Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does concrete cost in Chicago?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched11 min read
Concrete cost

Concrete costs in Chicago

Chicago, ILChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Chicago, IL
$2,700–$6,400per 400 sq ft

Most concrete contractors in Chicago charge $2,700–$6,400 to pour a 2-car driveway 400 sq ft, 4 in thick, plain finish, with $4,250 the typical bill. A plain slab runs $7–$13 a square foot; a 12 × 16 patio $1,300–$2,700.

How we get this data
Typical
$4,250
Low end
$1,950
High end
$10,950
2-car driveway
$2,700–$6,400
Plain slab, per sq ft
$7–$13
Stamped, per sq ft
$11–$20
Ready-mix, per cubic yard
$135–$210

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local concrete contractors send you a real quote. Free, no obligation.

Get my fair quote →
Typical concrete price: Chicago vs nearby citiesTypical price, per 400 sq ft. The line marks the US typical.
Chicago, ILThis guide $4,250
Rockford, IL $4,050
Champaign, IL $4,050
Milwaukee, WI $3,950
Madison, WI $3,900

The typical Chicago price is $4,250, 12% above the US typical of $3,800.

Where Chicago sits among 195 US metrosNumber of metros at each typical concrete price, per 400 sq ft.

Chicago's price band

Chicago is pricier than 98% of the 195 US metros we price for concrete work.

A concrete contractor in Chicago charges $2,700–$6,400 to pour a 20 × 20 ft driveway, 4 in thick with a broom finish, and most homeowners pay about $4,250. Removing the old driveway first adds $800–$3,200, a stamped finish takes the same driveway to $4,400–$8,000, and ready-mix concrete costs $135–$210 a cubic yard delivered.

Chicago is a big, high-cost metro for construction labor. A driveway here is about 12% above the US typical of $3,800. About half of a flatwork bill is labor, so local pay moves the price; the other half — ready-mix at $135–$210 a yard, gravel, forms and steel — moves less from city to city.

Illinois has no state license for concrete flatwork, so check city or county contractor registration, ask for proof of insurance, and expect a right-of-way permit for any apron, curb cut or sidewalk panel. Chicago licenses general contractors and requires a Public Way permit for sidewalk and apron work. This is general information, not legal advice.

Comparing cities, or after the US-wide picture? See the national guide: Concrete cost in the USA.

Quick answer

$2,700–$6,400 to pour a 2-car concrete driveway in Chicago — 400 sq ft, 4 in thick, plain finish — typically $4,250. A plain slab runs $7–$13 a square foot, stamped concrete $11–$20, and a 12 × 16 patio $1,300–$2,700. Verified November 2026. Get free Chicago quotes →

  • 2-car driveway, 400 sq ft, 4 in: $2,700–$6,400 ($4,250 typical)
  • Plain slab $7–$13/sq ft; 6 in with rebar $9–$16; stamped $11–$20
  • Patio 12 × 16 $1,300–$2,700; garage slab 24 × 24 $4,450–$9,150; steps $1,150–$3,450
  • Remove old concrete $2–$8/sq ft; ready-mix $135–$210 per cubic yard
  • Pump truck $565–$1,500; sealing $405–$980; crew labor $55–$115/hr

Prices verified November 2026 · Cross-referenced against 20+ American pricing sources · See methodology

Detailed pricing — Concrete cost in Chicago 2026

Installed prices with labor, 3,000–4,000 psi concrete, gravel base and forms unless the row says otherwise. Chicago metro, re-verified November 2026. Removal, pumping, decorative finishes and sealing are their own rows.

