Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does a fence cost in Philadelphia?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched12 min read
Fence installation cost

Fence installation costs in Philadelphia

Philadelphia, PAChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Philadelphia, PA
$2,900–$7,050per 150 ft

Most fence companies in Philadelphia charge $2,900–$7,050 for 150 ft of wood privacy fence installed, 6 ft tall, and $4,500 is what most homeowners here pay — about $30 a foot. Cedar costs $30–$60 a foot, a walk gate $215–$730, and tearing out the old fence $3–$11 a foot.

How we get this data
Typical
$4,500
Low end
$1,700
High end
$10,250
150 ft wood privacy
$2,900–$7,050
Wood, per linear ft
$19–$47
Vinyl, per linear ft
$26–$60
Chain link, per linear ft
$13–$31

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local fence companies send you a real quote. Free, no obligation.

Get my fair quote →
Typical fence installation price: Philadelphia vs nearby citiesTypical price, per 150 ft. The line marks the US typical.
Philadelphia, PAThis guide $4,500
New York, NY $4,450
Trenton, NJ $4,350
Newark, NJ $4,300

The typical Philadelphia price is $4,500, 7% above the US typical of $4,200.

Where Philadelphia sits among 195 US metrosNumber of metros at each typical fence installation price, per 150 ft.

Philadelphia's price band

Philadelphia is pricier than 96% of the 195 US metros we price for fence installation work.

Expect $2,900–$7,050 for 150 ft of 6 ft wood privacy fence in Philadelphia, with $4,500 the going rate. The same run in vinyl is $3,900–$9,000 and in cedar $4,500–$9,000; 4 ft chain link is $1,950–$4,650. Fence crews here bill about $46–$95 an hour when they work by the hour, but nearly every fence is quoted by the foot.

Philadelphia is a large metro with mid-range labor prices. Fence erectors in the Philadelphia-Camden-Wilmington metro earn a median $59,530 a year in federal wage data, about 24% above the US median of $47,980, and that pay gap, not the lumber, is what moves a fence quote here about 7% above the national typical. Posts here need to go 3 ft deep or more to sit below the frost line (36 in.), so expect longer posts and more concrete than a Sun Belt quote.

Fence permits and height limits are set by your city or county, not the state: most allow a 6 ft fence on a rear or side line without a permit and cap front yards at 3–4 ft, and taller fences need a permit or variance. Pool barriers follow the building code almost everywhere — at least 48 in. tall with a self-closing, self-latching gate — and are inspected. Ask the fence company for proof of insurance and, where your state licenses contractors, the license number. This is general information, not legal advice.

Comparing cities, or after the US-wide picture? See the national guide: Fence cost in the USA.

Quick answer

$2,900–$7,050 to install 150 ft of 6 ft wood privacy fence in Philadelphia — pressure-treated pine, posts in concrete — typically $4,500 ($19–$47 a linear foot). Vinyl runs $26–$60 a foot, chain link $13–$31, and a walk gate $215–$730. Verified November 2026. Get free Philadelphia quotes →

  • 150 ft wood privacy fence: $2,900–$7,050 ($4,500 typical)
  • Per linear ft: wood $19–$47; vinyl $26–$60; chain link $13–$31
  • Cedar $30–$60/ft; aluminum $26–$60/ft; wrought iron $32–$105/ft
  • Walk gate $215–$730; driveway gate $845–$4,150; post replacement $135–$425
  • Old fence removal $3–$11/ft; permit $52–$510 where needed

Prices verified November 2026 · Cross-referenced against 17+ American pricing sources · See methodology

Detailed pricing — Fence installation cost in Philadelphia 2026

Installed prices, labor and materials, posts set in concrete, unless the row says otherwise. Philadelphia metro, re-verified November 2026. Gates, tear-out, permits and staining are their own rows.

