Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does concrete cost in Brooklyn?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched13 min read
Concrete cost

Concrete costs in Brooklyn

Brooklyn, NYChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Brooklyn, NY
$2,550–$6,200per 400 sq ft

Most concrete contractors in Brooklyn charge $2,550–$6,200 to pour a 2-car driveway 400 sq ft, 4 in thick, plain finish, with $4,000 the typical bill. A plain slab runs $6–$12 a square foot; a 12 × 16 patio $1,200–$2,600.

How we get this data
Typical
$4,000
Low end
$1,750
High end
$9,900
2-car driveway
$2,550–$6,200
Plain slab, per sq ft
$6–$12
Stamped, per sq ft
$11–$20
Ready-mix, per cubic yard
$130–$205

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local concrete contractors send you a real quote. Free, no obligation.

Get my fair quote →
Typical concrete price: Brooklyn vs nearby citiesTypical price, per 400 sq ft. The line marks the US typical.
New York, NY $4,350
Brooklyn, NYThis guide $4,000
Newark, NJ $3,900
Stamford, CT $3,800
Trenton, NJ $3,800

The typical Brooklyn price is $4,000, 5% above the US typical of $3,800.

Where Brooklyn sits among 195 US metrosNumber of metros at each typical concrete price, per 400 sq ft.

Brooklyn's price band

Brooklyn is pricier than 91% of the 195 US metros we price for concrete work.

A concrete contractor in Brooklyn charges $2,550–$6,200 to pour a 20 × 20 ft driveway, 4 in thick with a broom finish, and most homeowners pay about $4,000. Removing the old driveway first adds $800–$2,800, a stamped finish takes the same driveway to $4,400–$8,000, and ready-mix concrete costs $130–$205 a cubic yard delivered.

Brooklyn is a big, high-cost metro for construction labor. A driveway here is about 5% above the US typical of $3,800. About half of a flatwork bill is labor, so local pay moves the price; the other half — ready-mix at $130–$205 a yard, gravel, forms and steel — moves less from city to city.

New York City requires a Home Improvement Contractor license from the Department of Consumer and Worker Protection for driveways, patios and other home improvement work, and any sidewalk, curb cut or apron work needs a Department of Transportation permit. Property owners, not the city, are responsible for the sidewalk in front of their building. This is general information, not legal advice.

Comparing cities, or after the US-wide picture? See the national guide: Concrete cost in the USA.

Quick answer

$2,550–$6,200 to pour a 2-car concrete driveway in Brooklyn — 400 sq ft, 4 in thick, plain finish — typically $4,000. A plain slab runs $6–$12 a square foot, stamped concrete $11–$20, and a 12 × 16 patio $1,200–$2,600. Verified November 2026. Get free Brooklyn quotes →

  • 2-car driveway, 400 sq ft, 4 in: $2,550–$6,200 ($4,000 typical)
  • Plain slab $6–$12/sq ft; 6 in with rebar $8–$15; stamped $11–$20
  • Patio 12 × 16 $1,200–$2,600; garage slab 24 × 24 $4,200–$8,850; steps $1,050–$3,300
  • Remove old concrete $2–$7/sq ft; ready-mix $130–$205 per cubic yard
  • Pump truck $530–$1,450; sealing $375–$940; crew labor $50–$105/hr

Prices verified November 2026 · Cross-referenced against 20+ American pricing sources · See methodology

Detailed pricing — Concrete cost in Brooklyn 2026

Installed prices with labor, 3,000–4,000 psi concrete, gravel base and forms unless the row says otherwise. Brooklyn metro, re-verified November 2026. Removal, pumping, decorative finishes and sealing are their own rows.