ServiceLowTypicalHigh
Concrete driveway, 2-car, 20 × 20 ft (400 sq ft), 4 in, plain finish, installedper 400 sq ft$2,700per 400 sq ft$4,250$6,400
Plain concrete slab, 4 in, broom finish, installedper sq ft$7per sq ft$10$13
Concrete slab, 6 in with rebar (trucks, RVs, shops), installedper sq ft$9per sq ft$12$16
Rebar or wire-mesh reinforcement, added to a slab, per 100 sq ftper 100 sq ft$115per 100 sq ft$200$325
Colored concrete (integral color), installedper sq ft$9per sq ft$11$14
Exposed aggregate finish, installedper sq ft$9per sq ft$12$15
Stamped concrete, installedper sq ft$11per sq ft$16$20
Stain an existing slab (acid or water-based), sealedper sq ft$3per sq ft$7$11
Polish an existing concrete slabper sq ft$3per sq ft$7$11
New slab poured and polishedper sq ft$10per sq ft$17$24
Resurface or overlay existing concrete (spray-on or microtopping)per sq ft$3per sq ft$6$9
Stamped or exposed-aggregate driveway, 2-car, 400 sq ftper 400 sq ft$4,400per 400 sq ft$6,400$8,000
Concrete walkway, 4 × 50 ft (200 sq ft), 4 in, plainper walkway$1,350per walkway$2,050$2,800
Concrete patio, 12 × 16 ft (192 sq ft), plain broom finishper patio$1,300per patio$1,950$2,700
Shed or small slab, 10 × 12 ft (120 sq ft), 4 inper slab$960per slab$1,350$1,850
Garage slab, 24 × 24 ft (576 sq ft), 4–6 in with rebarper slab$4,450per slab$6,400$9,150
Poured concrete steps, 3–4 risers, 4 ft wideper set$1,150per set$2,050$3,450
Concrete footings, 12 × 24 in with rebar, per linear ftper linear ft$23per linear ft$35$50
Slab-on-grade foundation (monolithic, thickened edge), per sq ftper sq ft$7per sq ft$11$15
Remove and haul away old concrete, 4 in unreinforcedper sq ft$2per sq ft$5$8
Seal a 400 sq ft driveway or patio (pro, one coat)per job$405per job$690$980
Ready-mix concrete, 3,000–4,000 psi, deliveredper cubic yard$135per cubic yard$170$210
Concrete pump truck (line or boom), per jobper job$565per job$960$1,500
Concrete crew labor, per worker per hourper hour$55per hour$85$115
concrete jobs in Chicago: what they costPer sq ft, low to high with the typical price marked. Every line is in the table above.
New slab poured and polished $17$10–$24
Stamped concrete, installed $16$11–$20
Concrete slab, 6 in with rebar (trucks, RVs, shops), installed $12$9–$16
Exposed aggregate finish, installed $12$9–$15
Colored concrete (integral color), installed $11$9–$14
Slab-on-grade foundation (monolithic, thickened edge), per sq ft $11$7–$15
Plain concrete slab, 4 in, broom finish, installed $10$7–$13
Stain an existing slab (acid or water-based), sealed $7$3–$11
Polish an existing concrete slab $7$3–$11
Resurface or overlay existing concrete (spray-on or microtopping) $6$3–$9
Remove and haul away old concrete, 4 in unreinforced $5$2–$8
Already got a quote?
Check it against these Chicago prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local concrete contractors in Chicago

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need poured?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 20+ American pricing sources · See methodology

Figures are for the Chicago metro area. Short-load fees apply to small pours anywhere; narrow access and old slabs to remove in River North & West Loop cost the most.

How concrete costs vary across Chicago

Concrete prices across Chicago

Same concrete, four price bands. Street parking, alleys and old slabs push River North & West Loop to the top, and jobs in Suburbs price near the city typical, with bigger driveways and easier truck access.

Concrete prices across ChicagoTypical range by part of the metro, per 400 sq ft. The line marks the Chicago typical.
River North & West Loop8–15% above the city average $2,900–$7,350per 400 sq ft
Wicker Park, Logan Square & PilsenStandard to 6% above $2,750–$6,800per 400 sq ft
South SideStandard pricing $2,700–$6,400per 400 sq ft
SuburbsStandard; best truck access, bigger pours $2,600–$6,550per 400 sq ft

River North & West Loop

8–15% above the city average
River North, West Loop, Fulton Market
2-car driveway
$2,900–$7,350 per 400 sq ft
Plain slab
$755–$1,500 / 100 sq ft of 4-in slab

Dense blocks of older housing. Expect demolition of the existing concrete on most jobs, narrow side yards that rule out truck access, and a permit for anything that touches the public sidewalk or apron.

Wicker Park, Logan Square & Pilsen

Standard to 6% above
Wicker Park, Logan Square, Humboldt Park, Pilsen
2-car driveway
$2,750–$6,800 per 400 sq ft
Plain slab
$715–$1,400 / 100 sq ft of 4-in slab

A remodel-heavy area with a lot of cracked, heaved slabs from the mid-1900s. Removal and disposal are on most quotes here, so ask for them as their own line before comparing prices.

