Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does drywall cost in San Francisco?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched11 min read
Drywall cost

Drywall costs in San Francisco

San Francisco, CAChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for San Francisco, CA
$965–$2,300per room

Drywalling a 12×12 room in San Francisco costs $965–$2,300 including board, mud, tape and a paint-ready finish. $1,500 is the going rate; by the sheet it's $60–$115 hung and finished.

How we get this data
Typical
$1,500
Low end
$660
High end
$3,600
Per 12×12 room
$965–$2,300
Per sq ft (hang + finish)
$1.75–$3.70
Small hole patch
$90–$300
Water-damage repair
$360–$2,400

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local drywall contractors send you a real quote. Free, no obligation.

Get my fair quote →
Typical drywall price: San Francisco vs nearby citiesTypical price, per room. The line marks the US typical.
San Francisco, CAThis guide $1,500
Oakland, CA $1,500
San Jose, CA $1,450
Stockton, CA $1,350
Modesto, CA $1,300

The typical San Francisco price is $1,500, 20% above the US typical of $1,250.

Where San Francisco sits among 195 US metrosNumber of metros at each typical drywall price, per room.

San Francisco's price band

San Francisco is pricier than 97% of the 195 US metros we price for drywall work.

Hanging and finishing drywall costs $1.75–$3.70 per sq ft in San Francisco, or $60–$115 a sheet. A small hole patch is $90–$300, a large one $180–$540, and water-damage repair $360–$2,400. Skim-coating a room's walls smooth runs $480–$965.

San Francisco–Oakland drywall installers earn a median $82,160 a year (BLS, May 2025), about 39% above the US median, so labor-heavy jobs like repairs and skim coats cost more here than in almost any other mainland metro. In California any drywall job of $1,000 or more, labor and materials together, needs a contractor licensed by the state board (the C-9 Drywall classification or a general B license); a job under $1,000 may be done unlicensed only if it needs no permit and no hired help.

Prices on this page include labor and materials to a paint-ready finish unless the row says otherwise; paint and primer are extra. Many San Francisco companies charge a $150–$240 minimum for a single small patch.

Comparing cities, or after the US-wide picture? See the national guide: Drywall cost in the USA.

Quick answer

$965–$2,300 to hang and finish drywall in one 12×12 room in San Francisco, labor and materials — typically $1,500. That's $1.75–$3.70 per sq ft or $60–$115 a sheet; a small hole patch is $90–$300 and water-damage repair $360–$2,400. Verified November 2026. Get free San Francisco quotes →

  • One 12×12 room hung and finished: $965–$2,300 ($1,500 typical)
  • Per sq ft $1.75–$3.70; per sheet $60–$115
  • Small hole $90–$300; large hole $180–$540; water damage $360–$2,400
  • Skim coat $1.20–$3.60 per sq ft; popcorn removal $180–$540 per 100 sq ft
  • Priciest area to work in: SoMa & the Mission; lowest quotes: Daly City & the Peninsula

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Detailed pricing — Drywall cost in San Francisco 2026

Installed prices include labor and materials to a paint-ready finish; repairs are per job including the visit. San Francisco metro, re-verified November 2026.

