How much does a fence cost in Charleston?
By Our research team · Last verified · Methodology
Most fence companies in Charleston charge $2,600–$6,350 for 150 ft of wood privacy fence 6 ft pressure-treated pine, installed. $3,950 is the going rate. By the foot: wood $17–$42, vinyl $24–$58, aluminum $24–$58; replacing one post is $120–$365.
How we get this data- Typical
- $3,950
- Low end
- $1,300
- High end
- $7,950
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local fence companies send you a real quote. Free, no obligation.
Get my fair quote →The typical Charleston price is $3,950, 6% below the US typical of $4,200.
Charleston's price band
Charleston is cheaper than 74% of the 195 US metros we price for fence installation work.
A fence company in Charleston charges $2,600–$6,350 to install 150 ft of 6 ft wood privacy fence, and most homeowners pay about $3,950. Per linear foot that is $17–$42 for pressure-treated pine, $27–$57 for cedar, $24–$58 for vinyl and $12–$28 for 4 ft chain link. Repairs are priced by the section ($145–$550) or the post ($120–$365).
As a smaller market, Charleston prices a wood privacy fence about 6% below the US typical. Local pay drives it: fence erectors in the Charleston metro earn a median $41,600 a year (about 13% below the US median), while a pressure-treated picket costs about $2.98 everywhere. Posts here need to go 2.5 ft deep or more to sit below the frost line (30 in.), so expect longer posts and more concrete than a Sun Belt quote.
Fence permits and height limits are set by your city or county, not the state: most allow a 6 ft fence on a rear or side line without a permit and cap front yards at 3–4 ft, and taller fences need a permit or variance. Pool barriers follow the building code almost everywhere — at least 48 in. tall with a self-closing, self-latching gate — and are inspected. Ask the fence company for proof of insurance and, where your state licenses contractors, the license number. This is general information, not legal advice.
Comparing cities, or after the US-wide picture? See the national guide: Fence cost in the USA.
$2,600–$6,350 to install 150 ft of 6 ft wood privacy fence in Charleston — pressure-treated pine, posts in concrete — typically $3,950 ($17–$42 a linear foot). Vinyl runs $24–$58 a foot, chain link $12–$28, and a walk gate $195–$660. Verified November 2026. Get free Charleston quotes →
- 150 ft wood privacy fence: $2,600–$6,350 ($3,950 typical)
- Per linear ft: wood $17–$42; vinyl $24–$58; chain link $12–$28
- Cedar $27–$57/ft; aluminum $24–$58/ft; wrought iron $29–$95/ft
- Walk gate $195–$660; driveway gate $775–$3,800; post replacement $120–$365
- Old fence removal $3–$9/ft; permit $49–$480 where needed
Prices verified November 2026 · Cross-referenced against 17+ American pricing sources · See methodology
Installed prices, labor and materials, posts set in concrete, unless the row says otherwise. Charleston metro, re-verified November 2026. Gates, tear-out, permits and staining are their own rows.
| Service | Low | Typical | High |
|---|---|---|---|
| Wood privacy fence, 6 ft, pressure-treated pine, 150 linear ft, installedper 150 ft | $2,600per 150 ft | $3,950 | $6,350 |
| Wood privacy fence, 6 ft, pressure-treated pineper linear ft | $17per linear ft | $26 | $42 |
| Cedar privacy fence, 6 ftper linear ft | $27per linear ft | $38 | $57 |
| Wood picket fence, 3–4 ftper linear ft | $14per linear ft | $24 | $38 |
| Vinyl (PVC) privacy fence, 6 ftper linear ft | $24per linear ft | $38 | $58 |
| Chain-link fence, 4 ft, galvanizedper linear ft | $12per linear ft | $19 | $28 |
| Chain-link fence, 6 ft, black vinyl-coatedper linear ft | $17per linear ft | $27 | $38 |
| Aluminum ornamental fence, 4 ftper linear ft | $24per linear ft | $38 | $58 |
| Wrought iron or steel ornamental fence, 5–6 ftper linear ft | $29per linear ft | $48 | $95 |
| Composite privacy fence, 6 ftper linear ft | $29per linear ft | $43 | $65 |
| Corrugated steel panel privacy fence, 6 ftper linear ft | $24per linear ft | $33 | $52 |
| Split-rail fence, 2 or 3 railsper linear ft | $10per linear ft | $17 | $28 |
| Privacy fence, 8 ft tall, wood or vinylper linear ft | $29per linear ft | $43 | $70 |
| Aluminum pool fence, 4–5 ft, code-compliant, with self-closing gateper linear ft | $24per linear ft | $38 | $60 |
| Frameless glass pool fenceper linear ft | $100per linear ft | $195 | $385 |
| Concrete block (CMU) wall, 6 ft, stucco finishper linear ft | $58per linear ft | $95 | $150 |
| Wood (timber) retaining wall, up to 3 ft highper linear ft | $38per linear ft | $70 | $110 |
| Walk gate, 4 ft wide, wood or vinyl, installedper gate | $195per gate | $375 | $660 |
| Double driveway gate, 10–12 ft, manual, installedper gate | $775per gate | $1,700 | $3,800 |
| Automatic gate opener, added to a driveway gateper gate | $980per gate | $2,100 | $4,350 |
| Replace one fence post, set in concreteper post | $120per post | $205 | $365 |
| Fence repair: replace boards and a rail in one 8 ft sectionper section | $145per section | $300 | $550 |
| Remove and haul away an old fenceper linear ft | $3per linear ft | $4 | $9 |
| Stain or seal a wood fence, 150 ft, one sideper fence | $570per fence | $1,100 | $1,900 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local fence companies in Charleston
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What kind of fence do you need?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the fence companies who reply.