South Side

Standard pricing
Bronzeville, Chatham, Hyde Park, South Shore
2-car driveway
$2,700–$6,400 per 400 sq ft
Plain slab
$700–$1,300 / 100 sq ft of 4-in slab

Residential streets with average pricing. Pouring the driveway and a walkway or patio in one visit is the easiest way to save here.

Suburbs

Standard; best truck access, bigger pours
Evanston, Oak Park, Cicero, Schaumburg
2-car driveway
$2,600–$6,550 per 400 sq ft
Plain slab
$680–$1,350 / 100 sq ft of 4-in slab

Plenty of 3-car driveways and large patios. Expect average rates plus more square feet per job, and ask whether the quote includes cutting control joints to the pattern of the original pour.

What you'll actually pay — job by job

Real-World Concrete Costs in Chicago

Here's what common concrete jobs cost in Chicago in 2026, labor, 4 in of 3,000–4,000 psi concrete, gravel base and forms included.

New 2-car driveway on a cleared lot — 2 to 3 days, 7 days before you park on it

$2,700–$4,250

Grade, 4 in of compacted gravel, forms, wire mesh, 5.5 yards of 4 in concrete, broom finish and control joints. Most Chicago driveways with truck access land here; a slope, a pump or 6 in with rebar pushes the bill toward $6,400.

Remove and replace a cracked 2-car driveway — 3 to 4 days

$3,500–$9,600

Breaking out and hauling 400 sq ft of old concrete runs $800–$3,200 (about 10 tons to the landfill at $90–$160 a ton), then the new pour at $2,700–$6,400. Reinforced old slabs cost more to cut up.

Stamped patio, 12 × 16 ft, one color and pattern — 1 to 2 days

$2,100–$3,850

The same patio in plain broom-finished concrete is $1,300–$2,700; stamping, color and sealer take it to $2,100–$3,850. Plan on resealing every 2–3 years at about $405–$980.

Garage slab, 24 × 24 ft, 4–6 in with rebar — 1 to 2 days

$4,450–$9,150

About 8 cubic yards of 4,000 psi concrete with a vapor barrier and a rebar grid, floated smooth. In Chicago that is $4,450–$9,150; a 6 in slab for a lift or a heavy truck prices at $9–$16 a square foot.

Shed slab or small parking pad, 10 × 12 ft — half a day

$960–$1,850

Small pours pay the most per square foot: $960–$1,850 for 120 sq ft works out to $8–$15 a square foot because the crew's setup and the ready-mix plant's short-load fee ($40–$110 a yard short) are spread over very little concrete.

How much does concrete cost in Chicago?

Between $2,700 and $6,400 for a 20 × 20 ft driveway, 4 in thick, and $4,250 is the price most Chicago homeowners pay. The concrete itself is the smaller part: about 5.5 cubic yards at $135–$210 each, or $745–$1,150. The rest is a crew's day or two — grading, gravel base, forms, steel, the pour, the finish and the control joints.

If the old driveway has to come out first, add $800–$3,200 for breaking, hauling and disposal, which takes a remove-and-replace job to $3,500–$9,600. Figures re-checked against 20 sources in November 2026.

Concrete prices in Chicago (2026): driveways, slabs and finishes

A 2-car driveway costs $2,700–$6,400, a plain slab $7–$13 a square foot, and stamped concrete $11–$20 a square foot.

Line on the quoteLowTypicalHigh
2-car driveway, 400 sq ft, 4 in, plain$2,700$4,250$6,400
Plain slab, 4 in, per sq ft$7$10$13
Stamped concrete, per sq ft$11$16$20
Patio, 12 × 16 ft, plain$1,300$1,950$2,700
Garage slab, 24 × 24 ft$4,450$6,400$9,150
Steps, 3–4 risers$1,150$2,050$3,450
Remove old concrete, per sq ft$2$5$8
Ready-mix, per cubic yard delivered$135$170$210

The concrete is the cheap part. The 5.5 yards in a Chicago driveway cost $745–$1,150 at $135–$210 a yard; the $2,700–$6,400 price is mostly a crew's time on grading, base, forms, steel and finishing.

