Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does a fence cost in Raleigh?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched13 min read
Fence installation cost

Fence installation costs in Raleigh

Raleigh, NCChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Raleigh, NC
$2,600–$6,450per 150 ft

Most fence companies in Raleigh charge $2,600–$6,450 for 150 ft of wood privacy fence 6 ft tall, pressure-treated pine, posts in concrete, with $4,000 the typical bill. That is $17–$43 a linear foot; vinyl runs $24–$58 and chain link $12–$29 a foot.

How we get this data
Typical
$4,000
Low end
$1,350
High end
$8,150
150 ft wood privacy
$2,600–$6,450
Wood, per linear ft
$17–$43
Vinyl, per linear ft
$24–$58
Chain link, per linear ft
$12–$29

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local fence companies send you a real quote. Free, no obligation.

Get my fair quote →
Typical fence installation price: Raleigh vs nearby citiesTypical price, per 150 ft. The line marks the US typical.
Raleigh, NCThis guide $4,000
Durham, NC $3,900

The typical Raleigh price is $4,000, 5% below the US typical of $4,200.

Where Raleigh sits among 195 US metrosNumber of metros at each typical fence installation price, per 150 ft.

Raleigh's price band

Raleigh is cheaper than 72% of the 195 US metros we price for fence installation work.

Expect $2,600–$6,450 for 150 ft of 6 ft wood privacy fence in Raleigh, with $4,000 the going rate. The same run in vinyl is $3,600–$8,700 and in cedar $4,050–$8,550; 4 ft chain link is $1,800–$4,350. Fence crews here bill about $38–$80 an hour when they work by the hour, but nearly every fence is quoted by the foot.

As a large metro with mid-range labor prices, Raleigh prices a wood privacy fence about 5% below the US typical. Local pay drives it: fence erectors in the Raleigh-Cary metro earn a median $40,570 a year (about 15% below the US median), while a pressure-treated picket costs about $2.98 everywhere.

Fence permits and height limits are set by your city or county, not the state: most allow a 6 ft fence on a rear or side line without a permit and cap front yards at 3–4 ft, and taller fences need a permit or variance. Pool barriers follow the building code almost everywhere — at least 48 in. tall with a self-closing, self-latching gate — and are inspected. Ask the fence company for proof of insurance and, where your state licenses contractors, the license number. This is general information, not legal advice.

Comparing cities, or after the US-wide picture? See the national guide: Fence cost in the USA.

Quick answer

$2,600–$6,450 to install 150 ft of 6 ft wood privacy fence in Raleigh — pressure-treated pine, posts in concrete — typically $4,000 ($17–$43 a linear foot). Vinyl runs $24–$58 a foot, chain link $12–$29, and a walk gate $195–$665. Verified November 2026. Get free Raleigh quotes →

  • 150 ft wood privacy fence: $2,600–$6,450 ($4,000 typical)
  • Per linear ft: wood $17–$43; vinyl $24–$58; chain link $12–$29
  • Cedar $27–$57/ft; aluminum $24–$58/ft; wrought iron $29–$95/ft
  • Walk gate $195–$665; driveway gate $780–$3,850; post replacement $120–$375
  • Old fence removal $3–$9/ft; permit $49–$485 where needed

Prices verified November 2026 · Cross-referenced against 17+ American pricing sources · See methodology

Detailed pricing — Fence installation cost in Raleigh 2026

Installed prices, labor and materials, posts set in concrete, unless the row says otherwise. Raleigh metro, re-verified November 2026. Gates, tear-out, permits and staining are their own rows.

