Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Local Going Rate — Independent · Data-Driven · American2026 edition195 US cities
Cost guide / Concrete / USAVerified November 2026

Concrete Cost USA 2026

By Our research team · Last verified · 12 min read · Methodology

Concrete cost

Concrete costs in the US

United States
Get free quotesFree · no obligation · max 2 pros
Normal range across the US
$2,400–$6,000per 400 sq ft

What most homeowners pay for concrete job, labor, 4 in of 3,000–4,000 psi concrete, gravel base and forms included. Pick your city for local prices.

How we get this data
Typical
$3,800
Low end
$1,600
High end
$9,000
Cities priced
195
Sources
20+
Trades priced
39
Verified
November 2026

Pouring a 2-car concrete driveway costs $2,400–$6,000 in the US in 2026 — 400 sq ft, 4 in thick, plain finish — and most homeowners pay about $3,800, or $6–$15 a square foot. A plain slab of any size runs $6–$12 a square foot, stamped concrete $10–$19, a 12 × 16 patio $1,150–$2,500, and ready-mix concrete $125–$200 a cubic yard delivered.

01 / The short answerUSA
Quick answer

$2,400–$6,000 to pour a 2-car concrete driveway in the US — 400 sq ft, 4 in thick, plain finish — $3,800 typical. A plain slab runs $6–$12 a square foot, stamped concrete $10–$19, and ready-mix $125–$200 a cubic yard. Pick your city ↓

  • 2-car driveway, 400 sq ft, 4 in: $2,400–$6,000 ($3,800 typical)
  • Plain slab $6–$12 per sq ft; 6 in with rebar $8–$15; stamped $10–$19
  • Ready-mix $125–$200 per cubic yard; removal $2–$7 per sq ft
  • Patio 12 × 16 $1,150–$2,500; garage slab 24 × 24 $4,000–$8,600
  • Pick a city below for local prices across 195 US metros

Prices below come from national cost guides, dated city price pages, ready-mix and home-center material prices, federal wage data for cement masons and concrete finishers, the residential building code and state licensing boards, applied across 195 US metros and re-checked in November 2026. Installed prices include labor, 3,000–4,000 psi concrete, a gravel base and forms; removal, pumping, decorative finishes and sealing are their own rows. Pick your city for local pricing.

A plain 400 sq ft driveway on a flat, cleared lot in a cheap market, with the truck backed up to the forms, can come in near $1,600; the same footprint stamped and colored, 6 in thick with rebar, on a sloped lot that needs a pump and demolition in a top-cost city can reach $9,000. The concrete is a small share of any bill: about 5.5 cubic yards at $125–$200 for a 2-car driveway. Most of a quote is a crew's two days of grading, base, forms, steel, pouring and finishing. The highest typical price on our city pages is New York ($4,350); the lowest is Winston-Salem ($3,450).

Prices verified November 2026 · Cross-referenced against 20+ American pricing sources · See methodology

02 / Prices by city195 metros

Concrete cost by city

Typical concrete ranges, re-verified November 2026 across 20+ sources. Largest cities first.

Typical concrete price in the 20 largest US metrosTypical price, per 400 sq ft. The line marks the US typical.
New York, NY $4,350
Chicago, IL $4,250
Boston, MA $4,200
Seattle, WA $4,200
Denver, CO $3,950
Detroit, MI $3,900
San Diego, CA $3,900
Phoenix, AZ $3,850
Houston, TX $3,800
Atlanta, GA $3,800
Miami, FL $3,750
Riverside, CA $3,750
Dallas, TX $3,700
Tampa, FL $3,650

Among the biggest metros, New York is the priciest at $4,350 and Tampa the least at $3,650.

How concrete prices vary across 195 US metrosNumber of metros at each typical price, per 400 sq ft.

Half of the 195 metros we price sit between $3,600 and $3,850.

