Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does a retaining wall cost in Dallas?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched11 min read
Retaining wall cost

Retaining wall costs in Dallas

Dallas, TXChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Dallas, TX
$2,400–$6,150per wall

Most crews in Dallas charge $2,400–$6,150 for a 4 ft × 25 ft block wall and $4,000 is what most homeowners here pay. Per square foot, block is $19–$49, timber $15–$33 and poured concrete $24–$57.

How we get this data
Typical
$4,000
Low end
$1,100
High end
$11,000
Block wall, 4 × 25 ft
$2,400–$6,150
Block, per sq ft
$19–$49
Timber, per sq ft
$15–$33
Repair
$240–$1,400

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local retaining wall contractors send you a real quote. Free, no obligation.

Get my fair quote →
Typical retaining wall price: Dallas vs nearby citiesTypical price, per wall. The line marks the US typical.
Dallas, TXThis guide $4,000
Austin, TX $4,000
Arlington, TX $3,950
Waco, TX $3,900
Killeen, TX $3,900

The typical Dallas price is $4,000, 5% below the US typical of $4,200.

Where Dallas sits among 195 US metrosNumber of metros at each typical retaining wall price, per wall.

Dallas's price band

Dallas is cheaper than 69% of the 195 US metros we price for retaining wall work.

Building a retaining wall in Dallas runs $2,400–$6,150 for the standard job — 4 ft high, 25 ft long, interlocking block on a gravel base — and most homeowners pay about $4,000. Repairs to a leaning or wet wall are $240–$1,400; tearing out a failed wall and rebuilding it is $29–$66 a square foot.

As a large metro with mid-range labor prices, Dallas prices a block wall about 5% below the US typical. Local pay drives it: construction laborers in Texas earn a median $40,620 a year (about 14% below the US median), while the block runs $2–$10 a unit at the yard wherever you live.

As a large metro with mid-range labor prices, Dallas prices a block wall about 5% below the US typical. Local pay drives it: construction laborers in Texas earn a median $40,620 a year (about 14% below the US median), while the block runs $2–$10 a unit at the yard wherever you live.

Comparing cities, or after the US-wide picture? See the national guide: Retaining wall cost in the USA.

Quick answer

$2,400–$6,150 to build a 4 ft × 25 ft segmental block retaining wall in Dallas — typically $4,000 or about $32 a square foot. Timber runs $1,900–$4,300 for the same wall, a 6 ft × 50 ft engineered wall $6,850–$17,650, and repairs $240–$1,400. Verified November 2026. Get free Dallas quotes →

  • Block wall, 4 ft × 25 ft: $2,400–$6,150 ($4,000 typical)
  • Per sq ft: timber $15–$33, block $19–$49, poured concrete $24–$57
  • Per linear ft: $38–$98 at 2 ft, $76–$196 at 4 ft, $137–$353 at 6 ft
  • Over 4 ft: permit $50–$450 + stamped design $390–$2,400
  • Repairs $240–$1,400; tear out and rebuild $29–$66 per sq ft

Prices verified November 2026 · Cross-referenced against 30+ American pricing sources · See methodology

Detailed pricing — Retaining wall cost in Dallas 2026

Installed prices with excavation, gravel base, drainage stone and pipe, backfill and cleanup unless the row says otherwise. Dallas metro, re-verified November 2026. Permits, stamped designs, caps, steps and old-wall removal are their own rows.

