Fence Cost USA 2026
By Our research team · Last verified · 12 min read · Methodology
Fence installation costs in the US
What most homeowners pay for fence job, labor, materials and posts set in concrete included. Pick your city for local prices.
How we get this data- Typical
- $4,200
- Low end
- $1,500
- High end
- $9,000
Installing 150 linear ft of 6 ft wood privacy fence costs $2,700–$6,750 in the US in 2026, pressure-treated pine with posts set in concrete, and most homeowners pay about $4,200 — $18–$45 a linear foot. Vinyl runs $25–$60 a foot, chain link $12–$30, aluminum $25–$60 and wrought iron $30–$100; a walk gate adds $200–$700.
$2,700–$6,750 to install 150 ft of 6 ft wood privacy fence in the US — pressure-treated pine, posts in concrete — $4,200 typical, or $18–$45 a linear foot. Vinyl runs $25–$60 a foot, chain link $12–$30, and a walk gate $200–$700. Pick your city ↓
- 150 ft of 6 ft wood privacy fence: $2,700–$6,750 ($4,200 typical)
- Per linear ft installed: wood $18–$45; vinyl $25–$60; chain link $12–$30
- Aluminum $25–$60/ft; wrought iron $30–$100/ft; walk gate $200–$700
- Old fence removal $3–$10/ft; post replacement $125–$400; permit $50–$500 where needed
- Pick a city below for local prices across 195 US metros
Prices below come from national cost guides, dated city price pages and fence company price lists, big-box lumber and panel prices, federal wage data for fence erectors, city permit schedules and state pool and fence laws, applied across 195 US metros and re-checked in November 2026. Installed prices include labor, materials and posts in concrete; gates, tear-out, permits and staining are their own rows. Pick your city for local pricing.
A short, straight run of pressure-treated fence on flat ground in a cheap market can come in near $1,500 for 150 ft; cedar or board-on-board on a rocky, sloped lot with an old fence to haul away in a top-cost city can reach $9,000. Materials are about half of any wood fence bill: roughly $1,800–$4,200 of pickets, posts and concrete for 150 ft. The rest is two or three days of a crew's digging, setting and nailing. The highest typical price on our city pages is Honolulu ($4,750); the lowest is Winston-Salem ($3,800).
Prices verified November 2026 · Cross-referenced against 17+ American pricing sources · See methodology
Fence installation cost by city
Typical fence installation ranges, re-verified November 2026 across 17+ sources. Largest cities first.
Among the biggest metros, San Francisco is the priciest at $4,550 and Houston the least at $3,900.
Half of the 195 metros we price sit between $3,950 and $4,250.
| City | Typical range |
|---|---|
| New York, NY | $2,850–$7,000 per 150 ft |
| Los Angeles, CA | $2,850–$6,950 per 150 ft |
| Chicago, IL | $2,800–$6,900 per 150 ft |
| Dallas, TX | $2,600–$6,300 per 150 ft |
| Houston, TX | $2,600–$6,300 per 150 ft |
| Washington, DC | $2,800–$6,900 per 150 ft |
| Atlanta, GA | $2,700–$6,750 per 150 ft |
| Philadelphia, PA | $2,900–$7,050 per 150 ft |
| Miami, FL | $2,850–$7,000 per 150 ft |
| Phoenix, AZ | $2,700–$6,700 per 150 ft |
| Boston, MA | $2,800–$6,850 per 150 ft |
| San Francisco, CA | $2,950–$7,100 per 150 ft |
| Riverside, CA | $2,800–$6,900 per 150 ft |
| Detroit, MI | $2,700–$6,750 per 150 ft |
| Seattle, WA | $2,900–$7,000 per 150 ft |
| Minneapolis, MN | $2,850–$7,000 per 150 ft |
| San Diego, CA | $2,850–$6,950 per 150 ft |
| Tampa, FL | $2,700–$6,650 per 150 ft |
| Orange County, CA | $2,750–$6,800 per 150 ft |
| Denver, CO | $2,700–$6,750 per 150 ft |
| Oakland, CA | $2,850–$7,000 per 150 ft |
| Charlotte, NC | $2,600–$6,350 per 150 ft |
| Baltimore, MD | $2,700–$6,750 per 150 ft |
| St. Louis, MO | $2,650–$6,600 per 150 ft |
| Orlando, FL | $2,600–$6,300 per 150 ft |
| Brooklyn, NY | $2,800–$6,900 per 150 ft |
| San Antonio, TX | $2,550–$6,200 per 150 ft |
