$1,500–$5,000 to tile a shower's walls and floor — about 100 square feet — with a waterproof membrane, typically $2,700. Retiling the walls alone is $800–$2,600, a new tiled pan $800–$3,000, and a recessed niche or bench adds $200–$500.
Tile a shower, walls + floor: $1,500–$5,000, $2,700 typical
Walls only $800–$2,600; shower floor only $500–$1,000
Tiled shower pan $800–$3,000; waterproofing $3–$8 per sq ft
Labor: wall tile $8–$20 per sq ft; mosaic floor $12–$30 per sq ft
Niche or bench $200–$500; old tile removal $2–$7 per sq ft
Prices verified November 2026 · Cross-referenced against 77+ American pricing sources · See methodology
01 / PricesUSA · November 2026
Shower tile costs (2026)
The common job — walls and floor retiled over a new membrane — is $1,500–$5,000. The pan and the waterproofing are what separate a shower from a plain wall.
Shower tile costs (2026)Per shower, low to high with the typical price marked.
Shower with a recessed niche or bench$3,050$1,700–$5,500
Tile a shower, walls and floor, about 100 sq ft (tile + labor)$2,700$1,500–$5,000
Retile shower walls only$1,500$800–$2,600
Regrout a shower instead of retiling$1,000$500–$1,800
Retile the shower floor only$750$500–$1,000
$0$2,000$4,000$6,000
Job
Low
Typical
High
Tile a shower, walls and floor, about 100 sq ft (tile + labor)per shower
$1,500
$2,700
$5,000
Shower with a recessed niche or benchper shower
$1,700
$3,050
$5,500
Retile shower walls onlyper shower
$800
$1,500
$2,600
Retile the shower floor onlyper shower
$500
$750
$1,000
Tiled shower pan, sloped and waterproofed (installed)per pan
$800
$1,500
$3,000
Waterproofing membrane (installed)per sq ft
$3
$5
$8
Wall tile, standard (labor only)per sq ft
$8
$12
$20
Mosaic shower floor (labor only)per sq ft
$12
$18
$30
Recessed niche, shelf or bench (add-on)each
$200
$350
$500
Old shower tile removal and disposalper sq ft
$2
$4
$7
Regrout a shower instead of retilingper shower
$500
$1,000
$1,800
Heated floor mat outside the shower (add-on)per sq ft
$8
$12
$20
US prices, November 2026. Low is a simple job in a low-cost area; high is a bigger job or a high-cost city.
02 / By city195 cities priced
Does shower tile cost change by city?
Yes. The same job costs more where labor and rent cost more. Here's how tile installation prices in the biggest US metros compare with the US typical of $1600.
Tile installation prices in the 12 biggest US metrosEach city's typical tile installation price against the US typical of $1,600.
Size, tile and the pan. A 32×32 stall has about 60 square feet of wall; a 60×36 shower with its floor and a bench pushes past 100. Standard ceramic or porcelain wall tile sets at $8–$20 per sq ft in labor; a mosaic floor at $12–$30 per sq ft; marble or other stone at $10–$22 per sq ft plus sealing. Underneath, a sloped, waterproofed pan ($800–$3,000 tiled) is the most skilled part of the job and the part that fails when it is rushed.
02
Waterproofing: the line you never cut
Tile and grout are not waterproof. Every shower needs a membrane behind the tile — a sheet system such as Schluter Kerdi (about $241–$267 for a 108 sq ft roll at retail) or a liquid such as RedGard (about $180 for a 3.5-gallon pail) — installed over cement board or a foam board, never over paper-faced drywall. Installed, waterproofing runs $3–$8 per sq ft, or roughly $375–$1,000 on a typical shower. A quote with no waterproofing line is a quote for a leak.
03
What's included and what's extra
A standard quote covers demolition of the old tile ($2–$7 per sq ft), new backer board, the membrane, tile, grout, caulk at the changes of plane and cleanup. Usually extra: a new valve or moving the drain (a plumber, often with a permit), a glass door, the niche or bench ($200–$500), a marble threshold ($30–$75) and any rot found in the framing once the old walls come off.
04
Save money
How to save on a shower
Keep the plumbing where it is, choose a standard-size porcelain for the walls ($3–$9 per sq ft) and spend on the floor mosaic where it shows. Retile the walls only ($800–$2,600) if the pan is sound and dry, or regrout ($500–$1,800) if the tile is fine and only the grout has failed. Buy the tile yourself, but let the setter choose the membrane and thinset.
05
Watch out
Red flags, permits and insurance
Walk away from any setter who will tile over the old tile in a shower, skip the membrane, use mastic instead of thinset in a wet area, or grout the corners instead of caulking them. Replacing tile like for like rarely needs a permit, but moving the valve, the drain or the shower walls usually needs a plumbing or building permit in most US cities — ask your building department. General information, not legal advice.
Don't count on insurance to pay for a bad shower. A standard homeowners policy covers sudden, accidental water damage — a burst pipe, a frozen line — but it excludes damage from lack of maintenance, and a pan that has been seeping into the subfloor for years is exactly that. The membrane is the insurance.
04 / Check a quoteFree · no sign-up
Got a price? See if it's fair
Tile a shower, walls and floor, about 100 sq ft (tile + labor)
Type the price you were quoted. We compare it with the US range of $1,500–$5,000 per shower.
A ballpark is fine. It helps the tile setters who reply.
C
Casey · LocalGoingRate
Where should they text you?
Max 2 tile setters. No call floods.
100% free. No obligation.
🔒 Only your matched tile setters see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 tile setters about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
C
Casey · LocalGoingRate
Check your phone
05 / Questions5 answers
Shower tile cost: FAQ
How much does it cost to retile a shower?
$1,500–$5,000 for walls and floor with a new membrane, about $2,700 typical. Walls only is $800–$2,600 if the pan is sound.
How much is a tiled shower floor or pan?
Retiling just the floor is $500–$1,000. A new sloped, waterproofed and tiled pan is $800–$3,000 — the most skilled part of the job.
How much does shower waterproofing cost?
$3–$8 per sq ft installed, or about $375–$1,000 for a typical shower. A sheet membrane roll is roughly $241–$267 at retail and a 3.5-gallon pail of liquid membrane about $180; the rest is labor.
Can I just regrout instead of retiling?
If the tile is sound and the leak is only through failed grout, yes — regrouting a shower runs $500–$1,800 against $1,500–$5,000 to retile. If tiles are loose or the pan is wet behind the wall, regrouting hides the problem.
How long does it take to tile a shower?
Two to three days for a pro: one for demolition, backer and membrane, one to set tile, one to grout and caulk. Add a day or two if the pan is rebuilt or the plumbing moves.
These are independent estimates built from published cost guides, retailer tile and product prices, dated city cost pages, federal wage data and tile-industry trade data. No tile setter can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read the full methodology →