ServiceLowTypicalHigh
Wood privacy fence, 6 ft, pressure-treated pine, 150 linear ft, installedper 150 ft$2,900per 150 ft$4,500$7,050
Wood privacy fence, 6 ft, pressure-treated pineper linear ft$19per linear ft$30$47
Cedar privacy fence, 6 ftper linear ft$30per linear ft$42$60
Wood picket fence, 3–4 ftper linear ft$16per linear ft$27$42
Vinyl (PVC) privacy fence, 6 ftper linear ft$26per linear ft$42$60
Chain-link fence, 4 ft, galvanizedper linear ft$13per linear ft$21$31
Chain-link fence, 6 ft, black vinyl-coatedper linear ft$19per linear ft$30$41
Aluminum ornamental fence, 4 ftper linear ft$26per linear ft$42$60
Wrought iron or steel ornamental fence, 5–6 ftper linear ft$32per linear ft$53$105
Composite privacy fence, 6 ftper linear ft$31per linear ft$47$65
Corrugated steel panel privacy fence, 6 ftper linear ft$27per linear ft$37$57
Split-rail fence, 2 or 3 railsper linear ft$11per linear ft$19$31
Privacy fence, 8 ft tall, wood or vinylper linear ft$32per linear ft$48$80
Aluminum pool fence, 4–5 ft, code-compliant, with self-closing gateper linear ft$26per linear ft$42$65
Frameless glass pool fenceper linear ft$105per linear ft$210$410
Concrete block (CMU) wall, 6 ft, stucco finishper linear ft$65per linear ft$110$165
Wood (timber) retaining wall, up to 3 ft highper linear ft$43per linear ft$80$125
Walk gate, 4 ft wide, wood or vinyl, installedper gate$215per gate$430$730
Double driveway gate, 10–12 ft, manual, installedper gate$845per gate$1,900$4,150
Automatic gate opener, added to a driveway gateper gate$1,050per gate$2,300$4,600
Replace one fence post, set in concreteper post$135per post$245$425
Fence repair: replace boards and a rail in one 8 ft sectionper section$165per section$355$635
Remove and haul away an old fenceper linear ft$3per linear ft$6$11
Stain or seal a wood fence, 150 ft, one sideper fence$660per fence$1,300$2,250
fence installation jobs in Philadelphia: what they costPer linear ft, low to high with the typical price marked. Every line is in the table above.
Frameless glass pool fence $210$105–$410
Concrete block (CMU) wall, 6 ft, stucco finish $110$65–$165
Wood (timber) retaining wall, up to 3 ft high $80$43–$125
Wrought iron or steel ornamental fence, 5–6 ft $53$32–$105
Privacy fence, 8 ft tall, wood or vinyl $48$32–$80
Composite privacy fence, 6 ft $47$31–$65
Cedar privacy fence, 6 ft $42$30–$60
Vinyl (PVC) privacy fence, 6 ft $42$26–$60
Aluminum ornamental fence, 4 ft $42$26–$60
Aluminum pool fence, 4–5 ft, code-compliant, with self-closing gate $42$26–$65
Corrugated steel panel privacy fence, 6 ft $37$27–$57
Wood privacy fence, 6 ft, pressure-treated pine $30$19–$47
Already got a quote?
Check it against these Philadelphia prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local fence companies in Philadelphia

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What kind of fence do you need?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 17+ American pricing sources · See methodology

Prices cover the Philadelphia metro. Outlying towns can run a little lower; small lots and hand-carried materials in Center City & Fishtown and North Philly sit at the top of each range.

How fence installation costs vary across Philadelphia

Fence prices across Philadelphia

Where you live changes the labor, not the lumber. Tight lots in Center City & Fishtown take the longest; fences in South Philly, Delco & the suburbs price near the city typical, with longer runs.

Fence installation prices across PhiladelphiaTypical range by part of the metro, per 150 ft. The line marks the Philadelphia typical.
Center City & Fishtown8–12% above the city average $21–$53per 150 ft
North PhillyStandard to 6% above $20–$50per 150 ft
West & Southwest PhillyStandard pricing $19–$47per 150 ft
South Philly, Delco & the suburbsStandard; longer runs and more gates $19–$49per 150 ft

Center City & Fishtown

8–12% above the city average
Center City, Fishtown, Northern Liberties, Kensington
Wood, per linear ft
$21–$53 per linear ft
150 ft privacy fence
$3,150–$7,900 / 150 ft privacy fence

Small lots, tight access and paid parking. Materials come in by hand through a gate or a side yard, old fences come out the same way, and the crew often needs a street permit for the truck.

North Philly

Standard to 6% above
North Philadelphia, Germantown, Olney
Wood, per linear ft
$20–$50 per linear ft
150 ft privacy fence
$3,000–$7,450 / 150 ft privacy fence

Older houses on narrow lots, many with a leaning fence from the 1990s. Tear-out and disposal show up on most quotes, and old concrete footings add digging time.