ServiceLowTypicalHigh
Hang and finish drywall, one 12×12 room (walls and ceiling, about 500 sq ft)per room$965per room$1,500$2,300
Drywall contractor hourly rate/hr$55/hr$85$120
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)per 100 sq ft$175per 100 sq ft$260$370
Level 5 smooth finish on new drywall, per 100 sq ftper 100 sq ft$205per 100 sq ft$320$405
One 4×8 sheet of 1/2-inch drywall, hung and finishedper sheet$60per sheet$80$115
Small hole or dent repair (under 4 in.), one visitper job$90per job$180$300
Large hole repair (6–12 in., new piece let in and finished)per job$180per job$330$540
Cracks, nail pops and seam repairper job$120per job$240$480
Water-damaged drywall: cut out, replace and finishper job$360per job$1,100$2,400
Ceiling drywall repair (sag, stain or hole)per job$300per job$725$1,450
Replace a 12×12 room ceiling: tear out, new drywall, finishedper room$590per room$1,050$1,800
Skim coat existing walls to a smooth finish, per 100 sq ftper 100 sq ft$120per 100 sq ft$155$360
Skim coat one 12×12 room, walls onlyper room$480per room$660$965
Wall texture (orange peel, knockdown, skip trowel), per 100 sq ftper 100 sq ft$95per 100 sq ft$155$235
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ftper 100 sq ft$180per 100 sq ft$300$540
Corner bead repair or replacement (one damaged outside corner)per corner$90per corner$180$360
New partition wall, framed and drywalled both sides (8 ft high), per linear ftper linear ft$30per linear ft$50$95
Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installedper 100 sq ft$395per 100 sq ft$590$840
Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installedper 100 sq ft$205per 100 sq ft$290$405
Drywall a 2-car garage, walls and ceiling (5/8-inch fire-rated where code requires)per garage$1,400per garage$2,550$4,400
Drywall a whole 2,000 sq ft house (about 7,000 sq ft of board), hung and finishedper house$10,450per house$17,450$32,600
Remove and dispose of old drywall, per 100 sq ftper 100 sq ft$60per 100 sq ft$120$235
Plaster wall or ceiling repair (cracks, holes, loose plaster)per job$180per job$480$1,450
Drywall crew day rate (two people, materials extra)per day$845per day$1,300$1,950
drywall jobs in San Francisco: what they costPer 100 sq ft, low to high with the typical price marked. Every line is in the table above.
Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installed $590$395–$840
Level 5 smooth finish on new drywall, per 100 sq ft $320$205–$405
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft $300$180–$540
Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installed $290$205–$405
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials) $260$175–$370
Skim coat existing walls to a smooth finish, per 100 sq ft $155$120–$360
Wall texture (orange peel, knockdown, skip trowel), per 100 sq ft $155$95–$235
Remove and dispose of old drywall, per 100 sq ft $120$60–$235
Already got a quote?
Check it against these San Francisco prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local drywall contractors in San Francisco

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need a price on?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Figures are for the San Francisco metro area. Trip fees can apply on the far edges; apartments and pre-war buildings in SoMa & the Mission cost the most to work in.

How drywall costs vary across San Francisco

Drywall prices across San Francisco

Same sheets, four price bands. Parking, access and older walls push SoMa & the Mission to the top; Daly City & the Peninsula sits at or below the city typical.

Drywall prices across San FranciscoTypical range by part of the metro, per room. The line marks the San Francisco typical.
SoMa & the Mission8–12% above the city average $1,050–$2,600per room
Oakland & the East BayStandard to 6% above $995–$2,450per room
Daly City & the PeninsulaStandard; bigger rooms common $965–$2,350per room
Richmond, Vallejo & North Bay3–8% below; trip fees $890–$2,250per room

SoMa & the Mission

8–12% above the city average
SoMa, Mission, Potrero Hill, Dogpatch
Per 12×12 room
$1,050–$2,600 per room
Typical repair
$195–$605 / large hole patch

Older buildings, parking and elevators slow every visit, and where the walls are plaster rather than drywall, patches take longer and cost more.

Oakland & the East Bay

Standard to 6% above
Downtown Oakland, Fruitvale, Emeryville, Berkeley
Per 12×12 room
$995–$2,450 per room
Typical repair
$185–$570 / large hole patch

A mix of older homes and new infill. Older houses here often have textured or much-patched walls, which push a repair toward the top of the range.

Daly City & the Peninsula

Standard; bigger rooms common
Daly City, South San Francisco, San Mateo
Per 12×12 room
$965–$2,350 per room
Typical repair
$180–$555 / large hole patch

Two-story homes with open stairwells and vaulted ceilings, which need scaffolding or a lift and push ceiling work up.

