How much does a new roof cost in Canton?
By Our research team · Last verified · Methodology
Most roofers in Canton charge $7,700–$16,000 to replace a 2,000 sq ft roof architectural shingles, tear-off included. $11,300 is the going rate; 3-tab shingles save about $3,800, and a metal roof costs $17,500–$32,000.
How we get this data- Typical
- $11,300
- Low end
- $5,400
- High end
- $22,450
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local roofers send you a real quote. Free, no obligation.
Get my fair quote →The typical Canton price is $11,300, 6% below the US typical of $12,000.
Canton's price band
Canton is cheaper than 57% of the 195 US metros we price for roof replacement work.
A roofer in Canton charges $7,700–$16,000 to tear off and replace 20 squares of architectural shingles, and most homeowners pay about $11,300. 3-tab shingles bring the same roof down to $5,800–$9,900; standing-seam metal takes it to $17,500–$32,000. A minor leak repair is $145–$920 and an inspection $95–$365.
Canton is a smaller market. A 20-square re-roof here is about 6% below the US typical of $12,000, and most of the gap is labor: a bundle of shingles costs about the same at every supply house in the country, and labor is roughly half of a roofing bill.
Ohio has no state roofing license; roofers register with the Secretary of State and cities license contractors themselves, so ask for proof of insurance and the permit. This is general information, not legal advice.
Comparing cities, or after the US-wide picture? See the national guide: Roof replacement cost in the USA.
$7,700–$16,000 to replace a 2,000 sq ft roof in Canton — architectural asphalt shingles, old roof torn off, 20 squares — typically $11,300. That is $385–$800 a square; a 2,500 sq ft steep or two-story roof is $10,600–$22,800, standing-seam metal $17,500–$32,000, and a leak repair $145–$920. Verified November 2026. Get free Canton quotes →
- 2,000 sq ft roof, architectural shingles, tear-off included: $7,700–$16,000 ($11,300 typical)
- Per square: 3-tab $290–$495; architectural $385–$800; standing seam $875–$1,600
- By size: $5,800–$12,000 for 1,500 sq ft; $11,550–$24,000 for 3,000 sq ft; steep two-story 2,500 sq ft $10,600–$22,800
- Repairs: leak $145–$920; flashing $285–$1,400; inspection $95–$365
- Extras: decking $65–$150 a sheet; Class 4 shingles +$75–$195 a square; skylight $1,550–$4,000
Prices verified November 2026 · Cross-referenced against 221+ American pricing sources · See methodology
Installed prices with labor, materials, tear-off of one layer and cleanup unless the row says otherwise. Canton metro, re-verified November 2026. Decking, flashing, solar and repairs are their own rows.
| Service | Low | Typical | High |
|---|---|---|---|
| Replace roof, 2,000 sq ft (20 squares), architectural asphalt shingles, tear-off includedinstalled | $7,700installed | $11,300 | $16,000 |
| Replace roof, 1,500 sq ft (15 squares), architectural shingles, tear-off includedinstalled | $5,800installed | $8,500 | $12,000 |
| Replace roof, 2,500 sq ft (25 squares), architectural shingles, tear-off includedinstalled | $9,650installed | $14,150 | $20,000 |
| Replace roof, 3,000 sq ft (30 squares), architectural shingles, tear-off includedinstalled | $11,550installed | $16,950 | $24,000 |
| Replace roof, 2,500 sq ft steep or two-story roof (25 squares plus the steep-pitch add)installed | $10,600installed | $16,000 | $22,800 |
| 3-tab asphalt shingles, per square (100 sq ft), installed with tear-offper square | $290per square | $375 | $495 |
| Architectural asphalt shingles, per square, installed with tear-offper square | $385per square | $565 | $800 |
| Class 4 impact-resistant shingle upgrade, per square (add to the architectural price)per square | $75per square | $120 | $195 |
| Standing-seam metal roof, per square, installedper square | $875per square | $1,200 | $1,600 |
| Concrete tile roof, new tile, per square, installedper square | $680per square | $995 | $1,700 |
| Clay tile roof, new tile, per square, installedper square | $825per square | $1,350 | $2,300 |
