper base (24 inches wide, 6 inches plus 1 inch per foot of height), a permit ($50–$450) and a design stamped by a licensed structural or civil engineer ($400–$2,500). Two 3 ft terraces are often cheaper than one 6 ft wall and skip the permit.

What moves the per-square-foot price

Access first: a yard a skid steer can reach sits at the low end; a side yard where block and gravel are wheelbarrowed in, or a slope, adds 50% or more to labor. Then what is behind the wall — a driveway, slope or patio above it is a surcharge that needs a stronger design. Then your city: crews bill $50–$100 an hour and labor is about 60% of the bill, so a wall in a high-wage metro costs more than the same wall in the South or Mountain West. Our city pages carry the local figure.

Labor and material split

On a 4 ft block wall, Thumbtack's 2026 cost data put labor at about $4,021 and materials at $2,703 — roughly 60/40. The block itself is $2–$10 a unit, gravel $10–$50 a ton, and a DIY wall's materials run $4–$20 a square foot. The difference between that and $20–$52 installed is the digging, compacting, leveling and lifting, plus the crew's insurance and machine.

04 / Check a quoteFree · no sign-up

Got a price? See if it's fair

Segmental (interlocking) concrete block, per sq ft of wall face, installed
Type the price you were quoted. We compare it with the US range of $20–$52 per sq ft.

A different job, or got it as a PDF or photo? Use the full quote checker →

Free quotes

Get free quotes from up to 2 local retaining wall contractors

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What kind of retaining wall do you need?

Tap one to start.

05 / Questions5 answers

Retaining wall cost per square foot: FAQ

What is the cheapest retaining wall per square foot?

Pressure-treated timber at $15–$35 a square foot, then gabion ($15–$40) and segmental block ($20–$52). Timber is cheapest to build but lasts 10–40 years against 50+ for block.

How much is a 100 square foot retaining wall?

$2,500–$6,500 in block (a 4 ft × 25 ft wall), about $4,200 typical; $1,900–$4,550 in timber; about $3,000–$7,300 in poured concrete and $3,500–$10,300 in natural stone.

How do I count the square feet of a retaining wall?

Multiply the length by the height you will see above the ground. A 30 ft wall that is 3 ft tall is 90 sq ft. Buried base courses are not counted in the price per square foot, though the crew still builds them.

Why is my short wall so expensive per square foot?

Fixed costs. Delivery, a machine or hand-carry, spoil haul-away and cleanup add about $500–$1,300 to any wall, which is a big share of a 40 sq ft garden wall ($1,150–$3,000) and a small share of a 300 sq ft wall ($7,200–$18,700).

Is poured concrete worth the extra over block?

Only when you need it: walls over 6 ft, a driveway or building above the wall, or a site too tight to batter a block wall back. For a plain 4 ft garden wall, block at $20–$52 a square foot lasts as long as concrete at $25–$60.

Get retaining wall quotesMax 2 pros · free · no spam→