ServiceLowTypicalHigh
Concrete driveway, 2-car, 20 × 20 ft (400 sq ft), 4 in, plain finish, installedper 400 sq ft$2,550per 400 sq ft$4,000$6,200
Plain concrete slab, 4 in, broom finish, installedper sq ft$6per sq ft$9$12
Concrete slab, 6 in with rebar (trucks, RVs, shops), installedper sq ft$8per sq ft$12$15
Rebar or wire-mesh reinforcement, added to a slab, per 100 sq ftper 100 sq ft$105per 100 sq ft$185$310
Colored concrete (integral color), installedper sq ft$8per sq ft$10$13
Exposed aggregate finish, installedper sq ft$8per sq ft$12$14
Stamped concrete, installedper sq ft$11per sq ft$15$20
Stain an existing slab (acid or water-based), sealedper sq ft$3per sq ft$6$10
Polish an existing concrete slabper sq ft$3per sq ft$6$10
New slab poured and polishedper sq ft$9per sq ft$15$22
Resurface or overlay existing concrete (spray-on or microtopping)per sq ft$3per sq ft$5$8
Stamped or exposed-aggregate driveway, 2-car, 400 sq ftper 400 sq ft$4,400per 400 sq ft$6,000$8,000
Concrete walkway, 4 × 50 ft (200 sq ft), 4 in, plainper walkway$1,250per walkway$1,900$2,700
Concrete patio, 12 × 16 ft (192 sq ft), plain broom finishper patio$1,200per patio$1,850$2,600
Shed or small slab, 10 × 12 ft (120 sq ft), 4 inper slab$900per slab$1,250$1,750
Garage slab, 24 × 24 ft (576 sq ft), 4–6 in with rebarper slab$4,200per slab$6,100$8,850
Poured concrete steps, 3–4 risers, 4 ft wideper set$1,050per set$1,900$3,300
Concrete footings, 12 × 24 in with rebar, per linear ftper linear ft$21per linear ft$35$50
Slab-on-grade foundation (monolithic, thickened edge), per sq ftper sq ft$6per sq ft$10$14
Remove and haul away old concrete, 4 in unreinforcedper sq ft$2per sq ft$4$7
Seal a 400 sq ft driveway or patio (pro, one coat)per job$375per job$640$940
Ready-mix concrete, 3,000–4,000 psi, deliveredper cubic yard$130per cubic yard$165$205
Concrete pump truck (line or boom), per jobper job$530per job$900$1,450
Concrete crew labor, per worker per hourper hour$50per hour$75$105
concrete jobs in Brooklyn: what they costPer sq ft, low to high with the typical price marked. Every line is in the table above.
Stamped concrete, installed $15$11–$20
New slab poured and polished $15$9–$22
Concrete slab, 6 in with rebar (trucks, RVs, shops), installed $12$8–$15
Exposed aggregate finish, installed $12$8–$14
Colored concrete (integral color), installed $10$8–$13
Slab-on-grade foundation (monolithic, thickened edge), per sq ft $10$6–$14
Plain concrete slab, 4 in, broom finish, installed $9$6–$12
Stain an existing slab (acid or water-based), sealed $6$3–$10
Polish an existing concrete slab $6$3–$10
Resurface or overlay existing concrete (spray-on or microtopping) $5$3–$8
Remove and haul away old concrete, 4 in unreinforced $4$2–$7
Already got a quote?
Check it against these Brooklyn prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local concrete contractors in Brooklyn

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need poured?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 20+ American pricing sources · See methodology

Prices cover the Brooklyn metro. Outlying towns can pay delivery charges from the batch plant; tight lots in Downtown Brooklyn & Park Slope and Williamsburg & Greenpoint sit at the top of each range for pumping and demolition.

How concrete costs vary across Brooklyn

Concrete prices across Brooklyn

Where you live changes the access, not the concrete. Tight lots in Downtown Brooklyn & Park Slope need pumps and demolition; jobs in South & East Brooklyn tend to come in at or under the city typical.

Concrete prices across BrooklynTypical range by part of the metro, per 400 sq ft. The line marks the Brooklyn typical.
Williamsburg & GreenpointStandard to 6% above $2,600–$6,550per 400 sq ft
Bushwick & Bed-StuyStandard to 6% above $2,600–$6,550per 400 sq ft
Downtown Brooklyn & Park Slope8–15% above the city average $2,750–$7,150per 400 sq ft
South & East BrooklynLower labor, more delivery miles $2,450–$6,450per 400 sq ft

Williamsburg & Greenpoint

Standard to 6% above
Williamsburg, Greenpoint, North Brooklyn
2-car driveway
$2,600–$6,550 per 400 sq ft
Plain slab
$610–$1,250 / 100 sq ft of 4-in slab

Older homes being redone one project at a time. Patios and walkways are the common jobs; a driveway here usually means tearing out the old one first.

