Roof Replacement Cost USA 2026
By Our research team · Last verified · 13 min read · Methodology
Roof replacement costs in the US
What most homeowners pay for roofing job, tear-off of one layer, disposal, underlayment, flashing, ridge vent and cleanup included. Pick your city for local prices.
How we get this data- Typical
- $12,000
- Low end
- $6,000
- High end
- $25,000
Replacing a 2,000 sq ft roof costs $8,000–$17,000 in the US in 2026 with architectural asphalt shingles, the old roof torn off and hauled away, and most homeowners pay about $12,000. That is $400–$850 a square (100 sq ft of roof). The same roof in 3-tab shingles is $6,000–$10,500, in Class 4 impact-resistant shingles $9,500–$21,000, in standing-seam metal $18,000–$34,000 and in concrete tile $14,000–$36,000; a minor leak repair is $150–$1,000.
$8,000–$17,000 to replace a 2,000 sq ft roof in the US — architectural asphalt shingles, old roof torn off, 20 squares, installed — $12,000 typical. Per square: $400–$850. Standing-seam metal takes the same roof to $18,000–$34,000, concrete tile to $14,000–$36,000; a minor leak repair is $150–$1,000. Verified November 2026. Pick your city ↓
- 2,000 sq ft roof, architectural shingles, tear-off included: $8,000–$17,000 ($12,000 typical)
- Per square installed: 3-tab $300–$525; architectural $400–$850; standing seam $900–$1,700
- By size: 1,500 sq ft $6,000–$12,750; 3,000 sq ft $12,000–$25,500; steep two-story 2,500 sq ft $11,000–$24,250
- Repairs: leak $150–$1,000; flashing $300–$1,500; decking $65–$160 a sheet
- Pick a city below for local prices across 195 US metros
Prices below come from national cost guides, competitive-bid data on a standardized 20-square scope, insurer and claims data, retailer shelf prices for shingles and underlayment, dated local price pages, city permit schedules, state licensing boards, the model building code and federal wage data for roofers, applied across 195 US metros and re-checked in November 2026 against 221 sources.
A plain gable roof in 3-tab shingles on a one-story home in a cheap market can come in near $6,000; the same 20 squares on a steep, cut-up roof with a second layer, rotted decking and premium shingles in a top-cost metro can reach $25,000. The typical US job, $12,000, is a 20-square architectural roof with one layer torn off, synthetic underlayment, new flashing and a ridge vent.
Prices verified November 2026 · Cross-referenced against 221+ American pricing sources · See methodology
Roof replacement cost by city
Typical roof replacement ranges, re-verified November 2026 across 221+ sources. Largest cities first.
Among the biggest metros, Los Angeles is the priciest at $14,400 and Phoenix the least at $11,300.
Half of the 195 metros we price sit between $11,100 and $12,100.
| City | Typical range |
|---|---|
| New York, NY | $9,200–$18,500 installed |
| Los Angeles, CA | $9,600–$19,100 installed |
| Chicago, IL | $8,900–$18,200 installed |
| Dallas, TX | $7,800–$16,400 installed |
| Houston, TX | $7,800–$16,400 installed |
| Washington, DC | $8,900–$18,200 installed |
| Atlanta, GA | $7,800–$16,400 installed |
| Philadelphia, PA | $8,400–$17,500 installed |
| Miami, FL | $8,200–$17,200 installed |
| Phoenix, AZ | $7,700–$16,000 installed |
| Boston, MA | $8,700–$17,800 installed |
| San Francisco, CA | $9,300–$18,700 installed |
| Riverside, CA | $7,900–$16,700 installed |
| Detroit, MI | $7,900–$16,800 installed |
| Seattle, WA | $9,100–$18,400 installed |
| Minneapolis, MN | $8,200–$17,300 installed |
| San Diego, CA | $8,800–$18,100 installed |
| Tampa, FL | $8,100–$17,100 installed |
| Orange County, CA | $8,300–$17,400 installed |
| Denver, CO | $8,300–$17,400 installed |
| Oakland, CA | $8,700–$17,900 installed |
| Charlotte, NC | $7,700–$16,100 installed |
| Baltimore, MD | $7,900–$16,600 installed |
| St. Louis, MO | $8,100–$17,200 installed |
| Orlando, FL | $8,000–$16,800 installed |
| Brooklyn, NY | $8,900–$18,200 installed |
| San Antonio, TX | $7,700–$15,900 installed |
| Fort Worth, TX | $7,700–$16,000 installed |
| Austin, TX | $7,800–$16,100 installed |
| Portland, OR | $8,400–$17,500 installed |
| Sacramento, CA | $8,800–$18,100 installed |
| Pittsburgh, PA | $8,000–$16,900 installed |
| Las Vegas, NV | $7,600–$15,500 installed |
| Cincinnati, OH | $7,700–$15,900 installed |
| Kansas City, MO | $7,800–$16,400 installed |
| Columbus, OH | $7,700–$16,100 installed |
| Newark, NJ | $8,700–$17,900 installed |
| Nashville, TN | $7,700–$15,800 installed |
| Indianapolis, IN | $7,700–$15,900 installed |
| Cleveland, OH | $7,800–$16,200 installed |
| San Jose, CA | $8,700–$17,900 installed |
| Fort Lauderdale, FL | $7,800–$16,300 installed |
| Virginia Beach, VA | $7,700–$16,000 installed |
| Jacksonville, FL | $7,900–$16,600 installed |
| Providence, RI | $8,300–$17,400 installed |
| Milwaukee, WI | $8,000–$16,900 installed |
| Raleigh, NC | $7,800–$16,400 installed |
| Oklahoma City, OK | $7,700–$16,000 installed |
| West Palm Beach, FL | $7,700–$16,100 installed |
| New Orleans, LA | $7,800–$16,300 installed |
| Memphis, TN | $7,500–$15,400 installed |
| Richmond, VA | $7,700–$15,900 installed |
| Louisville, KY | $7,500–$15,300 installed |
| Salt Lake City, UT | $7,800–$16,400 installed |
| Hartford, CT | $8,300–$17,400 installed |
| Birmingham, AL | $7,600–$15,800 installed |
| Buffalo, NY | $8,400–$17,500 installed |
| Rochester, NY | $8,000–$16,900 installed |
| Grand Rapids, MI | $7,900–$16,600 installed |
| Tucson, AZ | $7,300–$14,500 installed |
| Honolulu, HI | $8,200–$17,200 installed |
| Tulsa, OK | $7,600–$15,600 installed |
| Fresno, CA | $8,700–$17,900 installed |
| Omaha, NE | $7,700–$15,900 installed |
| St. Petersburg, FL | $7,700–$16,000 installed |
| Worcester, MA | $8,300–$17,400 installed |
| Bridgeport, CT | $8,200–$17,300 installed |