Richmond, Vallejo & North Bay

3–8% below; trip fees
Richmond, Vallejo, San Rafael
Per 12×12 room
$890–$2,250 per room
Typical repair
$165–$525 / large hole patch

Lower overhead keeps quotes at or a little below the city typical. Book ahead if you can, since a same-day patch call costs more.

What you'll actually pay — job by job

Real-World Drywall Costs in San Francisco

Here's what common drywall jobs cost in San Francisco in 2026, labor and materials to a paint-ready finish.

Doorknob hole in a bedroom wall — 1 visit, 1–2 hours

$90–$300

Cut a clean square, screw in a backer, let in a patch, tape and mud in two or three coats, sand. Most San Francisco companies charge their $150–$240 minimum for a single patch, so add other holes to the same visit.

Ceiling stain and sag after a bathroom leak

$660–$3,850

Water-damaged board cut out and replaced ($360–$2,400) plus the ceiling repair and texture match ($300–$1,450). Fix the leak first; the drywall company won't warranty a patch under a live drip.

Drywall one 12×12 room (garage conversion, addition or basement) — 2–4 days

$965–$2,300

Walls and ceiling hung and finished to Level 4 for $1,500 typical, about 15 sheets. Moisture-resistant board for a bathroom or basement adds about $30 per 100 sq ft; paint is separate.

Scrape a popcorn ceiling in a living room (about 300 sq ft)

$540–$1,620

Scrape, skim smooth and prime at $180–$540 per 100 sq ft. In a home built before 1980, a lab test ($30–$75) comes first; if it's positive, abatement is a different trade at a much higher price.

Skim coat a textured bedroom smooth

$480–$965

Two thin coats of compound over the walls of a 12×12 room, sanded to Level 5, at $1.20–$3.60 per sq ft. The ceiling adds $100–$150 per 100 sq ft, and new paint is a must afterwards.

How much does drywall cost in San Francisco?

$965–$2,300, with $1,500 typical. A room with a plain ceiling and few corners sits at the low end; a Level 5 smooth finish ($2.05–$4.05 per sq ft), a vaulted ceiling or lots of windows and closets lands near the top. Quotes above $2,300 usually mean a bigger room, demolition or texture.

Bigger jobs scale by the square foot: $1,400–$4,400 for a two-car garage, $10,450–$32,600 for a whole 2,000 sq ft house. Skim-coating existing walls smooth is $1.20–$3.60 per sq ft, about half the price of new board. Figures re-checked against 83 sources in November 2026.

Drywall prices in San Francisco (2026): new board, repairs and finishes

Hang and finish costs $1.75–$3.70 per sq ft in San Francisco, a small hole patch $90–$300, and a skim coat $1.20–$3.60 per sq ft.

Line on the quoteLowTypicalHigh
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)$175$260$370
One 4×8 sheet of 1/2-inch drywall, hung and finished$60$80$115
Small hole or dent repair (under 4 in.), one visit$90$180$300
Large hole repair (6–12 in., new piece let in and finished)$180$330$540
Water-damaged drywall: cut out, replace and finish$360$1,100$2,400
Replace a 12×12 room ceiling: tear out, new drywall, finished$590$1,050$1,800
Skim coat existing walls to a smooth finish, per 100 sq ft$120$155$360
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft$180$300$540

Repair or replace in San Francisco: a wall with a few holes is a $180–$540 patch job; a wall with old texture or dozens of nail pops is a $1.20–$3.60 per sq ft skim coat; only a wall that is crumbling, moldy or wet through needs new board at $1.75–$3.70 per sq ft.

What moves a drywall quote in San Francisco:

  • Finish level — Level 4 for painted walls is $1.75–$3.70 per sq ft; a Level 5 smooth finish $2.05–$4.05.
  • Ceilings and height — ceiling board is slower to hang; rooms over 8–10 ft add about 10–30%.
  • Board type — moisture-resistant board is $205–$405 per 100 sq ft installed; soundproof $395–$840.
  • Texture — matching orange peel or knockdown adds $95–$235 per 100 sq ft; scraping popcorn $180–$540.
  • Minimum charge — a single small patch costs $90–$300 because most companies charge a $150–$240 minimum visit.