CityTypical range
New York, NY$2,750–$6,550 per 400 sq ft
Los Angeles, CA$2,700–$6,450 per 400 sq ft
Chicago, IL$2,700–$6,400 per 400 sq ft
Dallas, TX$2,350–$5,900 per 400 sq ft
Houston, TX$2,400–$6,000 per 400 sq ft
Washington, DC$2,450–$6,050 per 400 sq ft
Atlanta, GA$2,400–$6,000 per 400 sq ft
Philadelphia, PA$2,500–$6,150 per 400 sq ft
Miami, FL$2,400–$5,900 per 400 sq ft
Phoenix, AZ$2,450–$6,050 per 400 sq ft
Boston, MA$2,650–$6,350 per 400 sq ft
San Francisco, CA$2,550–$6,200 per 400 sq ft
Riverside, CA$2,400–$5,950 per 400 sq ft
Detroit, MI$2,450–$6,100 per 400 sq ft
Seattle, WA$2,650–$6,400 per 400 sq ft
Minneapolis, MN$2,550–$6,200 per 400 sq ft
San Diego, CA$2,500–$6,100 per 400 sq ft
Tampa, FL$2,350–$5,750 per 400 sq ft
Orange County, CA$2,500–$6,100 per 400 sq ft
Denver, CO$2,500–$6,150 per 400 sq ft
Oakland, CA$2,500–$6,150 per 400 sq ft
Charlotte, NC$2,350–$5,700 per 400 sq ft
Baltimore, MD$2,350–$5,850 per 400 sq ft
St. Louis, MO$2,450–$6,100 per 400 sq ft
Orlando, FL$2,350–$5,700 per 400 sq ft
Brooklyn, NY$2,550–$6,200 per 400 sq ft
San Antonio, TX$2,300–$5,600 per 400 sq ft
Fort Worth, TX$2,300–$5,650 per 400 sq ft
Austin, TX$2,350–$5,750 per 400 sq ft
Portland, OR$2,550–$6,250 per 400 sq ft
Choose your city51 states

Each city page has local rates by area, real-world concrete work costs and a city-specific FAQ. Prices shown are the low end of the typical range, per 400 sq ft.

Alabama

Alaska

Arizona

Arkansas

California

Colorado

Connecticut

Delaware

District of Columbia

Florida

Georgia

Hawaii

Idaho

Illinois

Indiana

Iowa

Kansas

Kentucky

Louisiana

Maine

Maryland

Massachusetts

Michigan

Minnesota

Mississippi

Missouri

Montana

Nebraska

Nevada

New Hampshire

New Jersey

New Mexico

New York

North Carolina

North Dakota

Ohio

Oklahoma

Oregon

Pennsylvania

Rhode Island

South Carolina

South Dakota

Tennessee

Texas

Utah

Vermont

Virginia

Washington

West Virginia

Wisconsin

Wyoming

03 / National price listCONCRETE · USA

Concrete prices, 2026

JobLowTypicalHigh
Concrete driveway, 2-car, 20 × 20 ft (400 sq ft), 4 in, plain finish, installedper 400 sq ft$2,400$3,800$6,000
Plain concrete slab, 4 in, broom finish, installedper sq ft$6$9$12
Concrete slab, 6 in with rebar (trucks, RVs, shops), installedper sq ft$8$11$15
Rebar or wire-mesh reinforcement, added to a slab, per 100 sq ftper 100 sq ft$100$175$300
Colored concrete (integral color), installedper sq ft$8$10$13
Exposed aggregate finish, installedper sq ft$8$11$14
Stamped concrete, installedper sq ft$10$14$19
Stain an existing slab (acid or water-based), sealedper sq ft$3$6$10
Polish an existing concrete slabper sq ft$3$6$10
New slab poured and polishedper sq ft$9$15$22
Resurface or overlay existing concrete (spray-on or microtopping)per sq ft$3$5$8
Stamped or exposed-aggregate driveway, 2-car, 400 sq ftper 400 sq ft$4,000$5,600$7,600
Concrete walkway, 4 × 50 ft (200 sq ft), 4 in, plainper walkway$1,200$1,800$2,600
Concrete patio, 12 × 16 ft (192 sq ft), plain broom finishper patio$1,150$1,750$2,500
Shed or small slab, 10 × 12 ft (120 sq ft), 4 inper slab$850$1,200$1,700
Garage slab, 24 × 24 ft (576 sq ft), 4–6 in with rebarper slab$4,000$5,800$8,600
Poured concrete steps, 3–4 risers, 4 ft wideper set$1,000$1,800$3,200
Concrete footings, 12 × 24 in with rebar, per linear ftper linear ft$20$32$48
Slab-on-grade foundation (monolithic, thickened edge), per sq ftper sq ft$6$10$14
Remove and haul away old concrete, 4 in unreinforcedper sq ft$2$4$7
Seal a 400 sq ft driveway or patio (pro, one coat)per job$350$600$900
Ready-mix concrete, 3,000–4,000 psi, deliveredper cubic yard$125$160$200
Concrete pump truck (line or boom), per jobper job$500$850$1,400
Concrete crew labor, per worker per hourper hour$45$70$100
concrete jobs: what they cost in the USPer sq ft, low to high with the typical price marked. Every line is in the table above.
New slab poured and polished $15$9–$22
Stamped concrete, installed $14$10–$19
Concrete slab, 6 in with rebar (trucks, RVs, shops), installed $11$8–$15
Exposed aggregate finish, installed $11$8–$14
Colored concrete (integral color), installed $10$8–$13
Slab-on-grade foundation (monolithic, thickened edge), per sq ft $10$6–$14
Plain concrete slab, 4 in, broom finish, installed $9$6–$12
Stain an existing slab (acid or water-based), sealed $6$3–$10
Polish an existing concrete slab $6$3–$10
Resurface or overlay existing concrete (spray-on or microtopping) $5$3–$8
Remove and haul away old concrete, 4 in unreinforced $4$2–$7