| Greenville, SC | $7,600–$15,500 installed |
| Tacoma, WA | $8,300–$17,300 installed |
| Albuquerque, NM | $7,800–$16,300 installed |
| Bakersfield, CA | $8,100–$17,100 installed |
| Albany, NY | $8,000–$17,000 installed |
| Knoxville, TN | $7,500–$15,200 installed |
| McAllen, TX | $7,600–$15,400 installed |
| Baton Rouge, LA | $7,800–$16,400 installed |
| El Paso, TX | $7,600–$15,700 installed |
| Sarasota, FL | $7,700–$16,000 installed |
| New Haven, CT | $8,100–$17,100 installed |
| Columbia, SC | $7,900–$16,500 installed |
| Oxnard, CA | $7,900–$16,800 installed |
| Charleston, SC | $7,900–$16,500 installed |
| Dayton, OH | $7,700–$15,800 installed |
| Boise, ID | $8,100–$17,200 installed |
| Fort Myers, FL | $7,700–$15,800 installed |
| Stockton, CA | $7,900–$16,500 installed |
| Greensboro, NC | $7,700–$15,800 installed |
| Lakeland, FL | $7,600–$15,800 installed |
| Colorado Springs, CO | $7,900–$16,800 installed |
| Little Rock, AR | $7,600–$15,500 installed |
| Des Moines, IA | $7,600–$15,700 installed |
| Wilmington, DE | $8,000–$17,000 installed |
| Akron, OH | $7,900–$16,700 installed |
| Daytona Beach, FL | $7,700–$15,800 installed |
| Provo, UT | $7,600–$15,400 installed |
| Springfield, MA | $8,100–$17,100 installed |
| Ogden, UT | $7,800–$16,100 installed |
| Winston-Salem, NC | $7,600–$15,400 installed |
| Madison, WI | $7,900–$16,600 installed |
| Syracuse, NY | $7,900–$16,700 installed |
| Durham, NC | $7,800–$16,500 installed |
| Wichita, KS | $7,700–$15,800 installed |
| Toledo, OH | $7,700–$16,000 installed |
| Augusta, GA | $7,600–$15,400 installed |
| Palm Bay, FL | $7,700–$16,000 installed |
| Jackson, MS | $7,600–$15,600 installed |
| Harrisburg, PA | $7,900–$16,800 installed |
| Spokane, WA | $7,900–$16,800 installed |
| Chattanooga, TN | $7,800–$16,100 installed |
| Fayetteville, AR | $7,600–$15,700 installed |
| Scranton, PA | $7,800–$16,400 installed |
| Portland, ME | $7,800–$16,200 installed |
| Modesto, CA | $7,900–$16,500 installed |
| Lansing, MI | $7,900–$16,700 installed |
| Youngstown, OH | $7,700–$16,000 installed |
| Fayetteville, NC | $7,600–$15,700 installed |
| Lexington, KY | $7,700–$15,800 installed |
| Huntsville, AL | $7,700–$15,800 installed |
| Pensacola, FL | $7,600–$15,700 installed |
| Myrtle Beach, SC | $7,600–$15,400 installed |
| Mesa, AZ | $7,700–$16,100 installed |
| Reno, NV | $8,500–$17,600 installed |
| Springfield, MO | $7,600–$15,400 installed |
| Santa Rosa, CA | $8,300–$17,400 installed |
| Asheville, NC | $7,700–$15,900 installed |
| Killeen, TX | $7,600–$15,500 installed |
| Visalia, CA | $7,900–$16,500 installed |
| Lafayette, LA | $7,600–$15,700 installed |
| Long Beach, CA | $8,300–$17,400 installed |
| Santa Barbara, CA | $8,000–$17,000 installed |
| Salinas, CA | $8,200–$17,300 installed |
| Mobile, AL | $7,700–$15,900 installed |
| Corpus Christi, TX | $7,700–$15,900 installed |
| Manchester, NH | $8,000–$17,000 installed |
| Salem, OR | $7,800–$16,300 installed |
| Fort Wayne, IN | $7,900–$16,700 installed |
| Brownsville, TX | $7,600–$15,400 installed |
| Gulfport, MS | $7,700–$15,900 installed |
| Appleton, WI | $8,000–$17,000 installed |
| Savannah, GA | $7,600–$15,600 installed |
| Anchorage, AK | $8,200–$17,300 installed |
| Beaumont, TX | $7,600–$15,800 installed |
| Flint, MI | $8,300–$17,400 installed |
| Peoria, IL | $8,500–$17,600 installed |
| Canton, OH | $7,700–$16,000 installed |
| Arlington, TX | $7,700–$16,000 installed |
| Shreveport, LA | $7,600–$15,600 installed |
| Tallahassee, FL | $7,600–$15,500 installed |
| Montgomery, AL | $7,600–$15,400 installed |
| Trenton, NJ | $8,500–$17,600 installed |
| Eugene, OR | $7,900–$16,600 installed |
| Davenport, IA | $7,900–$16,600 installed |
| Ann Arbor, MI | $8,100–$17,100 installed |
| Fort Collins, CO | $7,700–$15,900 installed |
| Gainesville, FL | $7,700–$15,800 installed |
| Lincoln, NE | $7,600–$15,800 installed |
| Rockford, IL | $8,500–$17,600 installed |
| Lubbock, TX | $7,600–$15,400 installed |
| Columbus, GA | $7,600–$15,400 installed |
| Boulder, CO | $7,800–$16,200 installed |
| Green Bay, WI | $7,900–$16,700 installed |
| Evansville, IN | $8,100–$17,100 installed |
| South Bend, IN | $7,900–$16,700 installed |
| Roanoke, VA | $7,600–$15,700 installed |
| Sioux Falls, SD | $7,700–$16,000 installed |
| Wilmington, NC | $7,700–$15,900 installed |
| Stamford, CT | $8,200–$17,300 installed |
| Waco, TX | $7,600–$15,700 installed |
| Jersey City, NJ | $8,700–$17,900 installed |
| Duluth, MN | $8,200–$17,200 installed |
| Laredo, TX | $7,600–$15,400 installed |
| Cedar Rapids, IA | $7,600–$15,600 installed |
| Tuscaloosa, AL | $7,700–$15,900 installed |
| Amarillo, TX | $7,600–$15,400 installed |
| Erie, PA | $7,800–$16,200 installed |
| Atlantic City, NJ | $8,300–$17,400 installed |
| Fargo, ND | $7,900–$16,800 installed |
| Charleston, WV | $7,900–$16,600 installed |
| Norfolk, VA | $7,700–$16,000 installed |
| Macon, GA | $7,600–$15,500 installed |
| Champaign, IL | $8,500–$17,600 installed |
| Burlington, VT | $8,200–$17,300 installed |
| Topeka, KS | $7,700–$16,000 installed |
| Rochester, MN | $8,100–$17,100 installed |
| Athens, GA | $7,600–$15,400 installed |
| Las Cruces, NM | $7,600–$15,600 installed |
| Columbia, MO | $7,600–$15,400 installed |
| St. George, UT | $7,600–$15,700 installed |
| Hilo, HI | $8,000–$17,000 installed |
| Billings, MT | $7,800–$16,300 installed |
| Greenville, NC | $7,600–$15,400 installed |
| Hattiesburg, MS | $7,600–$15,400 installed |
| Santa Fe, NM | $7,700–$15,800 installed |
| Missoula, MT | $7,900–$16,800 installed |
| Cheyenne, WY | $7,600–$15,700 installed |
| Fairbanks, AK | $8,300–$17,300 installed |
Each city page has local rates by area, real-world roof replacement costs and a city-specific FAQ. Prices shown are the low end of the typical range, installed.
