How much does drywall cost in Los Angeles?
By Our research team · Last verified · Methodology
Drywalling a 12×12 room in Los Angeles costs $840–$2,000 including board, mud, tape and a paint-ready finish. $1,300 is the going rate; by the sheet it's $50–$105 hung and finished.
How we get this data- Typical
- $1,300
- Low end
- $580
- High end
- $3,150
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local drywall contractors send you a real quote. Free, no obligation.
Get my fair quote →The typical Los Angeles price is $1,300, 4% above the US typical of $1,250.
Los Angeles's price band
Los Angeles is pricier than 81% of the 195 US metros we price for drywall work.
Drywalling one 12×12 room in Los Angeles costs $840–$2,000, and $1,300 is what most homeowners pay. Repairs are the most common call: $80–$265 for a small hole, $265–$1,250 for a ceiling stain or sag. A whole 2,000 sq ft house runs $9,350–$29,150.
Angi's 2026 Los Angeles figure for a drywall installation project is $2,251 on average ($1,058–$3,467), and it notes work tied to seismic or structural repairs can add 5–10%. A Pasadena company's July 2026 price for asbestos-free popcorn ceiling removal, skim and paint is $2.70–$4.80 per sq ft. In California any drywall job of $1,000 or more, labor and materials together, needs a contractor licensed by the state board (the C-9 Drywall classification or a general B license); a job under $1,000 may be done unlicensed only if it needs no permit and no hired help.
Every installed price here covers board, hanging, taping, mud and sanding to a Level 4 finish. Painting is a separate trade, and repairs under about $210 usually hit a company's minimum charge.
Comparing cities, or after the US-wide picture? See the national guide: Drywall cost in the USA.
$840–$2,000 to hang and finish drywall in one 12×12 room in Los Angeles, labor and materials — typically $1,300. That's $1.55–$3.35 per sq ft or $50–$105 a sheet; a small hole patch is $80–$265 and water-damage repair $315–$2,100. Verified November 2026. Get free Los Angeles quotes →
- One 12×12 room hung and finished: $840–$2,000 ($1,300 typical)
- Per sq ft $1.55–$3.35; per sheet $50–$105
- Small hole $80–$265; large hole $160–$475; water damage $315–$2,100
- Skim coat $1.05–$3.15 per sq ft; popcorn removal $160–$475 per 100 sq ft
- Priciest area to work in: Hollywood & West Hollywood; lowest quotes: South LA, Inglewood & Long Beach
Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology
Installed prices include labor and materials to a paint-ready finish; repairs are per job including the visit. Los Angeles metro, re-verified November 2026.
| Service | Low | Typical | High |
|---|---|---|---|
| Hang and finish drywall, one 12×12 room (walls and ceiling, about 500 sq ft)per room | $840per room | $1,300 | $2,000 |
| Drywall contractor hourly rate/hr | $45/hr | $75 | $105 |
| Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)per 100 sq ft | $155per 100 sq ft | $235 | $335 |
| Level 5 smooth finish on new drywall, per 100 sq ftper 100 sq ft | $180per 100 sq ft | $285 | $365 |
| One 4×8 sheet of 1/2-inch drywall, hung and finishedper sheet | $50per sheet | $75 | $105 |
| Small hole or dent repair (under 4 in.), one visitper job | $80per job | $160 | $265 |
| Large hole repair (6–12 in., new piece let in and finished)per job | $160per job | $290 | $475 |
| Cracks, nail pops and seam repairper job | $105per job | $210 | $420 |
| Water-damaged drywall: cut out, replace and finishper job | $315per job | $945 | $2,100 |
| Ceiling drywall repair (sag, stain or hole)per job | $265per job | $630 | $1,250 |
| Replace a 12×12 room ceiling: tear out, new drywall, finishedper room | $525per room | $940 | $1,550 |
| Skim coat existing walls to a smooth finish, per 100 sq ftper 100 sq ft | $105per 100 sq ft | $135 | $315 |
| Skim coat one 12×12 room, walls onlyper room | $420per room | $580 | $840 |
| Wall texture (orange peel, knockdown, skip trowel), per 100 sq ftper 100 sq ft | $85per 100 sq ft | $135 | $210 |
| Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ftper 100 sq ft | $160per 100 sq ft | $265 | $475 |
| Corner bead repair or replacement (one damaged outside corner)per corner | $80per corner | $160 | $315 |
| New partition wall, framed and drywalled both sides (8 ft high), per linear ftper linear ft | $25per linear ft | $45 | $85 |
| Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installedper 100 sq ft | $360per 100 sq ft | $540 | $775 |
| Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installedper 100 sq ft | $180per 100 sq ft | $260 | $365 |
| Drywall a 2-car garage, walls and ceiling (5/8-inch fire-rated where code requires)per garage | $1,250per garage | $2,300 | $3,950 |
| Drywall a whole 2,000 sq ft house (about 7,000 sq ft of board), hung and finishedper house | $9,350per house | $15,600 | $29,150 |
| Remove and dispose of old drywall, per 100 sq ftper 100 sq ft | $50per 100 sq ft | $105 | $210 |
| Plaster wall or ceiling repair (cracks, holes, loose plaster)per job | $160per job | $420 | $1,250 |
| Drywall crew day rate (two people, materials extra)per day | $735per day | $1,150 | $1,700 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local drywall contractors in Los Angeles
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need a price on?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the drywall contractors who reply.