Prices verified November 2026 · Cross-referenced against 20+ American pricing sources · See methodology

National average prices. Select a city above for location-specific pricing.

Already got a quote?
See if it's fair against US prices. Free, no sign-up.

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local concrete contractors

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need poured?

Tap one to start.

04 / Who to hireFINISH OR TYPE

Plain, Stamped, Colored, Polished: Concrete Costs by Finish

Plain broom-finished concrete is $6–$12 a square foot installed. Color adds a little, exposed aggregate and stamping add a lot, and staining or polishing an existing slab is the cheap way to a new look. Prices include labor and materials.

Finish or typeCostBest for
Plain concrete, broom finish$6–$12 per sq ftDriveways, garage floors, shed pads and plain patios. The cheapest finish and the easiest to repair.
Colored concrete (integral color)$8–$13 per sq ftPigment mixed into the whole load, so chips and wear show the same color. Earth tones cost least; blues and greens most.
Exposed aggregate$8–$14 per sq ftSlip-resistant pool decks, walkways and driveways. The top of the slab is washed off to show the stone.
Stamped concrete$10–$19 per sq ftPatios, pool decks and front walks that should look like stone, slate or brick. Needs resealing every 2–3 years.
Stained concrete (existing slab)$3–$10 per sq ftGiving a sound existing patio or floor color without a new pour. Acid stain is mottled; water-based stain is more even.
Polished concrete (existing slab)$3–$10 per sq ftGarage, basement and interior floors ground to a shine. Not for driveways — polished surfaces are slippery when wet.
New slab, poured and polished$9–$22 per sq ftA finished interior floor in one project: the slab plus the grinding and polishing passes.
Resurfacing overlay$3–$8 per sq ftA sound slab with surface flaws. A thin cement overlay hides spalling and stains for a fraction of a tear-out.
Heavy-duty 6 in slab with rebar$8–$15 per sq ftRV pads, truck parking, workshops and anywhere a trailer or lift will sit. Half again as strong as a 4 in slab.
Cost by finish or typeTypical range, per sq ft.
Plain concrete, broom finish $6–$12per sq ft
Colored concrete (integral color) $8–$13per sq ft
Exposed aggregate $8–$14per sq ft
Stamped concrete $10–$19per sq ft
Stained concrete (existing slab) $3–$10per sq ft
Polished concrete (existing slab) $3–$10per sq ft
New slab, poured and polished $9–$22per sq ft
Resurfacing overlay $3–$8per sq ft
Heavy-duty 6 in slab with rebar $8–$15per sq ft

Finish is the one choice that can double a bill: a 2-car driveway is $2,400–$6,000 plain and $4,000–$7,600 stamped. Decorative finishes also need resealing every 2–3 years, and a stamped or colored repair never quite matches, so most contractors suggest plain concrete where cars park and decorative work where people sit and walk.

05 / Rates & packagesUSA

Common Concrete Jobs and What They Cost (2026)

A 2-car driveway costs $2,400–$6,000 and takes two to three days, then a week before you park on it. Time on site is in brackets; concrete cures for 28 days after that.

Block or rateLowTypicalHigh
Pour a 2-car driveway, 400 sq ft, 4 in plain (2–3 days)$2,400$3,800$6,000
Remove an old 400 sq ft driveway (1 day)$800$1,600$2,800
Remove and replace a 2-car driveway (3–4 days)$3,200$5,400$8,800
Stamped or exposed-aggregate 2-car driveway (3–4 days)$4,000$5,600$7,600
Pour a 12 × 16 patio, plain (1 day)$1,150$1,750$2,500
Pour a 12 × 16 stamped patio (1–2 days)$1,900$2,700$3,650
Pour a 4 × 50 ft walkway (1 day)$1,200$1,800$2,600
Pour a 10 × 12 shed slab (half a day)$850$1,200$1,700
Pour a 24 × 24 garage slab with rebar (1–2 days)$4,000$5,800$8,600
Pour 3–4 concrete steps (1–2 days incl. forms)$1,000$1,800$3,200
Resurface a 400 sq ft driveway with an overlay (1–2 days)$1,200$2,000$3,200
Seal a 400 sq ft driveway or patio (half a day)$350$600$900
Stain an existing 192 sq ft patio (1 day)$575$1,150$1,900
Pump truck for a back-yard pour (added)$500$850$1,400

What moves these prices: square feet and thickness, the finish, whether old concrete has to come out, whether the truck can reach the forms, the base work the site needs, your city's labor rates and the season. Crews bill $45–$100 an hour per worker when they work by the hour; nearly all of the jobs above are quoted flat.

