How much does drywall cost in Philadelphia?
By Our research team · Last verified · Methodology
Drywalling a 12×12 room in Philadelphia costs $805–$1,900 per room, walls and ceiling. Most homeowners here pay about $1,250. A small patch is $75–$250; water-damage repair $300–$2,000.
How we get this data- Typical
- $1,250
- Low end
- $555
- High end
- $3,000
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local drywall contractors send you a real quote. Free, no obligation.
Get my fair quote →The typical Philadelphia price is $1,250, in line with the US typical of $1,250.
Philadelphia's price band
Philadelphia is pricier than 58% of the 195 US metros we price for drywall work.
Expect $1.50–$3.20 per sq ft to hang and finish new drywall in Philadelphia, $150–$455 to patch a large hole, $150–$455 per 100 sq ft to scrape a popcorn ceiling, and $1,200–$3,800 to drywall a two-car garage. Drywall contractors here charge about $45–$100 an hour.
Angi's 2026 Philadelphia figure for a drywall installation project is $2,095 on average ($1,077–$3,118), which it calls right on the US average, with labor $0.90–$2 per sq ft. Pennsylvania law requires home improvement contractors to register with the Attorney General's office, so ask for the registration number. Most pre-1940 homes here have plaster-and-lath walls, which cost more to patch than drywall.
Prices on this page include labor and materials to a paint-ready finish unless the row says otherwise; paint and primer are extra. Many Philadelphia companies charge a $125–$200 minimum for a single small patch.
Comparing cities, or after the US-wide picture? See the national guide: Drywall cost in the USA.
$805–$1,900 to hang and finish drywall in one 12×12 room in Philadelphia, labor and materials — typically $1,250. That's $1.50–$3.20 per sq ft or $50–$100 a sheet; a small hole patch is $75–$250 and water-damage repair $300–$2,000. Verified November 2026. Get free Philadelphia quotes →
- One 12×12 room hung and finished: $805–$1,900 ($1,250 typical)
- Per sq ft $1.50–$3.20; per sheet $50–$100
- Small hole $75–$250; large hole $150–$455; water damage $300–$2,000
- Skim coat $1.00–$3.00 per sq ft; popcorn removal $150–$455 per 100 sq ft
- Priciest area to work in: Center City & Fishtown; lowest quotes: South Philly, Delco & the suburbs
Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology
Installed prices include labor and materials to a paint-ready finish; repairs are per job including the visit. Philadelphia metro, re-verified November 2026.
| Service | Low | Typical | High |
|---|---|---|---|
| Hang and finish drywall, one 12×12 room (walls and ceiling, about 500 sq ft)per room | $805per room | $1,250 | $1,900 |
| Drywall contractor hourly rate/hr | $45/hr | $70 | $100 |
| Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)per 100 sq ft | $150per 100 sq ft | $225 | $320 |
| Level 5 smooth finish on new drywall, per 100 sq ftper 100 sq ft | $175per 100 sq ft | $275 | $350 |
| One 4×8 sheet of 1/2-inch drywall, hung and finishedper sheet | $50per sheet | $70 | $100 |
| Small hole or dent repair (under 4 in.), one visitper job | $75per job | $150 | $250 |
| Large hole repair (6–12 in., new piece let in and finished)per job | $150per job | $275 | $455 |
| Cracks, nail pops and seam repairper job | $100per job | $200 | $405 |
| Water-damaged drywall: cut out, replace and finishper job | $300per job | $905 | $2,000 |
| Ceiling drywall repair (sag, stain or hole)per job | $250per job | $605 | $1,200 |
| Replace a 12×12 room ceiling: tear out, new drywall, finishedper room | $505per room | $905 | $1,500 |
| Skim coat existing walls to a smooth finish, per 100 sq ftper 100 sq ft | $100per 100 sq ft | $130 | $300 |
| Skim coat one 12×12 room, walls onlyper room | $405per room | $555 | $805 |
| Wall texture (orange peel, knockdown, skip trowel), per 100 sq ftper 100 sq ft | $80per 100 sq ft | $130 | $200 |
| Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ftper 100 sq ft | $150per 100 sq ft | $250 | $455 |
| Corner bead repair or replacement (one damaged outside corner)per corner | $75per corner | $150 | $300 |
| New partition wall, framed and drywalled both sides (8 ft high), per linear ftper linear ft | $25per linear ft | $45 | $80 |
| Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installedper 100 sq ft | $350per 100 sq ft | $530 | $755 |
| Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installedper 100 sq ft | $175per 100 sq ft | $250 | $350 |
| Drywall a 2-car garage, walls and ceiling (5/8-inch fire-rated where code requires)per garage | $1,200per garage | $2,200 | $3,800 |
| Drywall a whole 2,000 sq ft house (about 7,000 sq ft of board), hung and finishedper house | $9,050per house | $15,100 | $28,200 |
| Remove and dispose of old drywall, per 100 sq ftper 100 sq ft | $50per 100 sq ft | $100 | $200 |
| Plaster wall or ceiling repair (cracks, holes, loose plaster)per job | $150per job | $405 | $1,200 |
| Drywall crew day rate (two people, materials extra)per day | $705per day | $1,100 | $1,600 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local drywall contractors in Philadelphia
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need a price on?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the drywall contractors who reply.