Ask every San Francisco company for the same five things: the finish level by number, whether primer is included, who hauls the debris, how texture will be matched, and the minimum charge. Compare those, not the headline price. Get a quote for your drywall job →

Drywall Cost in San Francisco by Room and Project Size

Quick answer

One 12×12 room: $965–$2,300. Two-car garage, walls and ceiling: $1,400–$4,400. Whole 2,000 sq ft house: $10,450–$32,600. Per sheet: $60–$115 hung and finished.

Worked example: a San Francisco living room of about 300 sq ft of wall with a popcorn ceiling. Scraping and re-skimming the ceiling at $300 per 100 sq ft is about $900, and skim-coating the walls smooth at $155 per 100 sq ft about $465, so roughly $1,365 before paint. A lab test for asbestos ($30–$75) comes first in a home built before 1980.

Whole-house math: a 2,000 sq ft house has about 7,000 sq ft of wall and ceiling. At $1.75–$3.70 per sq ft that is $10,450–$32,600 hung and finished, which is why a gut remodel's drywall line is one of its biggest. Booking the drywall and paint crews back to back saves a second round of floor protection and cleanup.

San Francisco Drywall Costs by Board and Finish Type

Board or finish typeCostBest for
Standard 1/2-inch drywall$175–$370 per 100 sq ftWalls in living rooms, bedrooms and hallways. The sheet itself is $10–$20; most of the price is hanging and finishing.
5/8-inch Type X fire-rated$13–$30 per sheet (board only)Required on a garage ceiling under living space; common on the garage wall shared with the house (the code minimum there is 1/2-inch) and in furnace rooms. Heavier and stiffer, so it also resists sag on ceilings.
Moisture- and mold-resistant (green or purple board)$205–$405 per 100 sq ft installedBathrooms, laundry rooms, basements and garages. Not a tile backer inside a shower; that needs cement board.
Soundproof (QuietRock or double layer)$395–$840 per 100 sq ft installedBedroom walls next to a living room, home offices, shared walls in a duplex. The sheet alone is $30–$100.
Lightweight 1/2-inch (UltraLight)$175–$370 per 100 sq ftCeilings and DIY jobs: lighter than regular 1/2-inch board at the same price, so it is easier to lift overhead.
Level 5 smooth finish$205–$405 per 100 sq ftWalls that get glossy paint, dark colors or raking light from big windows. A thin skim coat over the whole sheet hides every joint.
Skim coat over existing walls$120–$360 per 100 sq ftSmoothing textured or damaged walls without tearing them out. Cheaper than new drywall when the old board is sound.
Plaster (repair or veneer)$180–$1,450 per repairPre-1950 homes with plaster-and-lath walls. Patching plaster costs more per square foot than drywall; replacing it with drywall is a bigger job.
Cost by board or finish type in San FranciscoTypical range, per 100 sq ft.
Standard 1/2-inch drywall $175–$370per 100 sq ft
Lightweight 1/2-inch (UltraLight) $175–$370per 100 sq ft
Level 5 smooth finish $205–$405per 100 sq ft
Skim coat over existing walls $120–$360per 100 sq ft
San Francisco tip: if the wall between your garage and house is bare studs or thin paneling, drywalling it is a code item, not a cosmetic one: 1/2-inch board on the wall, 5/8-inch fire-rated ($13–$30 a sheet) on a ceiling under living space. The whole garage runs $1,400–$4,400.

Board price vs. what you pay — the San Francisco drywall bill

A 4×8 sheet of 1/2-inch drywall costs $10–$20 at the store, and all the materials for a 12×12 room run $200–$400, but the room hung and finished in San Francisco is $965–$2,300. The difference pays for a hanger, a finisher who comes back two or three times as coats dry, sanding, cleanup and a warranty on cracks.