ServiceLowTypicalHigh
Wood privacy fence, 6 ft, pressure-treated pine, 150 linear ft, installedper 150 ft$2,600per 150 ft$4,000$6,450
Wood privacy fence, 6 ft, pressure-treated pineper linear ft$17per linear ft$27$43
Cedar privacy fence, 6 ftper linear ft$27per linear ft$38$57
Wood picket fence, 3–4 ftper linear ft$15per linear ft$24$38
Vinyl (PVC) privacy fence, 6 ftper linear ft$24per linear ft$39$58
Chain-link fence, 4 ft, galvanizedper linear ft$12per linear ft$19$29
Chain-link fence, 6 ft, black vinyl-coatedper linear ft$18per linear ft$27$38
Aluminum ornamental fence, 4 ftper linear ft$24per linear ft$39$58
Wrought iron or steel ornamental fence, 5–6 ftper linear ft$29per linear ft$48$95
Composite privacy fence, 6 ftper linear ft$29per linear ft$44$65
Corrugated steel panel privacy fence, 6 ftper linear ft$24per linear ft$33$53
Split-rail fence, 2 or 3 railsper linear ft$10per linear ft$17$29
Privacy fence, 8 ft tall, wood or vinylper linear ft$29per linear ft$43$70
Aluminum pool fence, 4–5 ft, code-compliant, with self-closing gateper linear ft$24per linear ft$39$65
Frameless glass pool fenceper linear ft$100per linear ft$195$390
Concrete block (CMU) wall, 6 ft, stucco finishper linear ft$58per linear ft$95$150
Wood (timber) retaining wall, up to 3 ft highper linear ft$39per linear ft$70$115
Walk gate, 4 ft wide, wood or vinyl, installedper gate$195per gate$380$665
Double driveway gate, 10–12 ft, manual, installedper gate$780per gate$1,750$3,850
Automatic gate opener, added to a driveway gateper gate$985per gate$2,150$4,350
Replace one fence post, set in concreteper post$120per post$210$375
Fence repair: replace boards and a rail in one 8 ft sectionper section$145per section$305$560
Remove and haul away an old fenceper linear ft$3per linear ft$5$9
Stain or seal a wood fence, 150 ft, one sideper fence$575per fence$1,100$1,950
fence installation jobs in Raleigh: what they costPer linear ft, low to high with the typical price marked. Every line is in the table above.
Frameless glass pool fence $195$100–$390
Concrete block (CMU) wall, 6 ft, stucco finish $95$58–$150
Wood (timber) retaining wall, up to 3 ft high $70$39–$115
Wrought iron or steel ornamental fence, 5–6 ft $48$29–$95
Composite privacy fence, 6 ft $44$29–$65
Privacy fence, 8 ft tall, wood or vinyl $43$29–$70
Vinyl (PVC) privacy fence, 6 ft $39$24–$58
Aluminum ornamental fence, 4 ft $39$24–$58
Aluminum pool fence, 4–5 ft, code-compliant, with self-closing gate $39$24–$65
Cedar privacy fence, 6 ft $38$27–$57
Corrugated steel panel privacy fence, 6 ft $33$24–$53
Wood privacy fence, 6 ft, pressure-treated pine $27$17–$43
Already got a quote?
Check it against these Raleigh prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local fence companies in Raleigh

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What kind of fence do you need?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 17+ American pricing sources · See methodology

Figures are for the Raleigh metro area. Trip charges can apply on the far edges; tight access and old concrete footings in Downtown & Glenwood South cost the most to work around.

How fence installation costs vary across Raleigh

Fence prices across Raleigh

Where you live changes the labor, not the lumber. Tight lots in Downtown & Glenwood South take the longest; fences in North Raleigh price near the city typical, with longer runs.

Fence installation prices across RaleighTypical range by part of the metro, per 150 ft. The line marks the Raleigh typical.
Downtown & Glenwood South8–12% above the city average $18–$48per 150 ft
Southeast RaleighStandard to 6% above $18–$46per 150 ft
North RaleighStandard; longer runs and more gates $17–$45per 150 ft
Cary & ApexStandard; longer runs and more gates $17–$45per 150 ft

Downtown & Glenwood South

8–12% above the city average
Downtown, Glenwood South, Warehouse District
Wood, per linear ft
$18–$48 per linear ft
150 ft privacy fence
$2,800–$7,200 / 150 ft privacy fence

The priciest part of the metro for a fence crew: no room for a trailer, posts dug by hand next to utilities, and neighbors on both sides to agree with. Short runs cost more per foot here.

Southeast Raleigh

Standard to 6% above
Southeast Raleigh, Garner, Knightdale
Wood, per linear ft
$18–$46 per linear ft
150 ft privacy fence
$2,700–$6,850 / 150 ft privacy fence

A fix-and-flip area where privacy fences are replaced on a schedule. Quotes vary widely, so get two and make both state post depth and concrete.

