Ceramic vs porcelain vs natural stone: installed tile cost compared
By Our research team · Last verified · Methodology
Ceramic
Bathroom floors and walls on a budget; easy to cut, the cheapest tile to buy and to lay
Porcelain
Kitchens, bathrooms and entries — denser and harder than ceramic, so it takes wear and water without sealing
Natural stone
Statement floors and shower walls; needs sealing and a setter who works stone every week
Ceramic runs $8–$20 per sq ft installed, porcelain runs $10–$25 per sq ft installed and natural stone runs $18–$50 per sq ft installed in the US (November 2026). Ceramic is the cheapest to buy and set ($8–$20 per sq ft installed), porcelain the best all-rounder ($10–$25 per sq ft), and natural stone the priciest to buy, set and keep ($18–$50 per sq ft). See prices for your city ↓
Prices verified November 2026 · Cross-referenced against 77+ American pricing sources · See methodology
Tile types compared: installed cost per square foot and where each fits
Standard porcelain lands at $10–$25 per sq ft installed, natural stone $18–$50 per sq ft and mosaics $18–$60 per sq ft. The tile is a third of the price; the labor to set it is the rest.
| Tile type | Cost | Best for |
|---|---|---|
| Ceramic tile (basic glazed) | $8–$20 per sq ft installed | Bathroom floors and walls on a budget; easy to cut, the cheapest tile to buy and to lay |
| Porcelain tile (standard 12×12 or 12×24) | $10–$25 per sq ft installed | Kitchens, bathrooms and entries — denser and harder than ceramic, so it takes wear and water without sealing |
| Large-format porcelain (24×24, 24×48) | $13–$30 per sq ft installed | Open living areas and big showers; fewer grout lines, but the floor must be flat and the labor rate is higher |
| Natural stone (marble, travertine, limestone) | $18–$50 per sq ft installed | Statement floors and shower walls; needs sealing and a setter who works stone every week |
| Mosaic and feature tile | $18–$60 per sq ft installed | Shower floors, niches and accent strips — small pieces, slow to set, so labor per foot is the highest |
| Subway tile (ceramic backsplash and wall tile) | $12–$30 per sq ft installed | Kitchen backsplashes and tub surrounds; cheap tile, moderate labor |
| Outdoor slip-resistant porcelain pavers | $13–$35 per sq ft installed | Patios and pool decks over a concrete slab; frost-proof and textured for wet feet |
| Heated floor add-on (electric mat under the tile) | $8–$20 per sq ft added | Bathroom floors in cold climates — add $140–$350 for the thermostat hookup |
Whatever you choose, make sure floor tile in a bathroom carries a wet DCOF traction rating of at least 0.42 on its spec sheet, and that anything outdoors is frost-proof porcelain or sealed stone. Ask for the setter's liability insurance and a written price before work starts.
Ceramic vs porcelain vs natural stone
Ceramic is the cheapest to buy and set ($8–$20 per sq ft installed), porcelain the best all-rounder ($10–$25 per sq ft), and natural stone the priciest to buy, set and keep ($18–$50 per sq ft).
| Factor | Ceramic | Porcelain | Natural stone |
|---|---|---|---|
| Tile cost | $1–$4 per sq ft | $3–$9 per sq ft | $6–$25 per sq ft |
| Labor to set | $5–$14 per sq ft | $5–$14 per sq ft standard; $9–$16 per sq ft large-format | $10–$22 per sq ft |
| Installed, per sq ft | $8–$20 per sq ft | $10–$25 per sq ft | $18–$50 per sq ft |
| Water and frost | Glazed face is water-resistant; the body absorbs water, so indoors only | Dense body absorbs almost nothing — fine in showers and, if frost-rated, outdoors | Porous; must be sealed, and only some stones survive freeze-thaw |
| Wear | Softer; chips show the red or white body underneath | Hardest of the three; through-body colors hide chips | Marble scratches and etches; travertine pits; granite wears well |
| Upkeep | Seal the grout, not the tile | Seal the grout, not the tile | Seal the stone every 1–3 years ($1–$3 per sq ft) plus the grout |
| Best for | Walls, backsplashes, light-traffic bathroom floors | Kitchens, bathrooms, entries, showers, patios | Statement floors and shower walls where upkeep is accepted |
Marble-look and wood-look porcelain give most of the look of stone or wood at porcelain prices, with none of the sealing.
