Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Drywall cost / deep-diveVerified November 2026

How much do plaster repair and skim coating cost?

By Our research team · Last verified · 14 jobs priced · Methodology

Drywall cost

Plaster repair and skim coat cost in the US

United States
Get free quotesFree · no obligation · max 2 pros
Normal range across the US
$150–$1,200per job

Plaster wall or ceiling repair (cracks, holes, loose plaster). The full price list is below.

How we get this data
Typical
$400
Low
$150
High
$1,200
Jobs priced
14
Cities priced
195
Sources
83+
Verified
November 2026
Quick answer

$150–$1,200 to repair cracks, holes or loose plaster in 2026, and $1.00–$3.00 per square foot to skim-coat walls smooth, about $400–$800 for the walls of a 12×12 room. Plaster is priced by the square foot of damage, $22–$120, with a $50–$100 minimum visit. Replacing plaster with drywall runs $275–$600 per 100 sq ft.

  • Plaster repair $150–$1,200 per job; $22–$120 per sq ft of damage
  • Skim coat $1.00–$3.00 per sq ft; $400–$800 for a 12×12 room's walls; $5,500–$9,400 for a 1,500 sq ft house
  • Replaster a room's walls $800–$4,000; replace plaster with drywall $275–$600 per 100 sq ft
  • Plaster labor $55–$120 an hour, minimum visit $50–$100
  • Ceilings skim for $100–$150 per 100 sq ft; two coats or more adds 50–100%

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

01 / PricesUSA · November 2026

Plaster repair and skim coat prices (2026)

A plaster patch is $150–$1,200; a skim coat $1.00–$3.00 per sq ft. Per-100 sq ft rows: divide by 100 for the per-foot price.

Plaster repair and skim coat prices (2026)Per 100 sq ft, low to high with the typical price marked.
Replastering, new or resurfaced, per 100 sq ft $500$200–$1,000
Replace plaster with drywall (demolition and new board) $450$275–$600
Level 5 smooth finish on new drywall, per 100 sq ft $275$175–$350
Plaster demolition only $190$125–$250
Skim coat existing walls to a smooth finish, per 100 sq ft $130$100–$300
Skim coat ceilings $125$100–$150
JobLowTypicalHigh
Plaster wall or ceiling repair (cracks, holes, loose plaster)per job$150$400$1,200
Plaster repair, per square foot of damage (holes to water damage)per sq ft$22$70$100
Plaster ceiling repair, per square footper sq ft$80$100$120
Plaster contractor minimum visitper visit$50$75$100
Plaster laborper hour$55$85$120
Replaster the walls of one roomper room$800$2,000$4,000
Replastering, new or resurfaced, per 100 sq ftper 100 sq ft$200$500$1,000
Replace plaster with drywall (demolition and new board)per 100 sq ft$275$450$600
Plaster demolition onlyper 100 sq ft$125$190$250
Skim coat existing walls to a smooth finish, per 100 sq ftper 100 sq ft$100$130$300
Skim coat one 12×12 room, walls onlyper room$400$550$800
Skim coat ceilingsper 100 sq ft$100$125$150
Skim coat a whole 1,500 sq ft houseper house$5,500$7,500$9,400
Level 5 smooth finish on new drywall, per 100 sq ftper 100 sq ft$175$275$350

US prices, November 2026. Low is a simple job in a low-cost area; high is a bigger job or a high-cost city.

02 / By city195 cities priced

Does plaster repair and skim coat cost change by city?

Yes. The same job costs more where labor and rent cost more. Here's how drywall prices in the biggest US metros compare with the US typical of $1250.

Drywall prices in the 12 biggest US metrosEach city's typical drywall price against the US typical of $1,250.
New York, NY 16% more
Boston, MA 8% more
Los Angeles, CA 4% more
Washington, DC 4% more
Atlanta, GA 4% more
Houston, TX 4% less
Miami, FL 4% less
Phoenix, AZ 8% less
Dallas, TX 12% less

Labor, rent and demand move every job on this page in the same direction. Open your city's guide for its full local price list.

03 / The guide5 parts

What to know before you book

Compare

Plaster or drywall: which do you have?