North Raleigh

Standard; longer runs and more gates
North Hills, Brier Creek, Wake Forest
Wood, per linear ft
$17–$45 per linear ft
150 ft privacy fence
$2,600–$6,700 / 150 ft privacy fence

Bigger lots and longer fence lines, many with HOA rules on height, style and color. Expect average rates per foot but larger totals, and an HOA approval step before work starts.

Cary & Apex

Standard; longer runs and more gates
Cary, Apex, Morrisville
Wood, per linear ft
$17–$45 per linear ft
150 ft privacy fence
$2,600–$6,700 / 150 ft privacy fence

Plenty of homes with the original builder-grade fence coming due for replacement. Expect average rates plus more feet per job.

What you'll actually pay — job by job

Real-World Fence Costs in Raleigh

Here's what common fence installation jobs cost in Raleigh in 2026, labor, materials and posts set in concrete included.

150 ft of 6 ft wood privacy fence, open lot, no old fence — 2 to 3 days

$2,600–$4,000

Mark the line, dig 19 post holes 2 ft deep, set 4x4 posts in concrete, hang rails and nail up about 300 pickets. Most Raleigh backyards land here; rocky ground, slopes and a tear-out push the bill toward $6,450.

Replace a failing 150 ft fence: tear-out, haul-away and new wood privacy fence

$3,025–$7,800

Removing the old fence and its concrete footings costs $425–$1,350 on top of the $2,600–$6,450 for the new one, about $4,685 in all. Old footings in the way often mean new post holes offset a few inches, which is normal.

Fence a full backyard: 200 ft of wood privacy with two walk gates

$3,840–$9,930

200 ft at about $27 a foot plus two gates at $380 each comes to about $6,110 in Raleigh. Gates are the part that sags first, so ask for steel-framed gate kits and adjustable hinges.

Pool fence: 60 ft of 4–5 ft aluminum with a self-closing gate, permitted

$1,499–$4,385

60 ft at $39 a foot plus a $49–$485 permit is about $2,495. Pool barriers must be at least 48 in. tall with a self-closing, self-latching gate that opens away from the pool, and almost every city inspects them.

Storm repair: 3 blown-down sections and 2 rotted posts

$675–$2,450

Three 8 ft sections rebuilt at $305 each and two posts reset in concrete at $210 each is about $1,335. If more than a third of the posts are rotted at ground level, price a full replacement ($2,600–$6,450) instead.

How much does a fence cost in Raleigh?

A 150 ft wood privacy fence in Raleigh costs $2,600 to $6,450. The middle of the market, about $4,000, covers 4x4 pressure-treated posts set 2 ft deep in concrete every 8 ft, two or three 2x4 rails, dog-ear pickets, hardware and cleanup. Gates ($195–$665), staining ($575–$1,950) and removal of the old fence ($3–$9 a foot) are extra lines.

Material changes the bill more than anything else. The same 150 ft in cedar is $4,050–$8,550, in vinyl $3,600–$8,700, in 4 ft chain link $1,800–$4,350 and in aluminum $3,600–$8,700. Prices re-checked against 17 sources in November 2026.

Fence prices in Raleigh (2026): by material, per linear foot

Wood privacy fence costs $17–$43 a linear foot installed in Raleigh, vinyl $24–$58, chain link $12–$29 and aluminum $24–$58.

Line on the quoteLowTypicalHigh
Wood privacy, 6 ft, pressure-treated pine$17$27$43
Cedar privacy, 6 ft$27$38$57
Wood picket, 3–4 ft$15$24$38
Vinyl privacy, 6 ft$24$39$58
Chain link, 4 ft galvanized$12$19$29
Aluminum ornamental, 4 ft$24$39$58
Wrought iron or steel, 5–6 ft$29$48$95
Composite privacy, 6 ft$29$44$65

The lumber is the cheap part. Pickets, posts and concrete for 150 ft cost $1,800–$4,200 at a big-box store; the Raleigh price of $2,600–$6,450 is mostly two or three days of digging, setting and nailing.