West & Southwest Philly

Standard pricing
West Philadelphia, University City, Southwest
Wood, per linear ft
$19–$47 per linear ft
150 ft privacy fence
$2,900–$7,050 / 150 ft privacy fence

Residential streets with average pricing. Sharing a boundary fence with the neighbor is the easiest way to save here.

South Philly, Delco & the suburbs

Standard; longer runs and more gates
South Philadelphia, Upper Darby, Camden NJ
Wood, per linear ft
$19–$49 per linear ft
150 ft privacy fence
$2,900–$7,350 / 150 ft privacy fence

Mostly newer subdivisions with easy access, so rates sit near the city average. Fence lines run 200–300 ft, and most quotes include two gates.

What you'll actually pay — job by job

Real-World Fence Costs in Philadelphia

Here's what common fence installation jobs cost in Philadelphia in 2026, labor, materials and posts set in concrete included.

150 ft of 6 ft wood privacy fence, open lot, no old fence — 2 to 3 days

$2,900–$4,500

Mark the line, dig 19 post holes 2 ft deep, set 4x4 posts in concrete, hang rails and nail up about 300 pickets. Most Philadelphia backyards land here; rocky ground, slopes and a tear-out push the bill toward $7,050.

Replace a failing 150 ft fence: tear-out, haul-away and new wood privacy fence

$3,405–$8,650

Removing the old fence and its concrete footings costs $505–$1,600 on top of the $2,900–$7,050 for the new one, about $5,345 in all. Old footings in the way often mean new post holes offset a few inches, which is normal.

Fence a full backyard: 200 ft of wood privacy with two walk gates

$4,280–$10,860

200 ft at about $30 a foot plus two gates at $430 each comes to about $6,860 in Philadelphia. Gates are the part that sags first, so ask for steel-framed gate kits and adjustable hinges.

Pool fence: 60 ft of 4–5 ft aluminum with a self-closing gate, permitted

$1,602–$4,410

60 ft at $42 a foot plus a $52–$510 permit is about $2,655. Pool barriers must be at least 48 in. tall with a self-closing, self-latching gate that opens away from the pool, and almost every city inspects them.

Storm repair: 3 blown-down sections and 2 rotted posts

$765–$2,750

Three 8 ft sections rebuilt at $355 each and two posts reset in concrete at $245 each is about $1,540. If more than a third of the posts are rotted at ground level, price a full replacement ($2,900–$7,050) instead.

How much does a fence cost in Philadelphia?

Between $2,900 and $7,050 for 150 ft of 6 ft pressure-treated privacy fence, and $4,500 is the price most Philadelphia homeowners pay. About half is materials — roughly 19 posts, 38 rails, 300 pickets and 40 bags of concrete — and half is two or three days of a crew's labor at $46–$95 an hour.

Per foot, Philadelphia fences run $19–$47 for pressure-treated wood, $30–$60 for cedar, $26–$60 for vinyl, $13–$31 for chain link and $32–$105 for wrought iron. Figures re-checked against 17 sources in November 2026.

Fence prices in Philadelphia (2026): by material, per linear foot

Wood privacy fence costs $19–$47 a linear foot installed in Philadelphia, vinyl $26–$60, chain link $13–$31 and aluminum $26–$60.

Line on the quoteLowTypicalHigh
Wood privacy, 6 ft, pressure-treated pine$19$30$47
Cedar privacy, 6 ft$30$42$60
Wood picket, 3–4 ft$16$27$42
Vinyl privacy, 6 ft$26$42$60
Chain link, 4 ft galvanized$13$21$31
Aluminum ornamental, 4 ft$26$42$60
Wrought iron or steel, 5–6 ft$32$53$105
Composite privacy, 6 ft$31$47$65

Wood or vinyl in Philadelphia: 150 ft of pressure-treated privacy fence is $4,500 typical and the same run in vinyl is $6,300, about $1,800 more. Vinyl skips the $660–$2,250 staining bill every two or three years, so over 20 years the gap closes.