Alabama
- Birminghamfrom $7,600
- Huntsvillefrom $7,700
- Mobilefrom $7,700
- Montgomeryfrom $7,600
- Tuscaloosafrom $7,700
Arkansas
- Little Rockfrom $7,600
- Fayettevillefrom $7,600
California
- Los Angelesfrom $9,600
- San Franciscofrom $9,300
- Riversidefrom $7,900
- San Diegofrom $8,800
- Orange Countyfrom $8,300
- Oaklandfrom $8,700
- Sacramentofrom $8,800
- San Josefrom $8,700
- Fresnofrom $8,700
- Bakersfieldfrom $8,100
- Oxnardfrom $7,900
- Stocktonfrom $7,900
- Modestofrom $7,900
- Santa Rosafrom $8,300
- Visaliafrom $7,900
- Long Beachfrom $8,300
- Santa Barbarafrom $8,000
- Salinasfrom $8,200
Colorado
- Denverfrom $8,300
- Colorado Springsfrom $7,900
- Fort Collinsfrom $7,700
- Boulderfrom $7,800
Connecticut
- Hartfordfrom $8,300
- Bridgeportfrom $8,200
- New Havenfrom $8,100
- Stamfordfrom $8,200
Delaware
- Wilmingtonfrom $8,000
District of Columbia
- Washingtonfrom $8,900
Florida
- Miamifrom $8,200
- Tampafrom $8,100
- Orlandofrom $8,000
- Fort Lauderdalefrom $7,800
- Jacksonvillefrom $7,900
- West Palm Beachfrom $7,700
- St. Petersburgfrom $7,700
- Sarasotafrom $7,700
- Fort Myersfrom $7,700
- Lakelandfrom $7,600
- Daytona Beachfrom $7,700
- Palm Bayfrom $7,700
- Pensacolafrom $7,600
- Tallahasseefrom $7,600
- Gainesvillefrom $7,700
Georgia
Idaho
- Boisefrom $8,100
Indiana
- Indianapolisfrom $7,700
- Fort Waynefrom $7,900
- Evansvillefrom $8,100
- South Bendfrom $7,900
Iowa
- Des Moinesfrom $7,600
- Davenportfrom $7,900
- Cedar Rapidsfrom $7,600
Kentucky
- Louisvillefrom $7,500
- Lexingtonfrom $7,700
Louisiana
- New Orleansfrom $7,800
- Baton Rougefrom $7,800
- Lafayettefrom $7,600
- Shreveportfrom $7,600
Maine
- Portlandfrom $7,800
Maryland
- Baltimorefrom $7,900
Massachusetts
- Bostonfrom $8,700
- Worcesterfrom $8,300
- Springfieldfrom $8,100
Michigan
- Detroitfrom $7,900
- Grand Rapidsfrom $7,900
- Lansingfrom $7,900
- Flintfrom $8,300
- Ann Arborfrom $8,100
Minnesota
- Minneapolisfrom $8,200
- Duluthfrom $8,200
- Rochesterfrom $8,100
Mississippi
- Jacksonfrom $7,600
- Gulfportfrom $7,700
- Hattiesburgfrom $7,600
Missouri
- St. Louisfrom $8,100
- Kansas Cityfrom $7,800
- Springfieldfrom $7,600
- Columbiafrom $7,600
New Hampshire
- Manchesterfrom $8,000
New Jersey
- Newarkfrom $8,700
- Trentonfrom $8,500
- Jersey Cityfrom $8,700
- Atlantic Cityfrom $8,300
New Mexico
- Albuquerquefrom $7,800
- Las Crucesfrom $7,600
- Santa Fefrom $7,700
New York
North Carolina
- Charlottefrom $7,700
- Raleighfrom $7,800
- Greensborofrom $7,700
- Winston-Salemfrom $7,600
- Durhamfrom $7,800
- Fayettevillefrom $7,600
- Ashevillefrom $7,700
- Wilmingtonfrom $7,700
- Greenvillefrom $7,600
North Dakota
- Fargofrom $7,900
Ohio
- Cincinnatifrom $7,700
- Columbusfrom $7,700
- Clevelandfrom $7,800
- Daytonfrom $7,700
- Akronfrom $7,900
- Toledofrom $7,700
- Youngstownfrom $7,700
- Cantonfrom $7,700
Oklahoma
- Oklahoma Cityfrom $7,700
- Tulsafrom $7,600
Pennsylvania
- Philadelphiafrom $8,400
- Pittsburghfrom $8,000
- Harrisburgfrom $7,900
- Scrantonfrom $7,800
- Eriefrom $7,800
Rhode Island
- Providencefrom $8,300
South Carolina
- Greenvillefrom $7,600
- Columbiafrom $7,900
- Charlestonfrom $7,900
- Myrtle Beachfrom $7,600
South Dakota
- Sioux Fallsfrom $7,700
Tennessee
- Nashvillefrom $7,700
- Memphisfrom $7,500
- Knoxvillefrom $7,500
- Chattanoogafrom $7,800
Texas
- Dallasfrom $7,800
- Houstonfrom $7,800
- San Antoniofrom $7,700
- Fort Worthfrom $7,700
- Austinfrom $7,800
- McAllenfrom $7,600
- El Pasofrom $7,600
- Killeenfrom $7,600
- Corpus Christifrom $7,700
- Brownsvillefrom $7,600
- Beaumontfrom $7,600
- Arlingtonfrom $7,700
- Lubbockfrom $7,600
- Wacofrom $7,600
- Laredofrom $7,600
- Amarillofrom $7,600
Utah
- Salt Lake Cityfrom $7,800
- Provofrom $7,600
- Ogdenfrom $7,800
- St. Georgefrom $7,600
Vermont
- Burlingtonfrom $8,200
Virginia
- Virginia Beachfrom $7,700
- Richmondfrom $7,700
- Roanokefrom $7,600
- Norfolkfrom $7,700
West Virginia
- Charlestonfrom $7,900
Wyoming
- Cheyennefrom $7,600
Roof replacement prices, 2026
| Job | Low | Typical | High |
|---|---|---|---|
| Replace roof, 2,000 sq ft (20 squares), architectural asphalt shingles, tear-off includedinstalled | $8,000 | $12,000 | $17,000 |
| Replace roof, 1,500 sq ft (15 squares), architectural shingles, tear-off includedinstalled | $6,000 | $9,000 | $12,750 |
| Replace roof, 2,500 sq ft (25 squares), architectural shingles, tear-off includedinstalled | $10,000 | $15,000 | $21,250 |
| Replace roof, 3,000 sq ft (30 squares), architectural shingles, tear-off includedinstalled | $12,000 | $18,000 | $25,500 |
| Replace roof, 2,500 sq ft steep or two-story roof (25 squares plus the steep-pitch add)installed | $11,000 | $17,000 | $24,250 |
| 3-tab asphalt shingles, per square (100 sq ft), installed with tear-offper square | $300 | $400 | $525 |
| Architectural asphalt shingles, per square, installed with tear-offper square | $400 | $600 | $850 |
| Class 4 impact-resistant shingle upgrade, per square (add to the architectural price)per square | $75 | $125 | $200 |
| Standing-seam metal roof, per square, installedper square | $900 | $1,250 | $1,700 |
| Concrete tile roof, new tile, per square, installedper square | $700 | $1,050 | $1,800 |
| Clay tile roof, new tile, per square, installedper square | $850 | $1,400 | $2,400 |
| Natural slate roof, per square, installedper square | $1,000 | $1,800 | $3,000 |
| Tile roof lift and relay: new underlayment, same tiles reused, per squareper square | $400 | $600 | $900 |
| Flat or low-slope roof, TPO or EPDM membrane, per square, installedper square | $350 | $700 | $1,000 |
| Tear-off and disposal of the old shingles, one layer, per squareper square | $100 | $175 | $300 |
| Replace rotted roof decking, per 4 × 8 ft sheet, installedper sheet | $65 | $110 | $160 |
| Synthetic underlayment and ice-and-water shield upgrade over felt, per squareper square | $40 | $80 | $125 |
| Replace chimney, wall or valley flashingper job | $300 | $700 | $1,500 |
| Ridge vent, about 40 ft, installedper job | $300 | $450 | $650 |
| Install a new fixed skylight, standard size, flashed into the roofinstalled | $1,600 | $2,900 | $4,200 |
| Detach and reset 20 solar panels for a re-roofper job | $4,000 | $5,000 | $6,000 |
| Roof inspection with written reportper visit | $100 | $240 | $400 |
| Roof leak repair, minor (one leak, a few shingles)per job | $150 | $550 | $1,000 |
| Roof repair, moderate (shingles and underlayment over about 100 sq ft)per job | $1,000 | $1,800 | $3,000 |
Prices verified November 2026 · Cross-referenced against 221+ American pricing sources · See methodology
National average prices. Select a city above for location-specific pricing.