What moves a fence quote in Raleigh:

  • Material — per foot, pressure-treated wood is $17–$43, vinyl $24–$58, chain link $12–$29, aluminum $24–$58, wrought iron $29–$95.
  • Height — 8 ft runs $29–$70 a foot against $17–$43 for 6 ft, needs longer posts set deeper, and usually a permit.
  • The old fence — tear-out and disposal adds $3–$9 a foot, $425–$1,350 for 150 ft, more if the old posts are in concrete.
  • Ground and access — rock, roots, slopes and hand-dug holes next to gas or sprinkler lines add time; so does carrying 300 pickets through a side gate.
  • Gates, permits and surveys — a walk gate is $195–$665, a driveway gate $780–$3,850, a permit $49–$485 where one is needed, and a boundary survey $285–$925 if the line is in doubt.

Ask every Raleigh fence company the same five things: post size and depth, how much concrete per post, picket thickness and grade, whether tear-out and haul-away are included, and the warranty on posts and gates. Compare those, not the headline price. Get a quote for your fence job →

Fence Cost in Raleigh by Length and Material

Quick answer

100 ft of wood privacy fence: $1,750–$4,300. 150 ft: $2,600–$6,450. 200 ft: $3,450–$8,600. 300 ft: $5,200–$12,900. The same 150 ft in vinyl is $3,600–$8,700, in cedar $4,050–$8,550, in chain link $1,800–$4,350.

Worked example: a typical Raleigh quarter-acre lot has about 200 ft of back and side fence line. In 6 ft pressure-treated wood that is about $5,350, plus two walk gates at $380 each, so roughly $6,110. If the old fence has to come out first, add $1,000.

Material moves the total more than length does. The same 200 ft in vinyl is about $7,800 and in 4 ft chain link about $3,800, which is why two quotes for one yard can look nothing alike until you line up what each one is made of.

Raleigh Fence Costs by Material and Type

Fence typeCostBest for
Wood privacy fence (pressure-treated pine), 6 ft$17–$43 per linear ftThe standard backyard fence and the cheapest solid screen. Lasts 15–20 years with staining every 2–3 years.
Cedar privacy fence, 6 ft$27–$57 per linear ftRot- and insect-resistant without chemicals and looks better as it grays. Lasts 20–30 years.
Wood picket fence, 3–4 ft$15–$38 per linear ftFront yards and curb appeal, where most cities cap height at 3–4 ft anyway.
Vinyl (PVC) privacy fence, 6 ft$24–$58 per linear ftNo staining, no rot, a hose-down once a year. Costs more up front and lasts 25–40 years.
Chain-link fence, 4 ft galvanized$12–$29 per linear ftDog yards, side yards and budgets. Black vinyl-coated 6 ft chain link runs $18–$38 per ft.
Aluminum ornamental fence, 4 ft$24–$58 per linear ftPool enclosures and front yards that need to stay open. Never rusts; the look of iron at a lower price.
Wrought iron or steel ornamental, 5–6 ft$29–$95 per linear ftSecurity and a formal look. Heavy, strong, and needs repainting every few years to stop rust.
Composite privacy fence, 6 ft$29–$65 per linear ftThe look of wood with vinyl's upkeep. The priciest common privacy material.
Corrugated steel panel privacy fence, 6 ft$24–$53 per linear ftA modern look that stands up to wind and termites; popular in the Southwest and Texas.
Split-rail fence, 2 or 3 rails$10–$29 per linear ftBig lots and property lines where you mark the edge, not screen it. Add wire mesh for dogs.
Pool fence (aluminum, 4–5 ft, self-closing gate)$24–$65 per linear ftMeeting the pool-barrier code: 48 in. tall or more, no gaps a 4 in. ball passes, self-closing, self-latching gate. Glass runs $100–$390 per ft.
Concrete block (CMU) wall, 6 ft, stucco$58–$150 per linear ftThe standard yard wall in Phoenix, Las Vegas and much of Southern California: fireproof, termite-proof, lasts 50+ years.
Cost by fence type in RaleighTypical range, per linear ft.
Wood privacy fence (pressure-treated pine), 6 ft $17–$43per linear ft
Cedar privacy fence, 6 ft $27–$57per linear ft
Wood picket fence, 3–4 ft $15–$38per linear ft
Vinyl (PVC) privacy fence, 6 ft $24–$58per linear ft
Chain-link fence, 4 ft galvanized $12–$29per linear ft
Aluminum ornamental fence, 4 ft $24–$58per linear ft
Wrought iron or steel ornamental, 5–6 ft $29–$95per linear ft
Composite privacy fence, 6 ft $29–$65per linear ft
Corrugated steel panel privacy fence, 6 ft $24–$53per linear ft
Split-rail fence, 2 or 3 rails $10–$29per linear ft
Pool fence (aluminum, 4–5 ft, self-closing gate) $24–$65per linear ft
Concrete block (CMU) wall, 6 ft, stucco $58–$150per linear ft
Raleigh tip: before any quote, find your property pins or order a survey ($285–$925). A fence built a foot over the line is the most expensive fence there is, because it comes down.

