Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does drywall cost in Washington?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched11 min read
Drywall cost

Drywall costs in Washington

Washington, DCChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Washington, DC
$815–$1,950per room

Drywalling a 12×12 room in Washington costs $815–$1,950 hung and finished, labor and materials, with $1,300 the typical bill. Hang-and-finish runs $1.55–$3.25 per sq ft; a large hole patch $155–$460.

How we get this data
Typical
$1,300
Low end
$560
High end
$3,050
Per 12×12 room
$815–$1,950
Per sq ft (hang + finish)
$1.55–$3.25
Small hole patch
$75–$255
Water-damage repair
$305–$2,050

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local drywall contractors send you a real quote. Free, no obligation.

Get my fair quote →
Typical drywall price: Washington vs nearby citiesTypical price, per room. The line marks the US typical.
Baltimore, MD $1,350
Washington, DCThis guide $1,300
Richmond, VA $1,150

The typical Washington price is $1,300, 4% above the US typical of $1,250.

Where Washington sits among 195 US metrosNumber of metros at each typical drywall price, per room.

Washington's price band

Washington is pricier than 81% of the 195 US metros we price for drywall work.

Expect $1.55–$3.25 per sq ft to hang and finish new drywall in Washington, $155–$460 to patch a large hole, $155–$460 per 100 sq ft to scrape a popcorn ceiling, and $1,200–$3,850 to drywall a two-car garage. Drywall contractors here charge about $45–$100 an hour.

Washington-area drywall installers earn a median $59,070 a year (BLS, May 2025), right at the US median. Many DC rowhouses and older Maryland and Virginia suburbs have plaster walls, which cost more to patch than drywall. Maryland law allows only contractors licensed by the Home Improvement Commission to contract with homeowners for home improvement work, drywall included.

Installed prices include materials and labor to a paint-ready finish. Patches, water stains and ceilings are the jobs most Washington homeowners call about; new drywall for a whole room or house is priced by the square foot.

Comparing cities, or after the US-wide picture? See the national guide: Drywall cost in the USA.

Quick answer

$815–$1,950 to hang and finish drywall in one 12×12 room in Washington, labor and materials — typically $1,300. That's $1.55–$3.25 per sq ft or $50–$100 a sheet; a small hole patch is $75–$255 and water-damage repair $305–$2,050. Verified November 2026. Get free Washington quotes →

  • One 12×12 room hung and finished: $815–$1,950 ($1,300 typical)
  • Per sq ft $1.55–$3.25; per sheet $50–$100
  • Small hole $75–$255; large hole $155–$460; water damage $305–$2,050
  • Skim coat $1.00–$3.05 per sq ft; popcorn removal $155–$460 per 100 sq ft
  • Priciest area to work in: Downtown, Shaw & U Street; lowest quotes: Northern Virginia

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Detailed pricing — Drywall cost in Washington 2026

Installed prices include labor and materials to a paint-ready finish; repairs are per job including the visit. Washington metro, re-verified November 2026.

ServiceLowTypicalHigh
Hang and finish drywall, one 12×12 room (walls and ceiling, about 500 sq ft)per room$815per room$1,300$1,950
Drywall contractor hourly rate/hr$45/hr$70$100
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)per 100 sq ft$155per 100 sq ft$230$325
Level 5 smooth finish on new drywall, per 100 sq ftper 100 sq ft$180per 100 sq ft$280$355
One 4×8 sheet of 1/2-inch drywall, hung and finishedper sheet$50per sheet$70$100
Small hole or dent repair (under 4 in.), one visitper job$75per job$155$255
Large hole repair (6–12 in., new piece let in and finished)per job$155per job$280$460
Cracks, nail pops and seam repairper job$100per job$205$410
Water-damaged drywall: cut out, replace and finishper job$305per job$920$2,050
Ceiling drywall repair (sag, stain or hole)per job$255per job$615$1,250
Replace a 12×12 room ceiling: tear out, new drywall, finishedper room$510per room$915$1,550
Skim coat existing walls to a smooth finish, per 100 sq ftper 100 sq ft$100per 100 sq ft$135$305
Skim coat one 12×12 room, walls onlyper room$410per room$560$815
Wall texture (orange peel, knockdown, skip trowel), per 100 sq ftper 100 sq ft$80per 100 sq ft$130$205
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ftper 100 sq ft$155per 100 sq ft$255$460
Corner bead repair or replacement (one damaged outside corner)per corner$75per corner$155$305
New partition wall, framed and drywalled both sides (8 ft high), per linear ftper linear ft$25per linear ft$45$80
Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installedper 100 sq ft$355per 100 sq ft$530$760
Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installedper 100 sq ft$180per 100 sq ft$255$355
Drywall a 2-car garage, walls and ceiling (5/8-inch fire-rated where code requires)per garage$1,200per garage$2,250$3,850
Drywall a whole 2,000 sq ft house (about 7,000 sq ft of board), hung and finishedper house$9,150per house$15,250$28,500
Remove and dispose of old drywall, per 100 sq ftper 100 sq ft$50per 100 sq ft$100$205
Plaster wall or ceiling repair (cracks, holes, loose plaster)per job$155per job$410$1,250
Drywall crew day rate (two people, materials extra)per day$715per day$1,100$1,650
drywall jobs in Washington: what they costPer 100 sq ft, low to high with the typical price marked. Every line is in the table above.
Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installed $530$355–$760
Level 5 smooth finish on new drywall, per 100 sq ft $280$180–$355
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft $255$155–$460
Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installed $255$180–$355
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials) $230$155–$325
Skim coat existing walls to a smooth finish, per 100 sq ft $135$100–$305
Wall texture (orange peel, knockdown, skip trowel), per 100 sq ft $130$80–$205
Remove and dispose of old drywall, per 100 sq ft $100$50–$205
Already got a quote?
Check it against these Washington prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local drywall contractors in Washington