What moves a fence quote in Philadelphia:

  • Material — per foot, pressure-treated wood is $19–$47, vinyl $26–$60, chain link $13–$31, aluminum $26–$60, wrought iron $32–$105.
  • Height — 8 ft runs $32–$80 a foot against $19–$47 for 6 ft, needs longer posts set deeper, and usually a permit.
  • The old fence — tear-out and disposal adds $3–$11 a foot, $505–$1,600 for 150 ft, more if the old posts are in concrete.
  • Ground and access — rock, roots, slopes and hand-dug holes next to gas or sprinkler lines add time; so does carrying 300 pickets through a side gate.
  • Gates, permits and surveys — a walk gate is $215–$730, a driveway gate $845–$4,150, a permit $52–$510 where one is needed, and a boundary survey $335–$1,050 if the line is in doubt.

Ask every Philadelphia fence company the same five things: post size and depth, how much concrete per post, picket thickness and grade, whether tear-out and haul-away are included, and the warranty on posts and gates. Compare those, not the headline price. Get a quote for your fence job →

Fence Cost in Philadelphia by Length and Material

Quick answer

100 ft of wood privacy fence: $1,950–$4,700. 150 ft: $2,900–$7,050. 200 ft: $3,850–$9,400. 300 ft: $5,800–$14,100. The same 150 ft in vinyl is $3,900–$9,000, in cedar $4,500–$9,000, in chain link $1,950–$4,650.

Worked example: a typical Philadelphia quarter-acre lot has about 200 ft of back and side fence line. In 6 ft pressure-treated wood that is about $6,000, plus two walk gates at $430 each, so roughly $6,860. If the old fence has to come out first, add $1,200.

Material moves the total more than length does. The same 200 ft in vinyl is about $8,400 and in 4 ft chain link about $4,200, which is why two quotes for one yard can look nothing alike until you line up what each one is made of.

Philadelphia Fence Costs by Material and Type

Fence typeCostBest for
Wood privacy fence (pressure-treated pine), 6 ft$19–$47 per linear ftThe standard backyard fence and the cheapest solid screen. Lasts 15–20 years with staining every 2–3 years.
Cedar privacy fence, 6 ft$30–$60 per linear ftRot- and insect-resistant without chemicals and looks better as it grays. Lasts 20–30 years.
Wood picket fence, 3–4 ft$16–$42 per linear ftFront yards and curb appeal, where most cities cap height at 3–4 ft anyway.
Vinyl (PVC) privacy fence, 6 ft$26–$60 per linear ftNo staining, no rot, a hose-down once a year. Costs more up front and lasts 25–40 years.
Chain-link fence, 4 ft galvanized$13–$31 per linear ftDog yards, side yards and budgets. Black vinyl-coated 6 ft chain link runs $19–$41 per ft.
Aluminum ornamental fence, 4 ft$26–$60 per linear ftPool enclosures and front yards that need to stay open. Never rusts; the look of iron at a lower price.
Wrought iron or steel ornamental, 5–6 ft$32–$105 per linear ftSecurity and a formal look. Heavy, strong, and needs repainting every few years to stop rust.
Composite privacy fence, 6 ft$31–$65 per linear ftThe look of wood with vinyl's upkeep. The priciest common privacy material.
Corrugated steel panel privacy fence, 6 ft$27–$57 per linear ftA modern look that stands up to wind and termites; popular in the Southwest and Texas.
Split-rail fence, 2 or 3 rails$11–$31 per linear ftBig lots and property lines where you mark the edge, not screen it. Add wire mesh for dogs.
Pool fence (aluminum, 4–5 ft, self-closing gate)$26–$65 per linear ftMeeting the pool-barrier code: 48 in. tall or more, no gaps a 4 in. ball passes, self-closing, self-latching gate. Glass runs $105–$410 per ft.
Concrete block (CMU) wall, 6 ft, stucco$65–$165 per linear ftThe standard yard wall in Phoenix, Las Vegas and much of Southern California: fireproof, termite-proof, lasts 50+ years.
Cost by fence type in PhiladelphiaTypical range, per linear ft.
Wood privacy fence (pressure-treated pine), 6 ft $19–$47per linear ft
Cedar privacy fence, 6 ft $30–$60per linear ft
Wood picket fence, 3–4 ft $16–$42per linear ft
Vinyl (PVC) privacy fence, 6 ft $26–$60per linear ft
Chain-link fence, 4 ft galvanized $13–$31per linear ft
Aluminum ornamental fence, 4 ft $26–$60per linear ft
Wrought iron or steel ornamental, 5–6 ft $32–$105per linear ft
Composite privacy fence, 6 ft $31–$65per linear ft
Corrugated steel panel privacy fence, 6 ft $27–$57per linear ft
Split-rail fence, 2 or 3 rails $11–$31per linear ft
Pool fence (aluminum, 4–5 ft, self-closing gate) $26–$65per linear ft
Concrete block (CMU) wall, 6 ft, stucco $65–$165per linear ft
Philadelphia tip: before any quote, find your property pins or order a survey ($335–$1,050). A fence built a foot over the line is the most expensive fence there is, because it comes down.

