Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does flooring cost in Brooklyn?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched13 min read
Flooring cost

Flooring costs in Brooklyn

Brooklyn, NYChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Brooklyn, NY
$2,200–$6,550per 500 sq ft

Most 500 sq ft LVP floors in Brooklyn cost $2,200–$6,550 installed, materials and labor, with $3,800 the typical bill. That is $4–$13 a square foot; carpet runs $3–$11 and solid hardwood $9–$25.

How we get this data
Typical
$3,800
Low end
$1,350
High end
$9,250
500 sq ft LVP
$2,200–$6,550
LVP per sq ft
$4–$13
Carpet per sq ft
$3–$11
Solid hardwood per sq ft
$9–$25

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local flooring installers send you a real quote. Free, no obligation.

Get my fair quote →
Typical flooring price: Brooklyn vs nearby citiesTypical price, per 500 sq ft. The line marks the US typical.
New York, NY $3,850
Brooklyn, NYThis guide $3,800
Newark, NJ $3,750
Trenton, NJ $3,600
Stamford, CT $3,500

The typical Brooklyn price is $3,800, 9% above the US typical of $3,500.

Where Brooklyn sits among 195 US metrosNumber of metros at each typical flooring price, per 500 sq ft.

Brooklyn's price band

Brooklyn is pricier than 91% of the 195 US metros we price for flooring work.

A 500 sq ft luxury vinyl plank floor in Brooklyn costs $2,200–$6,550 installed, and $3,800 is what most homeowners pay. Per square foot, LVP is $4–$13, carpet $3–$11, laminate $4–$12 and solid hardwood $9–$25. Pulling out the old floor adds $1–$5 a foot.

Brooklyn flooring work falls under New York City's Home Improvement Contractor license, issued by the city's consumer protection department. Many co-op and condo buildings enforce an 80% carpet-or-rug rule in their house rules, and walk-ups add carrying time to every quote.

Prices on this page include materials, labor, underlayment where the product needs it and basic trim unless the row says otherwise. Removing the old floor ($1–$5 a square foot), subfloor repair and furniture moving are priced as their own lines, because Brooklyn installers quote them that way.

Comparing cities, or after the US-wide picture? See the national guide: Flooring cost in the USA.

Quick answer

$2,200–$6,550 to install 500 sq ft of luxury vinyl plank in Brooklyn, materials and labor — typically $3,800. Per square foot installed: LVP $4–$13, carpet $3–$11, laminate $4–$12, solid hardwood $9–$25. Verified November 2026. Get free Brooklyn quotes →

  • 500 sq ft of LVP installed: $2,200–$6,550 ($3,800 typical)
  • Per sq ft: LVP $4–$13; laminate $4–$12; carpet $3–$11
  • Hardwood: engineered $8–$20, solid $9–$25 per sq ft; refinishing $3–$9
  • Removal $1–$5 per sq ft; subfloor repair $3–$11; stairs $65–$270 a step in wood
  • Priciest area to work in: Downtown Brooklyn & Park Slope; lowest quotes: South & East Brooklyn

Prices verified November 2026 · Cross-referenced against 84+ American pricing sources · See methodology

Detailed pricing — Flooring cost in Brooklyn 2026

Installed prices include materials and labor; removal, subfloor work and furniture moving are their own lines. Brooklyn metro, re-verified November 2026.