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need a price on?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Prices cover the Washington metro. Outlying towns can run 5–10% lower; older homes in Downtown, Shaw & U Street sit at the top of each range.

How drywall costs vary across Washington

Drywall prices across Washington

Where you live in the metro changes the labor, not the board. Older homes in Downtown, Shaw & U Street take the longest; jobs in Northern Virginia tend to come in at or under the city typical.

Drywall prices across WashingtonTypical range by part of the metro, per room. The line marks the Washington typical.
Downtown, Shaw & U Street8–12% above the city average $880–$2,200per room
Northeast & Southeast DCStandard pricing $815–$1,950per room
Prince George's CountyStandard to 6% above $840–$2,050per room
Northern VirginiaStandard; bigger rooms common $815–$2,000per room

Downtown, Shaw & U Street

8–12% above the city average
Downtown, Shaw, U Street, Navy Yard
Per 12×12 room
$880–$2,200 per room
Typical repair
$165–$515 / large hole patch

The priciest part of the metro for drywall work: tight access, building rules on dust and noise, and older walls that need more prep.

Northeast & Southeast DC

Standard pricing
Brookland, Anacostia, H Street, Deanwood
Per 12×12 room
$815–$1,950 per room
Typical repair
$155–$460 / large hole patch

Standard pricing for standard jobs. Driveway parking and easy access keep visits short.

Prince George's County

Standard to 6% above
Hyattsville, Largo, Silver Spring, Landover
Per 12×12 room
$840–$2,050 per room
Typical repair
$160–$490 / large hole patch

Renovated older homes next to new builds. Standard rates for new drywall; repairs in the older stock often turn into skim coats.

Northern Virginia

Standard; bigger rooms common
Arlington, Alexandria, Fairfax
Per 12×12 room
$815–$2,000 per room
Typical repair
$155–$475 / large hole patch

Bigger homes with more wall to cover: a two-car garage, a bonus room or an addition is a common job here, and high ceilings add 10% or more.

What you'll actually pay — job by job

Real-World Drywall Costs in Washington

Here's what common drywall jobs cost in Washington in 2026, labor and materials to a paint-ready finish.

Doorknob hole in a bedroom wall — 1 visit, 1–2 hours

$75–$255

Cut a clean square, screw in a backer, let in a patch, tape and mud in two or three coats, sand. Most Washington companies charge their $130–$205 minimum for a single patch, so add other holes to the same visit.

Ceiling stain and sag after a bathroom leak

$560–$3,300

Water-damaged board cut out and replaced ($305–$2,050) plus the ceiling repair and texture match ($255–$1,250). Fix the leak first; the drywall company won't warranty a patch under a live drip.

Drywall one 12×12 room (garage conversion, addition or basement) — 2–4 days

$815–$1,950

Walls and ceiling hung and finished to Level 4 for $1,300 typical, about 15 sheets. Moisture-resistant board for a bathroom or basement adds about $25 per 100 sq ft; paint is separate.

Scrape a popcorn ceiling in a living room (about 300 sq ft)

$465–$1,380

Scrape, skim smooth and prime at $155–$460 per 100 sq ft. In a home built before 1980, a lab test ($30–$75) comes first; if it's positive, abatement is a different trade at a much higher price.