Materials vs. what you pay — the Philadelphia fence bill

At a big-box store, a pressure-treated dog-ear picket is about $2.98, a 4x4x8 post about $14 and a 50 lb bag of concrete about $6. For 150 ft of 6 ft privacy fence that is roughly $1,800–$4,200 of materials inside a $2,900–$7,050 job in Philadelphia. The difference pays for a crew of two or three for two or three days, the auger or hand digging, the truck, disposal and the warranty.

Labor is about half of a wood fence bill and a third of a vinyl one, which is why wood prices differ more by city than vinyl prices do. Where fence crews earn more, a wood fence costs more; a vinyl panel costs about the same in Philadelphia as anywhere else.

What's included in a Philadelphia fence quote (and what costs extra)

A standard quote covers marking the line, digging and setting posts in concrete, rails, pickets or panels, hardware, basic cleanup and a workmanship warranty. The headline price often leaves out:

  • Tearing out the old fence — $3–$11 a foot, $505–$1,600 for 150 ft
  • Gates — $215–$730 for a walk gate, $845–$4,150 for a double driveway gate
  • Permit and survey — $52–$510 for a permit where one is needed; $335–$1,050 for a boundary survey
  • Staining or sealing — $660–$2,250 for 150 ft, a few weeks after the fence goes up

Ask for post size, depth and concrete in writing, and for proof of liability insurance.

What Affects Fence Costs in Philadelphia

Material

Per linear foot in Philadelphia: pressure-treated wood $19–$47, cedar $30–$60, vinyl $26–$60, chain link $13–$31, aluminum $26–$60, composite $31–$65, wrought iron $32–$105. Material is the single biggest choice you make.

Height and length

Taller costs more per foot — 8 ft runs $32–$80 against $19–$47 for 6 ft — and longer costs less per foot, since setup and travel are spread over more posts. Front-yard fences are capped at 3–4 ft in most cities.

Site and access

Rock, tree roots, slopes and buried lines turn a 20-minute post hole into an hour. A side yard too narrow for a wheelbarrow means every picket is carried by hand.

Removing the old fence

Tear-out and disposal adds $3–$11 a linear foot, about $505–$1,600 for 150 ft. Posts set in concrete cost more to pull than posts in dirt.

Local rules and the property line

Fence permits and height limits are set by your city or county, not the state: most allow a 6 ft fence on a rear or side line without a permit and cap front yards at 3–4 ft, and taller fences need a permit or variance. Pool barriers follow the building code almost everywhere — at least 48 in. tall with a self-closing, self-latching gate — and are inspected. Ask the fence company for proof of insurance and, where your state licenses contractors, the license number.

Labor rates in Philadelphia

Fence erectors in the Philadelphia-Camden-Wilmington metro earn a median $59,530 a year in federal wage data, about 24% above the US median. Labor is about half of a wood fence bill, so Philadelphia prices land about 7% above the US typical of $4,200 for 150 ft.

Gates and extras

A walk gate is $215–$730, a manual double driveway gate $845–$4,150 and an automatic opener $1,050–$4,600 more. Staining a new wood fence runs $660–$2,250 for 150 ft and should wait a few weeks for the wood to dry.