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local roofers
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What kind of roofing job is it?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the roofers who reply.
Where should they text you?
- Max 2 roofers. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched roofers see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 roofers about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Asphalt, Metal, Tile, Slate: Roof Costs by Material
Architectural asphalt shingles are $400–$850 a square installed with tear-off, 3-tab $300–$525, standing-seam metal $900–$1,700, concrete tile $700–$1,800, clay $850–$2,400 and natural slate $1,000–$3,000. Prices include tear-off of one layer, underlayment, flashing and cleanup.
| Material | Cost | Best for |
|---|---|---|
| Architectural asphalt shingles | $400–$850 per square | The standard US roof (about three in four homes): 25–30 years, Class A fire rating, wide color choice. A 20-square roof runs $8,000–$17,000. |
| 3-tab asphalt shingles | $300–$525 per square | The cheapest roof that meets code; flat look, 15–20 years. Rentals and resale homes. |
| Class 4 impact-resistant shingles | $475–$1,050 per square | Architectural shingles rated UL 2218 Class 4 for hail. $75–$200 a square more than standard, and insurers in hail states credit the premium. |
| Standing-seam metal | $900–$1,700 per square | Hidden fasteners, 40–70 years, sheds snow and shrugs off hail. Two to three times the price of shingles. |
| Corrugated or exposed-fastener metal | $500–$1,200 per square | Budget metal for simple roofs, barns and porches; screws need checking every decade. 30–50 years. |
| Concrete tile | $700–$1,800 per square | Sun Belt standard (Arizona, Florida, California): 30–50+ years. Heavy — the framing must be rated for it. |
| Tile lift and relay (same tiles, new underlayment) | $400–$900 per square | The usual Phoenix or Las Vegas job: tiles outlast the felt under them, so the tiles come off, new underlayment goes down and the tiles go back, with 5–10% replaced for breakage. |
| Clay tile | $850–$2,400 per square | Spanish and Mediterranean homes; 50–100+ years. Tiles outlast the underlayment beneath them. |
| Natural slate | $1,000–$3,000 per square | Historic and high-end homes; 75–200 years. Needs a specialist crew and strong framing. |
| Cedar shake | $500–$1,500 per square | Looks, not value: 30–50 years, more upkeep, and banned or surcharged in many wildfire zones. |
| Synthetic or composite shingles | $700–$1,400 per square | Fake slate or shake in rubber or polymer; light, often Class 4 impact-rated, 30–50 years. |
| Flat roof (TPO or EPDM membrane) | $350–$1,000 per square | Row houses, additions and porches with little or no slope; 20–30 years. |
Three in four US roofs are asphalt, and architectural shingles at $400–$850 a square are the default on almost every re-roof: 25–30 years, wind-rated, Class A fire. Metal costs two to three times as much and lasts twice as long. Tile and slate are regional and heavy. The upgrade that pays almost everywhere is Class 4 impact resistance at $75–$200 a square more; see the insurance section below.
Common Roofing Jobs and What They Cost (2026)
Most 20-square shingle roofs cost $8,000–$17,000 and take one to three days with a crew of four to six. Tile, slate and metal take three to five. Time on site is in brackets.
| Block or rate | Low | Typical | High |
|---|---|---|---|
| Replace a 2,000 sq ft roof, architectural shingles, tear-off included (1–3 days) | $8,000 | $12,000 | $17,000 |
| Same roof in 3-tab shingles (1–2 days) | $6,000 | $8,000 | $10,500 |
| Same roof in Class 4 impact-resistant shingles (1–3 days) | $9,500 | $14,500 | $21,000 |
| Same roof in standing-seam metal (3–5 days) | $18,000 | $25,000 | $34,000 |
| Same roof in concrete tile (3–5 days) | $14,000 | $21,000 | $36,000 |
| Tile lift and relay, 2,000 sq ft: new underlayment, same tiles (3–7 days) | $8,000 | $12,000 | $18,000 |
| Replace a 1,500 sq ft roof, architectural shingles (1–2 days) | $6,000 | $9,000 | $12,750 |
| Replace a 3,000 sq ft roof, architectural shingles (2–4 days) | $12,000 | $18,000 | $25,500 |
| Steep or two-story 2,500 sq ft roof, architectural shingles (2–4 days) | $11,000 | $17,000 | $24,250 |
| 2,000 sq ft roof with ten sheets of rotted decking replaced (1–3 days) | $8,650 | $13,100 | $18,600 |
| 2,000 sq ft roof with 20 solar panels detached and reset (2–4 days) | $12,000 | $17,000 | $23,000 |
| Flat roof, 2,000 sq ft, TPO or EPDM membrane (2–4 days) | $7,000 | $14,000 | $20,000 |
| Minor roof leak repair (1–3 hrs) | $150 | $550 | $1,000 |
| Moderate repair, about 100 sq ft with new underlayment (half a day) | $1,000 | $1,800 | $3,000 |
| Replace chimney or wall flashing (2–4 hrs) | $300 | $700 | $1,500 |
| Roof inspection with written report (1 hr) | $100 | $240 | $400 |
What moves these prices: the roof's size in squares, pitch and complexity, the number of layers to tear off, rotted decking, the material, your city's labor rates, and the permit. Roofers bill $40–$90 an hour per worker; national guides put all roofs together at $4–$11 a square foot.