Skim coat a textured bedroom smooth

$410–$815

Two thin coats of compound over the walls of a 12×12 room, sanded to Level 5, at $1.00–$3.05 per sq ft. The ceiling adds $100–$150 per 100 sq ft, and new paint is a must afterwards.

How much does drywall cost in Washington?

Drywalling a 12×12 room in Washington costs $815 to $1,950. The middle of the market, about $1,300, covers about 15 sheets of 1/2-inch board hung, taped, mudded and sanded to a Level 4 finish, with corner bead and cleanup. Painting is separate.

Old texture costs extra to deal with: $155–$460 per 100 sq ft to scrape and re-skim a popcorn ceiling, plus an asbestos test ($30–$75 by mail) in any home built before 1980. Re-checked against 83 sources in November 2026.

Drywall prices in Washington (2026): new board, repairs and finishes

Hang and finish costs $1.55–$3.25 per sq ft in Washington, a small hole patch $75–$255, and a skim coat $1.00–$3.05 per sq ft.

Line on the quoteLowTypicalHigh
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)$155$230$325
One 4×8 sheet of 1/2-inch drywall, hung and finished$50$70$100
Small hole or dent repair (under 4 in.), one visit$75$155$255
Large hole repair (6–12 in., new piece let in and finished)$155$280$460
Water-damaged drywall: cut out, replace and finish$305$920$2,050
Replace a 12×12 room ceiling: tear out, new drywall, finished$510$915$1,550
Skim coat existing walls to a smooth finish, per 100 sq ft$100$135$305
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft$155$255$460

Repair or replace in Washington: a wall with a few holes is a $155–$460 patch job; a wall with old texture or dozens of nail pops is a $1.00–$3.05 per sq ft skim coat; only a wall that is crumbling, moldy or wet through needs new board at $1.55–$3.25 per sq ft.

What moves a drywall quote in Washington:

  • Finish level — Level 4 for painted walls is $1.55–$3.25 per sq ft; a Level 5 smooth finish $1.80–$3.55.
  • Ceilings and height — ceiling board is slower to hang; rooms over 8–10 ft add about 10–30%.
  • Board type — moisture-resistant board is $180–$355 per 100 sq ft installed; soundproof $355–$760.
  • Texture — matching orange peel or knockdown adds $80–$205 per 100 sq ft; scraping popcorn $155–$460.
  • Minimum charge — a single small patch costs $75–$255 because most companies charge a $130–$205 minimum visit.

Ask every Washington company for the same five things: the finish level by number, whether primer is included, who hauls the debris, how texture will be matched, and the minimum charge. Compare those, not the headline price. Get a quote for your drywall job →

Drywall Cost in Washington by Room and Project Size

Quick answer

One 12×12 room: $815–$1,950. Two-car garage, walls and ceiling: $1,200–$3,850. Whole 2,000 sq ft house: $9,150–$28,500. Per sheet: $50–$100 hung and finished.

Worked example: a Washington living room of about 300 sq ft of wall with a popcorn ceiling. Scraping and re-skimming the ceiling at $255 per 100 sq ft is about $765, and skim-coating the walls smooth at $135 per 100 sq ft about $405, so roughly $1,170 before paint. A lab test for asbestos ($30–$75) comes first in a home built before 1980.

Whole-house math: a 2,000 sq ft house has about 7,000 sq ft of wall and ceiling. At $1.55–$3.25 per sq ft that is $9,150–$28,500 hung and finished, which is why a gut remodel's drywall line is one of its biggest. Booking the drywall and paint crews back to back saves a second round of floor protection and cleanup.