Where should they text you?
- Max 2 drywall contractors. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched drywall contractors see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 drywall contractors about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology
Figures are for the Los Angeles metro area. Trip fees can apply on the far edges; apartments and pre-war buildings in Hollywood & West Hollywood cost the most to work in.
Drywall prices across Los Angeles
Same sheets, four price bands. Parking, access and older walls push Hollywood & West Hollywood to the top; South LA, Inglewood & Long Beach sits at or below the city typical.
Hollywood & West Hollywood
- Per 12×12 room
- $905–$2,250 per room
- Typical repair
- $175–$530 / large hole patch
Older buildings, parking and elevators slow every visit, and where the walls are plaster rather than drywall, patches take longer and cost more.
Downtown & the Arts District
- Per 12×12 room
- $865–$2,100 per room
- Typical repair
- $165–$505 / large hole patch
Older housing with character and the quirks that go with it: crooked studs, plaster patches and old texture that has to be matched.
The Valley
- Per 12×12 room
- $840–$2,000 per room
- Typical repair
- $160–$475 / large hole patch
Established neighborhoods of single-family homes. Most calls are a patch, a water stain or one room at the city's going rate.
South LA, Inglewood & Long Beach
- Per 12×12 room
- $775–$1,950 per room
- Typical repair
- $145–$460 / large hole patch
The lowest labor prices in the metro, with a trip charge at some companies. Simple patch jobs keep most bills low.
Real-World Drywall Costs in Los Angeles
Here's what common drywall jobs cost in Los Angeles in 2026, labor and materials to a paint-ready finish.
Doorknob hole in a bedroom wall — 1 visit, 1–2 hours
Cut a clean square, screw in a backer, let in a patch, tape and mud in two or three coats, sand. Most Los Angeles companies charge their $130–$210 minimum for a single patch, so add other holes to the same visit.
Ceiling stain and sag after a bathroom leak
Water-damaged board cut out and replaced ($315–$2,100) plus the ceiling repair and texture match ($265–$1,250). Fix the leak first; the drywall company won't warranty a patch under a live drip.
Drywall one 12×12 room (garage conversion, addition or basement) — 2–4 days
Walls and ceiling hung and finished to Level 4 for $1,300 typical, about 15 sheets. Moisture-resistant board for a bathroom or basement adds about $25 per 100 sq ft; paint is separate.
Scrape a popcorn ceiling in a living room (about 300 sq ft)
Scrape, skim smooth and prime at $160–$475 per 100 sq ft. In a home built before 1980, a lab test ($30–$75) comes first; if it's positive, abatement is a different trade at a much higher price.
Skim coat a textured bedroom smooth
Two thin coats of compound over the walls of a 12×12 room, sanded to Level 5, at $1.05–$3.15 per sq ft. The ceiling adds $100–$150 per 100 sq ft, and new paint is a must afterwards.
How much does drywall cost in Los Angeles?
Drywalling a 12×12 room in Los Angeles costs $840 to $2,000. The middle of the market, about $1,300, covers about 15 sheets of 1/2-inch board hung, taped, mudded and sanded to a Level 4 finish, with corner bead and cleanup. Painting is separate.