| Fort Worth, TX | $2,550–$6,200 per 150 ft |
| Austin, TX | $2,600–$6,300 per 150 ft |
| Portland, OR | $2,650–$6,600 per 150 ft |
| Sacramento, CA | $2,700–$6,750 per 150 ft |
| Pittsburgh, PA | $2,850–$7,000 per 150 ft |
| Las Vegas, NV | $2,700–$6,700 per 150 ft |
| Cincinnati, OH | $2,700–$6,750 per 150 ft |
| Kansas City, MO | $2,650–$6,600 per 150 ft |
| Columbus, OH | $2,700–$6,750 per 150 ft |
| Newark, NJ | $2,750–$6,850 per 150 ft |
| Nashville, TN | $2,750–$6,800 per 150 ft |
| Indianapolis, IN | $2,700–$6,750 per 150 ft |
| Cleveland, OH | $2,700–$6,750 per 150 ft |
| San Jose, CA | $2,850–$7,000 per 150 ft |
| Fort Lauderdale, FL | $2,800–$6,900 per 150 ft |
| Virginia Beach, VA | $2,600–$6,350 per 150 ft |
| Jacksonville, FL | $2,650–$6,600 per 150 ft |
| Providence, RI | $2,650–$6,600 per 150 ft |
| Milwaukee, WI | $2,750–$6,850 per 150 ft |
| Raleigh, NC | $2,600–$6,450 per 150 ft |
| Oklahoma City, OK | $2,600–$6,250 per 150 ft |
| West Palm Beach, FL | $2,800–$6,850 per 150 ft |
| New Orleans, LA | $2,750–$6,850 per 150 ft |
| Memphis, TN | $2,650–$6,600 per 150 ft |
| Richmond, VA | $2,600–$6,400 per 150 ft |
| Louisville, KY | $2,700–$6,700 per 150 ft |
| Salt Lake City, UT | $2,700–$6,800 per 150 ft |
| Hartford, CT | $2,750–$6,850 per 150 ft |
| Birmingham, AL | $2,600–$6,350 per 150 ft |
| Buffalo, NY | $2,700–$6,700 per 150 ft |
| Rochester, NY | $2,700–$6,700 per 150 ft |
| Grand Rapids, MI | $2,650–$6,600 per 150 ft |
| Tucson, AZ | $2,650–$6,600 per 150 ft |
| Honolulu, HI | $3,050–$7,250 per 150 ft |
| Tulsa, OK | $2,600–$6,250 per 150 ft |
| Fresno, CA | $2,800–$6,900 per 150 ft |
| Omaha, NE | $2,700–$6,750 per 150 ft |
| St. Petersburg, FL | $2,650–$6,600 per 150 ft |
| Worcester, MA | $2,650–$6,650 per 150 ft |
| Bridgeport, CT | $2,750–$6,850 per 150 ft |
| Greenville, SC | $2,550–$6,200 per 150 ft |
| Tacoma, WA | $2,800–$6,900 per 150 ft |
| Albuquerque, NM | $2,650–$6,550 per 150 ft |
| Bakersfield, CA | $2,750–$6,850 per 150 ft |
| Albany, NY | $2,700–$6,700 per 150 ft |
| Knoxville, TN | $2,650–$6,550 per 150 ft |
| McAllen, TX | $2,550–$6,150 per 150 ft |
| Baton Rouge, LA | $2,750–$6,800 per 150 ft |
| El Paso, TX | $2,550–$6,150 per 150 ft |
| Sarasota, FL | $2,650–$6,650 per 150 ft |
| New Haven, CT | $2,750–$6,800 per 150 ft |
| Columbia, SC | $2,600–$6,250 per 150 ft |
| Oxnard, CA | $2,800–$6,850 per 150 ft |
| Charleston, SC | $2,600–$6,250 per 150 ft |
| Dayton, OH | $2,650–$6,600 per 150 ft |
| Boise, ID | $2,650–$6,600 per 150 ft |
| Fort Myers, FL | $2,650–$6,500 per 150 ft |
| Stockton, CA | $2,800–$6,900 per 150 ft |
| Greensboro, NC | $2,600–$6,250 per 150 ft |
| Lakeland, FL | $2,650–$6,500 per 150 ft |
| Colorado Springs, CO | $2,650–$6,650 per 150 ft |
| Little Rock, AR | $2,650–$6,500 per 150 ft |
| Des Moines, IA | $2,700–$6,800 per 150 ft |
| Wilmington, DE | $2,850–$6,950 per 150 ft |
| Akron, OH | $2,650–$6,600 per 150 ft |
| Daytona Beach, FL | $2,650–$6,500 per 150 ft |
| Provo, UT | $2,650–$6,650 per 150 ft |
| Springfield, MA | $2,650–$6,650 per 150 ft |
| Ogden, UT | $2,650–$6,600 per 150 ft |
| Winston-Salem, NC | $2,550–$6,150 per 150 ft |
| Madison, WI | $2,700–$6,750 per 150 ft |
| Syracuse, NY | $2,650–$6,600 per 150 ft |
| Durham, NC | $2,600–$6,300 per 150 ft |
| Wichita, KS | $2,650–$6,600 per 150 ft |
| Toledo, OH | $2,650–$6,600 per 150 ft |
| Augusta, GA | $2,550–$6,150 per 150 ft |
| Palm Bay, FL | $2,650–$6,500 per 150 ft |
| Jackson, MS | $2,550–$6,200 per 150 ft |
| Harrisburg, PA | $2,800–$6,900 per 150 ft |
| Spokane, WA | $2,700–$6,650 per 150 ft |
| Chattanooga, TN | $2,600–$6,250 per 150 ft |
| Fayetteville, AR | $2,650–$6,550 per 150 ft |
| Scranton, PA | $2,800–$6,900 per 150 ft |
| Portland, ME | $2,700–$6,700 per 150 ft |
| Modesto, CA | $2,750–$6,850 per 150 ft |