06 / Your optionscompared

Concrete vs Asphalt vs Pavers: What Each Driveway Costs and Why

A 2-car concrete driveway costs $3,800 typical, asphalt about $2,800 for the same 400 sq ft, and pavers $6,800. Same footprint, three very different lifespans.

FactorPoured concreteAsphaltPavers
Typical price, 400 sq ft$3,800 ($2,400–$6,000)$2,800 ($1,600–$5,200)$6,800 ($4,000–$12,000)
Per square foot$6–$12$4–$13$10–$30
Lifespan30–40 years15–30 yearsUp to 75 years
UpkeepSeal every 2–5 years ($350–$900); patch cracksSealcoat every 2–3 years; resurface at 10–15Re-sand joints; lift and reset settled pavers
WeatherAir-entrained mix and joints handle freeze-thaw; stains from oilSoftens in heat; flexes with frost; cheapest where winters are hardBest for frost heave — pavers move and go back; weeds in joints
Time before use7–10 days2–3 daysSame day
Finish optionsBroom, color, exposed aggregate, stamped ($10–$19/sq ft)Black; stamped asphalt is rareHundreds of shapes and colors; borders
Watch out for3.5 in pours, no base, no joints, 2,500 psi mixThin lifts, no base, pouring in cold weatherThin bedding, no edge restraint, polymeric sand skipped

Concrete is the middle choice on price and the easiest to match to the house. If your lot heaves badly every winter, pavers forgive it; if you need the cheapest hard surface for a long rural drive, asphalt or gravel ($1–$3 a square foot) wins. Spread over its life, a $3,800 concrete driveway is about $110 a year.

07 / Beyond the jobextras

Ready-Mix, Delivery Fees and Upkeep Costs

Ready-mix concrete costs $125–$200 a cubic yard delivered and one yard covers about 81 sq ft at 4 in. Small orders pay a short-load fee, far sites pay mileage, and decorative concrete needs resealing every 2–3 years at about $240 a year.

ItemLowTypicalHigh
Ready-mix, 3,000 psi, per cubic yard delivered$125$155$195
Ready-mix, 4,000 psi, per cubic yard delivered$135$165$205
Short-load fee, per yard short of a full truck$40$60$110
Delivery beyond the plant's radius, per mile$6$10$15
Concrete pump truck, per job$500$850$1,400
Concrete mix, 80 lb bag$6$7$9
Rebar, #4 × 20 ft stick$12$16$22
Concrete sealer, per gallon$16$30$50
Resealing a 400 sq ft decorative slab, per year (every 2–3 years)$140$240$360
Right-of-way or driveway permit$50$150$350

Resealing per year = the $350–$900 sealing job divided by the 2–3 year interval. Plain broom-finished concrete does not need sealing to survive; it needs it to stay clean. A $3,800 driveway that lasts 30–40 years costs about $110 a year before upkeep.

08 / What moves the priceUSA

What affects concrete costs

Square feet and thickness

Plain 4 in concrete is $6–$12 a square foot; 6 in with rebar $8–$15. Small pours cost the most per square foot: a 10 × 12 slab is $850–$1,700 ($7–$14 a square foot) and a 24 × 24 garage slab $4,000–$8,600 ($6–$14).

Finish

Broom finish is the base price. Integral color is $8–$13 a square foot, exposed aggregate $8–$14, stamped $10–$19. A stamped 2-car driveway is $4,000–$7,600 against $2,400–$6,000 plain.

What has to come out

Removing old concrete is $2–$7 a square foot including hauling and landfill fees — $800–$2,800 for a 2-car driveway. Reinforced and 6 in slabs cost more to break.

Access

If the mixer cannot back up to the forms, a pump adds $500–$1,400. Orders under a full truck pay $40–$110 a yard short, and sites beyond the plant's radius pay $6–$15 a mile.