Architectural Shingles vs Metal vs Tile: What Each Costs and Why
A 20-square roof is $12,000 typical in architectural shingles, about $25,000 in standing-seam metal and $21,000 in concrete tile. Same deck, same underlayment rules, three very different roofs to own.
| Factor | Architectural asphalt | Standing-seam metal | Concrete tile |
|---|---|---|---|
| 2,000 sq ft roof, typical | $12,000 | $25,000 | $21,000 |
| Usual range | $8,000–$17,000 | $18,000–$34,000 | $14,000–$36,000 |
| Per square installed | $400–$850 | $900–$1,700 | $700–$1,800 |
| Life | 25–30 years | 40–70 years | 30–50+ years; underlayment 15–25 years, then a lift-and-relay at $400–$900 a square |
| Cost per year of roof | about $445 | about $500 | about $525 |
| Hail and wind | Class 4 versions available for +$75–$200 a square; 130–150 mph wind ratings | Class 4 by default on most profiles; dents are cosmetic | Resists hail; individual tiles crack and are replaced |
| Weight and structure | Light; any framing | Lightest; can go over one shingle layer | Heavy (9–12 lb per sq ft); framing must be rated for it |
| Watch out for | Roof-overs; felt instead of synthetic underlayment; no drip edge | Tariff-driven price moves; exposed-fastener panels sold as 'metal roof'; cosmetic-damage exclusions | Underlayment failing under good tiles; a change from shingles needs a permit and a framing check |
Price the roof you will own: shingles cost least now and about $445 a year over their life, metal costs two to three times as much and about $500 a year, and tile belongs where the housing stock and the framing are built for it.
Cost per Year, Repairs and the Life of a Roof
Spread over its life, an architectural shingle roof costs about $445 a year, a 3-tab roof $445, and a standing-seam metal roof $500. Repairs along the way run $150–$1,000 for a leak and $300–$1,500 for flashing.
| Item | Low | Typical | High |
|---|---|---|---|
| 2,000 sq ft architectural roof spread over 30 / 27 / 25 years | $265 | $445 | $680 |
| 2,000 sq ft 3-tab roof spread over 20 / 18 / 15 years | $300 | $445 | $700 |
| 2,000 sq ft standing-seam roof spread over 70 / 50 / 40 years | $255 | $500 | $850 |
| 2,000 sq ft concrete tile roof spread over 50 / 40 / 30 years | $280 | $525 | $1,200 |
| Roof inspection with written report (every 3–5 years, after storms) | $100 | $240 | $400 |
| Minor leak repair, typical call | $150 | $550 | $1,000 |
| Chimney or wall flashing replaced | $300 | $700 | $1,500 |
| Insurance-claim roof repair, 2025 average (Verisk) | $4,699 | $4,699 | $4,699 |
| Tear-off and disposal at the end, 20 squares | $2,000 | $3,500 | $6,000 |
Cost per year = the roof price at $8,000, $12,000 and $17,000 divided by a long, middle and short life: a well-installed, well-ventilated roof lasts toward the long end, a hot attic, a roof-over or a hail belt toward the short one. A new roof recoups 20–50% of its cost at sale in Angi's estimate and 67.5% in the 2025 Cost vs Value report.
What affects roof replacement costs
Size, in squares
A 1,500 sq ft roof is $6,000–$12,750, 2,000 sq ft $8,000–$17,000, 3,000 sq ft $12,000–$25,500. Roof area is bigger than the floor plan on a one-story home (about 2,469 sq ft on a 2,000 sq ft ranch) and smaller on a two-story (about 1,273 sq ft), so ask for measured squares.
Material
Per square installed: 3-tab $300–$525, architectural $400–$850, Class 4 +$75–$200, corrugated metal $500–$1,200, standing seam $900–$1,700, concrete tile $700–$1,800, clay $850–$2,400, slate $1,000–$3,000. Three in four US roofs are asphalt.
Pitch and complexity
A steep roof (9:12 and up) adds $1,000–$3,000 for harnesses, roof jacks and slower work; hips, valleys, dormers, skylights and chimneys add flashing and waste. A 2,500 sq ft steep two-story is $11,000–$24,250 against $10,000–$21,250 for a plain ranch roof of the same size.
Layers and decking
Tear-off of one layer ($100–$300 a square) is in the price; a second layer costs the same again, and code never allows a third. Rotted decking is $65–$160 a sheet and only shows after tear-off, so a good quote names the per-sheet price up front.
Your city
Labor is about half of a shingle roof, so prices follow local roofer pay: Los Angeles ($14,400 typical for 20 squares) sits at the top of our city pages and Tucson ($10,300) at the bottom. Permit fees ($100–$500, up to $1,400), dump fees and the hail belt move it too.
Season and storms
Late summer and fall are the busy months; winter and early spring quotes often run lower. A hail or wind storm books every crew in a metro for months, pulls in out-of-town roofers and lifts prices 10–20%, and insurance-claim replacements averaged $17,631 in 2025.
How to save on roof replacement
- Get the squares in writing.Two quotes $9,000 apart on the same house are usually counting the roof differently or leaving out tear-off. Make each roofer state the measured squares and the per-square rate.
- Architectural, not designer.Architectural shingles at $400–$850 a square last 25–30 years; designer lines add $500–$700 a square for looks. Spend the upgrade money on Class 4 ($75–$200 a square) in hail country instead — insurers credit it.
- Book the off-season.Late fall through early spring is slower for roofers almost everywhere, and quotes reflect it. Avoid the weeks after a big storm, when every crew is booked and prices rise 10–20%.
- Bundle the small jobs.New flashing ($300–$1,500), a skylight ($1,600–$4,200), a ridge vent ($300–$650) and solar detach-and-reset ($4,000–$6,000) all cost a second setup if done later. Put them on the re-roof.
- Use the insurance claim well.If wind or hail did it, the claim pays for replacement minus your deductible; get the roofer's report and the adjuster's together. Never let a roofer 'cover' the deductible, and ask about a Class 4 shingle while the insurer is paying.
- Repair a young roof, replace an old one.A leak repair is $150–$1,000 and reflashing $300–$1,500. Under 15 years old with damage in one place: repair. Over 20 with curling or granule loss in several places: a $12,000 replacement is the better buy against a patch a year.
Get two real quotes
Local roofers · free · max 2 will contact you · no spam.
Roof Replacement Cost by Roof Size
1,500 sq ft of roof (15 squares) in architectural shingles: $6,000–$12,750. 2,000 sq ft (20 squares): $8,000–$17,000. 2,500 sq ft (25 squares): $10,000–$21,250. 3,000 sq ft (30 squares): $12,000–$25,500. In standing-seam metal a 2,000 sq ft roof is $18,000–$34,000.
Worked example: a plain 2,000 sq ft gable roof is about $12,000. Add ten sheets of rotted decking at $110 each and the Class 4 upgrade at $125 a square and the job is roughly $15,600, about 30% more; make it a steep two-story and add another $2,000. That is why two quotes can look nothing alike until the scope is lined up.
Roof area is not floor area. A 2,000 sq ft one-story home with a 6:12 pitch and one-foot eaves carries about 2,469 sq ft of roof — nearly 25 squares, $10,000–$21,250 — while a 2,000 sq ft two-story carries about 1,273 sq ft, under 13 squares, $5,200–$11,050. Competitive bids on a standardized 20-square scope ran a median $13,250 (middle half $12,000–$14,650) over the past year, with 15 squares at $10,350 and 30 at $19,300.