What moves a concrete quote in Chicago:

  • What is being poured — plain 4 in flatwork is $7–$13 a square foot; 6 in with rebar $9–$16; stamped $11–$20.
  • What is there now — removing old concrete runs $2–$8 a square foot, $800–$3,200 for a 2-car driveway, before any new work.
  • Truck access — a pump truck for a back yard or a tight lot adds $565–$1,500; small pours pay a short-load fee of $40–$110 a yard.
  • Base and site — a slope, soft soil or a first-time driveway means more excavation and gravel ($1–$3 a square foot for a 4 in base).
  • Season — pours below 40°F need blankets and heat, and pours above 90°F need retarders and early starts; both add time and cost.

Ask every Chicago contractor the same six things: slab thickness, the psi of the mix, the base depth, rebar or mesh, whether removal and disposal are included, and who cuts the control joints. Compare those, not the headline price. Get a quote for your concrete job →

Concrete Cost in Chicago by Project Size

Quick answer

Shed slab, 10 × 12 ft: $960–$1,850. Patio, 12 × 16 ft: $1,300–$2,700. 2-car driveway, 20 × 20 ft: $2,700–$6,400. Garage slab, 24 × 24 ft: $4,450–$9,150. 3-car driveway, 24 × 36 ft: $6,050–$11,250, all plain 4 in concrete.

Worked example: a Chicago 2-car driveway, 400 sq ft, is about $4,250. Add a 4 × 50 ft walkway to the front door at $2,050 and a 12 × 16 patio at $1,950, poured the same day, and the job is roughly $8,250 for about 792 sq ft, which is why one combined quote costs less than three separate ones: the truck, the crew and the setup come once.

The rate falls as the pour grows. A 10 × 12 shed slab is $8–$15 a square foot, a 2-car driveway $6.75–$16, and a 3-car driveway ($6,050–$11,250 for 864 sq ft) $7–$13. Thickness moves it the other way: going from 4 in to 6 in with rebar takes a square foot from $7–$13 to $9–$16.

Chicago Concrete Costs by Finish and Type

Finish or typeCostBest for
Plain concrete, broom finish$7–$13 per sq ftDriveways, garage floors, shed pads and plain patios. The cheapest finish and the easiest to repair.
Colored concrete (integral color)$9–$14 per sq ftPigment mixed into the whole load, so chips and wear show the same color. Earth tones cost least; blues and greens most.
Exposed aggregate$9–$15 per sq ftSlip-resistant pool decks, walkways and driveways. The top of the slab is washed off to show the stone.
Stamped concrete$11–$20 per sq ftPatios, pool decks and front walks that should look like stone, slate or brick. Needs resealing every 2–3 years.
Stained concrete (existing slab)$3–$11 per sq ftGiving a sound existing patio or floor color without a new pour. Acid stain is mottled; water-based stain is more even.
Polished concrete (existing slab)$3–$11 per sq ftGarage, basement and interior floors ground to a shine. Not for driveways — polished surfaces are slippery when wet.
New slab, poured and polished$10–$24 per sq ftA finished interior floor in one project: the slab plus the grinding and polishing passes.
Resurfacing overlay$3–$9 per sq ftA sound slab with surface flaws. A thin cement overlay hides spalling and stains for a fraction of a tear-out.
Heavy-duty 6 in slab with rebar$9–$16 per sq ftRV pads, truck parking, workshops and anywhere a trailer or lift will sit. Half again as strong as a 4 in slab.
Cost by finish or type in ChicagoTypical range, per sq ft.
Plain concrete, broom finish $7–$13per sq ft
Colored concrete (integral color) $9–$14per sq ft
Exposed aggregate $9–$15per sq ft
Stamped concrete $11–$20per sq ft
Stained concrete (existing slab) $3–$11per sq ft
Polished concrete (existing slab) $3–$11per sq ft
New slab, poured and polished $10–$24per sq ft
Resurfacing overlay $3–$9per sq ft
Heavy-duty 6 in slab with rebar $9–$16per sq ft
Chicago tip: ask what psi the mix is. Exterior slabs should be at least 3,000 psi, and 3,500–4,000 psi with air entrainment where winters freeze. A cheaper 2,500 psi mix saves a few dollars a yard and spalls in a few winters.