Washington Drywall Costs by Board and Finish Type

Board or finish typeCostBest for
Standard 1/2-inch drywall$155–$325 per 100 sq ftWalls in living rooms, bedrooms and hallways. The sheet itself is $10–$20; most of the price is hanging and finishing.
5/8-inch Type X fire-rated$13–$30 per sheet (board only)Required on a garage ceiling under living space; common on the garage wall shared with the house (the code minimum there is 1/2-inch) and in furnace rooms. Heavier and stiffer, so it also resists sag on ceilings.
Moisture- and mold-resistant (green or purple board)$180–$355 per 100 sq ft installedBathrooms, laundry rooms, basements and garages. Not a tile backer inside a shower; that needs cement board.
Soundproof (QuietRock or double layer)$355–$760 per 100 sq ft installedBedroom walls next to a living room, home offices, shared walls in a duplex. The sheet alone is $30–$100.
Lightweight 1/2-inch (UltraLight)$155–$325 per 100 sq ftCeilings and DIY jobs: lighter than regular 1/2-inch board at the same price, so it is easier to lift overhead.
Level 5 smooth finish$180–$355 per 100 sq ftWalls that get glossy paint, dark colors or raking light from big windows. A thin skim coat over the whole sheet hides every joint.
Skim coat over existing walls$100–$305 per 100 sq ftSmoothing textured or damaged walls without tearing them out. Cheaper than new drywall when the old board is sound.
Plaster (repair or veneer)$155–$1,250 per repairPre-1950 homes with plaster-and-lath walls. Patching plaster costs more per square foot than drywall; replacing it with drywall is a bigger job.
Cost by board or finish type in WashingtonTypical range, per 100 sq ft.
Standard 1/2-inch drywall $155–$325per 100 sq ft
Lightweight 1/2-inch (UltraLight) $155–$325per 100 sq ft
Level 5 smooth finish $180–$355per 100 sq ft
Skim coat over existing walls $100–$305per 100 sq ft
Washington tip: if the wall between your garage and house is bare studs or thin paneling, drywalling it is a code item, not a cosmetic one: 1/2-inch board on the wall, 5/8-inch fire-rated ($13–$30 a sheet) on a ceiling under living space. The whole garage runs $1,200–$3,850.

Board price vs. what you pay — the Washington drywall bill

A 4×8 sheet of 1/2-inch drywall costs $10–$20 at the store, and all the materials for a 12×12 room run $200–$400, but the room hung and finished in Washington is $815–$1,950. The difference pays for a hanger, a finisher who comes back two or three times as coats dry, sanding, cleanup and a warranty on cracks.

Hanging board is the easy half and the one DIYers can do; a $40-a-day lift rental makes ceilings possible. Taping and finishing is the skilled half: a poor Level 4 job shows every joint once the paint goes on. If you do anything yourself, hang it and hire the finish at about $0.50–$1.50 per sq ft.

What's included in a Washington drywall quote (and what costs extra)

A standard installed price covers the board, screws, tape, corner bead and joint compound, hanging, taping, three coats of mud, sanding to the finish level named, and a sweep-out. The headline price often leaves out:

  • Primer and paint — a separate trade in most Washington quotes; even a bare-minimum coat of primer is extra unless listed
  • Debris haul-away — $300–$500 to dispose of old drywall from a room, or $50–$205 per 100 sq ft to tear out and remove
  • Texture — $80–$205 per 100 sq ft to apply or match; a Level 5 skim is $1.80–$3.55 per sq ft
  • Asbestos or lead testing — $30–$75 for a mail-in texture sample, $250–$850 for a professional survey, in homes built before 1980

Ask how long the company warranties cracks and nail pops; good finishers put a year in writing.

What Affects Drywall Costs in Washington

Finish level

Level 4, the standard for painted walls, is $1.55–$3.25 per sq ft in Washington; Level 5, a full skim coat for glossy paint or strong light, is $1.80–$3.55. Level 3 is only for heavy texture. Get the level written on the quote.

Ceilings, height and access

Ceiling board is heavier to hang and slower to finish; a 12×12 ceiling replaced runs $510–$1,550. Rooms over 8–10 ft add about 10–30%, and stairwells need scaffolding.

Repair size and count

A small hole is $75–$255, a large one $155–$460, cracks and nail pops $100–$410. Several small repairs on one visit cost far less than three separate calls at the $130–$205 minimum.

Water damage and mold

Cutting out wet board and replacing it is $305–$2,050. If mold has set in behind the wall, remediation is a separate trade at $1,500–$3,000 per 100 sq ft, and the leak has to be fixed first.

Local rules

A like-for-like drywall repair or replacement in Washington usually needs no permit; a permit ($50–$150 where needed) comes in when walls move, the work is the garage-to-house separation or a remodel is already permitted. In homes built before 1978, a contractor who disturbs painted surfaces must follow the federal lead-safe rule, and texture or joint compound from before about 1980 should be tested for asbestos before sanding.

Labor rates in Washington

Labor is about 70% of the bill. Washington is a high-cost metro for construction labor; a room of drywall here is about 4% above the US typical of $1,250. Drywall contractors here charge about $45–$100 an hour, with a $130–$205 minimum for small repairs.

Texture and old finishes

Matching texture adds $80–$205 per 100 sq ft; scraping popcorn $155–$460. Plaster walls in older Washington homes cost more to patch ($155–$1,250) than drywall, and a full skim coat over them is $1.00–$3.05 per sq ft.