ServiceLowTypicalHigh
Luxury vinyl plank (LVP), 500 sq ft, materials and laborper 500 sq ft$2,200per 500 sq ft$3,800$6,550
Luxury vinyl plank (LVP), installedper sq ft$4per sq ft$8$13
Rigid-core vinyl plank (SPC or WPC), installedper sq ft$5per sq ft$9$14
Sheet vinyl, installedper sq ft$2per sq ft$4$9
Laminate, installedper sq ft$4per sq ft$7$12
Engineered hardwood, installedper sq ft$8per sq ft$13$20
Solid hardwood, installedper sq ft$9per sq ft$15$25
Bamboo flooring, installedper sq ft$6per sq ft$11$18
Carpet with pad, mid-grade, installedper sq ft$3per sq ft$5$11
Ceramic or porcelain tile floor, installedper sq ft$11per sq ft$19$35
Refinish hardwood floors (sand, stain and finish)per sq ft$3per sq ft$6$9
Refinish 500 sq ft of hardwoodper 500 sq ft$1,700per 500 sq ft$2,850$4,550
Labor only to lay a floating floor you bought (LVP or laminate)per sq ft$2per sq ft$4$6
Old flooring removal and disposalper sq ft$1per sq ft$2$5
Subfloor repair or replacement (plywood or OSB)per sq ft$3per sq ft$7$11
Baseboards, supply and installper linear ft$6per linear ft$8$11
Carpet a stair (tread and riser)per step$30per step$50$70
Hardwood or LVP stair treads and risersper step$65per step$130$270
Carpet one 12×12 bedroom (144 sq ft), with padper room$455per room$765$1,550
Whole home LVP, 1,500 sq ft, installedper home$6,550per home$11,450$19,600
Whole home solid hardwood, 2,000 sq ft, installedper home$17,300per home$30,250$54,000
Recarpet a 3-bedroom home, 1,500 sq ft, with padper home$4,800per home$7,950$15,950
Flooring installer hourly rate (small jobs and repairs)/hr$55/hr$80$130
Furniture moving by the crewper room$30per room$70$145
flooring jobs in Brooklyn: what they costPer sq ft, low to high with the typical price marked. Every line is in the table above.
Ceramic or porcelain tile floor, installed $19$11–$35
Solid hardwood, installed $15$9–$25
Engineered hardwood, installed $13$8–$20
Bamboo flooring, installed $11$6–$18
Rigid-core vinyl plank (SPC or WPC), installed $9$5–$14
Luxury vinyl plank (LVP), installed $8$4–$13
Laminate, installed $7$4–$12
Subfloor repair or replacement (plywood or OSB) $7$3–$11
Refinish hardwood floors (sand, stain and finish) $6$3–$9
Carpet with pad, mid-grade, installed $5$3–$11
Sheet vinyl, installed $4$2–$9
Labor only to lay a floating floor you bought (LVP or laminate) $4$2–$6
Already got a quote?
Check it against these Brooklyn prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local flooring installers in Brooklyn

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What floor do you need a price on?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 84+ American pricing sources · See methodology

Prices cover the Brooklyn metro. Outlying towns can run 5–10% lower; walk-ups and condos in Downtown Brooklyn & Park Slope sit at the top of each range.

How flooring costs vary across Brooklyn

Flooring prices across Brooklyn

Where you live in the metro changes the labor and the prep, not the price of the plank. Older buildings in Downtown Brooklyn & Park Slope take the longest; jobs in South & East Brooklyn tend to come in at or under the city typical.

Flooring prices across BrooklynTypical range by part of the metro, per 500 sq ft. The line marks the Brooklyn typical.
Williamsburg & GreenpointStandard to 6% above $2,250–$6,950per 500 sq ft
Bushwick & Bed-StuyStandard to 6% above $2,250–$6,950per 500 sq ft
Downtown Brooklyn & Park Slope6–12% above the city average $2,350–$7,350per 500 sq ft
South & East Brooklyn2–7% below; some trip fees $2,050–$6,400per 500 sq ft

Williamsburg & Greenpoint

Standard to 6% above
Williamsburg, Greenpoint, North Brooklyn
500 sq ft LVP
$2,250–$6,950 per 500 sq ft
12×12 room
$585–$1,950 / 12×12 room in LVP

Older housing stock where refinishing is as common as replacing. Expect standard per-square-foot rates and a bit more prep.

Bushwick & Bed-Stuy

Standard to 6% above
Bushwick, Bed-Stuy, Crown Heights
500 sq ft LVP
$2,250–$6,950 per 500 sq ft
12×12 room
$585–$1,950 / 12×12 room in LVP

Renovated older homes next to new builds. Standard installed rates; the extras are subfloor leveling and removing layers of old flooring.

Downtown Brooklyn & Park Slope

6–12% above the city average
DUMBO, Gowanus, Park Slope, Prospect Heights
500 sq ft LVP
$2,350–$7,350 per 500 sq ft
12×12 room
$610–$2,050 / 12×12 room in LVP

The priciest part of the metro for a crew to work in: tight parking, stairs to carry material up, and building rules on work hours. Ask whether carrying and disposal are in the price.