Where should they text you?
- Max 2 fence companies. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched fence companies see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 fence companies about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Prices verified November 2026 · Cross-referenced against 17+ American pricing sources · See methodology
Figures are for the Charleston metro area. Trip charges can apply on the far edges; tight access and old concrete footings in Downtown Charleston & the East End cost the most to work around.
Fence prices across Charleston
Where you live changes the labor, not the lumber. Tight lots in Downtown Charleston & the East End take the longest; fences in Huntington & Morgantown corridor tend to come in at or under the city typical.
Downtown Charleston & the East End
- Wood, per linear ft
- $18–$47 per linear ft
- 150 ft privacy fence
- $2,800–$7,100 / 150 ft privacy fence
Dense blocks where the fence line is also the property line. Expect a survey question before the quote, hand-carried materials and a higher price per foot on short runs.
West Side Charleston
- Wood, per linear ft
- $18–$45 per linear ft
- 150 ft privacy fence
- $2,700–$6,750 / 150 ft privacy fence
A fix-and-flip area where privacy fences are replaced on a schedule. Quotes vary widely, so get two and make both state post depth and concrete.
South Hills & Kanawha City
- Wood, per linear ft
- $17–$42 per linear ft
- 150 ft privacy fence
- $2,600–$6,350 / 150 ft privacy fence
Settled neighborhoods with easy access. Expect average rates and plenty of straight 150 ft runs, the cheapest kind to build.
Huntington & Morgantown corridor
- Wood, per linear ft
- $16–$41 per linear ft
- 150 ft privacy fence
- $2,500–$6,200 / 150 ft privacy fence
Lots of rentals and chain-link. Landlord work keeps repairs and short runs common, and prices sit a little under the city average.
Real-World Fence Costs in Charleston
Here's what common fence installation jobs cost in Charleston in 2026, labor, materials and posts set in concrete included.
150 ft of 6 ft wood privacy fence, open lot, no old fence — 2 to 3 days
Mark the line, dig 19 post holes 2 ft deep, set 4x4 posts in concrete, hang rails and nail up about 300 pickets. Most Charleston backyards land here; rocky ground, slopes and a tear-out push the bill toward $6,350.
Replace a failing 150 ft fence: tear-out, haul-away and new wood privacy fence
Removing the old fence and its concrete footings costs $420–$1,350 on top of the $2,600–$6,350 for the new one, about $4,620 in all. Old footings in the way often mean new post holes offset a few inches, which is normal.
Fence a full backyard: 200 ft of wood privacy with two walk gates
200 ft at about $26 a foot plus two gates at $375 each comes to about $6,000 in Charleston. Gates are the part that sags first, so ask for steel-framed gate kits and adjustable hinges.
Pool fence: 60 ft of 4–5 ft aluminum with a self-closing gate, permitted
60 ft at $38 a foot plus a $49–$480 permit is about $2,445. Pool barriers must be at least 48 in. tall with a self-closing, self-latching gate that opens away from the pool, and almost every city inspects them.
Storm repair: 3 blown-down sections and 2 rotted posts
Three 8 ft sections rebuilt at $300 each and two posts reset in concrete at $205 each is about $1,310. If more than a third of the posts are rotted at ground level, price a full replacement ($2,600–$6,350) instead.