| Lansing, MI | $2,650–$6,550 per 150 ft |
| Youngstown, OH | $2,650–$6,600 per 150 ft |
| Fayetteville, NC | $2,600–$6,250 per 150 ft |
| Lexington, KY | $2,650–$6,550 per 150 ft |
| Huntsville, AL | $2,600–$6,250 per 150 ft |
| Pensacola, FL | $2,650–$6,500 per 150 ft |
| Myrtle Beach, SC | $2,550–$6,200 per 150 ft |
| Mesa, AZ | $2,650–$6,600 per 150 ft |
| Reno, NV | $2,650–$6,650 per 150 ft |
| Springfield, MO | $2,600–$6,400 per 150 ft |
| Santa Rosa, CA | $2,750–$6,850 per 150 ft |
| Asheville, NC | $2,600–$6,250 per 150 ft |
| Killeen, TX | $2,550–$6,150 per 150 ft |
| Visalia, CA | $2,750–$6,850 per 150 ft |
| Lafayette, LA | $2,700–$6,750 per 150 ft |
| Long Beach, CA | $2,750–$6,800 per 150 ft |
| Santa Barbara, CA | $2,750–$6,850 per 150 ft |
| Salinas, CA | $2,750–$6,850 per 150 ft |
| Mobile, AL | $2,600–$6,250 per 150 ft |
| Corpus Christi, TX | $2,550–$6,150 per 150 ft |
| Manchester, NH | $2,700–$6,750 per 150 ft |
| Salem, OR | $2,650–$6,500 per 150 ft |
| Fort Wayne, IN | $2,650–$6,550 per 150 ft |
| Brownsville, TX | $2,550–$6,150 per 150 ft |
| Gulfport, MS | $2,550–$6,200 per 150 ft |
| Appleton, WI | $2,700–$6,750 per 150 ft |
| Savannah, GA | $2,550–$6,150 per 150 ft |
| Anchorage, AK | $2,900–$7,050 per 150 ft |
| Beaumont, TX | $2,550–$6,150 per 150 ft |
| Flint, MI | $2,650–$6,550 per 150 ft |
| Peoria, IL | $2,700–$6,700 per 150 ft |
| Canton, OH | $2,650–$6,600 per 150 ft |
| Arlington, TX | $2,550–$6,200 per 150 ft |
| Shreveport, LA | $2,700–$6,750 per 150 ft |
| Tallahassee, FL | $2,650–$6,500 per 150 ft |
| Montgomery, AL | $2,600–$6,250 per 150 ft |
| Trenton, NJ | $2,800–$6,850 per 150 ft |
| Eugene, OR | $2,650–$6,500 per 150 ft |
| Davenport, IA | $2,700–$6,800 per 150 ft |
| Ann Arbor, MI | $2,650–$6,550 per 150 ft |
| Fort Collins, CO | $2,650–$6,650 per 150 ft |
| Gainesville, FL | $2,650–$6,500 per 150 ft |
| Lincoln, NE | $2,700–$6,700 per 150 ft |
| Rockford, IL | $2,700–$6,700 per 150 ft |
| Lubbock, TX | $2,550–$6,150 per 150 ft |
| Columbus, GA | $2,550–$6,150 per 150 ft |
| Boulder, CO | $2,650–$6,650 per 150 ft |
| Green Bay, WI | $2,700–$6,750 per 150 ft |
| Evansville, IN | $2,650–$6,600 per 150 ft |
| South Bend, IN | $2,650–$6,600 per 150 ft |
| Roanoke, VA | $2,600–$6,300 per 150 ft |
| Sioux Falls, SD | $2,700–$6,750 per 150 ft |
| Wilmington, NC | $2,600–$6,250 per 150 ft |
| Stamford, CT | $2,750–$6,850 per 150 ft |
| Waco, TX | $2,550–$6,150 per 150 ft |
| Jersey City, NJ | $2,750–$6,850 per 150 ft |
| Duluth, MN | $2,800–$6,900 per 150 ft |
| Laredo, TX | $2,550–$6,150 per 150 ft |
| Cedar Rapids, IA | $2,700–$6,800 per 150 ft |
| Tuscaloosa, AL | $2,600–$6,250 per 150 ft |
| Amarillo, TX | $2,550–$6,150 per 150 ft |
| Erie, PA | $2,800–$6,900 per 150 ft |
| Atlantic City, NJ | $2,750–$6,800 per 150 ft |
| Fargo, ND | $2,700–$6,650 per 150 ft |
| Charleston, WV | $2,600–$6,350 per 150 ft |
| Norfolk, VA | $2,600–$6,350 per 150 ft |
| Macon, GA | $2,550–$6,150 per 150 ft |
| Champaign, IL | $2,700–$6,700 per 150 ft |
| Burlington, VT | $2,700–$6,700 per 150 ft |
| Topeka, KS | $2,650–$6,600 per 150 ft |
| Rochester, MN | $2,800–$6,900 per 150 ft |
| Athens, GA | $2,550–$6,150 per 150 ft |
| Las Cruces, NM | $2,650–$6,450 per 150 ft |
| Columbia, MO | $2,600–$6,400 per 150 ft |
| St. George, UT | $2,650–$6,650 per 150 ft |
| Hilo, HI | $2,950–$7,150 per 150 ft |
| Billings, MT | $2,800–$6,900 per 150 ft |
| Greenville, NC | $2,600–$6,250 per 150 ft |
| Hattiesburg, MS | $2,550–$6,200 per 150 ft |
| Santa Fe, NM | $2,650–$6,450 per 150 ft |
| Missoula, MT | $2,750–$6,850 per 150 ft |
| Cheyenne, WY | $2,600–$6,250 per 150 ft |
| Fairbanks, AK | $2,900–$7,050 per 150 ft |
Each city page has local rates by area, real-world fence work costs and a city-specific FAQ. Prices shown are the low end of the typical range, per 150 ft.