Bushwick & Bed-Stuy

Standard to 6% above
Bushwick, Bed-Stuy, Crown Heights
2-car driveway
$2,600–$6,550 per 400 sq ft
Plain slab
$610–$1,250 / 100 sq ft of 4-in slab

Lots of fix-and-flip work. Quotes vary widely, so get two for the same thickness, base and reinforcement, and make sure both include hauling the old concrete away.

Downtown Brooklyn & Park Slope

8–15% above the city average
DUMBO, Gowanus, Park Slope, Prospect Heights
2-car driveway
$2,750–$7,150 per 400 sq ft
Plain slab
$650–$1,400 / 100 sq ft of 4-in slab

The priciest part of the metro for flatwork: older slabs to break out and haul, little room to stage gravel and forms, and a pump or buggy needed to reach back yards. Small jobs here often pay a short-load fee on top.

South & East Brooklyn

Lower labor, more delivery miles
Flatbush, Canarsie, Sunset Park, East New York
2-car driveway
$2,450–$6,450 per 400 sq ft
Plain slab
$575–$1,250 / 100 sq ft of 4-in slab

The cheapest rates in the metro, with delivery sometimes billed separately. Rural properties may wait longer for a slot in the spring and fall rush.

What you'll actually pay — job by job

Real-World Concrete Costs in Brooklyn

Here's what common concrete jobs cost in Brooklyn in 2026, labor, 4 in of 3,000–4,000 psi concrete, gravel base and forms included.

New 2-car driveway on a cleared lot — 2 to 3 days, 7 days before you park on it

$2,550–$4,000

Grade, 4 in of compacted gravel, forms, wire mesh, 5.5 yards of 4 in concrete, broom finish and control joints. Most Brooklyn driveways with truck access land here; a slope, a pump or 6 in with rebar pushes the bill toward $6,200.

Remove and replace a cracked 2-car driveway — 3 to 4 days

$3,350–$9,000

Breaking out and hauling 400 sq ft of old concrete runs $800–$2,800 (about 10 tons to the landfill at $90–$160 a ton), then the new pour at $2,550–$6,200. Reinforced old slabs cost more to cut up.

Stamped patio, 12 × 16 ft, one color and pattern — 1 to 2 days

$2,100–$3,850

The same patio in plain broom-finished concrete is $1,200–$2,600; stamping, color and sealer take it to $2,100–$3,850. Plan on resealing every 2–3 years at about $375–$940.

Garage slab, 24 × 24 ft, 4–6 in with rebar — 1 to 2 days

$4,200–$8,850

About 8 cubic yards of 4,000 psi concrete with a vapor barrier and a rebar grid, floated smooth. In Brooklyn that is $4,200–$8,850; a 6 in slab for a lift or a heavy truck prices at $8–$15 a square foot.

Shed slab or small parking pad, 10 × 12 ft — half a day

$900–$1,750

Small pours pay the most per square foot: $900–$1,750 for 120 sq ft works out to $7–$14 a square foot because the crew's setup and the ready-mix plant's short-load fee ($40–$110 a yard short) are spread over very little concrete.

How much does concrete cost in Brooklyn?

Between $2,550 and $6,200 for a 20 × 20 ft driveway, 4 in thick, and $4,000 is the price most Brooklyn homeowners pay. The concrete itself is the smaller part: about 5.5 cubic yards at $130–$205 each, or $715–$1,150. The rest is a crew's day or two — grading, gravel base, forms, steel, the pour, the finish and the control joints.

If the old driveway has to come out first, add $800–$2,800 for breaking, hauling and disposal, which takes a remove-and-replace job to $3,350–$9,000. Figures re-checked against 20 sources in November 2026.

Concrete prices in Brooklyn (2026): driveways, slabs and finishes

A 2-car driveway costs $2,550–$6,200, a plain slab $6–$12 a square foot, and stamped concrete $11–$20 a square foot.

Line on the quoteLowTypicalHigh
2-car driveway, 400 sq ft, 4 in, plain$2,550$4,000$6,200
Plain slab, 4 in, per sq ft$6$9$12
Stamped concrete, per sq ft$11$15$20
Patio, 12 × 16 ft, plain$1,200$1,850$2,600
Garage slab, 24 × 24 ft$4,200$6,100$8,850
Steps, 3–4 risers$1,050$1,900$3,300
Remove old concrete, per sq ft$2$4$7
Ready-mix, per cubic yard delivered$130$165$205

Size cuts the rate. A 10 × 12 shed slab is $7–$14 a square foot in Brooklyn; a 24 × 24 garage slab is $7–$15. If you want a patio and a walkway too, pour them the same day as the driveway.