Materials vs. what you pay — the Raleigh fence bill

At a big-box store, a pressure-treated dog-ear picket is about $2.98, a 4x4x8 post about $14 and a 50 lb bag of concrete about $6. For 150 ft of 6 ft privacy fence that is roughly $1,800–$4,200 of materials inside a $2,600–$6,450 job in Raleigh. The difference pays for a crew of two or three for two or three days, the auger or hand digging, the truck, disposal and the warranty.

Labor is about half of a wood fence bill and a third of a vinyl one, which is why wood prices differ more by city than vinyl prices do. Where fence crews earn more, a wood fence costs more; a vinyl panel costs about the same in Raleigh as anywhere else.

What's included in a Raleigh fence quote (and what costs extra)

A standard quote covers marking the line, digging and setting posts in concrete, rails, pickets or panels, hardware, basic cleanup and a workmanship warranty. The headline price often leaves out:

  • Tearing out the old fence — $3–$9 a foot, $425–$1,350 for 150 ft
  • Gates — $195–$665 for a walk gate, $780–$3,850 for a double driveway gate
  • Permit and survey — $49–$485 for a permit where one is needed; $285–$925 for a boundary survey
  • Staining or sealing — $575–$1,950 for 150 ft, a few weeks after the fence goes up

Ask for post size, depth and concrete in writing, and for proof of liability insurance.

What Affects Fence Costs in Raleigh

Material

Per linear foot in Raleigh: pressure-treated wood $17–$43, cedar $27–$57, vinyl $24–$58, chain link $12–$29, aluminum $24–$58, composite $29–$65, wrought iron $29–$95. Material is the single biggest choice you make.

Height and length

Taller costs more per foot — 8 ft runs $29–$70 against $17–$43 for 6 ft — and longer costs less per foot, since setup and travel are spread over more posts. Front-yard fences are capped at 3–4 ft in most cities.

Site and access

Rock, tree roots, slopes and buried lines turn a 20-minute post hole into an hour. A side yard too narrow for a wheelbarrow means every picket is carried by hand.

Removing the old fence

Tear-out and disposal adds $3–$9 a linear foot, about $425–$1,350 for 150 ft. Posts set in concrete cost more to pull than posts in dirt.

Local rules and the property line

Fence permits and height limits are set by your city or county, not the state: most allow a 6 ft fence on a rear or side line without a permit and cap front yards at 3–4 ft, and taller fences need a permit or variance. Pool barriers follow the building code almost everywhere — at least 48 in. tall with a self-closing, self-latching gate — and are inspected. Ask the fence company for proof of insurance and, where your state licenses contractors, the license number.

Labor rates in Raleigh

Fence erectors in the Raleigh-Cary metro earn a median $40,570 a year in federal wage data, about 15% below the US median. Labor is about half of a wood fence bill, so Raleigh prices land about 5% below the US typical of $4,200 for 150 ft.

Gates and extras

A walk gate is $195–$665, a manual double driveway gate $780–$3,850 and an automatic opener $985–$4,350 more. Staining a new wood fence runs $575–$1,950 for 150 ft and should wait a few weeks for the wood to dry.