| Natural slate roof, per square, installedper square | $970per square | $1,700 | $2,850 |
| Tile roof lift and relay: new underlayment, same tiles reused, per squareper square | $385per square | $560 | $840 |
| Flat or low-slope roof, TPO or EPDM membrane, per square, installedper square | $340per square | $665 | $950 |
| Tear-off and disposal of the old shingles, one layer, per squareper square | $95per square | $165 | $280 |
| Replace rotted roof decking, per 4 × 8 ft sheet, installedper sheet | $65per sheet | $105 | $150 |
| Synthetic underlayment and ice-and-water shield upgrade over felt, per squareper square | $39per square | $75 | $120 |
| Replace chimney, wall or valley flashingper job | $285per job | $650 | $1,400 |
| Ridge vent, about 40 ft, installedper job | $285per job | $420 | $605 |
| Install a new fixed skylight, standard size, flashed into the roofinstalled | $1,550installed | $2,750 | $4,000 |
| Detach and reset 20 solar panels for a re-roofper job | $3,800per job | $4,600 | $5,500 |
| Roof inspection with written reportper visit | $95per visit | $220 | $365 |
| Roof leak repair, minor (one leak, a few shingles)per job | $145per job | $505 | $920 |
| Roof repair, moderate (shingles and underlayment over about 100 sq ft)per job | $955per job | $1,650 | $2,800 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local roofers in Canton
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What kind of roofing job is it?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the roofers who reply.
Where should they text you?
- Max 2 roofers. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched roofers see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 roofers about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Prices verified November 2026 · Cross-referenced against 221+ American pricing sources · See methodology
Figures are for the Canton metro area. Trip and delivery charges can apply on the far edges; tight access and old layers in Downtown Canton & the Arts District cost the most to re-roof.
Roof replacement prices across Canton
Where you live changes the labor and the access, not the shingles. Older roofs in Downtown Canton & the Arts District take the longest; roofs in North Canton & Jackson Township price near the city typical, but are bigger.
Downtown Canton & the Arts District
- 2,000 sq ft shingle roof
- $8,150–$17,900 installed
- Minor leak repair
- $155–$1,050 / minor leak repair
Tight lots, street parking for the dumpster and older roofs with two layers. Dumpster permits, staging and hand-carrying bundles add labor, and flat or low-slope sections are common.
Southeast & Northeast Canton
- 2,000 sq ft shingle roof
- $7,850–$16,950 installed
- Minor leak repair
- $150–$975 / minor leak repair
Lots of fix-and-flip work and full re-roofs on older homes. Ask whether the price covers a second layer of shingles if the house has one.
North Canton & Jackson Township
- 2,000 sq ft shingle roof
- $7,700–$16,650 installed
- Minor leak repair
- $145–$955 / minor leak repair
Mostly single-family homes with bigger, more cut-up roofs: hips, valleys and dormers add squares and labor. Two-story homes cost more for access.
Massillon & Alliance
- 2,000 sq ft shingle roof
- $7,250–$15,700 installed
- Minor leak repair
- $135–$900 / minor leak repair
Lower rates, more travel. Ask whether the quote includes delivery and the dumpster haul, which cost more farther from the landfill.
Real-World Roof Replacement Costs in Canton
Here's what common roof replacement jobs cost in Canton in 2026, tear-off of one layer, disposal, underlayment, flashing, ridge vent and cleanup included.
Re-roof a 2,000 sq ft home, architectural shingles — 1 to 3 days
Tear off one layer, inspect the decking, lay synthetic underlayment with ice-and-water shield at the eaves and valleys, new drip edge, pipe boots, flashing and ridge vent, then 20 squares of architectural shingles. Most Canton roofs land here; a second layer or steep pitch pushes the bill toward $16,000.