How much does a fence cost in Charleston?
A 150 ft wood privacy fence in Charleston costs $2,600 to $6,350. The middle of the market, about $3,950, covers 4x4 pressure-treated posts set 2 ft deep in concrete every 8 ft, two or three 2x4 rails, dog-ear pickets, hardware and cleanup. Gates ($195–$660), staining ($570–$1,900) and removal of the old fence ($3–$9 a foot) are extra lines.
Material changes the bill more than anything else. The same 150 ft in cedar is $4,050–$8,550, in vinyl $3,600–$8,700, in 4 ft chain link $1,800–$4,200 and in aluminum $3,600–$8,700. Prices re-checked against 17 sources in November 2026.
Fence prices in Charleston (2026): by material, per linear foot
Wood privacy fence costs $17–$42 a linear foot installed in Charleston, vinyl $24–$58, chain link $12–$28 and aluminum $24–$58.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Wood privacy, 6 ft, pressure-treated pine | $17 | $26 | $42 |
| Cedar privacy, 6 ft | $27 | $38 | $57 |
| Wood picket, 3–4 ft | $14 | $24 | $38 |
| Vinyl privacy, 6 ft | $24 | $38 | $58 |
| Chain link, 4 ft galvanized | $12 | $19 | $28 |
| Aluminum ornamental, 4 ft | $24 | $38 | $58 |
| Wrought iron or steel, 5–6 ft | $29 | $48 | $95 |
| Composite privacy, 6 ft | $29 | $43 | $65 |
The lumber is the cheap part. Pickets, posts and concrete for 150 ft cost $1,800–$4,200 at a big-box store; the Charleston price of $2,600–$6,350 is mostly two or three days of digging, setting and nailing.
What moves a fence quote in Charleston:
- Material — per foot, pressure-treated wood is $17–$42, vinyl $24–$58, chain link $12–$28, aluminum $24–$58, wrought iron $29–$95.
- Height — 8 ft runs $29–$70 a foot against $17–$42 for 6 ft, needs longer posts set deeper, and usually a permit.
- The old fence — tear-out and disposal adds $3–$9 a foot, $420–$1,350 for 150 ft, more if the old posts are in concrete.
- Ground and access — rock, roots, slopes and hand-dug holes next to gas or sprinkler lines add time; so does carrying 300 pickets through a side gate.
- Gates, permits and surveys — a walk gate is $195–$660, a driveway gate $775–$3,800, a permit $49–$480 where one is needed, and a boundary survey $285–$905 if the line is in doubt.
Ask every Charleston fence company the same five things: post size and depth, how much concrete per post, picket thickness and grade, whether tear-out and haul-away are included, and the warranty on posts and gates. Compare those, not the headline price. Get a quote for your fence job →
Fence Cost in Charleston by Length and Material
100 ft of wood privacy fence: $1,750–$4,250. 150 ft: $2,600–$6,350. 200 ft: $3,450–$8,450. 300 ft: $5,200–$12,700. The same 150 ft in vinyl is $3,600–$8,700, in cedar $4,050–$8,550, in chain link $1,800–$4,200.
Worked example: a typical Charleston quarter-acre lot has about 200 ft of back and side fence line. In 6 ft pressure-treated wood that is about $5,250, plus two walk gates at $375 each, so roughly $6,000. If the old fence has to come out first, add $800.
Material moves the total more than length does. The same 200 ft in vinyl is about $7,600 and in 4 ft chain link about $3,800, which is why two quotes for one yard can look nothing alike until you line up what each one is made of.