Repairs are priced by the job, not the foot: $80–$265 for a small hole, $160–$475 for a large one, $315–$2,100 for water damage. Most Los Angeles companies have a $130–$210 minimum, so bundle small fixes into one visit. Prices re-checked against 83 sources in November 2026.
Drywall prices in Los Angeles (2026): new board, repairs and finishes
Hang and finish costs $1.55–$3.35 per sq ft in Los Angeles, a small hole patch $80–$265, and a skim coat $1.05–$3.15 per sq ft.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials) | $155 | $235 | $335 |
| One 4×8 sheet of 1/2-inch drywall, hung and finished | $50 | $75 | $105 |
| Small hole or dent repair (under 4 in.), one visit | $80 | $160 | $265 |
| Large hole repair (6–12 in., new piece let in and finished) | $160 | $290 | $475 |
| Water-damaged drywall: cut out, replace and finish | $315 | $945 | $2,100 |
| Replace a 12×12 room ceiling: tear out, new drywall, finished | $525 | $940 | $1,550 |
| Skim coat existing walls to a smooth finish, per 100 sq ft | $105 | $135 | $315 |
| Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft | $160 | $265 | $475 |
Repair or replace in Los Angeles: a wall with a few holes is a $160–$475 patch job; a wall with old texture or dozens of nail pops is a $1.05–$3.15 per sq ft skim coat; only a wall that is crumbling, moldy or wet through needs new board at $1.55–$3.35 per sq ft.
What moves a drywall quote in Los Angeles:
- Finish level — Level 4 for painted walls is $1.55–$3.35 per sq ft; a Level 5 smooth finish $1.80–$3.65.
- Ceilings and height — ceiling board is slower to hang; rooms over 8–10 ft add about 10–30%.
- Board type — moisture-resistant board is $180–$365 per 100 sq ft installed; soundproof $360–$775.
- Texture — matching orange peel or knockdown adds $85–$210 per 100 sq ft; scraping popcorn $160–$475.
- Minimum charge — a single small patch costs $80–$265 because most companies charge a $130–$210 minimum visit.
Ask every Los Angeles company for the same five things: the finish level by number, whether primer is included, who hauls the debris, how texture will be matched, and the minimum charge. Compare those, not the headline price. Get a quote for your drywall job →
Drywall Cost in Los Angeles by Room and Project Size
One 12×12 room: $840–$2,000. Two-car garage, walls and ceiling: $1,250–$3,950. Whole 2,000 sq ft house: $9,350–$29,150. Per sheet: $50–$105 hung and finished.
Worked example: a Los Angeles living room of about 300 sq ft of wall with a popcorn ceiling. Scraping and re-skimming the ceiling at $265 per 100 sq ft is about $795, and skim-coating the walls smooth at $135 per 100 sq ft about $405, so roughly $1,200 before paint. A lab test for asbestos ($30–$75) comes first in a home built before 1980.
Whole-house math: a 2,000 sq ft house has about 7,000 sq ft of wall and ceiling. At $1.55–$3.35 per sq ft that is $9,350–$29,150 hung and finished, which is why a gut remodel's drywall line is one of its biggest. Booking the drywall and paint crews back to back saves a second round of floor protection and cleanup.