Your city

Labor is 40–55% of the bill and follows local wages. New York ($4,350 typical for a 2-car driveway) sits at the top and Winston-Salem ($3,450) at the bottom, against the US typical of $3,800. Cement masons' median pay runs from about $44,000 a year in Mississippi and Alabama to over $77,000 in Illinois and Washington.

Climate and season

Where winters freeze, the code wants 3,500 psi air-entrained concrete and footings below the frost line; where summers pass 90°F, crews pour at dawn with retarders. Both add a little, and the busy season books up weeks ahead.

09 / How to pay lessUSA

How to save on concrete

  1. Pour everything in one visit.A driveway, walkway and patio on one day share one setup and one truck. Alone, a 10 × 12 slab costs $850–$1,700; as part of a bigger pour it adds far less.
  2. Keep the truck close.Clear the path so the mixer reaches the forms and you avoid a $500–$1,400 pump charge and the labor of wheelbarrows.
  3. Put the finish where it shows.Stamp the walk and the patio ($10–$19 a square foot); leave the driveway in broom finish ($6–$12). A stamped border on a plain driveway gives most of the look for a fraction of the price.
  4. Fix the surface, not the slab.If the slab is sound, an overlay at $3–$8 a square foot or a stain at $3–$10 costs less than removal ($2–$7) plus a new pour.
  5. Book the shoulder season.Late fall in the South and late winter where the ground is not frozen are slow for concrete crews. Pours still need to stay above 40°F for the first days.
  6. Get the spec in writing.Quotes $1,400 apart on one driveway usually differ on thickness, base, steel and psi, not skill. Make both say 4 in, 3,000–4,000 psi, 4 in of compacted base and the reinforcement.

Get two real quotes

Local concrete contractors · free · max 2 will contact you · no spam.

Get quotes →
10 / By sizescale

Concrete Cost by Project Size

Quick answer

Shed slab, 10 × 12 ft: $850–$1,700. Patio, 12 × 16 ft: $1,150–$2,500. 2-car driveway, 20 × 20 ft: $2,400–$6,000. Garage slab, 24 × 24 ft: $4,000–$8,600. 3-car driveway, 24 × 36 ft: $5,200–$10,350. Slab foundation for a 1,500 sq ft home: $9,000–$21,000.

Worked example: a 2-car driveway, 400 sq ft, is about $3,800. Add a 4 × 50 ft walkway at $1,800 and a 12 × 16 patio at $1,750, poured the same day, and the job is roughly $7,350 for about 792 sq ft, which is why one combined quote costs less than three separate ones: the truck, the crew and the setup come once, and the ready-mix order clears the short-load fee.

The rate falls as the pour grows and rises with thickness. A 10 × 12 shed slab is $7–$14 a square foot, a 2-car driveway $6–$15, a 3-car driveway $6–$11; going from 4 in to 6 in with rebar takes a square foot from $6–$12 to $8–$15. A slab that carries a house is a different job again — $6–$14 a square foot with its footings — because the edges must reach below the frost line and pass an inspection.

11 / Before you pay a depositchecklist

What a concrete quote should include

A real concrete quote answers all of these. If it answers fewer than six, ask before you pay a deposit.

  • The area in square feet with dimensions, and the slab thickness (4 in for cars, 5–6 in for trucks and RVs)
  • The concrete mix: psi and cubic yards; 'air-entrained' where winters freeze
  • Base: excavation depth and inches of compacted gravel; vapor barrier under any garage or interior slab
  • Reinforcement: wire mesh or rebar, bar size and spacing
  • Removal and disposal of existing concrete as its own line, with landfill fees
  • Finish, color and sealer, and the control-joint spacing and method (tooled or saw-cut)
  • Truck access, any pump charge, and the short-load fee on small pours
  • Permit and right-of-way fees, and who pulls the permit
  • Start and pour dates, cure time before use, payment stages, warranty and proof of insurance
11.1 / Permits, codes and frost depthUSA

Permits, the residential code and the frost line: what the rules add to a concrete job

A driveway, sidewalk or apron that touches the public right-of-way needs a permit in most US cities — $50–$350 — and anything that carries a structure needs a footing inspected before the pour. The code also sets the mix: at least 3,000 psi outdoors where it freezes a little, 3,500 psi with air entrainment where it freezes hard.