What moves a concrete quote in Brooklyn:

  • What is being poured — plain 4 in flatwork is $6–$12 a square foot; 6 in with rebar $8–$15; stamped $11–$20.
  • What is there now — removing old concrete runs $2–$7 a square foot, $800–$2,800 for a 2-car driveway, before any new work.
  • Truck access — a pump truck for a back yard or a tight lot adds $530–$1,450; small pours pay a short-load fee of $40–$110 a yard.
  • Base and site — a slope, soft soil or a first-time driveway means more excavation and gravel ($1–$3 a square foot for a 4 in base).
  • Season — pours below 40°F need blankets and heat, and pours above 90°F need retarders and early starts; both add time and cost.

Ask every Brooklyn contractor the same six things: slab thickness, the psi of the mix, the base depth, rebar or mesh, whether removal and disposal are included, and who cuts the control joints. Compare those, not the headline price. Get a quote for your concrete job →

Concrete Cost in Brooklyn by Project Size

Quick answer

Shed slab, 10 × 12 ft: $900–$1,750. Patio, 12 × 16 ft: $1,200–$2,600. 2-car driveway, 20 × 20 ft: $2,550–$6,200. Garage slab, 24 × 24 ft: $4,200–$8,850. 3-car driveway, 24 × 36 ft: $5,200–$10,350, all plain 4 in concrete.

Worked example: a Brooklyn 2-car driveway, 400 sq ft, is about $4,000. Add a 4 × 50 ft walkway to the front door at $1,900 and a 12 × 16 patio at $1,850, poured the same day, and the job is roughly $7,750 for about 792 sq ft, which is why one combined quote costs less than three separate ones: the truck, the crew and the setup come once.

The rate falls as the pour grows. A 10 × 12 shed slab is $7–$14 a square foot, a 2-car driveway $6.38–$15.50, and a 3-car driveway ($5,200–$10,350 for 864 sq ft) $6–$11. Thickness moves it the other way: going from 4 in to 6 in with rebar takes a square foot from $6–$12 to $8–$15.

Brooklyn Concrete Costs by Finish and Type

Finish or typeCostBest for
Plain concrete, broom finish$6–$12 per sq ftDriveways, garage floors, shed pads and plain patios. The cheapest finish and the easiest to repair.
Colored concrete (integral color)$8–$13 per sq ftPigment mixed into the whole load, so chips and wear show the same color. Earth tones cost least; blues and greens most.
Exposed aggregate$8–$14 per sq ftSlip-resistant pool decks, walkways and driveways. The top of the slab is washed off to show the stone.
Stamped concrete$11–$20 per sq ftPatios, pool decks and front walks that should look like stone, slate or brick. Needs resealing every 2–3 years.
Stained concrete (existing slab)$3–$10 per sq ftGiving a sound existing patio or floor color without a new pour. Acid stain is mottled; water-based stain is more even.
Polished concrete (existing slab)$3–$10 per sq ftGarage, basement and interior floors ground to a shine. Not for driveways — polished surfaces are slippery when wet.
New slab, poured and polished$9–$22 per sq ftA finished interior floor in one project: the slab plus the grinding and polishing passes.
Resurfacing overlay$3–$8 per sq ftA sound slab with surface flaws. A thin cement overlay hides spalling and stains for a fraction of a tear-out.
Heavy-duty 6 in slab with rebar$8–$15 per sq ftRV pads, truck parking, workshops and anywhere a trailer or lift will sit. Half again as strong as a 4 in slab.
Cost by finish or type in BrooklynTypical range, per sq ft.
Plain concrete, broom finish $6–$12per sq ft
Colored concrete (integral color) $8–$13per sq ft
Exposed aggregate $8–$14per sq ft
Stamped concrete $11–$20per sq ft
Stained concrete (existing slab) $3–$10per sq ft
Polished concrete (existing slab) $3–$10per sq ft
New slab, poured and polished $9–$22per sq ft
Resurfacing overlay $3–$8per sq ft
Heavy-duty 6 in slab with rebar $8–$15per sq ft
Brooklyn tip: if the old driveway is coming out, get removal and disposal ($800–$2,800 for 400 sq ft) as its own line. It is where the cheap quote hides its gap.