Same roof with ten sheets of rotted decking replaced
Decking rot shows up only after tear-off. Ten 4 × 8 sheets at $105 each adds about $1,050 to a $11,300 roof, which is why a good quote states a per-sheet price before the job starts rather than a surprise after.
Steep, cut-up two-story roof, 2,500 sq ft — 2 to 4 days
Hips, valleys, dormers and a 9:12 pitch mean harnesses, roof jacks, slower work and more waste. Canton roofers price a 2,500 sq ft steep two-story at $10,600–$22,800; a plain 2,500 sq ft ranch roof would be closer to $9,650–$20,000, so the pitch adds about $930–$2,800.
Same 20 squares in Class 4 impact-resistant shingles
The upgrade is $75–$195 a square, about $2,400 on a 20-square roof. In hail states the insurer credits the premium — Texas requires it — so the upgrade can pay for itself in a few years; see the insurance section on the national page.
Fix one leak and reflash the chimney — a few hours
A single leak repair is $145–$920 and new chimney or wall flashing $285–$1,400, so the pair comes to about $1,155. If the roof is under 15 years old and the damage is local, this is the better buy against a $11,300 replacement; if a storm did it, see the insurance section on the national page.
How much does a new roof cost in Canton?
Between $7,700 and $16,000 for a 2,000 sq ft roof in architectural shingles, old roof torn off, and $11,300 is the price most Canton homeowners pay. The shingles themselves are about 60 bundles at $38–$42 each; the rest is a crew of four to six for one to three days, the dumpster, underlayment, flashing, vents and the permit.
Size is the biggest lever after material: a 1,500 sq ft roof is $5,800–$12,000, 2,500 sq ft $9,650–$20,000, and 3,000 sq ft $11,550–$24,000. Prices re-checked against 221 sources in November 2026.
Roof replacement prices in Canton (2026): by material and size
A 20-square architectural-shingle roof costs $7,700–$16,000, 3-tab $5,800–$9,900, and standing-seam metal $17,500–$32,000.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| 2,000 sq ft roof, architectural shingles, tear-off included | $7,700 | $11,300 | $16,000 |
| Same roof, 3-tab shingles | $5,800 | $7,500 | $9,900 |
| Same roof, Class 4 impact-resistant shingles | $9,200 | $13,700 | $19,900 |
| Same roof, standing-seam metal | $17,500 | $24,000 | $32,000 |
| Same roof, concrete tile | $13,600 | $19,900 | $34,000 |
| 1,500 sq ft roof, architectural shingles | $5,800 | $8,500 | $12,000 |
| 2,500 sq ft steep or two-story roof, architectural shingles | $10,600 | $16,000 | $22,800 |
| Roof leak repair, minor | $145 | $505 | $920 |
Per square is the number to compare in Canton: $385–$800 for architectural shingles with tear-off. Multiply by your roof's squares (roof area, not floor area — a 2,000 sq ft one-story home carries about 22–25 squares with overhangs and pitch) and the quote should land near $11,300 for a plain 20-square roof.
What moves a roofing quote in Canton:
- Roof size and pitch — 15 squares is $5,800–$12,000, 20 squares $7,700–$16,000, 30 squares $11,550–$24,000; a steep 9:12-plus pitch adds $930–$2,800.
- Material — 3-tab $290–$495, architectural $385–$800, Class 4 upgrade +$75–$195, standing-seam metal $875–$1,600, concrete tile $680–$1,700, slate $970–$2,850, all per square installed.
- What is under the old shingles — a second layer costs another $95–$280 a square to tear off, and rotted decking is $65–$150 a sheet.
- Underlayment and details — synthetic underlayment with ice-and-water shield is $39–$120 a square more than felt; a ridge vent $285–$605; new chimney flashing $285–$1,400.
- Permit, solar and warranty — permits run $100–$500 in most cities, detaching and resetting 20 solar panels $3,800–$5,500, and an extended workmanship warranty $500–$2,000.
