$2,400–$6,000 to pour a 2-car concrete driveway, 20 × 20 ft (400 sq ft) and 4 in thick, in 2026, and $3,800 is typical — about $6–$12 a square foot. Tearing out the old driveway first adds $800–$2,800, and a stamped or exposed-aggregate finish takes the same driveway to $4,000–$7,600.
2-car, 400 sq ft, 4 in plain: $2,400–$6,000, $3,800 typical ($6–$12 per sq ft)
Driveways price by the square foot at $6–$12 for plain 4 in concrete, so a 10 × 20 single is $1,200–$2,400, a 20 × 20 double $2,400–$6,000, a 24 × 24 double $3,450–$6,900 and a 24 × 36 triple $5,200–$10,350. The rate drops as the pour grows because the crew's setup, the forms and the truck's trip are spread over more concrete.
Four inches of 3,000–4,000 psi concrete over 4 in of compacted gravel carries cars. If a pickup with a trailer, a motorhome or a delivery truck will use it, 5–6 in with a rebar grid ($8–$15 a square foot) is worth the difference; most cost guides put 6 in at about 25% more than 4 in before reinforcement.
02
Finish
A broom finish is the base price and the best grip in rain and snow. Integral color is $8–$13 a square foot, exposed aggregate $8–$14, stamped $10–$19, so a stamped or exposed-aggregate 2-car driveway is $4,000–$7,600. Decorative finishes need sealing every 2–3 years at $350–$900, and a stamped driveway is harder to patch: a repair never quite matches the pattern.
03
Removal, replacement and resurfacing
Breaking out a 400 sq ft driveway and hauling it away costs $800–$2,800 — about 10 tons of rubble at $90–$160 a ton at the landfill plus the labor — so a remove-and-replace job is $3,200–$8,800. Reinforced slabs and anything over 4 in cost more to cut and lift.
If the slab is sound and only the surface is spalled or stained, a cement overlay at $3–$8 a square foot ($1,200–$3,200 for the driveway) buys ten or more years. Heaved or cracked-through panels cannot be overlaid; leveling (mudjacking or foam) at $3–$6 a square foot fixes a sunken panel if the base under it is still sound.
04
The apron, the sidewalk and the permit
The apron — the 8 to 15 ft where the driveway meets the street — sits in the public right-of-way in most cities, which means a permit ($50–$350), the city's own thickness spec (often 6 in) and sometimes a city inspector. A new apron runs $1,000–$2,800. Where a public sidewalk crosses the driveway, many cities make the homeowner replace cracked flags at the same time, at the sidewalk's own price.
05
Save money
Curing, and what the cheap quote leaves out
Walk on it after 24–48 hours, park a car after 7–10 days, keep heavy vehicles off for 30 days, and seal it after it has reached design strength at about 28 days. The quote should say 4 in (not 3.5), the psi, the inches of compacted base, wire mesh or rebar, control joints every 8–12 ft, and whether removal and the permit are in. A bid $1,400 under the others is usually missing two of those.
04 / Check a quoteFree · no sign-up
Got a price? See if it's fair
Concrete driveway, 2-car, 20 × 20 ft (400 sq ft), 4 in, plain finish, installed
Type the price you were quoted. We compare it with the US range of $2,400–$6,000 per 400 sq ft.
Get free quotes from up to 2 local concrete contractors
Free · No obligation · About a minute
1The job
2Budget
3Your details
C
Casey · LocalGoingRate
What do you need poured?
Tap one to start.
C
Casey · LocalGoingRate
What's your rough budget?
A ballpark is fine. It helps the concrete contractors who reply.
C
Casey · LocalGoingRate
Where should they text you?
Max 2 concrete contractors. No call floods.
100% free. No obligation.
🔒 Only your matched concrete contractors see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 concrete contractors about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
C
Casey · LocalGoingRate
Check your phone
05 / Questions5 answers
Concrete driveway cost: FAQ
How much does a 20 × 20 concrete driveway cost?
$2,400–$6,000 for 4 in plain concrete, about $3,800 typical. Add $800–$2,800 to remove an old driveway first; a stamped finish takes it to $4,000–$7,600.
How much does a concrete driveway cost per square foot?
$6–$12 per square foot for plain 4 in concrete installed, $8–$15 for 6 in with rebar, and $10–$19 stamped. Small driveways cost more per square foot than large ones.
Is concrete cheaper than asphalt or pavers?
Concrete at $6–$12 a square foot sits between asphalt ($4–$13) and pavers ($10–$30). Concrete lasts 30–40 years, asphalt 15–30 with sealcoating every few years, and pavers up to 75.
How long does a concrete driveway take?
Two to three days of work for a 2-car driveway — a day for demolition if needed, a day for grading, base and forms, and the pour and finish on the third — then 7–10 days before you park on it.
Do I need a permit for a new driveway?
Usually yes where the driveway meets a public street or sidewalk: the apron and curb cut are in the city's right-of-way. Expect $50–$350 and a city thickness spec for the apron. A driveway replaced on the same footprint on private land often needs none; ask the building department.
These are independent estimates built from public cost guides, dated city price pages, ready-mix and material prices and federal wage data. No contractor can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read the full methodology →