What a roof replacement quote should include
A real roofing quote answers all of these. If it answers fewer than seven, ask before you pay a deposit.
- The roof area in squares, measured on the slopes, and the per-square rate
- Tear-off and disposal of the old roof, with the number of layers, and the dumpster
- Underlayment type (felt or synthetic) and where ice-and-water shield goes (eaves to 24 inches inside the wall, valleys, around penetrations)
- Shingle brand, product line and color, with the wind rating and whether it is UL 2218 Class 4
- Drip edge, starter strip, ridge cap, pipe boots, step and counter flashing, and ventilation as separate lines
- A per-sheet price for rotted decking, and who decides what gets replaced
- Who pulls the permit, what it costs, and that a dry-in inspection is included where the city requires one
- Proof of liability insurance and workers' comp, and the state license or registration number where your state has one
- Start and finish dates, how the roof is covered overnight, payment stages, and both warranties (manufacturer and workmanship)
Hail, insurance claims and Class 4 shingles: when the insurer pays for the roof — and pays you to upgrade it
About nine in ten catastrophe claims include roof damage, insurance-claim roof replacements averaged $17,631 in 2025 (+33% on the 2021–24 average) and severe hail hit a fifth or more of the roofs in 16 states. A Class 4 impact-resistant shingle adds $75–$200 a square — $1,500–$4,000 on a 20-square roof, $9,500–$21,000 all in — and in Texas the insurer must credit your premium for it.
| State or program | What the insurer does | How much |
|---|---|---|
| Texas (TDI) | Mandatory homeowners premium credit for a UL 2218 Class 4 roof, by rating territory | 4% (territory 9) to 34–35% (territories 3, 15–20); documented on TDI form PC068 |
| Texas (roofer surveys) | Class 4 upgrade cost and typical premium saving | +$75–$150 a square, about $1,000–$4,000 per roof; savings 15–28% on the premium |
| Illinois (roofer) | Class 4 upgrade cost over architectural shingles | +$1.70–$2.10 a square foot |
| Alabama (FORTIFIED) | Wind-premium discount for an IBHS FORTIFIED Roof / Silver / Gold designation | 25–35% / 35–45% / 45–55%; Strengthen Alabama Homes grants |
| Louisiana (FORTIFIED) | Insurer discounts, mandatory from January 2027; state grant program | 19–40% depending on insurer; grants of about $10,000 |
| Florida (statute 553.844) | The 25% rule: repairs over a quarter of the roof in a year on a roof permitted before 1 Mar 2009 | Full replacement to current code |
| Florida (Citizens) | Roof-age caps on insurability | Shingle 25 years; tile, slate or metal 50 years |
| US (Verisk 2025) | Average insurance-claim roof replacement and repair | $17,631 replacement (+33% vs 2021–24), $4,699 repair; severe hail hit 20%+ of roofs in 16 states |
Credits and rules from the Texas Department of Insurance, IBHS FORTIFIED, Florida statute and insurer filings (sources in our research notes). Discounts are set company by company; confirm yours before you buy the upgrade. Not insurance advice.
How a claim works: photograph the damage, call the insurer, and get the roofer's inspection report and the adjuster's together so both are counting the same squares. Your deductible — a flat sum or, in hail states, often 1–2% of the home's insured value — comes off the settlement. Your policy requires you to pay it, so a roofer who offers to 'cover' or 'waive' the deductible is taking it out of your roof: thinner underlayment, reused flashing, no ridge vent. Walk away.
Class 4 is the UL 2218 rating earned by dropping a 2-inch steel ball on the shingle without cracking it. In Texas, insurers must offer a homeowners premium credit for a documented Class 4 roof — from 4% to 35% of the premium depending on rating territory — and the roofer records the installation on TDI form PC068; Texas roofers quote the upgrade at $75–$150 a square (about $1,000–$4,000 a roof) and premium savings of 15–28%. Elsewhere the credit is voluntary but common across the hail belt from Colorado to Illinois. One catch: a policy that takes the credit may carry a cosmetic-damage exclusion, so dents that do not leak are not covered.
FORTIFIED is the Gulf Coast's version. The IBHS designation (Roof, Silver, Gold) adds a sealed roof deck, ring-shank nails and stronger edge details; Alabama insurers discount the wind premium 25–35% for FORTIFIED Roof and up to 55% for Gold, Louisiana insurers 19–40% with the discount mandatory from January 2027, and state grant programs in Alabama, Louisiana, North Carolina and Minnesota pay about $10,000 toward it. The designation has to be built in and inspected during the job — it cannot be added afterwards.
- Florida's 25% rule: repairs covering more than a quarter of the roof in a year on roofs permitted before March 1, 2009 trigger a full replacement to current code.
- Citizens (Florida's insurer of last resort) will not insure shingle roofs past 25 years or tile, slate and metal past 50.
- Verisk's 2025 average claim repair was $4,699 (+25%), well above our $150–$1,000 minor-leak price, because storm damage is rarely one spot.
- 38% of US homes have a roof in moderate-to-poor condition, which is why insurers now ask the roof's age before writing a policy.
If the claim pays for a new roof, the Class 4 upgrade is the best $1,500–$4,000 you will spend on it; in Texas it comes back as a premium credit within a few years.
Roofing permits and licenses: which cities make you pull a permit, which states license roofers, and what it costs
A re-roof permit costs $100–$500 in most cities (up to $1,400 in a few), and whether you need one for a like-for-like shingle roof depends on the city: Dallas requires it on any roofing work over $500, Fort Worth, Phoenix and Seattle do not for a straight replacement in the same material. Only a handful of states license roofers specifically (Arizona, California, Florida, Illinois, Nevada, Utah); Texas, Georgia, New York and Colorado have no state roofing license at all.
| City | Permit for a like-for-like re-roof? | Typical fee | Notes |
|---|---|---|---|
| Dallas, TX | Yes, any roofing work over $500 | About $110–$350 | Registered roofer or homestead owner pulls it; historic districts need a certificate of appropriateness |
| Fort Worth, TX | No, for shingle-for-shingle with no decking or structural work | $0 | A change of material or structural repair needs one |
| Houston, TX | Yes | $75–$600 | $100–$450 when the material changes |
| San Antonio, TX | Yes | $65–$510 | Roofer registers with the city first |
| Phoenix, AZ | No, for re-shingle or re-tile with the same material | $0 | A change to tile, or structural work, needs one: $150 for the first $1,000 of value plus $9 per $1,000 after |
| Tucson, AZ | Yes | $250–$1,000 | 2024 IRC |
| Mesa, AZ | Varies | $120–$650 | Like-for-like exemptions follow the Phoenix pattern |
| Seattle, WA | No, for most like-for-like single-family re-roofs | $0 | Insulation to R-49 can be required when attic cavities are exposed |
| Atlanta, GA | Yes | $385 flat | Online through the city's permit portal |
| Boise (Ada County), ID | Yes | $157 flat | |
| Miami-Dade County, FL | Yes, every re-roof | About $200–$350 plus surcharges | Products need a Notice of Acceptance; Broward about $150–$300, Palm Beach $180–$320 |
| Tampa, FL | Yes, every re-roof | From $177 | |
| Illinois suburbs (typical municipality) | Yes | $50–$300 | |
| Southlake, TX | Yes | $50, issued instantly |
From each city's or county's published guidance and permit pages, read November 2026 (numbered sources in our research notes). Fees change with each budget — confirm with the building department. Not legal advice.