MetroFrost / footing depthWhat it means for concrete work
Minneapolis42 inMinnesota's severe freeze-thaw; air-entrained 4,000 psi mixes are the norm for exterior slabs
Chicago42 insevere weathering region; city sidewalk work needs a Public Way permit
Boston48 indeepest frost line of the big metros; posted road weight limits stop ready-mix deliveries in spring thaw
Detroit42 insevere weathering; de-icing salt spalls low-psi concrete
Denver36 inexpansive clay plus freeze-thaw: thicker slabs, more joints
New York36 inmoderate-to-severe weathering; sidewalk flags are the homeowner's responsibility
Boise24 inhigh-desert freeze-thaw; air-entrained mix required outdoors
Seattle12 inmild winters, wet ground; drainage under the slab matters more than frost
Atlanta12 inshallow frost; red clay needs a compacted gravel base
Dallas6 inexpansive clay is the design problem, not frost
HoustonNoneno frost line; clay soils and drainage drive the base design
PhoenixNoneno frost; hot-weather pours start before dawn in summer
Los AngelesNoneno frost; the C-8 concrete license applies at $1,000 and up

Frost depths are the common local footing depths used by building departments; your city's figure governs. Flatwork (driveways, patios) does not need frost-depth footings, but slabs that carry a roof or a wall do.

The International Residential Code, which most states and cities adopt with local changes, is specific about residential concrete. Slabs must be at least 3.5 in thick (R506.1) over a 4 in base of gravel, crushed stone or sand unless the soil drains well (R506.2.2), with a 6-mil polyethylene vapor retarder under interior slabs (R506.2.3) under any slab inside the house. Footings go at least 12 in below undisturbed ground and below the frost line (R403.1.4), and are at least 12 in wide on ordinary soil. Table R402.2 sets the mix by climate: 2,500 psi where weathering is negligible, 3,000 psi in the moderate band, 3,500 psi where it is severe, and exterior slabs in the moderate and severe bands must be air-entrained (5–7% air entrainment for exterior slabs in moderate and severe weathering regions) so freeze-thaw cycles and de-icing salt do not spall the surface.

Permits follow the property line. Work inside your lot — a patio, a shed slab, a driveway replaced on the same footprint — is exempt in many cities or needs only an over-the-counter permit. The apron and curb cut at the street, and any public sidewalk panel, are in the right-of-way: the city sets the thickness (often 6 in), may require a bonded contractor, and inspects. Fees in our sources run $50–$350; a sidewalk or curb-cut permit in a big city can be more, and some cities waive the fee when an apron already exists.

  • Ask who pulls the permit and whether the price includes it — a contractor who says a driveway never needs one has not asked
  • Where it freezes: the quote should say 'air-entrained' and 3,500–4,000 psi; a 2,500 psi mix is cheaper and spalls
  • Any slab with a footing (garage, addition, carport posts) needs an inspection before the pour; schedule it into the timeline
  • HOAs often regulate driveway width, aprons and decorative finishes — get approval before the forms go in

Licensing is a state matter, covered in the table below; none of this is legal advice.

11.2 / Who may pour concrete for payby state

Does your concrete contractor need a license? State rules, and the insurance a real quote carries

Western states license concrete as its own trade; most of the rest leave flatwork to city registration and insurance. Where the state has no license, the checks that matter are a certificate of general liability insurance, workers' compensation for the crew, and the local permit pulled in the contractor's name.

StateRuleThresholdNote
CaliforniaC-8 Concrete contractor license (CSLB)Any job of $1,000 or more, labor and materials togetherThreshold rose from $500 on January 1, 2025; unlicensed work must be advertised as such
ArizonaRegistrar of Contractors licenseResidential concrete classificationAsk for the ROC number; handyman exemption stops at $1,000 and no permit
NevadaState Contractors Board license (C-5 concrete)All contractingHandyman exemption only under $1,000 with no permit
OregonConstruction Contractors Board licenseAll paid construction workCasual minor work under $1,000 exempt
WashingtonContractor registration (L&I)All paid workBond and insurance on file; check the L&I lookup
UtahDOPL specialty licenseJobs of $3,000 and upHandyman exemption to $3,000 with no permit
FloridaNo state license for concrete flatworkCounty or city competency card in many countiesDriveways and slabs still need a local permit in most cities
TexasNo state license for concrete work—Cities register contractors who pull right-of-way permits
Illinois, Ohio, Colorado, Georgia, Pennsylvania and about 20 othersNo state concrete licenseCity or county registrationCheck insurance and the local permit

From state licensing boards and 2026 licensing guides (sources in our research notes). Rules change; confirm with your state board before you book. Not legal advice.

California is the strictest: any concrete job of $1,000 or more, labor and materials together, needs a C-8 contractor licensed by the CSLB, and the $500 limit that applied until 2024 rose to $1,000 on January 1, 2025. Arizona, Nevada, Utah, Oregon and Washington license or register every paid contractor, concrete included. Florida and Texas have no state license for flatwork, so a business card proves nothing there; the local permit and the insurance certificate do the work instead.