South & East Brooklyn

2–7% below; some trip fees
Flatbush, Canarsie, Sunset Park, East New York
500 sq ft LVP
$2,050–$6,400 per 500 sq ft
12×12 room
$535–$1,800 / 12×12 room in LVP

Lower overhead keeps quotes at or a little below the city typical. Book ahead; crews travel from the city on set days.

What you'll actually pay — job by job

Real-World Flooring Costs in Brooklyn

Here's what common flooring jobs cost in Brooklyn in 2026, materials and labor for 500 sq ft of luxury vinyl plank.

Carpet out, LVP in: 500 sq ft open-plan living area — 1–2 days

$2,700–$9,050

The base job ($2,200–$6,550) plus pulling and hauling the old carpet ($500–$2,500). Most Brooklyn jobs land near $3,800 before removal; a rigid-core plank or glue-down install reaches the top.

Carpet one 12×12 bedroom with new pad — half a day

$455–$1,550

Mid-grade carpet, pad, tack strips and labor at $3–$11 a square foot. Old carpet removal is often included; ask. Stairs are extra at $30–$70 a step.

Refinish 500 sq ft of oak floors — 3–5 days with drying

$1,700–$4,550

Sand to bare wood, stain and three coats of finish at $3–$9 a square foot. About four-fifths of the bill is labor. Dustless sanding and dark stains add to it.

Solid hardwood, 500 sq ft, installed — 3–5 days

$4,500–$12,500

Oak plank nailed to a plywood subfloor at $9–$25 a square foot. Prefinished boards cost more to buy and less to lay; site-finished boards are the reverse. Engineered wood is $4,000–$10,000 for the same area.

Water-damaged floor: new subfloor patch plus LVP — 2 days

$875–$2,950

Replacing 100 sq ft of swollen subfloor ($300–$1,100) and laying LVP in the 12×12 room ($575–$1,850). Keep photos and the plumber's invoice: water damage is one of the biggest causes of homeowners insurance claims.

How much does flooring cost in Brooklyn?

Between $2,200 and $6,550 for 500 sq ft of LVP, materials and labor, and $3,800 is the price most Brooklyn homeowners pay. About half of that is the product; the rest is the crew's time, underlayment, transitions and the warranty on the work.

Whole-home jobs get a better rate per foot but a bigger bill: 1,500 sq ft of LVP is $6,550–$19,600, recarpeting a 3-bedroom home $4,800–$15,950, and 2,000 sq ft of solid hardwood $17,300–$54,000. Re-checked against 84 sources in November 2026.

Flooring prices in Brooklyn (2026): per square foot, installed

Luxury vinyl plank costs $4–$13 a square foot installed in Brooklyn, carpet $3–$11, laminate $4–$12, engineered hardwood $8–$20 and solid hardwood $9–$25.

Line on the quoteLowTypicalHigh
Luxury vinyl plank (LVP), per sq ft$4$8$13
Laminate, per sq ft$4$7$12
Carpet with pad, per sq ft$3$5$11
Engineered hardwood, per sq ft$8$13$20
Solid hardwood, per sq ft$9$15$25
Ceramic or porcelain tile, per sq ft$11$19$35
Refinish hardwood, per sq ft$3$6$9
Remove old flooring, per sq ft$1$2$5

The plank is only half the bill. Mid-grade LVP sells for $3–$6 a square foot at the big-box stores; the Brooklyn installed price of $4–$13 adds the crew, underlayment, transitions and a labor warranty.

What moves a flooring quote in Brooklyn:

  • Material — carpet and sheet vinyl at $3–$9 a foot sit at the bottom; solid hardwood and tile at $9–$35 at the top.
  • What is under the old floor — subfloor repair runs $3–$11 a square foot where boards are soft or uneven.
  • Removal — $1–$5 a square foot; glued-down vinyl and tile cost the most to pull.
  • Stairs — $30–$70 a step in carpet, $65–$270 in wood or LVP treads.
  • Job size — small rooms pay a minimum charge; 1,500 sq ft whole-home jobs get a lower rate per foot ($6,550–$19,600 in LVP).

Ask every Brooklyn installer for the same six things: price per square foot with the product named, removal and disposal, subfloor repair rate, stairs and transitions, baseboards or shoe molding, and the labor warranty. Compare those, not the headline price. Get a quote for your flooring job →

Flooring Cost in Brooklyn by Home Size

Quick answer

LVP installed: 1,000 sq ft $4,000–$13,000, 1,500 sq ft $6,000–$19,500, 2,000 sq ft $8,000–$26,000. Carpet for the same areas: $3,000–$11,000, $4,500–$16,500, $6,000–$22,000. Solid hardwood, 2,000 sq ft: $17,300–$54,000.

