Plain, stamped and polished concrete: cost per square foot compared
By Our research team · Last verified · Methodology
Plain broom finish
Driveways, garage floors, shed pads and plain patios. The cheapest finish and the easiest to repair.
Stamped
Patios, pool decks and front walks that should look like stone, slate or brick. Needs resealing every 2–3 years.
Poured and polished
A finished interior floor in one project: the slab plus the grinding and polishing passes.
Plain broom finish runs $6–$12 per sq ft, stamped runs $10–$19 per sq ft and poured and polished runs $9–$22 per sq ft in the US (November 2026). A 2-car concrete driveway costs $3,800 typical, asphalt about $2,800 for the same 400 sq ft, and pavers $6,800. See prices for your city ↓
Prices verified November 2026 · Cross-referenced against 20+ American pricing sources · See methodology
Plain, Stamped, Colored, Polished: Concrete Costs by Finish
Plain broom-finished concrete is $6–$12 a square foot installed. Color adds a little, exposed aggregate and stamping add a lot, and staining or polishing an existing slab is the cheap way to a new look. Prices include labor and materials.
| Finish or type | Cost | Best for |
|---|---|---|
| Plain concrete, broom finish | $6–$12 per sq ft | Driveways, garage floors, shed pads and plain patios. The cheapest finish and the easiest to repair. |
| Colored concrete (integral color) | $8–$13 per sq ft | Pigment mixed into the whole load, so chips and wear show the same color. Earth tones cost least; blues and greens most. |
| Exposed aggregate | $8–$14 per sq ft | Slip-resistant pool decks, walkways and driveways. The top of the slab is washed off to show the stone. |
| Stamped concrete | $10–$19 per sq ft | Patios, pool decks and front walks that should look like stone, slate or brick. Needs resealing every 2–3 years. |
| Stained concrete (existing slab) | $3–$10 per sq ft | Giving a sound existing patio or floor color without a new pour. Acid stain is mottled; water-based stain is more even. |
| Polished concrete (existing slab) | $3–$10 per sq ft | Garage, basement and interior floors ground to a shine. Not for driveways — polished surfaces are slippery when wet. |
| New slab, poured and polished | $9–$22 per sq ft | A finished interior floor in one project: the slab plus the grinding and polishing passes. |
| Resurfacing overlay | $3–$8 per sq ft | A sound slab with surface flaws. A thin cement overlay hides spalling and stains for a fraction of a tear-out. |
| Heavy-duty 6 in slab with rebar | $8–$15 per sq ft | RV pads, truck parking, workshops and anywhere a trailer or lift will sit. Half again as strong as a 4 in slab. |
Finish is the one choice that can double a bill: a 2-car driveway is $2,400–$6,000 plain and $4,000–$7,600 stamped. Decorative finishes also need resealing every 2–3 years, and a stamped or colored repair never quite matches, so most contractors suggest plain concrete where cars park and decorative work where people sit and walk.
Concrete vs Asphalt vs Pavers: What Each Driveway Costs and Why
A 2-car concrete driveway costs $3,800 typical, asphalt about $2,800 for the same 400 sq ft, and pavers $6,800. Same footprint, three very different lifespans.
| Factor | Poured concrete | Asphalt | Pavers |
|---|---|---|---|
| Typical price, 400 sq ft | $3,800 ($2,400–$6,000) | $2,800 ($1,600–$5,200) | $6,800 ($4,000–$12,000) |
| Per square foot | $6–$12 | $4–$13 | $10–$30 |
| Lifespan | 30–40 years | 15–30 years | Up to 75 years |
| Upkeep | Seal every 2–5 years ($350–$900); patch cracks | Sealcoat every 2–3 years; resurface at 10–15 | Re-sand joints; lift and reset settled pavers |
| Weather | Air-entrained mix and joints handle freeze-thaw; stains from oil | Softens in heat; flexes with frost; cheapest where winters are hard | Best for frost heave — pavers move and go back; weeds in joints |
| Time before use | 7–10 days | 2–3 days | Same day |
| Finish options | Broom, color, exposed aggregate, stamped ($10–$19/sq ft) | Black; stamped asphalt is rare | Hundreds of shapes and colors; borders |
| Watch out for | 3.5 in pours, no base, no joints, 2,500 psi mix | Thin lifts, no base, pouring in cold weather | Thin bedding, no edge restraint, polymeric sand skipped |
Concrete is the middle choice on price and the easiest to match to the house. If your lot heaves badly every winter, pavers forgive it; if you need the cheapest hard surface for a long rural drive, asphalt or gravel ($1–$3 a square foot) wins. Spread over its life, a $3,800 concrete driveway is about $110 a year.