Alabama
- Birminghamfrom $2,600
- Huntsvillefrom $2,600
- Mobilefrom $2,600
- Montgomeryfrom $2,600
- Tuscaloosafrom $2,600
Arkansas
- Little Rockfrom $2,650
- Fayettevillefrom $2,650
California
- Los Angelesfrom $2,850
- San Franciscofrom $2,950
- Riversidefrom $2,800
- San Diegofrom $2,850
- Orange Countyfrom $2,750
- Oaklandfrom $2,850
- Sacramentofrom $2,700
- San Josefrom $2,850
- Fresnofrom $2,800
- Bakersfieldfrom $2,750
- Oxnardfrom $2,800
- Stocktonfrom $2,800
- Modestofrom $2,750
- Santa Rosafrom $2,750
- Visaliafrom $2,750
- Long Beachfrom $2,750
- Santa Barbarafrom $2,750
- Salinasfrom $2,750
Colorado
- Denverfrom $2,700
- Colorado Springsfrom $2,650
- Fort Collinsfrom $2,650
- Boulderfrom $2,650
Connecticut
- Hartfordfrom $2,750
- Bridgeportfrom $2,750
- New Havenfrom $2,750
- Stamfordfrom $2,750
Delaware
- Wilmingtonfrom $2,850
District of Columbia
- Washingtonfrom $2,800
Florida
- Miamifrom $2,850
- Tampafrom $2,700
- Orlandofrom $2,600
- Fort Lauderdalefrom $2,800
- Jacksonvillefrom $2,650
- West Palm Beachfrom $2,800
- St. Petersburgfrom $2,650
- Sarasotafrom $2,650
- Fort Myersfrom $2,650
- Lakelandfrom $2,650
- Daytona Beachfrom $2,650
- Palm Bayfrom $2,650
- Pensacolafrom $2,650
- Tallahasseefrom $2,650
- Gainesvillefrom $2,650
Georgia
Idaho
- Boisefrom $2,650
Indiana
- Indianapolisfrom $2,700
- Fort Waynefrom $2,650
- Evansvillefrom $2,650
- South Bendfrom $2,650
Iowa
- Des Moinesfrom $2,700
- Davenportfrom $2,700
- Cedar Rapidsfrom $2,700
Kentucky
- Louisvillefrom $2,700
- Lexingtonfrom $2,650
Louisiana
- New Orleansfrom $2,750
- Baton Rougefrom $2,750
- Lafayettefrom $2,700
- Shreveportfrom $2,700
Maine
- Portlandfrom $2,700
Maryland
- Baltimorefrom $2,700
Massachusetts
- Bostonfrom $2,800
- Worcesterfrom $2,650
- Springfieldfrom $2,650
Michigan
- Detroitfrom $2,700
- Grand Rapidsfrom $2,650
- Lansingfrom $2,650
- Flintfrom $2,650
- Ann Arborfrom $2,650
Minnesota
- Minneapolisfrom $2,850
- Duluthfrom $2,800
- Rochesterfrom $2,800
Mississippi
- Jacksonfrom $2,550
- Gulfportfrom $2,550
- Hattiesburgfrom $2,550
Missouri
- St. Louisfrom $2,650
- Kansas Cityfrom $2,650
- Springfieldfrom $2,600
- Columbiafrom $2,600
New Hampshire
- Manchesterfrom $2,700
New Jersey
- Newarkfrom $2,750
- Trentonfrom $2,800
- Jersey Cityfrom $2,750
- Atlantic Cityfrom $2,750
New Mexico
- Albuquerquefrom $2,650
- Las Crucesfrom $2,650
- Santa Fefrom $2,650
New York
North Carolina
- Charlottefrom $2,600
- Raleighfrom $2,600
- Greensborofrom $2,600
- Winston-Salemfrom $2,550
- Durhamfrom $2,600
- Fayettevillefrom $2,600
- Ashevillefrom $2,600
- Wilmingtonfrom $2,600
- Greenvillefrom $2,600
North Dakota
- Fargofrom $2,700
Ohio
- Cincinnatifrom $2,700
- Columbusfrom $2,700
- Clevelandfrom $2,700
- Daytonfrom $2,650
- Akronfrom $2,650
- Toledofrom $2,650
- Youngstownfrom $2,650
- Cantonfrom $2,650
Oklahoma
- Oklahoma Cityfrom $2,600
- Tulsafrom $2,600
Pennsylvania
- Philadelphiafrom $2,900
- Pittsburghfrom $2,850
- Harrisburgfrom $2,800
- Scrantonfrom $2,800
- Eriefrom $2,800
Rhode Island
- Providencefrom $2,650
South Carolina
- Greenvillefrom $2,550
- Columbiafrom $2,600
- Charlestonfrom $2,600
- Myrtle Beachfrom $2,550
South Dakota
- Sioux Fallsfrom $2,700
Tennessee
- Nashvillefrom $2,750
- Memphisfrom $2,650
- Knoxvillefrom $2,650
- Chattanoogafrom $2,600
Texas
- Dallasfrom $2,600
- Houstonfrom $2,600
- San Antoniofrom $2,550
- Fort Worthfrom $2,550
- Austinfrom $2,600
- McAllenfrom $2,550
- El Pasofrom $2,550
- Killeenfrom $2,550
- Corpus Christifrom $2,550
- Brownsvillefrom $2,550
- Beaumontfrom $2,550
- Arlingtonfrom $2,550
- Lubbockfrom $2,550
- Wacofrom $2,550
- Laredofrom $2,550
- Amarillofrom $2,550
Utah
- Salt Lake Cityfrom $2,700
- Provofrom $2,650
- Ogdenfrom $2,650
- St. Georgefrom $2,650
Vermont
- Burlingtonfrom $2,700
Virginia
- Virginia Beachfrom $2,600
- Richmondfrom $2,600
- Roanokefrom $2,600
- Norfolkfrom $2,600
West Virginia
- Charlestonfrom $2,600
Wyoming
- Cheyennefrom $2,600
Fence installation prices, 2026
| Job | Low | Typical | High |
|---|---|---|---|
| Wood privacy fence, 6 ft, pressure-treated pine, 150 linear ft, installedper 150 ft | $2,700 | $4,200 | $6,750 |
| Wood privacy fence, 6 ft, pressure-treated pineper linear ft | $18 | $28 | $45 |
| Cedar privacy fence, 6 ftper linear ft | $28 | $40 | $60 |
| Wood picket fence, 3–4 ftper linear ft | $15 | $25 | $40 |
| Vinyl (PVC) privacy fence, 6 ftper linear ft | $25 | $40 | $60 |
| Chain-link fence, 4 ft, galvanizedper linear ft | $12 | $20 | $30 |
| Chain-link fence, 6 ft, black vinyl-coatedper linear ft | $18 | $28 | $40 |
| Aluminum ornamental fence, 4 ftper linear ft | $25 | $40 | $60 |
| Wrought iron or steel ornamental fence, 5–6 ftper linear ft | $30 | $50 | $100 |
| Composite privacy fence, 6 ftper linear ft | $30 | $45 | $65 |
| Corrugated steel panel privacy fence, 6 ftper linear ft | $25 | $35 | $55 |
| Split-rail fence, 2 or 3 railsper linear ft | $10 | $18 | $30 |
| Privacy fence, 8 ft tall, wood or vinylper linear ft | $30 | $45 | $75 |
| Aluminum pool fence, 4–5 ft, code-compliant, with self-closing gateper linear ft | $25 | $40 | $65 |
| Frameless glass pool fenceper linear ft | $100 | $200 | $400 |
| Concrete block (CMU) wall, 6 ft, stucco finishper linear ft | $60 | $100 | $160 |
| Wood (timber) retaining wall, up to 3 ft highper linear ft | $40 | $75 | $120 |
| Walk gate, 4 ft wide, wood or vinyl, installedper gate | $200 | $400 | $700 |
| Double driveway gate, 10–12 ft, manual, installedper gate | $800 | $1,800 | $4,000 |
| Automatic gate opener, added to a driveway gateper gate | $1,000 | $2,200 | $4,500 |
| Replace one fence post, set in concreteper post | $125 | $225 | $400 |
| Fence repair: replace boards and a rail in one 8 ft sectionper section | $150 | $325 | $600 |
| Remove and haul away an old fenceper linear ft | $3 | $5 | $10 |
| Stain or seal a wood fence, 150 ft, one sideper fence | $600 | $1,200 | $2,100 |
Prices verified November 2026 · Cross-referenced against 17+ American pricing sources · See methodology
National average prices. Select a city above for location-specific pricing.