Charleston Fence Costs by Material and Type
| Fence type | Cost | Best for |
|---|---|---|
| Wood privacy fence (pressure-treated pine), 6 ft | $17–$42 per linear ft | The standard backyard fence and the cheapest solid screen. Lasts 15–20 years with staining every 2–3 years. |
| Cedar privacy fence, 6 ft | $27–$57 per linear ft | Rot- and insect-resistant without chemicals and looks better as it grays. Lasts 20–30 years. |
| Wood picket fence, 3–4 ft | $14–$38 per linear ft | Front yards and curb appeal, where most cities cap height at 3–4 ft anyway. |
| Vinyl (PVC) privacy fence, 6 ft | $24–$58 per linear ft | No staining, no rot, a hose-down once a year. Costs more up front and lasts 25–40 years. |
| Chain-link fence, 4 ft galvanized | $12–$28 per linear ft | Dog yards, side yards and budgets. Black vinyl-coated 6 ft chain link runs $17–$38 per ft. |
| Aluminum ornamental fence, 4 ft | $24–$58 per linear ft | Pool enclosures and front yards that need to stay open. Never rusts; the look of iron at a lower price. |
| Wrought iron or steel ornamental, 5–6 ft | $29–$95 per linear ft | Security and a formal look. Heavy, strong, and needs repainting every few years to stop rust. |
| Composite privacy fence, 6 ft | $29–$65 per linear ft | The look of wood with vinyl's upkeep. The priciest common privacy material. |
| Corrugated steel panel privacy fence, 6 ft | $24–$52 per linear ft | A modern look that stands up to wind and termites; popular in the Southwest and Texas. |
| Split-rail fence, 2 or 3 rails | $10–$28 per linear ft | Big lots and property lines where you mark the edge, not screen it. Add wire mesh for dogs. |
| Pool fence (aluminum, 4–5 ft, self-closing gate) | $24–$60 per linear ft | Meeting the pool-barrier code: 48 in. tall or more, no gaps a 4 in. ball passes, self-closing, self-latching gate. Glass runs $100–$385 per ft. |
| Concrete block (CMU) wall, 6 ft, stucco | $58–$150 per linear ft | The standard yard wall in Phoenix, Las Vegas and much of Southern California: fireproof, termite-proof, lasts 50+ years. |
Materials vs. what you pay — the Charleston fence bill
At a big-box store, a pressure-treated dog-ear picket is about $2.98, a 4x4x8 post about $14 and a 50 lb bag of concrete about $6. For 150 ft of 6 ft privacy fence that is roughly $1,800–$4,200 of materials inside a $2,600–$6,350 job in Charleston. The difference pays for a crew of two or three for two or three days, the auger or hand digging, the truck, disposal and the warranty.
Labor is about half of a wood fence bill and a third of a vinyl one, which is why wood prices differ more by city than vinyl prices do. Where fence crews earn more, a wood fence costs more; a vinyl panel costs about the same in Charleston as anywhere else.
What's included in a Charleston fence quote (and what costs extra)
A standard quote covers marking the line, digging and setting posts in concrete, rails, pickets or panels, hardware, basic cleanup and a workmanship warranty. The headline price often leaves out:
- Tearing out the old fence — $3–$9 a foot, $420–$1,350 for 150 ft
- Gates — $195–$660 for a walk gate, $775–$3,800 for a double driveway gate
- Permit and survey — $49–$480 for a permit where one is needed; $285–$905 for a boundary survey
- Staining or sealing — $570–$1,900 for 150 ft, a few weeks after the fence goes up
Ask for post size, depth and concrete in writing, and for proof of liability insurance.
Material
Per linear foot in Charleston: pressure-treated wood $17–$42, cedar $27–$57, vinyl $24–$58, chain link $12–$28, aluminum $24–$58, composite $29–$65, wrought iron $29–$95. Material is the single biggest choice you make.
Height and length
Taller costs more per foot — 8 ft runs $29–$70 against $17–$42 for 6 ft — and longer costs less per foot, since setup and travel are spread over more posts. Front-yard fences are capped at 3–4 ft in most cities.
Site and access
Rock, tree roots, slopes and buried lines turn a 20-minute post hole into an hour. A side yard too narrow for a wheelbarrow means every picket is carried by hand.
Removing the old fence
Tear-out and disposal adds $3–$9 a linear foot, about $420–$1,350 for 150 ft. Posts set in concrete cost more to pull than posts in dirt.
Local rules and the property line
Fence permits and height limits are set by your city or county, not the state: most allow a 6 ft fence on a rear or side line without a permit and cap front yards at 3–4 ft, and taller fences need a permit or variance. Pool barriers follow the building code almost everywhere — at least 48 in. tall with a self-closing, self-latching gate — and are inspected. Ask the fence company for proof of insurance and, where your state licenses contractors, the license number.
Labor rates in Charleston
Fence erectors in the Charleston metro earn a median $41,600 a year in federal wage data, about 13% below the US median. Labor is about half of a wood fence bill, so Charleston prices land about 6% below the US typical of $4,200 for 150 ft.
Gates and extras
A walk gate is $195–$660, a manual double driveway gate $775–$3,800 and an automatic opener $980–$4,350 more. Staining a new wood fence runs $570–$1,900 for 150 ft and should wait a few weeks for the wood to dry.