A mixer truck on your lawn, a trench next to a gas line and a crew working a $3,800 job without insurance is your risk, not theirs. Ask for the certificate naming the contractor's business, and check that the permit is pulled in the contractor's name rather than yours — a homeowner permit shifts the liability to you.

  • Where the state licenses concrete work: the license number on the quote, checked on the board's site
  • Everywhere: a certificate of general liability insurance and workers' comp if a crew is coming
  • The permit in the contractor's name, with the city's apron and sidewalk spec attached
  • A written warranty against cracking beyond hairline and against settling, with a term
11.3 / Cement and ready-mix prices in 2025–2026materials

What concrete costs in 2026, and why the per-yard price keeps rising

Ready-mix is $125–$200 a cubic yard delivered in 2026, $160 typical, after several years of increases that outran general inflation. Cement — about a tenth of the mix by weight but most of its cost — has risen each January as producers post list increases, and 2025 tariffs on imported cement and steel added to the pressure.

ItemPriceGrade or noteSource
Ready-mix, 3,000 psi$125–$195 per yardMost driveways and patiosNational cost guides, 2025–2026
Ready-mix, 4,000 psi$135–$205 per yardGarages, severe weatheringNational cost guides, 2025–2026
Short-load fee$40–$110 per yard shortOrders under a full truckSupplier price lists
Concrete mix, 80 lb bag$6–$945 bags per yard = $270–$405Home-center shelf prices, Nov 2026
Rebar, #4 (1/2 in) × 20 ft$12–$22About 1 stick per 25 sq ft on an 18 in gridHome-center shelf prices, Nov 2026
Wire mesh, 5 × 10 ft sheet$10–$206-gauge, 6 × 6 inHome-center shelf prices, Nov 2026
Concrete sealer$16–$50 per gallon150–300 sq ft per gallonNational cost guides, 2026
Cement, bulk$150–$170 per tonUS average, 2025USGS Mineral Commodity Summaries

Shelf and list prices before contractor discounts. Ready-mix is quoted delivered inside the plant's radius.

Materials are 45% to 60% of a flatwork bill — the 5.5 yards in a 2-car driveway cost $690–$1,100 of a $2,400–$6,000 job, plus gravel, forms and steel — so a 5% move in ready-mix moves the installed price about 2%. Our model carries 3% for materials this year and 4.3% for labor (federal median pay for cement masons and concrete finishers, May 2024 to May 2025), which lands the installed price at about 3.7% above a year ago.

The pressure comes from three places. Cement producers post annual list increases every January, and most ready-mix plants pass them through in the spring. Tariffs imposed in 2025 on imports from Canada, Mexico and other suppliers reached cement, which the US imports to cover about a fifth of what it uses, and reinforcing steel. And diesel moves the delivery charge on every truck. None of this changes the advice: the concrete is the small part of the quote, and the crew's time is the big one.

  • A 4,000 psi mix costs about $10 a yard more than 3,000 psi — $55 on a 2-car driveway — and is worth it anywhere it freezes
  • Ask when the quote was priced: ready-mix quotes are usually good for 30 days, and plants reprice in spring
  • Bagged concrete at $270–$405 a yard only wins against a delivery below about one yard

If a quote jumps between the estimate and the invoice, the per-yard price is rarely the real reason; ask what changed in the scope or the yardage.

11.4 / Cheap quotes, seasons and DIYUSA

What the cheap quote leaves out, when to pour, and the DIY math

Two quotes for the same driveway can be $1,400 apart, and the gap is usually in the ground, not the finish. Thickness, base, steel, mix strength and disposal are where a low bid saves its money. Here is what to check, when crews discount, and when pouring it yourself pays.

Timing moves the price too. Concrete needs to stay above 40°F for the first days — below that, crews use blankets, heated enclosures or accelerators, or stop for the winter in the northern half of the country — and pours above 90°F need an early start, ice in the mix or a retarder so the surface does not set before it is finished. Late spring through early fall is the rush; contractors with gaps in late fall (south) or late winter (where the ground is not frozen) often sharpen their price, and ready-mix plants reprice upward in spring.

The DIY math: a 10 × 12 shed slab is $850–$1,700 installed. Done yourself it is about 67 bags of mix ($405–$610) or 1.5 yards delivered with a short-load fee, plus gravel, forms, mesh and $222–$292 of tool rental — roughly half the price for a very long day with a helper. A 2-car driveway is 5.5 yards that must be placed, screeded and finished in about two hours before it sets, with a crew of three or four at $45–$100 an hour each; that is not a first project. Removal is the other place DIY tempts: 400 sq ft of 4 in concrete is about 10 tons, and a rented breaker plus a dumpster and landfill fees at $90–$160 a ton often lands within a few hundred dollars of a contractor's $800–$2,800.