How to Save Money on Drywall in Washington
  1. Bundle the small repairs.Most Washington companies charge a $130–$205 minimum. One visit for five holes costs about the same as one visit for one hole.
  2. Specify Level 4, not Level 5.Level 4 ($1.55–$3.25 per sq ft) is right for flat and eggshell paint. Pay for Level 5 ($1.80–$3.55) only where glossy paint or raking light will show joints.
  3. Skim instead of replacing.Sound walls with ugly texture or lots of nail pops can be skim-coated for $1.00–$3.05 per sq ft, about half the price of new board, and with no demolition dust.
  4. Hang it yourself, hire the finish.Materials for a 12×12 room are $200–$400 and a lift rents for about $40 a day. Then pay a finisher about $0.50–$1.50 per sq ft for the part that shows.
  5. Fix the leak before the drywall.A $305–$2,050 water-damage repair under a live leak will be back in a month. Plumber or roofer first, drywall second, and keep the repair receipts for insurance.
  6. Get the finish level and extras in writing.Primer, texture matching, debris haul-away and moving furniture are the usual add-ons. A quote that lists them is cheaper to compare and harder to pad later.
Drywall Cost in Washington: What the Quote Should Include

Washington drywall companies often quote by the sheet or the square foot over the phone. Before you agree to the work, get these in writing:

  • The finish level by number (Level 4 for paint; Level 5 for smooth or glossy walls)
  • Board type and thickness for each room: 1/2-inch, 5/8-inch fire-rated, moisture-resistant, soundproof
  • Square footage or sheet count the price is based on
  • Whether primer is included, and who paints
  • Texture: match existing, apply new, or leave smooth
  • Demolition, debris haul-away and floor protection
  • Minimum charge and the number of visits (hanging, coats, sanding)
  • Warranty on cracks, nail pops and seams
Frequently asked questions — Drywall cost in Washington
How much does drywall cost in Washington?

$815–$1,950 to hang and finish one 12×12 room, labor and materials, and $1,300 is typical. That's $1.55–$3.25 per sq ft, or $50–$100 a sheet.

How much does drywall repair cost in Washington?

$75–$255 for a small hole, $155–$460 for a large one, $100–$410 for cracks and nail pops, and $305–$2,050 for water damage. Most companies charge a $130–$205 minimum per visit.

What does drywall cost per square foot in Washington?

$1.55–$3.25 per sq ft hung and finished to Level 4, labor and materials. Level 5 smooth is $1.80–$3.55; skim-coating existing walls $1.00–$3.05.

How much does it cost to fix a ceiling in Washington?

$255–$1,250 for a sag, stain or hole, and $510–$1,550 to tear out and replace a whole 12×12 room ceiling. Water damage with the repair runs $560–$3,300.

Can I hang drywall myself?

Hanging, yes: materials for a room are $200–$400 and a lift rents for about $40 a day. Finishing is the skilled part; most DIYers hire it out at about $0.50–$1.50 per sq ft.

How much does it cost to remove a popcorn ceiling in Washington?

$155–$460 per 100 sq ft to scrape, skim and prime an asbestos-free ceiling. Test first in any home built before 1980 ($30–$75 by mail); asbestos abatement costs far more.

How much is a skim coat in Washington?

$1.00–$3.05 per sq ft, or $410–$815 for the walls of a 12×12 room. It smooths texture and small damage without new board, but the room must be repainted after.

Do I need a permit for drywall?

A like-for-like drywall repair or replacement in Washington usually needs no permit; a permit ($50–$150 where needed) comes in when walls move, the work is the garage-to-house separation or a remodel is already permitted. In homes built before 1978, a contractor who disturbs painted surfaces must follow the federal lead-safe rule, and texture or joint compound from before about 1980 should be tested for asbestos before sanding.

How much does it cost to drywall a garage or a whole house in Washington?

$1,200–$3,850 for a two-car garage, walls and ceiling, with fire-rated board where the code requires it. A whole 2,000 sq ft house is $9,150–$28,500 hung and finished.

What's included in a Washington drywall quote?

Board, tape, mud, hanging, finishing to the level named, and cleanup. Often extra: primer and paint, debris haul-away ($300–$500), texture ($80–$205 per 100 sq ft) and asbestos testing in older homes.

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Prices for the Washington metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, dated city price pages, contractor and retailer price lists, federal producer-price and wage data. No drywall company can pay to change them, so always get a couple of quotes. Last reviewed November 2026. Read our full methodology →

Get a fair drywall quote in Washington

Local drywall contractors · Free quotes · No obligation, no spam.

Get quotes in Washington →Max 2 drywall contractors will contact you
Get quotes in WashingtonMax 2 drywall contractors · free · no spam→