Los Angeles Drywall Costs by Board and Finish Type
| Board or finish type | Cost | Best for |
|---|---|---|
| Standard 1/2-inch drywall | $155–$335 per 100 sq ft | Walls in living rooms, bedrooms and hallways. The sheet itself is $10–$20; most of the price is hanging and finishing. |
| 5/8-inch Type X fire-rated | $13–$30 per sheet (board only) | Required on a garage ceiling under living space; common on the garage wall shared with the house (the code minimum there is 1/2-inch) and in furnace rooms. Heavier and stiffer, so it also resists sag on ceilings. |
| Moisture- and mold-resistant (green or purple board) | $180–$365 per 100 sq ft installed | Bathrooms, laundry rooms, basements and garages. Not a tile backer inside a shower; that needs cement board. |
| Soundproof (QuietRock or double layer) | $360–$775 per 100 sq ft installed | Bedroom walls next to a living room, home offices, shared walls in a duplex. The sheet alone is $30–$100. |
| Lightweight 1/2-inch (UltraLight) | $155–$335 per 100 sq ft | Ceilings and DIY jobs: lighter than regular 1/2-inch board at the same price, so it is easier to lift overhead. |
| Level 5 smooth finish | $180–$365 per 100 sq ft | Walls that get glossy paint, dark colors or raking light from big windows. A thin skim coat over the whole sheet hides every joint. |
| Skim coat over existing walls | $105–$315 per 100 sq ft | Smoothing textured or damaged walls without tearing them out. Cheaper than new drywall when the old board is sound. |
| Plaster (repair or veneer) | $160–$1,250 per repair | Pre-1950 homes with plaster-and-lath walls. Patching plaster costs more per square foot than drywall; replacing it with drywall is a bigger job. |
Board price vs. what you pay — the Los Angeles drywall bill
A 4×8 sheet of 1/2-inch drywall costs $10–$20 at the store, and all the materials for a 12×12 room run $200–$400, but the room hung and finished in Los Angeles is $840–$2,000. The difference pays for a hanger, a finisher who comes back two or three times as coats dry, sanding, cleanup and a warranty on cracks.
Hanging board is the easy half and the one DIYers can do; a $40-a-day lift rental makes ceilings possible. Taping and finishing is the skilled half: a poor Level 4 job shows every joint once the paint goes on. If you do anything yourself, hang it and hire the finish at about $0.50–$1.50 per sq ft.
What's included in a Los Angeles drywall quote (and what costs extra)
A standard installed price covers the board, screws, tape, corner bead and joint compound, hanging, taping, three coats of mud, sanding to the finish level named, and a sweep-out. The headline price often leaves out:
- Primer and paint — a separate trade in most Los Angeles quotes; even a bare-minimum coat of primer is extra unless listed
- Debris haul-away — $300–$500 to dispose of old drywall from a room, or $50–$210 per 100 sq ft to tear out and remove
- Texture — $85–$210 per 100 sq ft to apply or match; a Level 5 skim is $1.80–$3.65 per sq ft
- Asbestos or lead testing — $30–$75 for a mail-in texture sample, $250–$850 for a professional survey, in homes built before 1980
Ask how long the company warranties cracks and nail pops; good finishers put a year in writing.
Finish level
Level 4, the standard for painted walls, is $1.55–$3.35 per sq ft in Los Angeles; Level 5, a full skim coat for glossy paint or strong light, is $1.80–$3.65. Level 3 is only for heavy texture. Get the level written on the quote.
Ceilings, height and access
Ceiling board is heavier to hang and slower to finish; a 12×12 ceiling replaced runs $525–$1,550. Rooms over 8–10 ft add about 10–30%, and stairwells need scaffolding.
Repair size and count
A small hole is $80–$265, a large one $160–$475, cracks and nail pops $105–$420. Several small repairs on one visit cost far less than three separate calls at the $130–$210 minimum.
Water damage and mold
Cutting out wet board and replacing it is $315–$2,100. If mold has set in behind the wall, remediation is a separate trade at $1,500–$3,000 per 100 sq ft, and the leak has to be fixed first.
Local rules
In California any drywall job of $1,000 or more, labor and materials together, needs a contractor licensed by the state board (the C-9 Drywall classification or a general B license). A permit is rarely needed for like-for-like drywall, but it is for fire-rated walls and anything structural. Texture applied before about 1980 may contain asbestos, so test ($30–$75 by mail) before scraping a popcorn ceiling in an older Los Angeles home.
Labor rates in Los Angeles
Labor is about 70% of the bill. Los Angeles is one of the biggest and most expensive metros in the country; a room of drywall here is about 4% above the US typical of $1,250. Drywall contractors here charge about $45–$105 an hour, with a $130–$210 minimum for small repairs.
Texture and old finishes
Matching texture adds $85–$210 per 100 sq ft; scraping popcorn $160–$475. Plaster walls in older Los Angeles homes cost more to patch ($160–$1,250) than drywall, and a full skim coat over them is $1.05–$3.15 per sq ft.
- Bundle the small repairs.Most Los Angeles companies charge a $130–$210 minimum. One visit for five holes costs about the same as one visit for one hole.