How to Save Money on a Fence in Philadelphia
  1. Share the line with your neighbor.A boundary fence serves two yards. Splitting $4,500 two ways is the single biggest saving there is, and many neighbors agree to it in writing before work starts.
  2. Price the whole line in one job.Per foot, a 200 ft fence costs less than a 100 ft one because the crew's setup, travel and disposal are spread over more posts. Do all sides at once.
  3. Pick the material for the job, not the look.Chain link ($13–$31 a foot) fences a dog yard for a third of the price of wood; wood ($19–$47) screens a backyard for less than vinyl ($26–$60); vinyl saves the $660–$2,250 staining bill every few years.
  4. Do the tear-out yourself.Pulling the old pickets and rails yourself saves $505–$1,600 on 150 ft. Leave posts in concrete to the crew unless you have a jack and a strong back.
  5. Book the slow season.Fence crews in Philadelphia are busiest from spring through early fall. Late fall and winter quotes are often lower where the ground is workable. Here the ground freezes, so the window is before the frost sets in.
  6. Get post depth and concrete in writing.Two quotes $1,600 apart on the same 150 ft usually differ on posts, not pickets: 4x4 posts set 2 ft deep in concrete every 8 ft against posts in dirt every 10 ft. Make both quotes say the same thing.
Fence Cost in Philadelphia: What the Quote Should Include

Philadelphia fence companies quote by the linear foot, with gates and tear-out as separate lines. Before you pay a deposit, get these in writing:

  • The exact length in feet, the height, and a drawing showing the line and gate positions
  • Material, grade and thickness: post size, rail count, picket thickness, panel brand for vinyl
  • Post depth, spacing, and how much concrete per post
  • Whether the old fence is torn out and hauled away, and the dump fee
  • Gates as separate lines: size, hardware, and the frame material
  • Who pulls the permit, who locates underground utilities (811), and who finds the property pins
  • Proof of liability insurance, and the license or registration number where your state has one
  • Start and finish dates, payment stages, and the warranty on posts, panels and gates
Frequently asked questions — Fence installation cost in Philadelphia
How much does a fence cost in Philadelphia?

$2,900–$7,050 to install 150 ft of 6 ft wood privacy fence, pressure-treated pine with posts in concrete, and $4,500 is typical. That is about $19–$47 a linear foot.

How much does a fence cost per linear foot in Philadelphia?

Installed: wood privacy $19–$47, cedar $30–$60, vinyl $26–$60, 4 ft chain link $13–$31, aluminum $26–$60, wrought iron $32–$105, composite $31–$65.

How much does a vinyl fence cost in Philadelphia?

$26–$60 a linear foot for 6 ft vinyl privacy, or $3,900–$9,000 for 150 ft. It costs more than wood up front but never needs staining.

How much does a chain-link fence cost in Philadelphia?

$13–$31 a foot for 4 ft galvanized ($1,950–$4,650 for 150 ft) and $19–$41 a foot for 6 ft black vinyl-coated.

How much does fence repair cost in Philadelphia?

About $165–$635 to rebuild one 8 ft section (boards and a rail) and $135–$425 to replace a post set in concrete. Three sections and two posts after a storm is about $1,540.

How much does it cost to remove an old fence in Philadelphia?

$3–$11 a linear foot including haul-away, about $505–$1,600 for 150 ft. Posts set in concrete cost more to pull.

Do I need a permit to build a fence in Pennsylvania?

Fence permits and height limits are set by your city or county, not the state: most allow a 6 ft fence on a rear or side line without a permit and cap front yards at 3–4 ft, and taller fences need a permit or variance. Pool barriers follow the building code almost everywhere — at least 48 in. tall with a self-closing, self-latching gate — and are inspected. Ask the fence company for proof of insurance and, where your state licenses contractors, the license number.

How much does a gate cost in Philadelphia?

A 4 ft walk gate is $215–$730 installed, a manual double driveway gate $845–$4,150, and an automatic opener adds $1,050–$4,600.

How deep should fence posts go?

About a third of the above-ground height, so 2 ft for a 6 ft fence, and below the frost line where the ground freezes — around 3 ft here. Each post sits in 1–2 bags of concrete; posts set in dirt are the most common reason a fence leans in five years.

Who pays for a fence between neighbors in Pennsylvania?

In most states, a fence on the line is shared property once both neighbors use it, but there is no duty to split the cost of a new one unless local law or an agreement says so. Get any cost-sharing deal in writing before work starts. This is general information, not legal advice.

Prices verified November 2026 · Cross-referenced against 17+ American pricing sources · See methodology

Prices for the Philadelphia metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, dated city price pages, fence company price lists, big-box material prices and federal wage data. No fence company can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read our full methodology →

Get a fair fence installation quote in Philadelphia

Local fence companies · Free quotes · No obligation, no spam.

Get quotes in Philadelphia →Max 2 fence companies will contact you
Get quotes in PhiladelphiaMax 2 fence companies · free · no spam→