Concrete price vs. what you pay — the Brooklyn driveway bill

Ready-mix concrete costs $130–$205 a cubic yard delivered in Brooklyn, and a cubic yard covers about 81 sq ft at 4 in, so a 400 sq ft driveway takes about 5.5 yards with waste and a thickened edge: $715–$1,150 of concrete inside a $2,550–$6,200 job. The difference pays for grading, a compacted gravel base, forms, steel, a crew of three or four for the pour, the finish, saw-cut joints and curing.

Labor is 40% to 55% of a flatwork bill, which is why prices differ by city while the concrete price barely moves. Where finishers earn more, a driveway costs more; the mix in the truck costs about the same in Brooklyn as it does two states away, give or take the plant's delivery radius.

What's included in a Brooklyn concrete quote (and what costs extra)

A standard driveway price covers grading, a compacted gravel base, forms, wire mesh or rebar, 4 in of concrete, a broom finish, control joints and curing. The headline price often leaves out:

  • Removing the old concrete — $2–$7 a square foot; $800–$2,800 for a 2-car driveway
  • Pump truck — $530–$1,450 when the mixer cannot reach the forms
  • Decorative finish — stamped $11–$20 and exposed aggregate $8–$14 a square foot, against $6–$12 plain
  • Sealing — $375–$940 for a 400 sq ft driveway, repeated every 2–3 years on decorative work

Ask for the thickness, psi, base depth and reinforcement in writing, and for proof of liability insurance.

What Affects Concrete Costs in Brooklyn

Size, thickness and reinforcement

Plain 4 in concrete is $6–$12 a square foot in Brooklyn; 6 in with rebar for trucks and RVs is $8–$15. Adding a rebar grid to a 4 in slab costs $105–$310 per 100 sq ft. Small pours cost more per square foot than big ones.

Finish

Broom finish is the base price. Integral color is $8–$13 a square foot, exposed aggregate $8–$14, stamped $11–$20. Stamped work also needs resealing every 2–3 years.

What has to come out first

Removing old concrete is $2–$7 a square foot, or $800–$2,800 for a 2-car driveway, including hauling and landfill fees. Reinforced or 6 in slabs cost more to break up.

Access and pumping

If the mixer truck cannot reach the forms, a line or boom pump adds $530–$1,450 to the job. Jobs under about 4 cubic yards pay a short-load fee of $40–$110 a yard at the plant.

Local rules

New York City requires a Home Improvement Contractor license from the Department of Consumer and Worker Protection for driveways, patios and other home improvement work, and any sidewalk, curb cut or apron work needs a Department of Transportation permit. Property owners, not the city, are responsible for the sidewalk in front of their building.

Labor rates in Brooklyn

Cement masons and concrete finishers in the New York-Newark-Jersey City metro earn a median $65,030 a year in federal wage data, about 14% above the US median. Labor is 40–55% of the bill, so Brooklyn prices land about 5% above the US typical of $3,800 for a 2-car driveway.

Season and weather

Concrete should not be poured on frozen ground or when the temperature will drop below 40°F in the next day without blankets and heaters, and hot days over 90°F need an early start and a retarder in the mix. In Brooklyn, the busy season books up weeks ahead, so get quotes early.

How to Save Money on Concrete in Brooklyn
  1. Pour everything in one visit.A driveway, walkway and patio poured the same day share one setup, one truck and no short-load fee. Separately, a 10 × 12 slab alone costs $900–$1,750 in Brooklyn — $7–$14 a square foot.
  2. Keep the truck close.A pour the mixer can reach from the street avoids a $530–$1,450 pump charge. Move cars, open gates and clear the path before the crew arrives.
  3. Choose the finish by where it shows.Stamp or color the front walk and the patio ($11–$20 a square foot) and leave the driveway and side yard in plain broom finish ($6–$12).
  4. Do the demolition and hauling yourself only if you can.Removal is $2–$7 a square foot, but 400 sq ft of 4 in concrete weighs about 10 tons and landfills charge $90–$160 a ton. A rented jackhammer and a dumpster often cost close to the contractor's price.
  5. Book the shoulder season.Late spring and early fall are the rush in Brooklyn. Contractors with gaps in late fall or late winter — where the climate allows a pour above 40°F — often sharpen their price.
  6. Get the spec in writing.Two quotes can differ by $1,450 on the same driveway because one is 3.5 in thick with no base and no steel. Make both say 4 in, the psi, the base depth and the reinforcement.
Concrete Cost in Brooklyn: What the Quote Should Include