Where should they text you?
- Max 2 drywall contractors. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched drywall contractors see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 drywall contractors about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology
Prices cover the Philadelphia metro. Outlying towns can run 5–10% lower; older homes in Center City & Fishtown sit at the top of each range.
Drywall prices across Philadelphia
Where you live in the metro changes the labor, not the board. Older homes in Center City & Fishtown take the longest; jobs in South Philly, Delco & the suburbs tend to come in at or under the city typical.
Center City & Fishtown
- Per 12×12 room
- $870–$2,150 per room
- Typical repair
- $160–$510 / large hole patch
Older buildings, parking and elevators slow every visit, and where the walls are plaster rather than drywall, patches take longer and cost more.
North Philly
- Per 12×12 room
- $830–$2,000 per room
- Typical repair
- $155–$480 / large hole patch
A mix of older homes and new infill. Older houses here often have textured or much-patched walls, which push a repair toward the top of the range.
West & Southwest Philly
- Per 12×12 room
- $805–$1,900 per room
- Typical repair
- $150–$455 / large hole patch
Mostly post-war houses with drywall throughout, so repairs are quick and quotes cluster around the city typical.
South Philly, Delco & the suburbs
- Per 12×12 room
- $805–$1,950 per room
- Typical repair
- $150–$470 / large hole patch
Newer homes with easy access and drywall throughout. Visits are quick; the bigger bills are garages, additions and whole-house repaints after a skim coat.
Real-World Drywall Costs in Philadelphia
Here's what common drywall jobs cost in Philadelphia in 2026, labor and materials to a paint-ready finish.
Doorknob hole in a bedroom wall — 1 visit, 1–2 hours
Cut a clean square, screw in a backer, let in a patch, tape and mud in two or three coats, sand. Most Philadelphia companies charge their $125–$200 minimum for a single patch, so add other holes to the same visit.
Ceiling stain and sag after a bathroom leak
Water-damaged board cut out and replaced ($300–$2,000) plus the ceiling repair and texture match ($250–$1,200). Fix the leak first; the drywall company won't warranty a patch under a live drip.
Drywall one 12×12 room (garage conversion, addition or basement) — 2–4 days
Walls and ceiling hung and finished to Level 4 for $1,250 typical, about 15 sheets. Moisture-resistant board for a bathroom or basement adds about $25 per 100 sq ft; paint is separate.
Scrape a popcorn ceiling in a living room (about 300 sq ft)
Scrape, skim smooth and prime at $150–$455 per 100 sq ft. In a home built before 1980, a lab test ($30–$75) comes first; if it's positive, abatement is a different trade at a much higher price.
Skim coat a textured bedroom smooth
Two thin coats of compound over the walls of a 12×12 room, sanded to Level 5, at $1.00–$3.00 per sq ft. The ceiling adds $100–$150 per 100 sq ft, and new paint is a must afterwards.
How much does drywall cost in Philadelphia?
Between $805 and $1,900 for one 12×12 room, walls and ceiling, hung and finished ready for paint, and $1,250 is the price most Philadelphia homeowners pay. The board is cheap: about $10–$20 a sheet, or $200–$400 in materials for the whole room. The rest is two or three visits by a hanger and a finisher, and the finishing is what you're paying for.