Hanging board is the easy half and the one DIYers can do; a $40-a-day lift rental makes ceilings possible. Taping and finishing is the skilled half: a poor Level 4 job shows every joint once the paint goes on. If you do anything yourself, hang it and hire the finish at about $0.50–$1.50 per sq ft.

What's included in a San Francisco drywall quote (and what costs extra)

A standard installed price covers the board, screws, tape, corner bead and joint compound, hanging, taping, three coats of mud, sanding to the finish level named, and a sweep-out. The headline price often leaves out:

  • Primer and paint — a separate trade in most San Francisco quotes; even a bare-minimum coat of primer is extra unless listed
  • Debris haul-away — $300–$500 to dispose of old drywall from a room, or $60–$235 per 100 sq ft to tear out and remove
  • Texture — $95–$235 per 100 sq ft to apply or match; a Level 5 skim is $2.05–$4.05 per sq ft
  • Asbestos or lead testing — $30–$75 for a mail-in texture sample, $250–$850 for a professional survey, in homes built before 1980

Ask how long the company warranties cracks and nail pops; good finishers put a year in writing.

What Affects Drywall Costs in San Francisco

Finish level

Level 4, the standard for painted walls, is $1.75–$3.70 per sq ft in San Francisco; Level 5, a full skim coat for glossy paint or strong light, is $2.05–$4.05. Level 3 is only for heavy texture. Get the level written on the quote.

Ceilings, height and access

Ceiling board is heavier to hang and slower to finish; a 12×12 ceiling replaced runs $590–$1,800. Rooms over 8–10 ft add about 10–30%, and stairwells need scaffolding.

Repair size and count

A small hole is $90–$300, a large one $180–$540, cracks and nail pops $120–$480. Several small repairs on one visit cost far less than three separate calls at the $150–$240 minimum.

Water damage and mold

Cutting out wet board and replacing it is $360–$2,400. If mold has set in behind the wall, remediation is a separate trade at $1,500–$3,000 per 100 sq ft, and the leak has to be fixed first.

Local rules

In California any drywall job of $1,000 or more, labor and materials together, needs a contractor licensed by the state board (the C-9 Drywall classification or a general B license). A permit is rarely needed for like-for-like drywall, but it is for fire-rated walls and anything structural. Texture applied before about 1980 may contain asbestos, so test ($30–$75 by mail) before scraping a popcorn ceiling in an older San Francisco home.

Labor rates in San Francisco

Labor is about 70% of the bill. San Francisco is a high-cost metro for construction labor; a room of drywall here is about 20% above the US typical of $1,250. Drywall contractors here charge about $55–$120 an hour, with a $150–$240 minimum for small repairs.

Texture and old finishes

Matching texture adds $95–$235 per 100 sq ft; scraping popcorn $180–$540. Plaster walls in older San Francisco homes cost more to patch ($180–$1,450) than drywall, and a full skim coat over them is $1.20–$3.60 per sq ft.

How to Save Money on Drywall in San Francisco
  1. Bundle the small repairs.Most San Francisco companies charge a $150–$240 minimum. One visit for five holes costs about the same as one visit for one hole.
  2. Specify Level 4, not Level 5.Level 4 ($1.75–$3.70 per sq ft) is right for flat and eggshell paint. Pay for Level 5 ($2.05–$4.05) only where glossy paint or raking light will show joints.
  3. Skim instead of replacing.Sound walls with ugly texture or lots of nail pops can be skim-coated for $1.20–$3.60 per sq ft, about half the price of new board, and with no demolition dust.
  4. Hang it yourself, hire the finish.Materials for a 12×12 room are $200–$400 and a lift rents for about $40 a day. Then pay a finisher about $0.50–$1.50 per sq ft for the part that shows.
  5. Fix the leak before the drywall.A $360–$2,400 water-damage repair under a live leak will be back in a month. Plumber or roofer first, drywall second, and keep the repair receipts for insurance.
  6. Get the finish level and extras in writing.Primer, texture matching, debris haul-away and moving furniture are the usual add-ons. A quote that lists them is cheaper to compare and harder to pad later.
Drywall Cost in San Francisco: What the Quote Should Include