Ask every Canton roofer the same five things: how many squares they measured, whether tear-off and disposal are in the price, which underlayment and where the ice-and-water shield goes, the per-sheet decking price, and who pulls the permit. Compare those, not the headline price. Get a quote for your roofing job →
Roof Replacement Cost in Canton by Roof Size
1,500 sq ft roof (15 squares): $5,800–$12,000. 2,000 sq ft (20 squares): $7,700–$16,000. 2,500 sq ft (25 squares): $9,650–$20,000. 3,000 sq ft (30 squares): $11,550–$24,000, all in architectural shingles with tear-off.
Worked example: a Canton 2,000 sq ft roof with a plain gable is about $11,300. Add ten sheets of rotted decking at $105 each and a Class 4 shingle upgrade at $120 a square and the job is roughly $14,750, about 31% more, which is why two quotes can look nothing alike until you line up what each one includes.
Roof area is not floor area. A 2,000 sq ft one-story home with overhangs and a 6:12 pitch carries about 2,469 sq ft of roof (nearly 25 squares), while a 2,000 sq ft two-story carries about 1,273 sq ft (under 13 squares), so the same house size can be quoted as 13 squares ($5,000–$10,400) or 25 squares ($9,650–$20,000). Ask for the measured squares, not the house size.
Canton Roof Replacement Costs by Material
| Material | Cost | Best for |
|---|---|---|
| Architectural asphalt shingles | $385–$800 per square | The standard US roof (about three in four homes): 25–30 years, Class A fire rating, wide color choice. A 20-square roof runs $7,700–$16,000. |
| 3-tab asphalt shingles | $290–$495 per square | The cheapest roof that meets code; flat look, 15–20 years. Rentals and resale homes. |
| Class 4 impact-resistant shingles | $460–$995 per square | Architectural shingles rated UL 2218 Class 4 for hail. $75–$195 a square more than standard, and insurers in hail states credit the premium. |
| Standing-seam metal | $875–$1,600 per square | Hidden fasteners, 40–70 years, sheds snow and shrugs off hail. Two to three times the price of shingles. |
| Corrugated or exposed-fastener metal | $485–$1,150 per square | Budget metal for simple roofs, barns and porches; screws need checking every decade. 30–50 years. |
| Concrete tile | $680–$1,700 per square | Sun Belt standard (Arizona, Florida, California): 30–50+ years. Heavy — the framing must be rated for it. |
| Tile lift and relay (same tiles, new underlayment) | $385–$840 per square | The usual Phoenix or Las Vegas job: tiles outlast the felt under them, so the tiles come off, new underlayment goes down and the tiles go back, with 5–10% replaced for breakage. |
| Clay tile | $825–$2,300 per square | Spanish and Mediterranean homes; 50–100+ years. Tiles outlast the underlayment beneath them. |
| Natural slate | $970–$2,850 per square | Historic and high-end homes; 75–200 years. Needs a specialist crew and strong framing. |
| Cedar shake | $450–$1,350 per square | Looks, not value: 30–50 years, more upkeep, and banned or surcharged in many wildfire zones. |
| Synthetic or composite shingles | $630–$1,250 per square | Fake slate or shake in rubber or polymer; light, often Class 4 impact-rated, 30–50 years. |
| Flat roof (TPO or EPDM membrane) | $340–$950 per square | Row houses, additions and porches with little or no slope; 20–30 years. |
Material price vs. what you pay — the Canton roofing bill
A bundle of architectural shingles costs $38–$42 and three bundles cover one square, so a 20-square roof needs about 60 bundles plus 10–15% waste: $2,508–$2,772 of shingles inside a $7,700–$16,000 job in Canton. Synthetic underlayment is $107–$349 a 1,000 sq ft roll, ice-and-water shield $74–$293 a roll, and starter strip, ridge cap, drip edge, nails and vents add a few hundred more. The difference pays for a crew's time, the tear-off, the dumpster, the permit, insurance and the warranty.