ServiceLowTypicalHigh
Segmental block retaining wall, 4 ft high × 25 ft long (100 sq ft), installedper wall$2,400per wall$4,000$6,150
Pressure-treated timber wall, 4 ft high × 25 ft long, installedper wall$1,900per wall$3,050$4,300
Small garden wall, 2 ft high × 20 ft long, block (40 sq ft)per wall$1,100per wall$1,850$2,850
Large wall, 6 ft high × 50 ft long, geogrid-reinforced block (300 sq ft), engineeredper wall$6,850per wall$11,500$17,650
Segmental (interlocking) concrete block, per sq ft of wall face, installedper sq ft$19per sq ft$32$49
Pressure-treated timber (6×6) wall, per sq ft, installedper sq ft$15per sq ft$24$33
Poured reinforced concrete wall, per sq ft, installedper sq ft$24per sq ft$38$57
Mortared concrete block (CMU) wall on a footing, per sq ft, installedper sq ft$19per sq ft$28$43
Natural stone wall (dry-stack or mortared), per sq ft, installedper sq ft$29per sq ft$52$85
Boulder (rock) wall, per sq ft, installedper sq ft$24per sq ft$36$47
Gabion (wire basket and rock) wall, per sq ft, installedper sq ft$15per sq ft$27$38
Block wall, 2 ft high, per linear ft, installedper linear ft$38per linear ft$64$98
Block wall, 4 ft high, per linear ft, installedper linear ft$76per linear ft$128$196
Block wall, 6 ft high with geogrid (engineered), per linear ft, installedper linear ft$137per linear ft$230$353
Stamped design by a licensed structural or civil engineer (walls over 4 ft or holding a surcharge)per wall$390per wall$955$2,400
Geotechnical (soils) report, where the city asks for oneper report$780per report$1,700$3,350
Building permit for a retaining wall (where required)per permit$50per permit$200$450
Drainage behind a new wall (perforated pipe, drainage stone, fabric), per linear ftper linear ft$10per linear ft$19$29
Excavation and site prep, per cubic yard removedper cu yd$48per cu yd$118$212
Cap blocks or coping on top of the wall, per linear ftper linear ft$10per linear ft$24$48
Steps built into the wall (3-5 risers), blockper set$390per set$1,150$2,350
Repair a failing section (re-set leaning blocks, fix drainage, cracks)per job$240per job$660$1,400
Tear out and rebuild a failed wall, per sq ft (demolition, haul-away, new wall)per sq ft$29per sq ft$47$66
Remove an old wall and haul it away, per sq ftper sq ft$10per sq ft$14$24
retaining wall jobs in Dallas: what they costPer sq ft, low to high with the typical price marked. Every line is in the table above.
Natural stone wall (dry-stack or mortared), per sq ft, installed $52$29–$85
Tear out and rebuild a failed wall, per sq ft (demolition, haul-away, new wall) $47$29–$66
Poured reinforced concrete wall, per sq ft, installed $38$24–$57
Boulder (rock) wall, per sq ft, installed $36$24–$47
Segmental (interlocking) concrete block, per sq ft of wall face, installed $32$19–$49
Mortared concrete block (CMU) wall on a footing, per sq ft, installed $28$19–$43
Gabion (wire basket and rock) wall, per sq ft, installed $27$15–$38
Pressure-treated timber (6×6) wall, per sq ft, installed $24$15–$33
Remove an old wall and haul it away, per sq ft $14$10–$24
Already got a quote?
Check it against these Dallas prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local retaining wall contractors in Dallas

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What kind of retaining wall do you need?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 30+ American pricing sources · See methodology

Prices cover the Dallas metro. Tight lots in Deep Ellum & Downtown cost more for hand-carrying and disposal; North Dallas & Richardson runs a little lower.

How retaining wall costs vary across Dallas

Retaining wall prices across Dallas

Where you live changes the labor, not the block. Tight access in Deep Ellum & Downtown costs the most; walls in North Dallas & Richardson price near the city typical, with longer runs.

Retaining wall prices across DallasTypical range by part of the metro, per wall. The line marks the Dallas typical.
Deep Ellum & Downtown6–12% above the city average $2,550–$6,900per wall
Oak Cliff & South DallasStandard to 5% above $2,450–$6,450per wall
North Dallas & RichardsonStandard; bigger walls, machine access $2,400–$6,350per wall
Arlington & IrvingStandard pricing $2,400–$6,150per wall

Deep Ellum & Downtown

6–12% above the city average
Deep Ellum, Downtown, Uptown, Design District
4 ft × 25 ft block wall
$2,550–$6,900 per wall
Block per sq ft
$20–$55 / sq ft of block wall

The priciest part of the metro for any wall: access, parking and disposal are the extra lines. A small wall here can cost as much per square foot as a big one in the suburbs.

Oak Cliff & South Dallas

Standard to 5% above
Oak Cliff, South Dallas, Pleasant Grove
4 ft × 25 ft block wall
$2,450–$6,450 per wall
Block per sq ft
$19–$51 / sq ft of block wall

Plenty of fix-and-flip and whole-yard work. Quotes vary widely; get two and make sure both include drainage stone and pipe.