- Specify Level 4, not Level 5.Level 4 ($1.55–$3.35 per sq ft) is right for flat and eggshell paint. Pay for Level 5 ($1.80–$3.65) only where glossy paint or raking light will show joints.
- Skim instead of replacing.Sound walls with ugly texture or lots of nail pops can be skim-coated for $1.05–$3.15 per sq ft, about half the price of new board, and with no demolition dust.
- Hang it yourself, hire the finish.Materials for a 12×12 room are $200–$400 and a lift rents for about $40 a day. Then pay a finisher about $0.50–$1.50 per sq ft for the part that shows.
- Fix the leak before the drywall.A $315–$2,100 water-damage repair under a live leak will be back in a month. Plumber or roofer first, drywall second, and keep the repair receipts for insurance.
- Get the finish level and extras in writing.Primer, texture matching, debris haul-away and moving furniture are the usual add-ons. A quote that lists them is cheaper to compare and harder to pad later.
Los Angeles drywall companies often quote by the sheet or the square foot over the phone. Before you agree to the work, get these in writing:
- The finish level by number (Level 4 for paint; Level 5 for smooth or glossy walls)
- Board type and thickness for each room: 1/2-inch, 5/8-inch fire-rated, moisture-resistant, soundproof
- Square footage or sheet count the price is based on
- Whether primer is included, and who paints
- Texture: match existing, apply new, or leave smooth
- Demolition, debris haul-away and floor protection
- Minimum charge and the number of visits (hanging, coats, sanding)
- Warranty on cracks, nail pops and seams
How much does drywall cost in Los Angeles?
$840–$2,000 to hang and finish one 12×12 room, labor and materials, and $1,300 is typical. That's $1.55–$3.35 per sq ft, or $50–$105 a sheet.
How much does drywall repair cost in Los Angeles?
$80–$265 for a small hole, $160–$475 for a large one, $105–$420 for cracks and nail pops, and $315–$2,100 for water damage. Most companies charge a $130–$210 minimum per visit.
What does drywall cost per square foot in Los Angeles?
$1.55–$3.35 per sq ft hung and finished to Level 4, labor and materials. Level 5 smooth is $1.80–$3.65; skim-coating existing walls $1.05–$3.15.
How much does it cost to fix a ceiling in Los Angeles?
$265–$1,250 for a sag, stain or hole, and $525–$1,550 to tear out and replace a whole 12×12 room ceiling. Water damage with the repair runs $580–$3,350.
Can I hang drywall myself?
Hanging, yes: materials for a room are $200–$400 and a lift rents for about $40 a day. Finishing is the skilled part; most DIYers hire it out at about $0.50–$1.50 per sq ft.
How much does it cost to remove a popcorn ceiling in Los Angeles?
$160–$475 per 100 sq ft to scrape, skim and prime an asbestos-free ceiling. Test first in any home built before 1980 ($30–$75 by mail); asbestos abatement costs far more.
How much is a skim coat in Los Angeles?
$1.05–$3.15 per sq ft, or $420–$840 for the walls of a 12×12 room. It smooths texture and small damage without new board, but the room must be repainted after.
Do I need a permit for drywall?
In California any drywall job of $1,000 or more, labor and materials together, needs a contractor licensed by the state board (the C-9 Drywall classification or a general B license). A permit is rarely needed for like-for-like drywall, but it is for fire-rated walls and anything structural. Texture applied before about 1980 may contain asbestos, so test ($30–$75 by mail) before scraping a popcorn ceiling in an older Los Angeles home.
How much does it cost to drywall a garage or a whole house in Los Angeles?
$1,250–$3,950 for a two-car garage, walls and ceiling, with fire-rated board where the code requires it. A whole 2,000 sq ft house is $9,350–$29,150 hung and finished.
What's included in a Los Angeles drywall quote?
Board, tape, mud, hanging, finishing to the level named, and cleanup. Often extra: primer and paint, debris haul-away ($300–$500), texture ($85–$210 per 100 sq ft) and asbestos testing in older homes.
Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology
Prices for the Los Angeles metro area, November 2026. Outer suburbs may vary.
Get a fair drywall quote in Los Angeles
Local drywall contractors · Free quotes · No obligation, no spam.