What the permit buys you is the inspection: a dry-in check of the underlayment and flashing before the shingles go on, and a final. Where no permit is required (Phoenix, Fort Worth, Seattle for most single-family roofs), nobody but you checks the work, so the written scope matters more. A change of material — shingles to tile, or a structural repair — needs a permit everywhere, and Phoenix charges $150 for the first $1,000 of value plus $9 per $1,000 after. The roofer should pull the permit; a roofer who asks you to pull it as the homeowner is usually not registered with the city.
Licensing is a patchwork. Arizona's CR-42, California's C-39, Florida's CCC, Illinois' IDFPR roofing license, Nevada's C-15 and Utah's S280 are true roofing licenses with exams and bonds; Massachusetts needs a Construction Supervisor License plus Home Improvement registration; Minnesota licenses roofers above $15,000 a year; Washington, Oregon and New Jersey register every contractor; North Carolina licenses only from $30,000 a project. Texas, Georgia, Colorado, New York, Ohio, Indiana, Kentucky and Missouri have no state roofing license, so the city registration and proof of insurance are the only checks. California's small-job exemption rose from $500 to $1,000 on January 1, 2025 — but it never applies to permitted work, so every re-roof there needs a C-39.
- Texas — No state roofing license; RCAT certification is voluntary. City registration, proof of insurance, TDI form PC068 for a Class 4 roof
- Arizona — Registrar of Contractors, class CR-42 Roofing (exam, 4 years' experience, bond). Look up the ROC number
- California — CSLB class C-39 Roofing; $1,000 small-job limit never applies to permitted work; $25,000 bond. Check the license on the CSLB site
- Florida — DBPR certified (CCC) or registered roofing contractor, no price threshold. Check the DBPR license; HVHZ products need a Notice of Acceptance
- Illinois — IDFPR roofing license (limited residential or unlimited) plus a Chicago city license in the city. Ask for both numbers
- Nevada — State Contractors Board class C-15 Roofing and Siding. Check the NSCB number
- Georgia — No state roofing license (exempt specialty). Insurance, references and the county permit
- New York — No statewide license; New York City and four downstate counties license home improvement contractors. DOB permit and HIC license in the city
- North Carolina — State license only from $30,000 a project. Insurance and the county permit for most roofs
- Minnesota — Residential roofer license above $15,000 a year in roofing revenue. Check the DLI license
- Washington — Labor & Industries contractor registration, bond and insurance on file. Look up the L&I registration
- Massachusetts — Home Improvement Contractor registration plus a Construction Supervisor License (Roof Covering specialty). Ask for both numbers
- Utah — DOPL class S280 Roofing. Check the DOPL license
- Colorado — No state license; cities license roofers (Denver: contractor license plus supervisor certificate). City license and permit
- Look up the licenseEvery licensing state has an online lookup (CSLB, ROC, DBPR, IDFPR, NSCB, DOPL, L&I). Check the number, the classification and that the bond and insurance are current.
- Ask who pulls the permitThe roofer should, and the fee ($100–$500 in most cities) should be a line in the quote. Ask whether a dry-in inspection is included.
- Get the certificate of insuranceLiability and workers' comp, issued to you by the insurer, not a photocopy. Roofing has one of the highest injury rates of any trade, and an uninsured worker's fall becomes your claim.
- Check the code basics in the quoteTear-off to the deck where two layers exist (the model code never allows a third), ice-and-water shield from the eave to 24 inches inside the wall line where your climate requires it, and drip edge at eaves and rakes.
Licensing and permit lines in each city guide give the local rule; this page's figures are the national pattern. Dollar thresholds count labor and materials together. Not legal advice.
What moved roofing prices in 2025–26: tariffs on metal, a wage jump, and shingles that barely budged
Our national price moved about 5.5% over the past year: roofers' median pay rose 8.8% in federal data (May 2024 to May 2025) while roofing materials rose 1.48% in Verisk's index. The exception is metal: the Section 232 tariff on imported steel and aluminum went to 50% on June 4, 2025, copper on August 1, 2025, and metal roofing costs rose by as much as 60% that spring.
| Item | 2025–26 move | Source |
|---|---|---|
| Steel and aluminum (Section 232 tariff) | 25% from March 2025, 50% from 4 June 2025; 25% on derivative products such as fasteners | Roofing Contractor; Construction Dive |
| Copper (Section 232 tariff) | 50% from 1 August 2025; copper roofing now $15–$30 a square foot installed | Roofing Contractor |
| Metal roofing panels | Costs rose by as much as 60% between March and early June 2025; panel prices +5–10% on late-2025 coil | Building Enclosure / Roofing Contractor analysis |
| Roofing materials overall (Verisk) | +1.48% in 2025 against labor +0.79%; US reconstruction costs +3.4% March 2025–March 2026 | Verisk 2026 US Roof Report; Verisk Q1 2026 Property Report |
| GAF Timberline HDZ architectural shingle | $37.97–$41.47 a bundle at Home Depot (about $114–$125 a square); cool-roof Reflector Series $53.99 a bundle | Home Depot shelf price, Nov 2026 |
| 3-tab shingle (GAF Royal Sovereign) | $35.97 a bundle, about $108 a square | Home Depot shelf price, Nov 2026 |
| Synthetic underlayment | $107–$349 per 1,000 sq ft roll ($11–$35 a square); ice-and-water shield $73.67–$292.83 a roll | Home Depot shelf prices, Nov 2026 |
| 7/16 in OSB sheathing | $14–$20 a sheet, national average $16.50 (July 2026); 1/2 in CDX plywood $28–$52 | Panel price roundup, Jul 2026 |
| Roofer wages (BLS OEWS) | US median $50,970 (May 2024) to $55,440 (May 2025), +8.8% | BLS OEWS via wagedex |
Retail prices from Home Depot shelf listings read November 2026; tariff dates from Roofing Contractor and Construction Dive; indices from Verisk and BLS. Numbers in brackets are our research-note sources.
Shingles are the stable part. A bundle of GAF Timberline HDZ, the most common architectural shingle in the country, sells for $38–$42 at the big-box store — about $114–$126 a square — and the 3-tab Royal Sovereign for $36, so the shingles on a 20-square roof are roughly $2,640 of a $12,000 job. Synthetic underlayment is $107–$349 per 1,000 sq ft roll, ice-and-water shield $74–$293 a roll, and 7/16-inch OSB for decking repairs $14–$20 a sheet. The cool-roof version of the same shingle (Timberline HDZ Reflector, required under California's Title 24 in much of the state) is $54 a bundle — about $42 a square more.
Labor is where the money moved. Roofers' median annual pay went from $50,970 to $55,440 between the May 2024 and May 2025 federal wage surveys, an 8.8% jump, and labor is 40–60% of a shingle roof. Completed-job data from roofing businesses shows the same direction with a bigger mix effect — ServiceTitan's median completed re-roof went from $18,050 in May 2025 to $24,354 in April 2026 — and US reconstruction costs overall rose 3.4% from March 2025 to March 2026.