North Dallas & Richardson

Standard; bigger walls, machine access
North Dallas, Richardson, Garland, Plano
4 ft × 25 ft block wall
$2,400–$6,350 per wall
Block per sq ft
$19–$50 / sq ft of block wall

Bigger yards, bigger walls. Expect average per-square-foot pricing plus more square feet, and a trip charge for the far edges.

Arlington & Irving

Standard pricing
Arlington, Irving, Grand Prairie, Mesquite
4 ft × 25 ft block wall
$2,400–$6,150 per wall
Block per sq ft
$19–$49 / sq ft of block wall

Established streets with a mix of house ages. Most walls price at the city average; mature trees and roots can add excavation time.

What you'll actually pay — job by job

Real-World Retaining Wall Costs in Dallas

Here's what common retaining wall jobs cost in Dallas in 2026, excavation, gravel base, drainage stone and pipe, backfill and cleanup included.

Garden wall, 2 ft × 20 ft, block — one day

$1,100–$2,850

Forty square feet of interlocking block on a gravel base with drainage stone behind it. No permit in most of Dallas at this height, and the most common DIY wall. Priced by a crew it comes to $1,100–$2,850, about $1,850 typical.

Standard wall, 4 ft × 25 ft, block — 2 to 3 days

$2,400–$6,150

The job every other price on this page is built around: $4,000 typical. Right at the permit line in most cities (4 ft measured from the bottom of the base), so a wall that ends up 4 ft 2 in. tall can suddenly need a permit ($50–$450) and a stamped design ($390–$2,400) — about $5,155 all in.

Same wall with caps and full drainage priced as lines

$2,900–$8,075

A cap course ($600 for 25 ft) and the perforated pipe, drainage stone and fabric ($475 for 25 ft) bring the standard wall to about $5,075 in Dallas. If a quote is far below $2,400, check whether these are in it.

Tall wall, 6 ft × 50 ft, geogrid-reinforced block — 1 to 2 weeks

$6,850–$17,650

Three hundred square feet of face, geogrid every other course tied back into compacted fill, a deeper base, a permit and a design by a licensed structural or civil engineer. $6,850–$17,650 in Dallas, about $11,500 typical. Many building departments would rather approve two 3 ft terraces.

Replace a rotted timber wall with block, 4 ft × 25 ft

$3,400–$8,550

Tear-out and haul-away of the old timbers ($1,000–$2,400 for 100 sq ft) plus the new block wall ($4,000) comes to about $5,400 in Dallas. A rebuild priced as one line is $29–$66 a square foot.

How much does a retaining wall cost in Dallas?

A 4 ft × 25 ft block wall in Dallas costs $2,400 to $6,150. The middle of the market, about $4,000, covers excavation, a 6-inch compacted gravel base, the block, 12 inches of drainage stone behind it with a perforated pipe, backfill and cleanup. Caps ($10–$48 a foot) and steps ($390–$2,350) are extra lines.

Height changes everything. Per linear foot in Dallas, a 2 ft wall is $38–$98, a 4 ft wall $76–$196 and a 6 ft geogrid-reinforced wall $137–$353 — and the taller wall also needs a permit ($50–$450) and a design stamped by a licensed structural or civil engineer ($390–$2,400). Prices re-checked against 30 sources in November 2026.

Retaining wall prices in Dallas (2026): by height, material and job

The standard 4 ft × 25 ft block wall costs $2,400–$6,150; per linear foot a 4 ft block wall is $76–$196, and a stamped design for a taller wall $390–$2,400.

Line on the quoteLowTypicalHigh
Block wall, 4 ft × 25 ft (100 sq ft), installed$2,400$4,000$6,150
Timber wall, 4 ft × 25 ft, installed$1,900$3,050$4,300
Block wall, 2 ft high, per linear ft$38$64$98
Block wall, 4 ft high, per linear ft$76$128$196
Block wall, 6 ft high with geogrid, per linear ft$137$230$353
Stamped design, licensed structural or civil engineer$390$955$2,400
Building permit (where required)$50$200$450
Repair a failing section$240$660$1,400

The 4 ft line matters in Dallas: a wall measured at 4 ft from the bottom of its base and holding only level ground usually needs no permit; add a few inches, a slope above it or a driveway behind it and the permit ($50–$450) and stamped design ($390–$2,400) come into the price.