How to Save Money on a Fence in Raleigh
  1. Share the line with your neighbor.A boundary fence serves two yards. Splitting $4,000 two ways is the single biggest saving there is, and many neighbors agree to it in writing before work starts.
  2. Price the whole line in one job.Per foot, a 200 ft fence costs less than a 100 ft one because the crew's setup, travel and disposal are spread over more posts. Do all sides at once.
  3. Pick the material for the job, not the look.Chain link ($12–$29 a foot) fences a dog yard for a third of the price of wood; wood ($17–$43) screens a backyard for less than vinyl ($24–$58); vinyl saves the $575–$1,950 staining bill every few years.
  4. Do the tear-out yourself.Pulling the old pickets and rails yourself saves $425–$1,350 on 150 ft. Leave posts in concrete to the crew unless you have a jack and a strong back.
  5. Book the slow season.Fence crews in Raleigh are busiest from spring through early fall. Late fall and winter quotes are often lower where the ground is workable.
  6. Get post depth and concrete in writing.Two quotes $1,400 apart on the same 150 ft usually differ on posts, not pickets: 4x4 posts set 2 ft deep in concrete every 8 ft against posts in dirt every 10 ft. Make both quotes say the same thing.
Fence Cost in Raleigh: What the Quote Should Include

Raleigh fence companies quote by the linear foot, with gates and tear-out as separate lines. Before you pay a deposit, get these in writing:

  • The exact length in feet, the height, and a drawing showing the line and gate positions
  • Material, grade and thickness: post size, rail count, picket thickness, panel brand for vinyl
  • Post depth, spacing, and how much concrete per post
  • Whether the old fence is torn out and hauled away, and the dump fee
  • Gates as separate lines: size, hardware, and the frame material
  • Who pulls the permit, who locates underground utilities (811), and who finds the property pins
  • Proof of liability insurance, and the license or registration number where your state has one
  • Start and finish dates, payment stages, and the warranty on posts, panels and gates
Frequently asked questions — Fence installation cost in Raleigh
How much does a fence cost in Raleigh?

$2,600–$6,450 to install 150 ft of 6 ft wood privacy fence, pressure-treated pine with posts in concrete, and $4,000 is typical. That is about $17–$43 a linear foot.

How much does a fence cost per linear foot in Raleigh?

Installed: wood privacy $17–$43, cedar $27–$57, vinyl $24–$58, 4 ft chain link $12–$29, aluminum $24–$58, wrought iron $29–$95, composite $29–$65.

How much does a vinyl fence cost in Raleigh?

$24–$58 a linear foot for 6 ft vinyl privacy, or $3,600–$8,700 for 150 ft. It costs more than wood up front but never needs staining.

How much does a chain-link fence cost in Raleigh?

$12–$29 a foot for 4 ft galvanized ($1,800–$4,350 for 150 ft) and $18–$38 a foot for 6 ft black vinyl-coated.

How much does fence repair cost in Raleigh?

About $145–$560 to rebuild one 8 ft section (boards and a rail) and $120–$375 to replace a post set in concrete. Three sections and two posts after a storm is about $1,335.

How much does it cost to remove an old fence in Raleigh?

$3–$9 a linear foot including haul-away, about $425–$1,350 for 150 ft. Posts set in concrete cost more to pull.

Do I need a permit to build a fence in North Carolina?

Fence permits and height limits are set by your city or county, not the state: most allow a 6 ft fence on a rear or side line without a permit and cap front yards at 3–4 ft, and taller fences need a permit or variance. Pool barriers follow the building code almost everywhere — at least 48 in. tall with a self-closing, self-latching gate — and are inspected. Ask the fence company for proof of insurance and, where your state licenses contractors, the license number.

How much does a gate cost in Raleigh?

A 4 ft walk gate is $195–$665 installed, a manual double driveway gate $780–$3,850, and an automatic opener adds $985–$4,350.

How deep should fence posts go?

About a third of the above-ground height, so 2 ft for a 6 ft fence, and below the frost line where the ground freezes. Each post sits in 1–2 bags of concrete; posts set in dirt are the most common reason a fence leans in five years.

Who pays for a fence between neighbors in North Carolina?

In most states, a fence on the line is shared property once both neighbors use it, but there is no duty to split the cost of a new one unless local law or an agreement says so. Get any cost-sharing deal in writing before work starts. This is general information, not legal advice.

Prices verified November 2026 · Cross-referenced against 17+ American pricing sources · See methodology

Prices for the Raleigh metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, dated city price pages, fence company price lists, big-box material prices and federal wage data. No fence company can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read our full methodology →

Get a fair fence installation quote in Raleigh

Local fence companies · Free quotes · No obligation, no spam.

Get quotes in Raleigh →Max 2 fence companies will contact you
Get quotes in RaleighMax 2 fence companies · free · no spam→