Bigger jobs scale by the square foot: $1,200–$3,800 for a two-car garage, $9,050–$28,200 for a whole 2,000 sq ft house. Skim-coating existing walls smooth is $1.00–$3.00 per sq ft, about half the price of new board. Figures re-checked against 83 sources in November 2026.
Drywall prices in Philadelphia (2026): new board, repairs and finishes
Hang and finish costs $1.50–$3.20 per sq ft in Philadelphia, a small hole patch $75–$250, and a skim coat $1.00–$3.00 per sq ft.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials) | $150 | $225 | $320 |
| One 4×8 sheet of 1/2-inch drywall, hung and finished | $50 | $70 | $100 |
| Small hole or dent repair (under 4 in.), one visit | $75 | $150 | $250 |
| Large hole repair (6–12 in., new piece let in and finished) | $150 | $275 | $455 |
| Water-damaged drywall: cut out, replace and finish | $300 | $905 | $2,000 |
| Replace a 12×12 room ceiling: tear out, new drywall, finished | $505 | $905 | $1,500 |
| Skim coat existing walls to a smooth finish, per 100 sq ft | $100 | $130 | $300 |
| Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft | $150 | $250 | $455 |
Repair or replace in Philadelphia: a wall with a few holes is a $150–$455 patch job; a wall with old texture or dozens of nail pops is a $1.00–$3.00 per sq ft skim coat; only a wall that is crumbling, moldy or wet through needs new board at $1.50–$3.20 per sq ft.
What moves a drywall quote in Philadelphia:
- Finish level — Level 4 for painted walls is $1.50–$3.20 per sq ft; a Level 5 smooth finish $1.75–$3.50.
- Ceilings and height — ceiling board is slower to hang; rooms over 8–10 ft add about 10–30%.
- Board type — moisture-resistant board is $175–$350 per 100 sq ft installed; soundproof $350–$755.
- Texture — matching orange peel or knockdown adds $80–$200 per 100 sq ft; scraping popcorn $150–$455.
- Minimum charge — a single small patch costs $75–$250 because most companies charge a $125–$200 minimum visit.
Ask every Philadelphia company for the same five things: the finish level by number, whether primer is included, who hauls the debris, how texture will be matched, and the minimum charge. Compare those, not the headline price. Get a quote for your drywall job →
Drywall Cost in Philadelphia by Room and Project Size
One 12×12 room: $805–$1,900. Two-car garage, walls and ceiling: $1,200–$3,800. Whole 2,000 sq ft house: $9,050–$28,200. Per sheet: $50–$100 hung and finished.
Worked example: a Philadelphia living room of about 300 sq ft of wall with a popcorn ceiling. Scraping and re-skimming the ceiling at $250 per 100 sq ft is about $750, and skim-coating the walls smooth at $130 per 100 sq ft about $390, so roughly $1,140 before paint. A lab test for asbestos ($30–$75) comes first in a home built before 1980.
Whole-house math: a 2,000 sq ft house has about 7,000 sq ft of wall and ceiling. At $1.50–$3.20 per sq ft that is $9,050–$28,200 hung and finished, which is why a gut remodel's drywall line is one of its biggest. Booking the drywall and paint crews back to back saves a second round of floor protection and cleanup.