What moves a retaining wall quote in Dallas:

  • Height — per linear foot, 2 ft is $38–$98, 4 ft $76–$196 and 6 ft with geogrid $137–$353; past 4 ft add the permit and design.
  • Material — timber $15–$33, block $19–$49, poured concrete $24–$57, stone $29–$85 per square foot.
  • Access and slope — a wall a skid steer can reach prices normally; wheelbarrow access or a steep slope adds 50% or more to labor.
  • What is behind the wall — a driveway, a slope or a patio above the wall is a surcharge; it needs a stronger design and usually a permit at any height.
  • Old wall removal — $10–$24 a square foot to tear out and haul away what is there now.

Ask every Dallas contractor the same five things: the finished height and where it is measured from, the base depth and gravel, how much drainage stone and pipe go behind the wall, whether geogrid is in the price, and who pulls the permit. Compare those, not the headline price. Get a quote for your retaining wall job →

Retaining Wall Cost in Dallas by Size

Quick answer

Garden wall, 2 ft × 20 ft: $1,100–$2,850. Standard wall, 4 ft × 25 ft: $2,400–$6,150. Tall wall, 6 ft × 50 ft, geogrid-reinforced and engineered: $6,850–$17,650. Per linear foot: $38–$98 at 2 ft, $76–$196 at 4 ft, $137–$353 at 6 ft.

Worked example: a Dallas homeowner with a 25 ft grade change could build one 4 ft block wall for about $4,000, or two 2 ft terraces — 50 linear feet at $64 a foot, about $3,200 — with no permit, no stamped design and planting beds between them. The terraces cost less up front but skip the $1,155 of permit and design the 4 ft wall risks if it measures over the line.

Length is cheap, height is dear. Doubling the 4 ft wall to 50 ft roughly doubles the price to about $6,400; raising it to 6 ft instead takes 50 feet to $11,500 because of geogrid, the deeper base, the permit and the design — a 80% premium for the extra two feet.

Dallas Retaining Wall Costs by Material and Height

Material or heightCostBest for
Segmental (interlocking) concrete block$19–$49 per sq ftThe standard residential wall: dry-stacked on a gravel base, no mortar or footing. Lasts 50+ years; geogrid takes it past 4 ft.
Pressure-treated timber (6 × 6)$15–$33 per sq ftThe cheapest wall to build and the shortest-lived: 10–40 years before rot sets in, less in wet ground.
Poured reinforced concrete$24–$57 per sq ftTall walls, tight sites, driveways and anything holding a load. Needs forms, rebar and a footing below frost; can be faced with veneer.
Mortared concrete block (CMU) on a footing$19–$43 per sq ftGrouted, rebar-reinforced block on a poured footing, usually stuccoed or veneered. Common in California and the Southwest.
Natural stone$29–$85 per sq ftLooks, longevity (50–200 years) and the most skilled labor. Dry-stack fieldstone sits at the low end; cut, mortared stone at the top.
Boulder (rock) wall$24–$47 per sq ftBig landscape walls where a machine can set 1–3 ft rocks. Cheap per square foot where rock is local; needs room to work.
Gabion (wire baskets filled with rock)$15–$38 per sq ftDrains through itself, so no pipe behind it. Industrial look; good on creek banks and long low slopes.
Block wall, 2 ft high$38–$98 per linear ftGarden beds and grade changes under 2 ft: no permit almost anywhere, often a weekend DIY job.
Block wall, 4 ft high$76–$196 per linear ftThe most common height. Right at the permit line in most cities (measured from the bottom of the base), so check before you dig.
Block wall, 6 ft high, geogrid-reinforced$137–$353 per linear ftNeeds a permit, a stamped design and geogrid layers tied back into the soil. Many cities would rather see two 3 ft terraces.
Repair a failing wall$240–$1,400 per jobLeaning blocks re-set, a drain added, cracks filled. Worth it when the base is sound; a bulge low down usually means a rebuild.
Tear out and rebuild$29–$66 per sq ftWalls that have moved more than a few inches, timber that has rotted through, or any wall with no drainage behind it.
Cost by material or height in DallasTypical range, per sq ft.
Segmental (interlocking) concrete block $19–$49per sq ft
Pressure-treated timber (6 × 6) $15–$33per sq ft
Poured reinforced concrete $24–$57per sq ft
Mortared concrete block (CMU) on a footing $19–$43per sq ft
Natural stone $29–$85per sq ft
Boulder (rock) wall $24–$47per sq ft
Gabion (wire baskets filled with rock) $15–$38per sq ft
Tear out and rebuild $29–$66per sq ft
Dallas tip: if anything sits above the wall — a slope, a driveway, a shed, a patio — say so when you ask for quotes. That surcharge changes the design and usually brings in the permit ($50–$450) and a stamped design ($390–$2,400) at any height.