Homes built before about 1950 mostly have plaster over wood or metal lath; after that, drywall took over. Plaster sounds solid when you knock, is cold and hard, and a push-pin won't go in easily. It also cracks in long lines, pulls away from the lath in bulges, and costs more to patch because each repair is built up in layers that cure, not just sanded.

That is why plaster is priced per square foot of damage, $22 for holes and $30 for cracks up to $100 for water damage and $100–$120 on ceilings, with a $50–$100 minimum visit. A typical repair call lands at $150–$1,200.

Compare

Repair, skim or replace plaster?

Cracks and a few holes: repair at $150–$1,200. Walls that are sound but ugly, with hairline cracks everywhere or old wallpaper glue: skim-coat at $1.00–$3.00 per sq ft, about $400–$800 for a room. Plaster that is loose, bulging or soft over large areas: either replaster ($800–$4,000 for a room's walls) or tear it out and hang drywall at $275–$600 per 100 sq ft.

Replacing plaster with drywall is the bigger, dirtier job, but it also opens the walls for new wiring and insulation; the demolition alone is $125–$250 per 100 sq ft. Replastering keeps the look and the sound-deadening of real plaster and costs $200–$1,000 per 100 sq ft.

What a skim coat is and what it fixes

A skim coat is one or two thin layers of joint compound troweled over the whole wall and sanded flat, $1.00–$3.00 per sq ft on walls and $1.00–$1.50 on ceilings. It erases orange peel and knockdown texture, wallpaper damage, dozens of nail pops and old paint ridges without any demolition.

It does not fix wet, soft or loose walls, and it does not stop cracks caused by movement. Expect a $400–$800 room to need more than two coats, and 50–100% more, if the texture is heavy. Every skim-coated room must be primed and repainted.

Level 5 on new drywall

On new board, a skim coat is what turns a Level 4 finish into Level 5, $1.75–$3.50 per sq ft against $1.50–$3.20. It is worth paying for under glossy or dark paint, in rooms with big windows that light the wall from the side, and in hallways with long unbroken walls.

Ask for it by number. A finisher who hears 'smooth' will deliver Level 4; a quote that says Level 5 is a contract.

Watch out

Red flags and safety

Any home with plaster is old enough for lead paint (1978 and earlier), so a contractor who sands or scrapes must follow the federal lead-safe work rule: plastic, HEPA vacuums and no dry sanding. Ask to see the certification. Old patching compounds and textures from before about 1980 can also contain asbestos; test before sanding.

A plaster ceiling that sags or has a bulge you can press is a safety issue, not a cosmetic one: plaster keys have broken and the ceiling can come down. Stop using the room and get it looked at.

04 / Check a quoteFree · no sign-up

Got a price? See if it's fair

Plaster wall or ceiling repair (cracks, holes, loose plaster)
Type the price you were quoted. We compare it with the US range of $150–$1,200 per job.

A different job, or got it as a PDF or photo? Use the full quote checker →

Free quotes

Get free quotes from up to 2 local drywall contractors

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need a price on?

Tap one to start.

05 / Questions5 answers

Plaster repair and skim coat cost: FAQ

How much does plaster repair cost?

$150–$1,200 for a typical repair call, priced at $22–$120 per square foot of damage with a $50–$100 minimum. Ceilings and water damage sit at the top.

How much does it cost to skim coat walls?

$1.00–$3.00 per sq ft, or $400–$800 for the walls of a 12×12 room and $5,500–$9,400 for a 1,500 sq ft house. Ceilings are $1.00–$1.50 per sq ft.

Is it cheaper to replace plaster with drywall or repair it?

Repairing is cheaper for cracks and holes ($150–$1,200). Replacing is $275–$600 per 100 sq ft and only pays when the plaster is loose or soft over large areas or you need the walls open for wiring.

Can you skim coat over textured walls?

Yes, if the wall is sound. Light texture needs one or two coats at $1.00–$3.00 per sq ft; heavy knockdown may need more coats and cost 50–100% more. Repaint afterwards.

Do plaster repairs need a lead-safe contractor?

If the home was built before 1978, yes: federal rules require certified lead-safe practices when painted surfaces are disturbed. Ask for the contractor's certification before any sanding or demolition.

Get drywall quotesMax 2 pros · free · no spam→