Philadelphia Drywall Costs by Board and Finish Type
| Board or finish type | Cost | Best for |
|---|---|---|
| Standard 1/2-inch drywall | $150–$320 per 100 sq ft | Walls in living rooms, bedrooms and hallways. The sheet itself is $10–$20; most of the price is hanging and finishing. |
| 5/8-inch Type X fire-rated | $13–$30 per sheet (board only) | Required on a garage ceiling under living space; common on the garage wall shared with the house (the code minimum there is 1/2-inch) and in furnace rooms. Heavier and stiffer, so it also resists sag on ceilings. |
| Moisture- and mold-resistant (green or purple board) | $175–$350 per 100 sq ft installed | Bathrooms, laundry rooms, basements and garages. Not a tile backer inside a shower; that needs cement board. |
| Soundproof (QuietRock or double layer) | $350–$755 per 100 sq ft installed | Bedroom walls next to a living room, home offices, shared walls in a duplex. The sheet alone is $30–$100. |
| Lightweight 1/2-inch (UltraLight) | $150–$320 per 100 sq ft | Ceilings and DIY jobs: lighter than regular 1/2-inch board at the same price, so it is easier to lift overhead. |
| Level 5 smooth finish | $175–$350 per 100 sq ft | Walls that get glossy paint, dark colors or raking light from big windows. A thin skim coat over the whole sheet hides every joint. |
| Skim coat over existing walls | $100–$300 per 100 sq ft | Smoothing textured or damaged walls without tearing them out. Cheaper than new drywall when the old board is sound. |
| Plaster (repair or veneer) | $150–$1,200 per repair | Pre-1950 homes with plaster-and-lath walls. Patching plaster costs more per square foot than drywall; replacing it with drywall is a bigger job. |
Board price vs. what you pay — the Philadelphia drywall bill
A 4×8 sheet of 1/2-inch drywall costs $10–$20 at the store, and all the materials for a 12×12 room run $200–$400, but the room hung and finished in Philadelphia is $805–$1,900. The difference pays for a hanger, a finisher who comes back two or three times as coats dry, sanding, cleanup and a warranty on cracks.
Hanging board is the easy half and the one DIYers can do; a $40-a-day lift rental makes ceilings possible. Taping and finishing is the skilled half: a poor Level 4 job shows every joint once the paint goes on. If you do anything yourself, hang it and hire the finish at about $0.50–$1.50 per sq ft.
What's included in a Philadelphia drywall quote (and what costs extra)
A standard installed price covers the board, screws, tape, corner bead and joint compound, hanging, taping, three coats of mud, sanding to the finish level named, and a sweep-out. The headline price often leaves out:
- Primer and paint — a separate trade in most Philadelphia quotes; even a bare-minimum coat of primer is extra unless listed
- Debris haul-away — $300–$500 to dispose of old drywall from a room, or $50–$200 per 100 sq ft to tear out and remove
- Texture — $80–$200 per 100 sq ft to apply or match; a Level 5 skim is $1.75–$3.50 per sq ft
- Asbestos or lead testing — $30–$75 for a mail-in texture sample, $250–$850 for a professional survey, in homes built before 1980
Ask how long the company warranties cracks and nail pops; good finishers put a year in writing.
Finish level
Level 4, the standard for painted walls, is $1.50–$3.20 per sq ft in Philadelphia; Level 5, a full skim coat for glossy paint or strong light, is $1.75–$3.50. Level 3 is only for heavy texture. Get the level written on the quote.
Ceilings, height and access
Ceiling board is heavier to hang and slower to finish; a 12×12 ceiling replaced runs $505–$1,500. Rooms over 8–10 ft add about 10–30%, and stairwells need scaffolding.
Repair size and count
A small hole is $75–$250, a large one $150–$455, cracks and nail pops $100–$405. Several small repairs on one visit cost far less than three separate calls at the $125–$200 minimum.
Water damage and mold
Cutting out wet board and replacing it is $300–$2,000. If mold has set in behind the wall, remediation is a separate trade at $1,500–$3,000 per 100 sq ft, and the leak has to be fixed first.
Local rules
A like-for-like drywall repair or replacement in Philadelphia usually needs no permit; a permit ($50–$150 where needed) comes in when walls move, the work is the garage-to-house separation or a remodel is already permitted. In homes built before 1978, a contractor who disturbs painted surfaces must follow the federal lead-safe rule, and texture or joint compound from before about 1980 should be tested for asbestos before sanding.
Labor rates in Philadelphia
Labor is about 70% of the bill. Philadelphia is a large metro with mid-range construction prices; a room of drywall here is in line with the US typical of $1,250. Drywall contractors here charge about $45–$100 an hour, with a $125–$200 minimum for small repairs.
Texture and old finishes
Matching texture adds $80–$200 per 100 sq ft; scraping popcorn $150–$455. Plaster walls in older Philadelphia homes cost more to patch ($150–$1,200) than drywall, and a full skim coat over them is $1.00–$3.00 per sq ft.
- Bundle the small repairs.Most Philadelphia companies charge a $125–$200 minimum. One visit for five holes costs about the same as one visit for one hole.
