A 4 ft walk gate costs $200–$700 installed in 2026, a manual double driveway gate $800–$4,000, and an automatic opener adds $1,000–$4,500. A fence permit, where one is needed, runs $50–$500; a boundary survey to find the line $300–$1,000. Most cities cap fences at 6 ft in back and 4 ft in front.
Walk gate $200–$700; double driveway gate $800–$4,000; automatic opener $1,000–$4,500
Driveway gate with opener, installed: $1,800–$8,500
Fence permit $50–$500 where required; boundary survey $300–$1,000
Pool barrier: 48 in. tall, self-closing, self-latching gate; 60 ft permitted is $1,550–$4,400
Common zoning caps: 6 ft rear and side, 4 ft front
Prices verified November 2026 · Cross-referenced against 17+ American pricing sources · See methodology
01 / PricesUSA · November 2026
Gate, permit and survey prices (2026)
Gates are the moving parts of a fence and the first to fail. A walk gate is $200–$700; a driveway gate with an opener $1,800–$8,500.
Gate, permit and survey prices (2026)Per gate, low to high with the typical price marked.
Double driveway gate with automatic opener, installed$4,000$1,800–$8,500
Automatic gate opener, added to a driveway gate$2,200$1,000–$4,500
Automatic gate opener, added to a driveway gateper gate
$1,000
$2,200
$4,500
Double driveway gate with automatic opener, installedper gate
$1,800
$4,000
$8,500
Fence permit, where one is requiredper permit
$50
$150
$500
Boundary (property-line) surveyper survey
$300
$550
$1,000
Aluminum pool fence, 4–5 ft, code-compliant, with self-closing gateper linear ft
$25
$40
$65
Frameless glass pool fenceper linear ft
$100
$200
$400
Pool fence, 60 ft of aluminum with gate and permitper job
$1,550
$2,550
$4,400
Replace one fence post, set in concreteper post
$125
$225
$400
US prices, November 2026. Low is a simple job in a low-cost area; high is a bigger job or a high-cost city.
02 / By city195 cities priced
Does fence gates, permits and property lines change by city?
Yes. The same job costs more where labor and rent cost more. Here's how fence installation prices in the biggest US metros compare with the US typical of $4200.
Fence installation prices in the 12 biggest US metrosEach city's typical fence installation price against the US typical of $4,200.
Gates: why they cost more than the fence around them
A gate is a fence section that moves, so it needs a heavier post set deeper, a frame that will not sag, hinges, a latch and adjustment. A 4 ft walk gate in wood or vinyl is $200–$700; a manual double driveway gate 10–12 ft wide $800–$4,000, in steel or aluminum at the top of that range. Steel-framed gate kits and adjustable hinges are the upgrade that stops the gate from dragging in two years.
An automatic opener adds $1,000–$4,500: the operator arm or slide motor, a keypad or remotes, safety sensors, and power — a trench to the house or a solar panel. A driveway gate with an opener installed is $1,800–$8,500 in all.
02
Permits and height rules
Fence permits are local, not state, and cost $50–$500 where they apply. The common pattern: no permit for a fence up to 6 ft on a rear or side line, a permit above that (often with an 8 ft cap), and a 4 ft or lower cap in the front yard with sight-line rules at corners and driveways. Some cities need a permit for any fence; others, Houston among them, need none below 8 ft. Call 811 before digging — utility locating is free and required — and ask who pulls the permit before you sign.
03
Pool barriers
Every state and the model codes require a barrier around a residential pool: at least 48 in. tall, no opening a 4 in. sphere passes through, no more than 2 in. under the bottom, nothing climbable on the outside, and a gate that self-closes, self-latches with the release at least 54 in. up, and opens away from the pool. Aluminum pool fence runs $25–$65 a foot and frameless glass $100–$400. The permit comes with an inspection, so 60 ft of aluminum with a gate and permit is $1,550–$4,400. Where the house is one side of the barrier, alarms or self-closing doors are also required in most states.
04
Property lines, surveys and the neighbor
A fence an inch over the line is the neighbor's to remove. If the pins are gone or the old fence wanders, a boundary survey is $300–$1,000, cheap against a $2,700–$6,750 fence rebuilt. Many homeowners set the fence a few inches inside the line to avoid the question, which also keeps the posts on their own land.
Who pays is a state-law question. California's Good Neighbor Fence law presumes neighbors share the cost of a boundary fence that benefits both, with 30 days' written notice; several other states have fence acts that let one neighbor compel a share for a partition fence, while most states leave it to agreement. HOAs add their own layer: height, material and color approval, often a $25–$100 review fee and a wait of two to four weeks. Not legal advice — check your state and HOA rules before the quote.
04 / Check a quoteFree · no sign-up
Got a price? See if it's fair
Walk gate, 4 ft wide, wood or vinyl, installed
Type the price you were quoted. We compare it with the US range of $200–$700 per gate.
Get free quotes from up to 2 local fence companies
Free · No obligation · About a minute
1The job
2Budget
3Your details
C
Casey · LocalGoingRate
What kind of fence do you need?
Tap one to start.
C
Casey · LocalGoingRate
What's your rough budget?
A ballpark is fine. It helps the fence companies who reply.
C
Casey · LocalGoingRate
Where should they text you?
Max 2 fence companies. No call floods.
100% free. No obligation.
🔒 Only your matched fence companies see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 fence companies about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
C
Casey · LocalGoingRate
Check your phone
05 / Questions6 answers
Fence gates, permits and property lines: FAQ
How much does a driveway gate cost?
$800–$4,000 for a manual double gate 10–12 ft wide, and $1,800–$8,500 with an automatic opener installed.
Do I need a permit to build a fence?
Often not for a 6 ft fence on a rear or side line, usually yes above that, in a front yard or around a pool. Where one is needed it costs $50–$500. Rules are set by your city, so check the zoning page before you sign.
How tall can my fence be?
Most cities allow 6 ft on rear and side lines without a permit and cap front yards at 4 ft or less; 8 ft usually needs a permit or variance.
How much is a property survey for a fence?
$300–$1,000 for a boundary survey that marks the corners. Worth it whenever the pins are missing or the old fence line is in doubt.
What does a pool fence have to have?
At least 48 in. tall, no gap a 4 in. ball passes, a self-closing, self-latching gate opening away from the water with the latch 54 in. up, and an inspection. Aluminum pool fence is $25–$65 a foot.
Can my neighbor attach to my fence or make me share the cost?
It depends on the state and whether the fence is on the line. California presumes shared cost for a shared benefit; most states need an agreement. Put any deal in writing. Not legal advice.
These are independent estimates built from public cost guides, dated city price pages, fence company price lists, big-box material prices and federal wage data. No fence company can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read the full methodology →