Brooklyn contractors quote by the square foot or by the job. Before you pay a deposit, get these in writing:

  • The area in square feet with dimensions, and the slab thickness (4 in for cars, 5–6 in for trucks and RVs)
  • The concrete mix: psi (3,000 minimum outdoors; 3,500–4,000 with air entrainment where it freezes) and the number of cubic yards
  • Base: excavation depth, inches of compacted gravel, and a vapor barrier under any garage or interior slab
  • Reinforcement: wire mesh or rebar, bar size and spacing
  • Removal and disposal of existing concrete as its own line, with landfill fees
  • Finish (broom, stamped, exposed aggregate), color, sealer, and control joints — spacing and whether they are tooled or saw-cut
  • Truck access, pump charge or short-load fee, and any permit, sidewalk or curb-cut fees (and who pulls the permit)
  • Start date, pour date, cure time before you can park on it, payment stages, warranty and proof of insurance
Frequently asked questions — Concrete cost in Brooklyn
How much does a concrete driveway cost in Brooklyn?

$2,550–$6,200 for a 2-car, 20 × 20 ft driveway, 4 in thick with a plain finish, and $4,000 is typical. Removing the old driveway first adds $800–$2,800; a stamped finish takes it to $4,400–$8,000.

How much does concrete cost per square foot in Brooklyn?

$6–$12 a square foot for a plain 4 in slab, installed. Six inches with rebar is $8–$15, exposed aggregate $8–$14, and stamped concrete $11–$20. Small pours cost more per square foot than large ones.

How much is a cubic yard of concrete in Brooklyn?

$130–$205 a cubic yard for 3,000–4,000 psi ready-mix, delivered. Orders under a full truck pay a short-load fee of about $40–$110 a yard short, and a cubic yard covers about 81 sq ft at 4 in thick.

How much does a concrete patio cost in Brooklyn?

$1,200–$2,600 for a plain 12 × 16 ft patio. Stamped, the same patio is $2,100–$3,850; in exposed aggregate $1,550–$2,700.

How much does a concrete slab cost in Brooklyn?

$6–$12 a square foot for plain 4 in flatwork. A 10 × 12 shed slab is $900–$1,750, a 24 × 24 garage slab $4,200–$8,850, and a monolithic slab foundation $6–$14 a square foot.

How much does it cost to remove concrete in Brooklyn?

$2–$7 a square foot including hauling and landfill fees, so $800–$2,800 for a 400 sq ft driveway and $385–$1,350 for a 12 × 16 patio. Reinforced or thick slabs cost more.

Do I need a permit or a licensed contractor for concrete work in New York?

New York City requires a Home Improvement Contractor license from the Department of Consumer and Worker Protection for driveways, patios and other home improvement work, and any sidewalk, curb cut or apron work needs a Department of Transportation permit. Property owners, not the city, are responsible for the sidewalk in front of their building.

How thick should a concrete driveway be?

Four inches of 3,000–4,000 psi concrete over 4 in of compacted gravel is the standard for cars. Go to 5–6 in with rebar ($8–$15 a square foot) for trucks, RVs or a trailer. Thicker edges where the driveway meets the street help too.

How long before I can drive on new concrete?

Walk on it after 24–48 hours, park a car after 7–10 days, and keep heavy trucks and RVs off for 30 days. Concrete reaches its design strength at about 28 days; seal it after that.

What's included in a Brooklyn concrete quote?

Grading, gravel base, forms, mesh or rebar, the concrete, a broom finish, control joints and curing. Often extra: removal of old concrete ($800–$2,800 for a driveway), a pump truck ($530–$1,450), decorative finishes and sealing ($375–$940).

Prices verified November 2026 · Cross-referenced against 20+ American pricing sources · See methodology

Prices for the Brooklyn metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, dated city price pages, ready-mix and material prices and federal wage data. No contractor can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read our full methodology →

Get a fair concrete quote in Brooklyn

Local concrete contractors · Free quotes · No obligation, no spam.

Get quotes in Brooklyn →Max 2 concrete contractors will contact you
Get quotes in BrooklynMax 2 concrete contractors · free · no spam→