Concrete vs stamped vs polished: prices in the largest US cities
Local installed prices for each option, November 2026. Open a city for its full price list and a free quote.
| City | Plain broom finish | Stamped | Poured and polished |
|---|---|---|---|
| New York, NY | $7–$13 per sq ft | $12–$21 per sq ft | $11–$24 per sq ft |
| Los Angeles, CA | $7–$13 per sq ft | $11–$20 per sq ft | $10–$24 per sq ft |
| Chicago, IL | $7–$13 per sq ft | $11–$20 per sq ft | $10–$24 per sq ft |
| Dallas, TX | $6–$12 per sq ft | $10–$19 per sq ft | $9–$22 per sq ft |
| Houston, TX | $6–$12 per sq ft | $10–$19 per sq ft | $9–$22 per sq ft |
| Washington, DC | $6–$12 per sq ft | $10–$19 per sq ft | $9–$22 per sq ft |
| Atlanta, GA | $6–$12 per sq ft | $10–$19 per sq ft | $9–$22 per sq ft |
| Philadelphia, PA | $6–$12 per sq ft | $10–$19 per sq ft | $9–$22 per sq ft |
| Miami, FL | $6–$12 per sq ft | $10–$19 per sq ft | $9–$22 per sq ft |
| Phoenix, AZ | $6–$12 per sq ft | $10–$19 per sq ft | $9–$22 per sq ft |
| Boston, MA | $7–$13 per sq ft | $11–$20 per sq ft | $10–$24 per sq ft |
| San Francisco, CA | $6–$12 per sq ft | $11–$20 per sq ft | $9–$22 per sq ft |
| Riverside, CA | $6–$12 per sq ft | $10–$19 per sq ft | $9–$22 per sq ft |
| Detroit, MI | $6–$12 per sq ft | $10–$19 per sq ft | $9–$22 per sq ft |
| Seattle, WA | $7–$13 per sq ft | $11–$20 per sq ft | $10–$24 per sq ft |
| Minneapolis, MN | $6–$12 per sq ft | $11–$20 per sq ft | $9–$22 per sq ft |
| San Diego, CA | $6–$12 per sq ft | $10–$19 per sq ft | $9–$22 per sq ft |
| Tampa, FL | $6–$11 per sq ft | $10–$18 per sq ft | $9–$20 per sq ft |
| Orange County, CA | $6–$12 per sq ft | $10–$19 per sq ft | $9–$22 per sq ft |
| Denver, CO | $6–$12 per sq ft | $10–$19 per sq ft | $9–$22 per sq ft |
| Oakland, CA | $6–$12 per sq ft | $10–$19 per sq ft | $9–$22 per sq ft |
| Charlotte, NC | $6–$11 per sq ft | $10–$18 per sq ft | $9–$20 per sq ft |
| Baltimore, MD | $6–$12 per sq ft | $10–$18 per sq ft | $9–$22 per sq ft |
| St. Louis, MO | $6–$12 per sq ft | $10–$19 per sq ft | $9–$22 per sq ft |
| Orlando, FL | $6–$11 per sq ft | $10–$18 per sq ft | $9–$20 per sq ft |
Get two real concrete quotes
Local licensed pros · free · max 2 will contact you · no spam.
- New York, NY →$2,750–$6,550 per 400 sq ft
- Los Angeles, CA →$2,700–$6,450 per 400 sq ft
- Chicago, IL →$2,700–$6,400 per 400 sq ft
- Dallas, TX →$2,350–$5,900 per 400 sq ft
- Houston, TX →$2,400–$6,000 per 400 sq ft
- Washington, DC →$2,450–$6,050 per 400 sq ft
- Atlanta, GA →$2,400–$6,000 per 400 sq ft
- Philadelphia, PA →$2,500–$6,150 per 400 sq ft
- Concrete cost: full US guide →