Per square foot vs the whole wall — the Dallas retaining wall bill

Block costs $19–$49 a square foot of wall face installed in Dallas, so 100 square feet should be $1,900–$4,900. The standard wall prices at $2,400–$6,150 because every job also carries fixed costs — a machine or a crew's hand-carry, a pallet delivery, spoil haul-away and cleanup — worth about $500–$1,250 on a wall this size. The smaller the wall, the bigger that share.

That is why a 2 ft × 20 ft garden wall ($1,100–$2,850) costs far more per square foot than a 6 ft × 50 ft wall ($6,850–$17,650), and why a quote for a short wall that looks high per square foot can still be fair. Compare whole-job prices for small walls and per-square-foot prices for long ones.

What's included in a Dallas retaining wall quote (and what costs extra)

A standard block-wall price covers excavation, a compacted gravel base, the block, drainage stone and a perforated pipe behind the wall, backfill, compaction and cleanup. The headline price often leaves out:

  • Cap blocks or coping — $10–$48 a linear foot
  • Permit and stamped design — $50–$450 and $390–$2,400 once the wall passes 4 ft or holds a surcharge
  • Removing an old wall — $10–$24 a square foot, haul-away included
  • Steps, lighting and a fence or railing on top — steps run $390–$2,350 a set; a fence on top changes the design

Ask for the base depth, drainage stone width, geogrid and permit responsibility in writing, and for proof of liability insurance.

What Affects Retaining Wall Costs in Dallas

Height, and where it is measured from

A 2 ft block wall is $38–$98 a linear foot in Dallas, a 4 ft wall $76–$196, and a 6 ft geogrid-reinforced wall $137–$353. Building departments measure from the bottom of the footing or base course, not the ground, so a wall with 6+ inches buried can cross the 4 ft permit line before it looks 4 ft tall.

Material

Timber $15–$33, gabion $15–$38, block $19–$49, boulder $24–$47, poured concrete $24–$57 and natural stone $29–$85 a square foot. Timber is cheapest and shortest-lived; stone the dearest and longest.

Drainage and base

A proper wall sits on at least 6 inches of compacted gravel with 12 inches of drainage stone and a perforated pipe behind it. Priced as lines, drainage is $10–$29 a linear foot and excavation $48–$212 a cubic yard; skipping either is how walls fail.

Permits, design and soil

Past 4 ft, or at any height with a slope or driveway above it, most cities want a permit ($50–$450) and a design stamped by a licensed structural or civil engineer ($390–$2,400); some ask for a geotechnical report ($780–$3,350).

Access and site

A flat yard a skid steer can reach is the low end. A side yard where block and gravel are wheelbarrowed in, a steep slope, roots, or an old wall to remove ($10–$24 a square foot) push the job toward $6,150 and beyond.

Labor rates in Dallas

Construction laborers in Texas earn a median $40,620 a year in federal wage data, about 14% below the US median. Crews bill about $45–$90 an hour here, and labor is roughly 60% of a block-wall bill, so Dallas prices land about 5% below the US typical of $4,200.

Season

Spring and early summer are the rush, when quotes run higher and slots fill weeks ahead. Frozen ground stops base work in cold-winter metros; in hot ones crews prefer fall and winter. Late fall is often the cheapest time to book in Dallas.

How to Save Money on a Retaining Wall in Dallas
  1. Stay under the permit line.A wall that measures under 4 ft from the bottom of its base, holding level ground, usually needs no permit or stamped design in Dallas — saving $50–$450 and $390–$2,400. Two short terraces often cost less than one tall wall.
  2. Pick block over poured concrete where it works.Segmental block is $19–$49 a square foot against $24–$57 for poured concrete in Dallas, needs no forms or footing, and lasts as long for walls under 6 ft.
  3. Do the demolition yourself.Tearing out an old timber wall and stacking it for pickup saves $10–$24 a square foot — $1,000–$2,400 on a 100 sq ft wall. Leave the digging to the crew; the base is where walls fail.
  4. Combine it with other hardscape.A crew already on site with a skid steer and a dump trailer can add a patio edge, steps or a second terrace for far less than a separate visit.
  5. Book the slow season.Spring is the rush in Dallas. Late fall, before the ground freezes, or winter in warm metros, is when crews have open weeks and sharper prices.
  6. Never cut the drainage.Drainage stone, pipe and fabric cost $250–$725 on a 25 ft wall; a wall built without them is the one you rebuild at $29–$66 a square foot.
Retaining Wall Cost in Dallas: What the Quote Should Include