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local fence companies
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What kind of fence do you need?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the fence companies who reply.
Where should they text you?
- Max 2 fence companies. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched fence companies see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 fence companies about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Wood, Vinyl, Chain Link, Metal: Fence Costs by Material
Per linear foot installed, pressure-treated wood is $18–$45, cedar $28–$60, vinyl $25–$60, chain link $12–$30, aluminum $25–$60 and wrought iron $30–$100. Material is the biggest choice you make.
| Fence type | Cost | Best for |
|---|---|---|
| Wood privacy fence (pressure-treated pine), 6 ft | $18–$45 per linear ft | The standard backyard fence and the cheapest solid screen. Lasts 15–20 years with staining every 2–3 years. |
| Cedar privacy fence, 6 ft | $28–$60 per linear ft | Rot- and insect-resistant without chemicals and looks better as it grays. Lasts 20–30 years. |
| Wood picket fence, 3–4 ft | $15–$40 per linear ft | Front yards and curb appeal, where most cities cap height at 3–4 ft anyway. |
| Vinyl (PVC) privacy fence, 6 ft | $25–$60 per linear ft | No staining, no rot, a hose-down once a year. Costs more up front and lasts 25–40 years. |
| Chain-link fence, 4 ft galvanized | $12–$30 per linear ft | Dog yards, side yards and budgets. Black vinyl-coated 6 ft chain link runs $18–$40 per ft. |
| Aluminum ornamental fence, 4 ft | $25–$60 per linear ft | Pool enclosures and front yards that need to stay open. Never rusts; the look of iron at a lower price. |
| Wrought iron or steel ornamental, 5–6 ft | $30–$100 per linear ft | Security and a formal look. Heavy, strong, and needs repainting every few years to stop rust. |
| Composite privacy fence, 6 ft | $30–$65 per linear ft | The look of wood with vinyl's upkeep. The priciest common privacy material. |
| Corrugated steel panel privacy fence, 6 ft | $25–$55 per linear ft | A modern look that stands up to wind and termites; popular in the Southwest and Texas. |
| Split-rail fence, 2 or 3 rails | $10–$30 per linear ft | Big lots and property lines where you mark the edge, not screen it. Add wire mesh for dogs. |
| Pool fence (aluminum, 4–5 ft, self-closing gate) | $25–$65 per linear ft | Meeting the pool-barrier code: 48 in. tall or more, no gaps a 4 in. ball passes, self-closing, self-latching gate. Glass runs $100–$400 per ft. |
| Concrete block (CMU) wall, 6 ft, stucco | $60–$160 per linear ft | The standard yard wall in Phoenix, Las Vegas and much of Southern California: fireproof, termite-proof, lasts 50+ years. |
Wood vs vinyl comes down to time: wood costs less up front ($4,200 for 150 ft against $6,000) but wants $600–$2,100 of stain every two or three years and lasts 15–20 years; vinyl costs more and then costs nothing for 25–40. Chain link is the cheapest way to keep a dog in, aluminum the standard pool fence, and a block wall the standard yard wall in the desert Southwest.
Common Fence Jobs and What They Cost (2026)
Most backyard fences are 150–200 ft and take two or three days. 150 ft of wood privacy fence costs $2,700–$6,750; the jobs below show how gates, tear-out and material change it. Time on site is in brackets.
| Block or rate | Low | Typical | High |
|---|---|---|---|
| 150 ft of 6 ft wood privacy fence, open lot (2–3 days) | $2,700 | $4,200 | $6,750 |
| Same 150 ft in cedar (2–3 days) | $4,200 | $6,000 | $9,000 |
| Same 150 ft in vinyl (2 days) | $3,750 | $6,000 | $9,000 |
| 150 ft of 4 ft galvanized chain link (1–2 days) | $1,800 | $3,000 | $4,500 |
| 150 ft of 4 ft aluminum ornamental fence (1–2 days) | $3,750 | $6,000 | $9,000 |
| Tear out and replace 150 ft of wood privacy fence (3–4 days) | $3,150 | $4,950 | $8,250 |
| 150 ft of wood privacy fence with one walk gate (2–3 days) | $2,900 | $4,600 | $7,450 |
| Full backyard: 200 ft of wood privacy with two walk gates (3–4 days) | $4,000 | $6,400 | $10,400 |
| Pool fence: 60 ft of aluminum with self-closing gate and permit (1 day plus inspection) | $1,550 | $2,550 | $4,400 |
| Double driveway gate with automatic opener (1–2 days) | $1,800 | $4,000 | $8,500 |
| Storm repair: 3 sections rebuilt and 2 posts reset (half a day to a day) | $700 | $1,425 | $2,600 |
| Replace one rotted post in concrete (1–2 hrs) | $125 | $225 | $400 |
| Tear out and haul away 150 ft of old fence (half a day) | $450 | $750 | $1,500 |
| Stain or seal 150 ft of wood fence, one side (1 day) | $600 | $1,200 | $2,100 |
What moves these prices: material, height, the length of the run, the ground (rock, roots, slope, frost depth), whether an old fence has to come out, gates, your city's labor rates and whether a permit or survey is needed. Fence crews bill $40–$90 an hour when they work by the hour; nearly every fence is quoted by the foot.
