$6–$12 per square foot to pour a plain 4 in concrete slab in 2026, and $9 is typical — $2,400–$4,800 for a 20 × 20 ft slab. Six inches with rebar runs $8–$15 a square foot, a 24 × 24 garage slab $4,000–$8,600, and a monolithic slab foundation $6–$14 a square foot including the thickened footing.
Plain 4 in slab: $6–$12 per sq ft; 6 in with rebar $8–$15
The residential code's minimum for a slab is 3.5 in; 4 in is the practical standard for patios, sheds and driveways, and 5–6 in for garages, shops and anywhere a truck or a car lift will sit. Four inches of plain concrete is $6–$12 a square foot installed; 6 in with a rebar grid is $8–$15. The extra inches cost less than they look because the base, forms and finishing are the same — only the concrete and the steel grow.
Strength is separate from thickness. Interior slabs in mild climates can use 2,500 psi; exterior slabs need 3,000 psi in moderate-weathering regions and 3,500 psi where winters are severe, with air entrainment so freeze-thaw cycles do not spall the surface.
02
Base, vapor barrier and reinforcement
Concrete is only as good as what is under it. The code calls for a 4 in base of gravel, crushed stone or sand unless the soil drains well, which costs $1–$3 a square foot compacted, and a 6-mil polyethylene vapor retarder under interior slabs (R506.2.3) so ground moisture does not wick into a garage or living-space floor ($0.50–$1.00 a square foot). Wire mesh or a rebar grid adds $100–$300 per 100 sq ft and holds cracks tight when they come; it does not stop them, which is what control joints every 8–12 ft are for.
03
Compare
Slab or foundation?
A flatwork slab sits on the ground. A slab foundation carries a building, so its edges thicken into a footing that must reach 12 in below grade and below the local frost line — 0 in in Houston or Phoenix, about 36 in in Denver and New York, 42 in in Chicago and Minneapolis, 48 in in Boston. That is why a monolithic slab foundation costs $6–$14 a square foot ($9,000–$21,000 for a 1,500 sq ft home) while a garage slab on existing footings is $6–$14, and why separate footings run $20–$48 a linear foot. Anything that carries a structure needs a permit and an inspection of the footing before the pour.
04
Why small slabs cost more per square foot
A 10 × 12 shed slab is $850–$1,700 — $7–$14 a square foot — against $6–$14 for a garage slab. The crew's minimum, the forms and the short-load fee ($40–$110 a yard short) land on 1.5 yards of concrete. If you need a shed pad and a patio, pour them the same day.
05
DIY math for a small slab
A 10 × 12 × 4 in slab needs about 1.5 cubic yards: 67 80 lb bags at $6–$9 each, about $405–$610, plus gravel, lumber for forms, mesh and a day of tool rental at $222–$292. Against $850–$1,700 installed, the saving is real but the work is a long day for two people, and the mix must be placed and finished before it sets. Anything over about 2 yards, anything a car drives on, and anything with a footing is contractor work.
04 / Check a quoteFree · no sign-up
Got a price? See if it's fair
Plain concrete slab, 4 in, broom finish, installed
Type the price you were quoted. We compare it with the US range of $6–$12 per sq ft.
Get free quotes from up to 2 local concrete contractors
Free · No obligation · About a minute
1The job
2Budget
3Your details
C
Casey · LocalGoingRate
What do you need poured?
Tap one to start.
C
Casey · LocalGoingRate
What's your rough budget?
A ballpark is fine. It helps the concrete contractors who reply.
C
Casey · LocalGoingRate
Where should they text you?
Max 2 concrete contractors. No call floods.
100% free. No obligation.
🔒 Only your matched concrete contractors see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 concrete contractors about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
C
Casey · LocalGoingRate
Check your phone
05 / Questions5 answers
Concrete slab cost: FAQ
How much does a 20 × 20 concrete slab cost?
$2,400–$4,800 for 4 in plain concrete installed, at $6–$12 a square foot. With 6 in and rebar for a workshop or RV it is $3,200–$6,000.
How much does a concrete slab cost per square foot?
$6–$12 per square foot for 4 in plain, $8–$15 for 6 in with rebar. Add $1–$3 a square foot for a gravel base on a new site and $100–$300 per 100 sq ft for reinforcement if it is not in the price.
How much is a slab foundation for a house?
$6–$14 per square foot for a monolithic slab with its thickened footing, so about $9,000–$21,000 for a 1,500 sq ft home, before site work. Deep frost lines and poor soil push it up.
How much does a garage slab cost?
$4,000–$8,600 for a 24 × 24 ft two-car garage floor, 4–6 in with rebar and a vapor barrier. A 6 in floor for a lift or heavy truck prices at $8–$15 a square foot.
Does a concrete slab need rebar?
Not always. Wire mesh or fiber is enough for a 4 in patio or walkway on good soil; rebar is standard for 5–6 in slabs, garage floors, anything a truck uses and any slab that carries a structure. A grid adds $100–$300 per 100 sq ft.
These are independent estimates built from public cost guides, dated city price pages, ready-mix and material prices and federal wage data. No contractor can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read the full methodology →