  1. 3.5 inches instead of 4.Half an inch saves about an eighth of the concrete and is invisible once poured. Ask for the thickness in writing and look at the forms before the truck comes.
  2. No compacted base.Concrete poured on dirt cracks and settles. A 4 in compacted gravel base is $1–$3 a square foot; a quote that does not mention base depth is skipping it.
  3. No reinforcement, or 'fiber only' on a driveway.Wire mesh or a rebar grid is $100–$300 per 100 sq ft. Fiber helps with surface cracking; it does not hold a cracked panel together.
  4. A weaker, cheaper mix.2,500 psi costs about $15 a yard less than 3,000 psi and spalls in freeze-thaw country. Get the psi and 'air-entrained' on the quote where it freezes.
  5. Removal and disposal left out.Breaking out and hauling an old 400 sq ft driveway is $800–$2,800. If the bid says 'remove existing' with no number, ask for one.
  6. No control joints, no sealer, no permit.Joints every 8–12 ft are what keep cracks straight; sealing is $350–$900; the right-of-way permit $50–$350. A bid that is silent on all three will add them later or skip them.

If you want a cheaper pro job without the corner-cutting, pour everything at once, clear the truck's path so no pump is needed ($500–$1,400 saved), keep the finish plain where it does not show, and book the shoulder season.

12 / QuestionsUSA

Concrete cost: FAQ

How much does a concrete driveway cost?

$2,400–$6,000 for a 2-car, 20 × 20 ft driveway, 4 in thick with a plain finish, with $3,800 typical in 2026. Removing the old driveway first adds $800–$2,800; a stamped finish takes it to $4,000–$7,600.

How much does concrete cost per square foot?

$6–$12 per square foot installed for a plain 4 in slab, $8–$15 for 6 in with rebar, $8–$14 for exposed aggregate and $10–$19 stamped. Small pours cost more per square foot than large ones.

How much is a cubic yard of concrete?

$125–$200 per cubic yard for 3,000–4,000 psi ready-mix delivered, about $160 typical, plus a short-load fee of $40–$110 a yard on orders under a full truck. A yard covers about 81 sq ft at 4 in.

How much does a concrete slab cost?

$6–$12 a square foot for plain 4 in flatwork: $850–$1,700 for a 10 × 12 shed slab, $2,400–$4,800 for 20 × 20, $4,000–$8,600 for a 24 × 24 garage slab with rebar. A monolithic slab foundation is $6–$14 a square foot.

How much does a concrete patio cost?

$1,150–$2,500 for a plain 12 × 16 ft patio, $1,550–$2,700 in exposed aggregate and $1,900–$3,650 stamped.

How much does it cost to remove concrete?

$2–$7 per square foot including hauling and landfill fees — $800–$2,800 for a 400 sq ft driveway. Reinforced or 6 in slabs cost more to cut and lift.

Do I need a permit or a licensed contractor for concrete work?

A patio or slab inside your lot often needs no permit or an over-the-counter one; a driveway apron, curb cut or sidewalk panel in the public right-of-way nearly always does, and any slab that carries a structure needs a footing inspection. California licenses concrete work from $1,000 a job; Arizona, Nevada, Utah, Oregon and Washington license or register all contractors; Florida, Texas and about 20 other states leave flatwork to city registration. Everywhere, ask for proof of insurance. Not legal advice.

How thick should concrete be?

Four inches of 3,000–4,000 psi concrete over 4 in of compacted gravel for driveways, patios and walkways; 5–6 in with rebar ($8–$15 a square foot) for garages, RV pads and anything a truck uses. The code minimum is 3.5 in.

Is it cheaper to pour concrete yourself?

For a small pad, yes: a 10 × 12 slab is $850–$1,700 installed and roughly half that in bags, gravel, forms and a day of tool rental ($222–$292). A driveway's 5.5 yards must be placed and finished in about two hours by a crew; hire that out.

Are concrete prices going up in 2026?

Yes, about 3.7% over the past year in our model: cement masons' median pay rose 4.3% in federal data (May 2024 to May 2025) and ready-mix rose with cement list prices and 2025 tariffs on imported cement and steel. Materials are about half the bill, so a 5% move in ready-mix moves a quote about 2%.

Done your research?

Pick your city for local prices, or get two real concrete quotes now. Free, no spam.

Get quotes →
Get concrete quotesMax 2 concrete contractors · free · no spam→