Concrete price vs. what you pay — the Chicago driveway bill

Ready-mix concrete costs $135–$210 a cubic yard delivered in Chicago, and a cubic yard covers about 81 sq ft at 4 in, so a 400 sq ft driveway takes about 5.5 yards with waste and a thickened edge: $745–$1,150 of concrete inside a $2,700–$6,400 job. The difference pays for grading, a compacted gravel base, forms, steel, a crew of three or four for the pour, the finish, saw-cut joints and curing.

Labor is 40% to 55% of a flatwork bill, which is why prices differ by city while the concrete price barely moves. Where finishers earn more, a driveway costs more; the mix in the truck costs about the same in Chicago as it does two states away, give or take the plant's delivery radius.

What's included in a Chicago concrete quote (and what costs extra)

A standard driveway price covers grading, a compacted gravel base, forms, wire mesh or rebar, 4 in of concrete, a broom finish, control joints and curing. The headline price often leaves out:

  • Removing the old concrete — $2–$8 a square foot; $800–$3,200 for a 2-car driveway
  • Pump truck — $565–$1,500 when the mixer cannot reach the forms
  • Decorative finish — stamped $11–$20 and exposed aggregate $9–$15 a square foot, against $7–$13 plain
  • Sealing — $405–$980 for a 400 sq ft driveway, repeated every 2–3 years on decorative work

Ask for the thickness, psi, base depth and reinforcement in writing, and for proof of liability insurance.

What Affects Concrete Costs in Chicago

Size, thickness and reinforcement

Plain 4 in concrete is $7–$13 a square foot in Chicago; 6 in with rebar for trucks and RVs is $9–$16. Adding a rebar grid to a 4 in slab costs $115–$325 per 100 sq ft. Small pours cost more per square foot than big ones.

Finish

Broom finish is the base price. Integral color is $9–$14 a square foot, exposed aggregate $9–$15, stamped $11–$20. Stamped work also needs resealing every 2–3 years.

What has to come out first

Removing old concrete is $2–$8 a square foot, or $800–$3,200 for a 2-car driveway, including hauling and landfill fees. Reinforced or 6 in slabs cost more to break up.

Access and pumping

If the mixer truck cannot reach the forms, a line or boom pump adds $565–$1,500 to the job. Jobs under about 4 cubic yards pay a short-load fee of $40–$110 a yard at the plant.

Local rules

Illinois has no state license for concrete flatwork, so check city or county contractor registration, ask for proof of insurance, and expect a right-of-way permit for any apron, curb cut or sidewalk panel. Chicago licenses general contractors and requires a Public Way permit for sidewalk and apron work.

Labor rates in Chicago

Cement masons and concrete finishers in the Chicago-Naperville-Elgin metro earn a median $81,020 a year in federal wage data, about 42% above the US median. Labor is 40–55% of the bill, so Chicago prices land about 12% above the US typical of $3,800 for a 2-car driveway.

Season and weather

Concrete should not be poured on frozen ground or when the temperature will drop below 40°F in the next day without blankets and heaters, and hot days over 90°F need an early start and a retarder in the mix. In Chicago, the busy season books up weeks ahead, so get quotes early.

How to Save Money on Concrete in Chicago
  1. Pour everything in one visit.A driveway, walkway and patio poured the same day share one setup, one truck and no short-load fee. Separately, a 10 × 12 slab alone costs $960–$1,850 in Chicago — $8–$15 a square foot.
  2. Keep the truck close.A pour the mixer can reach from the street avoids a $565–$1,500 pump charge. Move cars, open gates and clear the path before the crew arrives.
  3. Choose the finish by where it shows.Stamp or color the front walk and the patio ($11–$20 a square foot) and leave the driveway and side yard in plain broom finish ($7–$13).
  4. Do the demolition and hauling yourself only if you can.Removal is $2–$8 a square foot, but 400 sq ft of 4 in concrete weighs about 10 tons and landfills charge $90–$160 a ton. A rented jackhammer and a dumpster often cost close to the contractor's price.
  5. Book the shoulder season.Late spring and early fall are the rush in Chicago. Contractors with gaps in late fall or late winter — where the climate allows a pour above 40°F — often sharpen their price.
  6. Get the spec in writing.Two quotes can differ by $1,550 on the same driveway because one is 3.5 in thick with no base and no steel. Make both say 4 in, the psi, the base depth and the reinforcement.
Concrete Cost in Chicago: What the Quote Should Include