Wood vs Vinyl vs Chain Link: What Each Costs and Why
For 150 ft of 6 ft fence, pressure-treated wood is $4,200 typical, vinyl $6,000, and 4 ft chain link $3,000. Same yard, three very different fences.
| Factor | Wood privacy (pressure-treated) | Vinyl privacy | Chain link (galvanized) |
|---|---|---|---|
| Typical price, 150 ft | $4,200 ($2,700–$6,750) | $6,000 ($3,750–$9,000) | $3,000 ($1,800–$4,500) |
| Per linear foot | $18–$45 | $25–$60 | $12–$30 for 4 ft; $18–$40 for 6 ft coated |
| Labor share | About half | About a third | About half |
| Life | 15–20 years with staining; posts fail first | 25–40 years; can crack in hard freezes or from impact | 20–30 years; galvanized rusts slowly, coated lasts longer |
| Upkeep | Stain or seal every 2–3 years, $600–$2,100 per 150 ft | Hose off; no painting | None beyond tightening |
| Privacy and looks | Full privacy; natural look; can be stained any color | Full privacy; limited colors; looks like vinyl | None without slats; utilitarian |
| Repairs | Easy and cheap: a section is $150–$600, a post $125–$400 | Panels replaced whole; matching an old color can be hard | Cheap; mesh can be re-stretched |
| Best for | Backyards, resale, tight budgets with a long view | Owners who will not stain; HOA-approved white or tan | Dog yards, side yards, rentals, big lots |
Over 20 years, the wood fence costs $4,200 plus six or seven stainings at $1,200 — about $11,400 — and will be due for replacement; the vinyl fence costs $6,000 once. The up-front gap favors wood; the long run is closer than it looks.
Fees, Labor Rates and Upkeep Costs
Beyond the fence itself: a permit $50–$500 where one is needed, a boundary survey $300–$1,000, labor $40–$90 an hour, and stain every few years. Spread over its life, a 150 ft wood fence costs about $280 a year before staining.
| Item | Low | Typical | High |
|---|---|---|---|
| Fence permit, where required | $50 | $150 | $500 |
| Boundary (property-line) survey | $300 | $550 | $1,000 |
| Fence crew labor, per hour | $40 | $60 | $90 |
| Labor only, wood privacy fence, per linear ft | $8 | $15 | $25 |
| Tear out and haul away 150 ft of old fence | $450 | $750 | $1,500 |
| Exterior fence stain or sealer, per gallon | $25 | $45 | $70 |
| Restaining a 150 ft wood fence, per year (every 3 years) | $200 | $400 | $700 |
| 150 ft wood fence spread over its life (20 / 15 / 15 years) | $135 | $280 | $450 |
| 150 ft vinyl fence spread over its life (40 / 25 / 25 years) | $95 | $240 | $360 |
Cost per year = the fence price divided by its life: a well-built, stained pine fence lasts toward 20 years, a cheap one with posts in dirt toward 15 or less; vinyl toward 40. Posts are the clock on a wood fence — set in concrete, crowned to shed water, they run the full life.
What affects fence installation costs
Material
Per foot installed: pressure-treated wood $18–$45, cedar $28–$60, vinyl $25–$60, chain link $12–$30, aluminum $25–$60, composite $30–$65, wrought iron $30–$100. For 150 ft that is $2,700–$6,750 in wood against $3,750–$9,000 in vinyl.
Height and length
8 ft runs $30–$75 a foot against $18–$45 for 6 ft, with a permit in most cities. Longer runs cost less per foot: setup, travel and disposal are spread over more posts.
The ground and the access
Rock, tree roots, slopes and buried lines slow every post hole; in the North, posts go below the frost line, often 3–4 ft. A side yard too narrow for a wheelbarrow means every picket is carried by hand.
The old fence
Tear-out and disposal adds $3–$10 a foot, $450–$1,500 for 150 ft, more when the old posts are in concrete.
Your city
Labor drives the gap between cities. Honolulu ($4,750 typical for 150 ft) sits at the top and Winston-Salem ($3,800) at the bottom, against the US typical of $4,200. Fence erectors' median pay runs from about $37,000 a year in Texas and Georgia to over $56,000 in California, New Jersey and Pennsylvania.
Gates, permits and the line
A walk gate is $200–$700, a driveway gate $800–$4,000, an automatic opener $1,000–$4,500 more. A permit is $50–$500 where one is needed and a boundary survey $300–$1,000 when the pins are gone.
How to save on fence installation
- Share the line with your neighbor.A boundary fence serves two yards. Splitting $4,200 is the biggest saving in this trade; California presumes it, and most states allow it by written agreement.
- Fence every side in one job.Per foot, 200 ft costs less than 100 ft because the crew's setup, travel and disposal are spread over more posts.
- Match the material to the job.Chain link ($12–$30 a foot) for the dog yard, wood ($18–$45) where you want privacy, vinyl ($25–$60) only if you will never stain.
- Pull the old pickets yourself.Tear-out is $450–$1,500 for 150 ft. Pickets and rails come off with a pry bar; leave posts in concrete to the crew.
- Book the slow season.Fence crews are busiest from spring through early fall. Late fall and winter quotes run lower where the ground stays workable.