San Francisco drywall companies often quote by the sheet or the square foot over the phone. Before you agree to the work, get these in writing:

  • The finish level by number (Level 4 for paint; Level 5 for smooth or glossy walls)
  • Board type and thickness for each room: 1/2-inch, 5/8-inch fire-rated, moisture-resistant, soundproof
  • Square footage or sheet count the price is based on
  • Whether primer is included, and who paints
  • Texture: match existing, apply new, or leave smooth
  • Demolition, debris haul-away and floor protection
  • Minimum charge and the number of visits (hanging, coats, sanding)
  • Warranty on cracks, nail pops and seams
Frequently asked questions — Drywall cost in San Francisco
How much does drywall cost in San Francisco?

$965–$2,300 to hang and finish one 12×12 room, labor and materials, and $1,500 is typical. That's $1.75–$3.70 per sq ft, or $60–$115 a sheet.

How much does drywall repair cost in San Francisco?

$90–$300 for a small hole, $180–$540 for a large one, $120–$480 for cracks and nail pops, and $360–$2,400 for water damage. Most companies charge a $150–$240 minimum per visit.

What does drywall cost per square foot in San Francisco?

$1.75–$3.70 per sq ft hung and finished to Level 4, labor and materials. Level 5 smooth is $2.05–$4.05; skim-coating existing walls $1.20–$3.60.

How much does it cost to fix a ceiling in San Francisco?

$300–$1,450 for a sag, stain or hole, and $590–$1,800 to tear out and replace a whole 12×12 room ceiling. Water damage with the repair runs $660–$3,850.

Can I hang drywall myself?

Hanging, yes: materials for a room are $200–$400 and a lift rents for about $40 a day. Finishing is the skilled part; most DIYers hire it out at about $0.50–$1.50 per sq ft.

How much does it cost to remove a popcorn ceiling in San Francisco?

$180–$540 per 100 sq ft to scrape, skim and prime an asbestos-free ceiling. Test first in any home built before 1980 ($30–$75 by mail); asbestos abatement costs far more.

How much is a skim coat in San Francisco?

$1.20–$3.60 per sq ft, or $480–$965 for the walls of a 12×12 room. It smooths texture and small damage without new board, but the room must be repainted after.

Do I need a permit for drywall?

In California any drywall job of $1,000 or more, labor and materials together, needs a contractor licensed by the state board (the C-9 Drywall classification or a general B license). A permit is rarely needed for like-for-like drywall, but it is for fire-rated walls and anything structural. Texture applied before about 1980 may contain asbestos, so test ($30–$75 by mail) before scraping a popcorn ceiling in an older San Francisco home.

How much does it cost to drywall a garage or a whole house in San Francisco?

$1,400–$4,400 for a two-car garage, walls and ceiling, with fire-rated board where the code requires it. A whole 2,000 sq ft house is $10,450–$32,600 hung and finished.

What's included in a San Francisco drywall quote?

Board, tape, mud, hanging, finishing to the level named, and cleanup. Often extra: primer and paint, debris haul-away ($300–$500), texture ($95–$235 per 100 sq ft) and asbestos testing in older homes.

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Prices for the San Francisco metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, dated city price pages, contractor and retailer price lists, federal producer-price and wage data. No drywall company can pay to change them, so always get a couple of quotes. Last reviewed November 2026. Read our full methodology →

Get a fair drywall quote in San Francisco

Local drywall contractors · Free quotes · No obligation, no spam.

Get quotes in San Francisco →Max 2 drywall contractors will contact you
Get quotes in San FranciscoMax 2 drywall contractors · free · no spam→