- Share the line with your neighbor.A boundary fence serves two yards. Splitting $3,950 two ways is the single biggest saving there is, and many neighbors agree to it in writing before work starts.
- Price the whole line in one job.Per foot, a 200 ft fence costs less than a 100 ft one because the crew's setup, travel and disposal are spread over more posts. Do all sides at once.
- Pick the material for the job, not the look.Chain link ($12–$28 a foot) fences a dog yard for a third of the price of wood; wood ($17–$42) screens a backyard for less than vinyl ($24–$58); vinyl saves the $570–$1,900 staining bill every few years.
- Do the tear-out yourself.Pulling the old pickets and rails yourself saves $420–$1,350 on 150 ft. Leave posts in concrete to the crew unless you have a jack and a strong back.
- Book the slow season.Fence crews in Charleston are busiest from spring through early fall. Late fall and winter quotes are often lower where the ground is workable. Here the ground freezes, so the window is before the frost sets in.
- Get post depth and concrete in writing.Two quotes $1,350 apart on the same 150 ft usually differ on posts, not pickets: 4x4 posts set 2 ft deep in concrete every 8 ft against posts in dirt every 10 ft. Make both quotes say the same thing.
Charleston fence companies quote by the linear foot, with gates and tear-out as separate lines. Before you pay a deposit, get these in writing:
- The exact length in feet, the height, and a drawing showing the line and gate positions
- Material, grade and thickness: post size, rail count, picket thickness, panel brand for vinyl
- Post depth, spacing, and how much concrete per post
- Whether the old fence is torn out and hauled away, and the dump fee
- Gates as separate lines: size, hardware, and the frame material
- Who pulls the permit, who locates underground utilities (811), and who finds the property pins
- Proof of liability insurance, and the license or registration number where your state has one
- Start and finish dates, payment stages, and the warranty on posts, panels and gates
How much does a fence cost in Charleston?
$2,600–$6,350 to install 150 ft of 6 ft wood privacy fence, pressure-treated pine with posts in concrete, and $3,950 is typical. That is about $17–$42 a linear foot.
How much does a fence cost per linear foot in Charleston?
Installed: wood privacy $17–$42, cedar $27–$57, vinyl $24–$58, 4 ft chain link $12–$28, aluminum $24–$58, wrought iron $29–$95, composite $29–$65.
How much does a vinyl fence cost in Charleston?
$24–$58 a linear foot for 6 ft vinyl privacy, or $3,600–$8,700 for 150 ft. It costs more than wood up front but never needs staining.
How much does a chain-link fence cost in Charleston?
$12–$28 a foot for 4 ft galvanized ($1,800–$4,200 for 150 ft) and $17–$38 a foot for 6 ft black vinyl-coated.
How much does fence repair cost in Charleston?
About $145–$550 to rebuild one 8 ft section (boards and a rail) and $120–$365 to replace a post set in concrete. Three sections and two posts after a storm is about $1,310.
How much does it cost to remove an old fence in Charleston?
$3–$9 a linear foot including haul-away, about $420–$1,350 for 150 ft. Posts set in concrete cost more to pull.
Do I need a permit to build a fence in West Virginia?
Fence permits and height limits are set by your city or county, not the state: most allow a 6 ft fence on a rear or side line without a permit and cap front yards at 3–4 ft, and taller fences need a permit or variance. Pool barriers follow the building code almost everywhere — at least 48 in. tall with a self-closing, self-latching gate — and are inspected. Ask the fence company for proof of insurance and, where your state licenses contractors, the license number.
How much does a gate cost in Charleston?
A 4 ft walk gate is $195–$660 installed, a manual double driveway gate $775–$3,800, and an automatic opener adds $980–$4,350.
How deep should fence posts go?
About a third of the above-ground height, so 2 ft for a 6 ft fence, and below the frost line where the ground freezes — around 2.5 ft here. Each post sits in 1–2 bags of concrete; posts set in dirt are the most common reason a fence leans in five years.
Who pays for a fence between neighbors in West Virginia?
In most states, a fence on the line is shared property once both neighbors use it, but there is no duty to split the cost of a new one unless local law or an agreement says so. Get any cost-sharing deal in writing before work starts. This is general information, not legal advice.
Prices verified November 2026 · Cross-referenced against 17+ American pricing sources · See methodology
Prices for the Charleston metro area, November 2026. Outer suburbs may vary.
Get a fair fence installation quote in Charleston
Local fence companies · Free quotes · No obligation, no spam.