- Pay for posts, not for a redo.Posts in concrete every 8 ft cost a few hundred dollars more than posts in dirt every 10 ft and add years to the fence. Replacing a post later is $125–$400 each.
Get two real quotes
Local fence companies · free · max 2 will contact you · no spam.
Fence Cost by Length and Lot
100 ft of 6 ft wood privacy fence: $1,800–$4,500. 150 ft: $2,700–$6,750. 200 ft (a typical quarter-acre backyard): $3,600–$9,000. 300 ft: $5,400–$13,500. A full acre has about 835 ft of perimeter: $8,350–$25,050 in split rail or $10,000–$25,050 in chain link.
Worked example: a quarter-acre suburban lot usually has about 200 ft of back and side fence line, with the house closing the front. In 6 ft pressure-treated wood that is about $5,600, plus two walk gates at $400 each, so roughly $6,400. If the builder-grade fence has to come out first, add $1,000.
Material moves the total more than length does. The same 200 ft in vinyl is about $8,000 and in 4 ft chain link about $4,000. On an acre lot, nobody builds 835 ft of privacy fence ($23,400); split rail at $15,050 or woven wire marks the line and a short run of privacy fence screens the patio.
What a fence installation quote should include
A real fence quote answers all of these. If it answers fewer than six, ask before you pay a deposit.
- The exact length in feet, the height, and a drawing showing the line and gate positions
- Material, grade and thickness: post size, rail count, picket thickness, panel brand for vinyl, gauge for chain link
- Post depth, spacing, and how much concrete per post
- Whether the old fence is torn out and hauled away, and the dump fee
- Gates as separate lines: size, hardware, and the frame material
- Who pulls the permit and who calls 811 for utility locating
- Who finds the property pins, or whether a survey is included
- Proof of liability insurance, and the license or registration number where your state has one
- Start and finish dates, payment stages, and the warranty on posts, panels and gates
How tall can your fence be, when you need a permit, and what a pool barrier must have
Fence rules are local: most cities allow 6 ft on a rear or side line without a permit and cap front yards at 4 ft or less. Where a permit is needed it costs $50–$500, and a pool barrier anywhere in the country must be at least 48 in. tall with a self-closing, self-latching gate.
The pattern across the country: a fence up to 6 ft on a rear or side property line is allowed with no permit, anything taller needs a permit and often the neighbor's consent, and the front yard is capped at 3–4 ft with sight-line rules at corners. The exceptions run both ways. Some cities need a permit for every fence, with a plan showing the line; Houston needs none under 8 ft. An 8 ft privacy fence at $30–$75 a foot is the job most likely to need the permit, so ask before you quote it.
Pool barriers are the one place state law reaches a backyard fence. The model codes and the state pool-safety acts agree on the basics: 48 in. minimum height, no opening a 4 in. ball passes, no more than 2 in. under the fence, nothing climbable on the outside, and a gate that self-closes, self-latches with the release at least 54 in. above grade, and opens away from the pool. Where the house forms part of the barrier, door alarms or self-closing doors are usually required too. Aluminum pool fence costs $25–$65 a foot and frameless glass $100–$400; the permit and inspection come with it.
- Call 811 before any post hole — utility locating is free, required in every state, and the fence company should do it
- Corner lots have sight-triangle rules at the street: expect a 3 ft cap near the driveway and intersection
- Historic districts and HOAs add their own approvals on top of the city's; get both before the deposit
- A fence built over the height limit comes down at your cost — the whole $2,700–$6,750, not the $50–$500 permit you skipped
If a fence company says 'we never pull permits here', ask them to show you the city page that says so.
Who pays for a fence between neighbors, when you need a survey, and what the HOA can say
A boundary survey costs $300–$1,000 and a fence an inch over the line is the neighbor's to remove, so the survey is cheap against a $2,700–$6,750 fence. Whether the neighbor must share the bill depends on the state: California presumes a 50/50 split with 30 days' written notice; most states leave it to agreement.
Start with the line. Property pins are iron rods at the corners, often buried under a few inches of soil or a previous fence post; a metal detector finds many of them. If they are gone, a licensed surveyor marks the corners for $300–$1,000 — more on large or wooded lots. Many homeowners then set the posts 4–6 in. inside the line so the fence, the concrete and the maintenance are all on their own land, and so the neighbor cannot attach to it.
Then the neighbor. Where a state fence law applies, one owner can give written notice and recover a share of a reasonable fence; where it does not, a written agreement before the posts go in is the only protection, and it should name the material, the height, the contractor and the split. Sharing a $4,200 fence is the single biggest saving in this trade.
HOAs are the third layer. About 77 million Americans live in roughly 370000 community associations, and most regulate fence height, material, color and setback from the street, often banning chain link and requiring the 'good side' to face out. Expect an architectural review form, a $25–$100 review fee in many associations, two to four weeks' wait, and a fine or forced removal if you build first. Get the approval letter before the fence company orders materials.
- Find the pins or order a survey before the quote, not after the posts are set
- Put any cost-sharing deal with the neighbor in writing: material, height, split, who maintains it
- Ask the HOA for the fence standard in writing — height, material, color, which side faces out
- Keep the fence on your side of the line if you want it to stay yours
None of this is legal advice. Your county recorder's office and your state's fence statute, if it has one, are the places to check.
What fence materials cost in 2026, and why quotes rose
A pressure-treated dog-ear picket is about $2.98 and a 4x4x8 post about $14 at a big-box store in 2026, so the lumber for 150 ft of privacy fence is roughly $1,800–$4,200. Prices are up because of the 10% tariff on imported softwood lumber from October 14, 2025, on top of anti-dumping and countervailing duties on Canadian lumber of about 45%, and the 50% tariff on steel and aluminum from June 4, 2025.