Labor and overhead are 40% to 60% of a roofing bill, which is why prices differ by city while the shingle price barely moves. Where roofers earn more and dump fees and permits cost more, a roof costs more; the bundle on the pallet costs about the same in Canton as anywhere else.
What's included in a Canton roofing quote (and what costs extra)
A standard re-roof price covers tear-off of one layer, disposal, synthetic or felt underlayment, ice-and-water shield where code requires it, drip edge, pipe boots, step and valley flashing, a ridge vent, the shingles, cleanup with a magnet sweep, and the permit. The headline price often leaves out:
- Rotted decking — $65–$150 per 4 × 8 sheet, found after tear-off
- A second shingle layer — another $95–$280 a square to tear off
- Chimney or wall flashing rebuilt — $285–$1,400
- Solar panels and skylights — detaching and resetting 20 panels $3,800–$5,500; a new skylight $1,550–$4,000
Ask for the shingle product and color, the underlayment type, the warranty (manufacturer and workmanship) and proof of liability and workers' comp insurance in writing.
Roof size, in squares
Roofers price by the square (100 sq ft of roof surface), $385–$800 for architectural shingles in Canton. A 1,500 sq ft roof is $5,800–$12,000, 2,000 sq ft $7,700–$16,000, 3,000 sq ft $11,550–$24,000. Overhangs and pitch make the roof bigger than the floor plan: a one-story 2,000 sq ft home carries about 2,469 sq ft of roof, a two-story about 1,273.
Pitch and complexity
A steep roof (9:12 and up) adds $930–$2,800 for harnesses, roof jacks and slower work. Hips, valleys, dormers and skylights add cutting, flashing and waste, which is why a 2,500 sq ft steep two-story is $10,600–$22,800 against $9,650–$20,000 for a plain ranch roof of the same size.
Layers and decking
Tearing off one layer is $95–$280 a square and a second layer costs the same again. Rotted decking is $65–$150 per 4 × 8 sheet; a good quote names that price up front. Code allows two layers at most and never a third, so a roof with two layers is always a full tear-off.
Material
Per square installed: 3-tab $290–$495, architectural $385–$800, Class 4 impact-resistant +$75–$195, corrugated metal $485–$1,150, standing seam $875–$1,600, concrete tile $680–$1,700, clay tile $825–$2,300, slate $970–$2,850. Tile and slate also need framing rated for the weight.
Local rules and licensing
Ohio has no state roofing license; roofers register with the Secretary of State and cities license contractors themselves, so ask for proof of insurance and the permit.
Labor rates in Canton
Roofers in the Canton-Massillon metro earn a median $48,550 a year in federal wage data, about 12% below the US median. Labor is about half the bill, so Canton prices land about 6% below the US typical of $12,000 for a 20-square roof.
Season and storms
Late summer and fall are the busy months, and a hail or wind storm can book every Canton crew for months and pull in out-of-town contractors. Winter and early spring quotes are often lower; shingles still seal once the sun warms them, though below about 40°F crews hand-seal and work shorter days.
- Get the squares in writing.Have each Canton roofer state the squares they measured. Two quotes $8,300 apart on the same house are usually counting the roof differently or leaving out tear-off.
- Pick architectural, not designer, shingles.Architectural shingles at $385–$800 a square last 25–30 years. Designer and luxury lines add $450–$630 a square for looks, not life; a Class 4 upgrade at $75–$195 buys something real in hail country.
- Replace flashing and skylights on the same job.New chimney flashing is $285–$1,400 and a skylight $1,550–$4,000 while the crew is already on the roof; done later they cost a second setup.
- Book the off-season.Late fall through early spring is slower for Canton roofers, and quotes reflect it. Avoid the weeks after a big storm, when every crew is booked and prices rise 10–20%.