Worked example: a Brooklyn 3-bedroom home with 1,500 sq ft of worn carpet. LVP through the living areas and hallway (1,000 sq ft, $8,000) plus new carpet in three bedrooms (500 sq ft, $2,500) comes to about $10,500 at typical prices, plus about $1,750 to pull and haul the old carpet.

Going all hardwood instead: 1,500 sq ft of solid oak at $22,500, or engineered wood at $19,500, with the staircase in matching wood treads adding $845–$3,500. That only makes sense if the house has a plywood subfloor and you plan to stay or sell to buyers who pay for wood.

Brooklyn Flooring Costs by Material

MaterialCostBest for
Luxury vinyl plank (LVP)$4–$13 per sq ftKitchens, basements and busy family rooms. Waterproof, click-lock, about 25 years of life. The most installed floor in the US.
Rigid-core vinyl plank (SPC or WPC)$5–$14 per sq ftUneven slabs and sunny rooms. Stone (SPC) or wood (WPC) core hides small subfloor dips and dents less than flexible vinyl.
Sheet vinyl$2–$9 per sq ftBathrooms, laundry rooms and rentals. Seamless and cheap; harder to repair one spot.
Laminate$4–$12 per sq ftBedrooms, living rooms and hallways on a budget. Hard wear layer, 15–25 years; most types swell if water sits.
Engineered hardwood$8–$20 per sq ftReal wood over concrete slabs and in humid climates. Can be refinished once or twice; 50+ years.
Solid hardwood$9–$25 per sq ftAbove-grade rooms on a plywood subfloor. Refinish every 7–10 years and it lasts 100+ years. Best resale value.
Bamboo$6–$18 per sq ftA hard, fast-growing wood look. Strand-woven bamboo is very hard; cheap bamboo dents and fades.
Carpet$3–$11 per sq ftBedrooms, stairs and upstairs rooms. Warm and quiet; plan on replacing it every 8–10 years.
Ceramic or porcelain tile$11–$35 per sq ftBathrooms, entries and hot climates. Lasts 75+ years; cold and hard underfoot, and the costliest labor.
Polished concrete (existing slab)$3–$17 per sq ftBasements, garages and modern slab homes. Grinds and seals the slab you already have.
Cost by material in BrooklynTypical range, per sq ft.
Luxury vinyl plank (LVP) $4–$13per sq ft
Rigid-core vinyl plank (SPC or WPC) $5–$14per sq ft
Sheet vinyl $2–$9per sq ft
Laminate $4–$12per sq ft
Engineered hardwood $8–$20per sq ft
Solid hardwood $9–$25per sq ft
Bamboo $6–$18per sq ft
Carpet $3–$11per sq ft
Ceramic or porcelain tile $11–$35per sq ft
Polished concrete (existing slab) $3–$17per sq ft
Brooklyn tip: ask for the wear layer in mils, not just the brand. A 20 mil LVP costs little more than a 12 mil one inside the $4–$13 range and lasts far longer in a busy kitchen.

Box price vs. installed price — the Brooklyn flooring bill

Mid-grade LVP costs $3–$6 a square foot in the box and premium rigid-core plank $6–$10, but laid in Brooklyn the floor is $4–$13. The difference pays for a crew at $55–$130 an hour, underlayment ($0.50–$3.50 a foot where needed), transitions ($5–$30 each), 10% waste and a warranty on the work.

Click-lock LVP and laminate are fair DIY jobs on a flat, dry subfloor: the labor-only line ($2–$6 a square foot) is what you save, about $1,000–$3,000 on 500 sq ft. Leave hardwood, tile, stairs and anything over a damp slab to a pro, and never sand or scrape old vinyl tile from before the 1980s: it can hold asbestos.

What's included in a Brooklyn flooring quote (and what costs extra)

A standard installed price covers the flooring, underlayment where the product needs it, labor, transitions at doorways and a labor warranty. The headline price often leaves out:

  • Old floor removal and disposal — $1–$5 a square foot
  • Subfloor repair or leveling — $3–$11 a square foot where boards are soft or the slab is uneven
  • Stairs — $30–$70 a step in carpet, $65–$270 in wood or LVP
  • Baseboards, shoe molding and furniture — $6–$11 a linear foot for trim; $30–$145 a room to move furniture

Ask how long the labor warranty lasts and whether the product warranty needs a certified installer; good companies put both in writing.