Metal is the outlier. Standing seam now runs $900–$1,700 a square ($18,000–$34,000 for 2,000 sq ft) and copper $1,300–$3,000; the tariffs also reached fasteners, drip edge and flashing, which is a few dollars a square on an asphalt roof. If a 2025 quote has expired, expect the shingle lines to be close and the metal and trim lines to be higher; if you are choosing between shingles and metal, the gap is wider than it was in 2024.
Our city pages carry the November 2026 price level; each is re-checked against the national guides, the retailer shelf prices and the federal wage data on every rebuild.
Two bids for the same roof: what the cheap quote leaves out, and how to make the bids comparable
Hidden costs add 15–20% to the average roof replacement, and competitive bids on an identical 20-square asphalt scope still spread $12,000–$14,650 (median $13,250). A cheap quote usually gets there by leaving something out of the written scope — tear-off, synthetic underlayment, ice-and-water shield, a decking allowance, the permit, the ridge vent, the warranty — not by paying the crew less.
| Line the cheap quote drops | What it costs when it is in | What happens when it is out |
|---|---|---|
| Tear-off of the old roof, one layer | $100–$300 a square ($2,000–$6,000 on 20 squares) | A roof-over: shingles on old shingles, decking never inspected, shorter life; never allowed over two layers |
| Synthetic underlayment and ice-and-water shield | $40–$125 a square more than felt ($800–$2,500 on 20 squares) | Felt only; no ice barrier at eaves and valleys where the code requires one |
| Rotted decking, priced per sheet in advance | $65–$160 per 4 × 8 sheet; $650–$1,600 for ten | A change order mid-job at whatever price the roofer names |
| Drip edge at eaves and rakes | $1.50–$3.00 a linear foot | Water wicks behind the fascia; most codes now require it |
| Ridge vent and pipe boots | Ridge vent $300–$650; a box vent $200–$700 | Old vents reused; attic ventilation never fixed |
| Step and counter flashing at walls and chimney | $300–$1,500 | Old flashing reused or caulked over — the most common leak a year later |
| Disposal and the dumpster | $497–$583 for a 2,000 sq ft roof | Billed separately at the end |
| Permit and inspection | $100–$500 in most cities | No dry-in inspection; the homeowner is asked to pull it |
| Workmanship warranty | Extended warranty $500–$2,000; a basic one should be free | One-year or none; the manufacturer's warranty does not cover installation |
Prices are the national figures from our tables. The sample competitive-bid scope — a 2,382 sq ft, 6:12 roof with two valleys — drew bids of $16,287–$16,721 with decking by change order at a stated per-sheet price; that is what a complete quote looks like.
Start with the squares. Two roofers who measure the same roof at 20 and 25 squares are $2,000–$4,250 apart before anything else, so make both state the measured squares and the per-square rate. Then line up the scope above item by item: a bid that is $4,000 under the other on a $12,000 roof has almost always dropped the tear-off, the synthetic underlayment or the decking allowance, or is a roof-over. The contractor's share is the smallest lever — labor runs $40–$90 an hour per worker and a crew of four to six is on your roof for one to three days.
Then compare the product. 'Architectural shingles' covers a $38–$42 bundle of Timberline HDZ and a designer line at twice the price; ask for the brand, line, color and wind rating, and whether it is Class 4. Underlayment should be named (synthetic, and which one), and the ice-and-water shield located (eaves to 24 inches inside the wall line, valleys, around penetrations). Finally the paper: who pulls the permit, the certificate of insurance, the manufacturer's warranty registration, and a workmanship warranty of at least two years in writing.
- A deposit of more than a third before materials are delivered
- A price that is good 'today only', or a roofer who turned up after the storm from out of state
- An offer to 'cover' your insurance deductible
- No permit, or a request that you pull it as the homeowner
- No per-sheet decking price, no named underlayment, no shingle line named
- A quote in square feet of house rather than measured squares of roof
Use our quote checker on this page to see where a bid sits against the going rate in your city, line by line.
Roof replacement cost: FAQ
How much does it cost to replace a roof?
$8,000–$17,000 for a 2,000 sq ft roof in architectural asphalt shingles with the old roof torn off, with $12,000 typical in 2026. That is $400–$850 a square. 3-tab is $6,000–$10,500, standing-seam metal $18,000–$34,000 and concrete tile $14,000–$36,000.
How much does a roof cost per square?
$400–$850 per square (100 sq ft) for architectural shingles installed with tear-off — $4.00–$8.50 a square foot — $300–$525 for 3-tab, $900–$1,700 for standing-seam metal, $700–$1,800 for concrete tile and $1,000–$3,000 for slate. National guides put all roofs together at $4–$11 a square foot.
How much does a new roof cost on a 2,000 sq ft house?
It depends on the roof, not the house: a one-story 2,000 sq ft home carries about 2,469 sq ft of roof ($10,000–$21,250 in architectural shingles) and a two-story about 1,273 sq ft ($5,200–$11,050). A 2,000 sq ft roof is $8,000–$17,000.
How much does a metal roof cost?
$18,000–$34,000 for 2,000 sq ft of standing-seam metal ($900–$1,700 a square), or $10,000–$24,000 in corrugated exposed-fastener panels. Metal lasts 40–70 years; tariffs lifted metal roofing costs sharply in 2025.
Does insurance pay for a new roof?
For sudden wind or hail damage, usually yes, minus your deductible (often 1–2% of the insured value in hail states); for age and wear, no. Insurance-claim replacements averaged $17,631 in 2025. In Texas the insurer must then credit your premium 4–35% for a Class 4 impact-resistant roof.
Do I need a permit to replace my roof?
In most cities yes, at $100–$500 (up to $1,400 in a few), and the roofer should pull it. Some cities exempt a like-for-like re-roof in the same material — Phoenix, Fort Worth and Seattle for most single-family homes — while Dallas requires one on any roofing work over $500 and Florida on every roof.
Can a new roof go over the old shingles?
Over one layer, code allows it, and it saves the tear-off ($100–$300 a square). Over two layers, never. Most roofers advise against a roof-over because the decking is never inspected and the new shingles run hotter and shorter; a roof-over also voids some shingle warranties.
How much does roof repair cost?
$150–$1,000 for a minor leak, $1,000–$3,000 for a 100 sq ft section with new underlayment, $300–$1,500 to replace chimney or wall flashing, and $100–$400 for an inspection with a written report. Most roofers charge a minimum call-out of $150–$300.
How long does a roof replacement take?
One to three days for a 20-square shingle roof with a crew of four to six, weather permitting; three to five days for tile, slate, standing seam or a steep, cut-up roof. The roof is covered with underlayment or tarps overnight.
Are roof prices going up in 2026?
By about 5.5% in our model over the past year: roofers' median pay rose 8.8% in federal data (May 2024 to May 2025) while roofing materials rose 1.48%. Metal is the exception — the Section 232 tariff on steel and aluminum went to 50% in June 2025 and metal roofing costs rose as much as 60% that spring.
Done your research?
Pick your city for local prices, or get two real roof replacement quotes now. Free, no spam.