- Specify Level 4, not Level 5.Level 4 ($1.50–$3.20 per sq ft) is right for flat and eggshell paint. Pay for Level 5 ($1.75–$3.50) only where glossy paint or raking light will show joints.
- Skim instead of replacing.Sound walls with ugly texture or lots of nail pops can be skim-coated for $1.00–$3.00 per sq ft, about half the price of new board, and with no demolition dust.
- Hang it yourself, hire the finish.Materials for a 12×12 room are $200–$400 and a lift rents for about $40 a day. Then pay a finisher about $0.50–$1.50 per sq ft for the part that shows.
- Fix the leak before the drywall.A $300–$2,000 water-damage repair under a live leak will be back in a month. Plumber or roofer first, drywall second, and keep the repair receipts for insurance.
- Get the finish level and extras in writing.Primer, texture matching, debris haul-away and moving furniture are the usual add-ons. A quote that lists them is cheaper to compare and harder to pad later.
Philadelphia drywall companies often quote by the sheet or the square foot over the phone. Before you agree to the work, get these in writing:
- The finish level by number (Level 4 for paint; Level 5 for smooth or glossy walls)
- Board type and thickness for each room: 1/2-inch, 5/8-inch fire-rated, moisture-resistant, soundproof
- Square footage or sheet count the price is based on
- Whether primer is included, and who paints
- Texture: match existing, apply new, or leave smooth
- Demolition, debris haul-away and floor protection
- Minimum charge and the number of visits (hanging, coats, sanding)
- Warranty on cracks, nail pops and seams
How much does drywall cost in Philadelphia?
$805–$1,900 to hang and finish one 12×12 room, labor and materials, and $1,250 is typical. That's $1.50–$3.20 per sq ft, or $50–$100 a sheet.
How much does drywall repair cost in Philadelphia?
$75–$250 for a small hole, $150–$455 for a large one, $100–$405 for cracks and nail pops, and $300–$2,000 for water damage. Most companies charge a $125–$200 minimum per visit.
What does drywall cost per square foot in Philadelphia?
$1.50–$3.20 per sq ft hung and finished to Level 4, labor and materials. Level 5 smooth is $1.75–$3.50; skim-coating existing walls $1.00–$3.00.
How much does it cost to fix a ceiling in Philadelphia?
$250–$1,200 for a sag, stain or hole, and $505–$1,500 to tear out and replace a whole 12×12 room ceiling. Water damage with the repair runs $550–$3,200.
Can I hang drywall myself?
Hanging, yes: materials for a room are $200–$400 and a lift rents for about $40 a day. Finishing is the skilled part; most DIYers hire it out at about $0.50–$1.50 per sq ft.
How much does it cost to remove a popcorn ceiling in Philadelphia?
$150–$455 per 100 sq ft to scrape, skim and prime an asbestos-free ceiling. Test first in any home built before 1980 ($30–$75 by mail); asbestos abatement costs far more.
How much is a skim coat in Philadelphia?
$1.00–$3.00 per sq ft, or $405–$805 for the walls of a 12×12 room. It smooths texture and small damage without new board, but the room must be repainted after.
Do I need a permit for drywall?
A like-for-like drywall repair or replacement in Philadelphia usually needs no permit; a permit ($50–$150 where needed) comes in when walls move, the work is the garage-to-house separation or a remodel is already permitted. In homes built before 1978, a contractor who disturbs painted surfaces must follow the federal lead-safe rule, and texture or joint compound from before about 1980 should be tested for asbestos before sanding.
How much does it cost to drywall a garage or a whole house in Philadelphia?
$1,200–$3,800 for a two-car garage, walls and ceiling, with fire-rated board where the code requires it. A whole 2,000 sq ft house is $9,050–$28,200 hung and finished.
What's included in a Philadelphia drywall quote?
Board, tape, mud, hanging, finishing to the level named, and cleanup. Often extra: primer and paint, debris haul-away ($300–$500), texture ($80–$200 per 100 sq ft) and asbestos testing in older homes.
Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology
Prices for the Philadelphia metro area, November 2026. Outer suburbs may vary.
Get a fair drywall quote in Philadelphia
Local drywall contractors · Free quotes · No obligation, no spam.