Materials are about half of a wood fence bill and two-thirds of a vinyl or aluminum one, so tariffs move fence prices more than they move painting or plumbing. Softwood lumber from Canada — about a quarter of what the US uses — carried anti-dumping and countervailing duties of about 45% by late 2025, and a separate 10% national-security tariff on all imported softwood lumber took effect October 14, 2025. Steel and aluminum imports have carried a 50% tariff since June 4, 2025, which reaches chain-link mesh, posts, gate frames, screws and ornamental aluminum panels. Vinyl is made from US PVC resin and has moved least.
That is why fence prices rose about 3.1% over the past year in our model: fence erectors' median pay rose 2.2% in federal data (May 2024 to May 2025), and we carry 4% for materials. On a $4,200 fence the whole increase is about $130; it does not explain a quote that jumps by a thousand dollars between estimate and invoice.
- Vinyl's premium over wood is about $12 a foot, $1,800 on 150 ft — and shrinks every time lumber tariffs rise
- Ask for the picket thickness and the treatment grade (ground-contact for posts); the cheapest lumber is where cheap quotes hide
- Steel posts for a wood fence add a few dollars a foot and remove the most common failure, the rotted post
If a quote changes between estimate and invoice, lumber prices are rarely the real reason; ask what changed in the scope.
What the cheap quote leaves out, when to build, and the DIY math
Two quotes for the same 150 ft can be $1,500 apart, and the gap is usually posts, not pickets. Here is what to check, when fence crews discount, and when building it yourself pays.
Timing moves the price too. Fence crews are busiest from spring through early fall, when quotes run highest and slots fill weeks ahead; late fall and winter quotes are often lower where the ground stays workable. In the North the season ends when the ground freezes, since post holes cannot be dug through frost, so a fall quote may carry a spring start date. After a hurricane or a big wind storm, every fence crew in the region is booked and prices rise for months — if the fence is standing, wait.
The DIY math for 150 ft of 6 ft pressure-treated privacy fence: materials run $1,800–$4,200 (pickets, rails, posts, concrete, hardware) plus an auger rental, against $2,700–$6,750 for a crew, so you save about $1,500 for 30–50 hours of digging, mixing and nailing over two or three weekends. Chain link, vinyl and anything with a driveway gate or a pool inspection are the jobs to hire out; a straight wood fence on flat ground is the one to try.
- Posts in dirt, not concrete.The most common cut and the reason a fence leans in five years. Every post should sit in 1–2 bags of concrete, crowned to shed water, 2 ft deep for a 6 ft fence and below the frost line in the North.
- Posts every 10 ft instead of 8.Fewer posts, more sag, and rails that bow. Eight-foot spacing is standard for wood and vinyl.
- Thin pickets and two rails.A 1/2 in. picket warps where a 5/8 or 3/4 in. one stays flat, and a 6 ft fence needs three rails. The quote should name both.
- Tear-out and haul-away not included.Removing the old fence is $3–$10 a foot, $450–$1,500 for 150 ft. A quote that is silent on it will add it later or leave the pile.
- Gates priced as fence.A gate is $200–$700 with a steel frame and adjustable hinges. A gate priced like a section of fence is a wood frame that will drag.
- No permit, no 811 call, no insurance.The permit is $50–$500; the utility locate is free; liability insurance is the contractor's cost. Skipping all three is how the cheap quote gets cheap, and all three land on you when something goes wrong.
If you want a cheaper pro job without the corner-cutting, share the line with the neighbor, pull the old pickets yourself, fence every side in one job and book the slow season. Fence crews bill $40–$90 an hour; the tear-out is the part you can do for free.
Fence installation cost: FAQ
How much does a fence cost?
$2,700–$6,750 to install 150 ft of 6 ft wood privacy fence in 2026, with $4,200 typical. Per linear foot that is $18–$45 for wood, $25–$60 for vinyl and $12–$30 for chain link.
How much does a fence cost per linear foot?
Installed: pressure-treated wood $18–$45, cedar $28–$60, vinyl $25–$60, 4 ft chain link $12–$30, aluminum $25–$60, wrought iron $30–$100, composite $30–$65. Labor is $8–$25 of that for wood.
How much does a privacy fence cost?
$2,700–$6,750 for 150 ft of 6 ft pressure-treated wood, $4,200–$9,000 in cedar and $3,750–$9,000 in vinyl. An 8 ft privacy fence runs $30–$75 a foot.
How much does a vinyl fence cost?
$25–$60 a linear foot for 6 ft privacy, or $3,750–$9,000 for 150 ft — about $1,800 more than wood, with no staining for 25–40 years.
How much does a chain-link fence cost?
$12–$30 a foot for 4 ft galvanized ($1,800–$4,500 for 150 ft) and $18–$40 for 6 ft black vinyl-coated.
How much does fence repair cost?
$150–$600 to rebuild one 8 ft section and $125–$400 to replace a post set in concrete. Replace the fence once a third of the posts are rotted.
Do I need a permit to build a fence?
Usually not for a fence up to 6 ft on a rear or side line; usually yes above that, in a front yard or around a pool. Where one is needed it costs $50–$500. Houston needs none under 8 ft; some cities need one for every fence. Check your city's zoning page. Not legal advice.
Who pays for a fence between neighbors?
It depends on the state. California's Good Neighbor Fence law presumes neighbors split the cost of a boundary fence that benefits both, with 30 days' written notice; several states have older partition-fence laws; most leave it to agreement. Put any deal in writing. Not legal advice.
Is it cheaper to build a fence yourself?
Materials for 150 ft of 6 ft pressure-treated privacy fence run $1,800–$4,200 against $2,700–$6,750 installed, so you save about $1,500 for 30–50 hours of work. Posts set wrong are the usual DIY failure.
Are fence prices going up in 2026?
About 3.1% over the past year in our model. Fence erectors' median pay rose 2.2% in federal data (May 2024 to May 2025), and lumber and steel prices rose with the 2025 tariffs — 10% on imported softwood lumber from October 14, 2025 and 50% on steel and aluminum from June 4, 2025.
Done your research?
Pick your city for local prices, or get two real fence installation quotes now. Free, no spam.