Ceramic vs porcelain vs stone tile: prices in the largest US cities
Local installed prices for each option, November 2026. Open a city for its full price list and a free quote.
| City | Ceramic | Porcelain | Natural stone |
|---|---|---|---|
| New York, NY | $10–$23 per sq ft installed | $12–$28 per sq ft installed | $21–$55 per sq ft installed |
| Los Angeles, CA | $9–$22 per sq ft installed | $11–$27 per sq ft installed | $20–$50 per sq ft installed |
| Chicago, IL | $9–$23 per sq ft installed | $11–$28 per sq ft installed | $20–$55 per sq ft installed |
| Dallas, TX | $9–$21 per sq ft installed | $11–$26 per sq ft installed | $20–$50 per sq ft installed |
| Houston, TX | $8–$20 per sq ft installed | $10–$25 per sq ft installed | $18–$50 per sq ft installed |
| Washington, DC | $8–$20 per sq ft installed | $10–$25 per sq ft installed | $18–$50 per sq ft installed |
| Atlanta, GA | $8–$20 per sq ft installed | $10–$25 per sq ft installed | $18–$50 per sq ft installed |
| Philadelphia, PA | $9–$23 per sq ft installed | $11–$28 per sq ft installed | $20–$55 per sq ft installed |
| Miami, FL | $8–$20 per sq ft installed | $10–$25 per sq ft installed | $18–$50 per sq ft installed |
| Phoenix, AZ | $9–$21 per sq ft installed | $11–$26 per sq ft installed | $20–$50 per sq ft installed |
| Boston, MA | $10–$24 per sq ft installed | $12–$29 per sq ft installed | $22–$55 per sq ft installed |
| San Francisco, CA | $9–$22 per sq ft installed | $11–$27 per sq ft installed | $19–$50 per sq ft installed |
| Riverside, CA | $8–$20 per sq ft installed | $10–$25 per sq ft installed | $18–$50 per sq ft installed |
| Detroit, MI | $8–$20 per sq ft installed | $10–$25 per sq ft installed | $18–$50 per sq ft installed |
| Seattle, WA | $9–$23 per sq ft installed | $11–$28 per sq ft installed | $20–$55 per sq ft installed |
| Minneapolis, MN | $9–$21 per sq ft installed | $11–$26 per sq ft installed | $20–$50 per sq ft installed |
| San Diego, CA | $9–$21 per sq ft installed | $11–$26 per sq ft installed | $20–$50 per sq ft installed |
| Tampa, FL | $8–$20 per sq ft installed | $10–$25 per sq ft installed | $18–$50 per sq ft installed |
| Orange County, CA | $9–$21 per sq ft installed | $11–$26 per sq ft installed | $20–$50 per sq ft installed |
| Denver, CO | $9–$21 per sq ft installed | $11–$26 per sq ft installed | $19–$50 per sq ft installed |
| Oakland, CA | $9–$22 per sq ft installed | $11–$27 per sq ft installed | $19–$50 per sq ft installed |
| Charlotte, NC | $8–$20 per sq ft installed | $10–$25 per sq ft installed | $18–$50 per sq ft installed |
| Baltimore, MD | $8–$19 per sq ft installed | $10–$24 per sq ft installed | $17–$50 per sq ft installed |
| St. Louis, MO | $9–$22 per sq ft installed | $11–$27 per sq ft installed | $19–$50 per sq ft installed |
| Orlando, FL | $8–$20 per sq ft installed | $10–$25 per sq ft installed | $18–$50 per sq ft installed |
Get two real tile installation quotes
Local licensed pros · free · max 2 will contact you · no spam.
- New York, NY →$1,150–$2,800 per 100 sq ft
- Los Angeles, CA →$1,050–$2,650 per 100 sq ft
- Chicago, IL →$1,100–$2,800 per 100 sq ft
- Dallas, TX →$1,050–$2,600 per 100 sq ft
- Houston, TX →$985–$2,450 per 100 sq ft
- Washington, DC →$980–$2,450 per 100 sq ft
- Atlanta, GA →$975–$2,450 per 100 sq ft
- Philadelphia, PA →$1,100–$2,750 per 100 sq ft
- Tile installation cost: full US guide →