- Check your insurance before you pay.If wind or hail did the damage, a claim may cover replacement minus your deductible (often 1–2% of the home's insured value). Get the roofer's report and your adjuster's together, and do not sign with a roofer who offers to 'cover' your deductible — your policy makes you pay it, and the shortfall comes out of the roof.
- Fix, don't replace, a young roof.A leak repair is $145–$920 and reflashing $285–$1,400. If the roof is under 15 years old and the damage is in one place, a repair is the better buy against a $11,300 replacement.
Canton roofers quote by the square or by the job. Before you pay a deposit, get these in writing:
- The roof area in squares, measured on the slopes, and the per-square rate
- Tear-off and disposal of the old roof, with the number of layers, and the dumpster
- Underlayment type (felt or synthetic) and where ice-and-water shield goes (eaves, valleys, around penetrations)
- Shingle brand, product line and color, with the wind and impact rating
- Drip edge, starter strip, ridge cap, pipe boots, step and counter flashing, and ventilation as separate lines
- A per-sheet price for rotted decking, and who decides what gets replaced
- Who pulls the permit, and proof of liability insurance, workers' comp and the state license or registration where required
- Start and finish dates, how the roof is covered overnight, payment stages, and both warranties (manufacturer and workmanship)
How much does a new roof cost in Canton?
$7,700–$16,000 for a 2,000 sq ft roof in architectural asphalt shingles with the old roof torn off, and $11,300 is typical. That is $385–$800 a square.
How much does roof replacement cost per square in Canton?
$385–$800 per square for architectural shingles installed with tear-off, $290–$495 for 3-tab, $875–$1,600 for standing-seam metal and $680–$1,700 for concrete tile. A square is 100 sq ft of roof surface, so that is $3.85–$8.00 a square foot for architectural.
How much does a metal roof cost in Canton?
$17,500–$32,000 for 2,000 sq ft of standing-seam metal, or $9,700–$23,000 in corrugated exposed-fastener panels. Metal lasts 40–70 years, roughly twice as long as shingles.
How much does roof repair cost in Canton?
$145–$920 for a minor leak, $955–$2,800 for a 100 sq ft section with new underlayment, and $285–$1,400 to replace chimney or wall flashing. Most roofers charge a minimum call-out of $150–$300.
How much does a roof inspection cost in Canton?
$95–$365 for an inspection with a written report. Many roofers inspect free when quoting a replacement; pay for an independent one before a home purchase or an insurance dispute.
How much does it cost to replace a 1,500 sq ft roof in Canton?
$5,800–$12,000 in architectural shingles with tear-off (15 squares). A 2,500 sq ft roof is $9,650–$20,000, a steep or two-story 2,500 sq ft roof $10,600–$22,800, and 3,000 sq ft $11,550–$24,000.
Do I need a licensed roofer in Ohio?
Ohio has no state roofing license; roofers register with the Secretary of State and cities license contractors themselves, so ask for proof of insurance and the permit.
Does the price include tearing off the old roof?
It should: tear-off and disposal of one layer is $95–$280 a square and is built into the prices above. A second layer costs the same again. A quote that is far cheaper may be a roof-over (new shingles on top of old), which code allows once but never over two layers, and which shortens the roof's life.
How long does a roof replacement take?
One to three days for a 20-square shingle roof with a crew of four to six, weather permitting; a steep or cut-up roof, tile, slate or metal takes three to five days. The roof is covered with underlayment or tarps overnight.
What's included in a Canton roofing quote?
Tear-off, disposal, underlayment, ice-and-water shield, drip edge, flashing, a ridge vent, the shingles, cleanup and the permit. Often extra: rotted decking ($65–$150 a sheet), a second layer (another $95–$280 a square), chimney flashing ($285–$1,400) and solar panel detach and reset ($3,800–$5,500).
Prices verified November 2026 · Cross-referenced against 221+ American pricing sources · See methodology
Prices for the Canton metro area, November 2026. Outer suburbs may vary.
Get a fair roof replacement quote in Canton
Local roofers · Free quotes · No obligation, no spam.