Dallas contractors quote by the job, by the square foot or by the linear foot. Before you pay a deposit, get these in writing:

  • Length and finished height, and where the height is measured from (bottom of base to top of wall)
  • The material, on its own line — block brand and size, timber grade, concrete strength
  • Excavation, spoil haul-away and backfill, with the gravel base depth stated
  • Drainage: perforated pipe, drainage stone width and filter fabric, and where the pipe outlets
  • Geogrid layers and spacing on any wall over 3–4 ft
  • Who pulls the permit and pays for the stamped design, and whether a soils report is needed
  • Old wall removal and disposal, included or listed
  • Caps, steps, lighting and any fence or railing on top; warranty, dates and payment stages
Frequently asked questions — Retaining wall cost in Dallas
How much does a retaining wall cost in Dallas?

$2,400–$6,150 for a 4 ft high, 25 ft long segmental block wall installed, and $4,000 is typical — about $32 a square foot of wall face. Timber is $1,900–$4,300 for the same wall; poured concrete about $2,900–$6,950.

How much is a retaining wall per linear foot in Dallas?

For block, $38–$98 at 2 ft high, $76–$196 at 4 ft and $137–$353 at 6 ft with geogrid. Timber runs lower, poured concrete and stone higher.

How much is a retaining wall per square foot in Dallas?

Timber $15–$33, gabion $15–$38, block $19–$49, boulder $24–$47, poured concrete $24–$57 and natural stone $29–$85 per square foot of wall face, installed.

Do I need a permit for a retaining wall in Dallas?

In most of Texas, a retaining wall up to 4 ft tall measured from the bottom of the footing that holds back only level ground needs no building permit; taller walls, or any wall with a slope, driveway or structure above it, need a permit and usually a design stamped by a licensed structural or civil engineer. Check with the city before you dig.

How much does it cost to repair a retaining wall in Dallas?

$240–$1,400 for a typical repair — re-setting leaning blocks, adding a drain, filling cracks. Adding drainage to an existing wall runs $60–$70 a linear foot with excavation. A wall that has moved more than a few inches is usually rebuilt at $29–$66 a square foot.

What does it cost to replace an old timber wall with block in Dallas?

About $3,400–$8,550 for a 4 ft × 25 ft wall: $1,000–$2,400 to tear out and haul away the timbers plus $2,400–$6,150 for the new block wall.

Timber or block — which is cheaper?

Timber to build: $15–$33 a square foot against $19–$49 for block in Dallas. Block to own: it lasts 50+ years where treated timber gives 10–40 before rot, and a timber wall's second build costs more than block would have the first time.

What does a stamped design or a soils report cost?

A design by a licensed structural or civil engineer runs $390–$2,400 for a residential wall ($100–$220 an hour); a geotechnical report, where the city asks for one, $780–$3,350. Both are normal on walls over 4 ft or walls holding a slope or driveway.

How long does it take to build?

One day for a 2 ft garden wall, two to three days for the standard 4 ft × 25 ft block wall, and one to two weeks for a 6 ft × 50 ft reinforced wall including inspections. Add a few weeks up front if a permit and design are needed.

What's included in a Dallas retaining wall quote?

Excavation, a compacted gravel base, the block, drainage stone and pipe, backfill and cleanup. Often extra: caps ($10–$48 a foot), the permit ($50–$450), the stamped design ($390–$2,400), steps ($390–$2,350) and removing an old wall ($10–$24 a square foot).

Prices verified November 2026 · Cross-referenced against 30+ American pricing sources · See methodology

Prices for the Dallas metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, platform data, dated contractor price pages, big-box material prices, block makers' installation standards, city codes and federal wage data. No contractor can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read our full methodology →

Get a fair retaining wall quote in Dallas

Local retaining wall contractors · Free quotes · No obligation, no spam.

Get quotes in Dallas →Max 2 retaining wall contractors will contact you
Get quotes in DallasMax 2 retaining wall contractors · free · no spam→