Chicago contractors quote by the square foot or by the job. Before you pay a deposit, get these in writing:

  • The area in square feet with dimensions, and the slab thickness (4 in for cars, 5–6 in for trucks and RVs)
  • The concrete mix: psi (3,000 minimum outdoors; 3,500–4,000 with air entrainment where it freezes) and the number of cubic yards
  • Base: excavation depth, inches of compacted gravel, and a vapor barrier under any garage or interior slab
  • Reinforcement: wire mesh or rebar, bar size and spacing
  • Removal and disposal of existing concrete as its own line, with landfill fees
  • Finish (broom, stamped, exposed aggregate), color, sealer, and control joints — spacing and whether they are tooled or saw-cut
  • Truck access, pump charge or short-load fee, and any permit, sidewalk or curb-cut fees (and who pulls the permit)
  • Start date, pour date, cure time before you can park on it, payment stages, warranty and proof of insurance
Frequently asked questions — Concrete cost in Chicago
How much does a concrete driveway cost in Chicago?

$2,700–$6,400 for a 2-car, 20 × 20 ft driveway, 4 in thick with a plain finish, and $4,250 is typical. Removing the old driveway first adds $800–$3,200; a stamped finish takes it to $4,400–$8,000.

How much does concrete cost per square foot in Chicago?

$7–$13 a square foot for a plain 4 in slab, installed. Six inches with rebar is $9–$16, exposed aggregate $9–$15, and stamped concrete $11–$20. Small pours cost more per square foot than large ones.

How much is a cubic yard of concrete in Chicago?

$135–$210 a cubic yard for 3,000–4,000 psi ready-mix, delivered. Orders under a full truck pay a short-load fee of about $40–$110 a yard short, and a cubic yard covers about 81 sq ft at 4 in thick.

How much does a concrete patio cost in Chicago?

$1,300–$2,700 for a plain 12 × 16 ft patio. Stamped, the same patio is $2,100–$3,850; in exposed aggregate $1,750–$2,900.

How much does a concrete slab cost in Chicago?

$7–$13 a square foot for plain 4 in flatwork. A 10 × 12 shed slab is $960–$1,850, a 24 × 24 garage slab $4,450–$9,150, and a monolithic slab foundation $7–$15 a square foot.

How much does it cost to remove concrete in Chicago?

$2–$8 a square foot including hauling and landfill fees, so $800–$3,200 for a 400 sq ft driveway and $385–$1,550 for a 12 × 16 patio. Reinforced or thick slabs cost more.

Do I need a permit or a licensed contractor for concrete work in Illinois?

Illinois has no state license for concrete flatwork, so check city or county contractor registration, ask for proof of insurance, and expect a right-of-way permit for any apron, curb cut or sidewalk panel. Chicago licenses general contractors and requires a Public Way permit for sidewalk and apron work.

How thick should a concrete driveway be?

Four inches of 3,000–4,000 psi concrete over 4 in of compacted gravel is the standard for cars. Go to 5–6 in with rebar ($9–$16 a square foot) for trucks, RVs or a trailer. Thicker edges where the driveway meets the street help too.

How long before I can drive on new concrete?

Walk on it after 24–48 hours, park a car after 7–10 days, and keep heavy trucks and RVs off for 30 days. Concrete reaches its design strength at about 28 days; seal it after that.

What's included in a Chicago concrete quote?

Grading, gravel base, forms, mesh or rebar, the concrete, a broom finish, control joints and curing. Often extra: removal of old concrete ($800–$3,200 for a driveway), a pump truck ($565–$1,500), decorative finishes and sealing ($405–$980).

Prices verified November 2026 · Cross-referenced against 20+ American pricing sources · See methodology

Prices for the Chicago metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, dated city price pages, ready-mix and material prices and federal wage data. No contractor can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read our full methodology →

Get a fair concrete quote in Chicago

Local concrete contractors · Free quotes · No obligation, no spam.

Get quotes in Chicago →Max 2 concrete contractors will contact you
Get quotes in ChicagoMax 2 concrete contractors · free · no spam→