What Affects Flooring Costs in Brooklyn

Material

Installed per square foot in Brooklyn: sheet vinyl $2–$9, carpet $3–$11, laminate $4–$12, LVP $4–$13, engineered hardwood $8–$20, solid hardwood $9–$25, tile $11–$35.

Room size and layout

A 12×12 bedroom in LVP is $575–$1,850; the same floor across a 1,500 sq ft home is $6,550–$19,600, a lower rate per foot. Angled walls, closets and many doorways add cuts and transitions.

Subfloor condition

Flat and dry is free; soft, uneven or damp costs money. Subfloor repair is $3–$11 a square foot, and a slab that fails a moisture test needs a vapor barrier before any wood or laminate goes down.

Old flooring removal

$1–$5 a square foot in Brooklyn. Carpet is quick; glued vinyl and tile take longest. Floating LVP can sometimes go over an old hard floor and skip this line.

Local rules

In New York City, anyone paid to do home improvement work, flooring included, needs a Home Improvement Contractor license from the city's consumer protection department. Many co-op and condo buildings also enforce an 80% rule: four-fifths of the floor must be covered by carpet or rugs, so check the house rules before switching to hard floors.

Labor rates in Brooklyn

Labor is 40–60% of an installed floor. Brooklyn is a high-cost metro for installer labor, so the 500 sq ft LVP job is about 9% above the US typical of $3,500; refinishing, which is four-fifths labor, moves the most with local wages.

Stairs and extras

Carpeting a flight of 13 stairs is $390–$910; wood or LVP treads $845–$3,500. Baseboards add $6–$11 a linear foot and furniture moving $30–$145 a room.

How to Save Money on Flooring in Brooklyn
  1. Check what is under the carpet.Older homes often hide solid hardwood under carpet; look before you buy. Refinishing it costs $3–$9 a square foot against $9–$25 for new wood.
  2. Buy the flooring yourself, pay for labor only.Labor to lay a floating floor you bought is $2–$6 a square foot. Big-box stores sell mid-grade LVP for $3–$6 a foot, and often run free or flat-rate basic carpet installs.
  3. Do the removal and furniture.Pulling old carpet yourself saves $1–$5 a square foot, and clearing rooms saves $30–$145 a room. Leave old vinyl tile alone unless it has been tested for asbestos.
  4. Do the whole floor at once.One 1,500 sq ft job ($6,550–$19,600 in LVP) costs less per foot than three rooms on three visits, each with its own minimum charge and transitions.
  5. Get an itemized quote.Product name and wear layer, square feet with waste, removal, subfloor repair rate, stairs, trim and warranty should each be a line. Be wary of a low per-foot price that leaves half of them out.
  6. Pick the material for the room, not the catalog.Carpet at $3–$11 a foot is fine in bedrooms; LVP at $4–$13 in kitchens and basements; save hardwood at $9–$25 for the rooms buyers see.
Flooring Cost in Brooklyn: What the Quote Should Include

Brooklyn flooring installers often quote a single number per square foot. Before you pay a deposit, get these in writing:

  • The product: brand, line, thickness and wear layer (mils) or carpet face weight
  • Square feet measured, with the waste allowance (usually 10%) shown
  • Removal and disposal of the old floor, priced or marked included
  • Subfloor repair or leveling rate per square foot, and who decides
  • Underlayment or vapor barrier and whether it is in the price
  • Stairs, transitions, baseboards and shoe molding as their own lines
  • Furniture moving and appliance disconnects
  • Warranty on labor and on the product, and the install start and finish dates
Frequently asked questions — Flooring cost in Brooklyn
How much does flooring cost in Brooklyn?

$2,200–$6,550 to install 500 sq ft of luxury vinyl plank, materials and labor, and $3,800 is typical. Per square foot: LVP $4–$13, carpet $3–$11, solid hardwood $9–$25.

How much is LVP flooring per square foot in Brooklyn?

$4–$13 installed, about $8 typical. Rigid-core SPC or WPC plank runs $5–$14; the plank alone is $2–$10 a foot at retail.

How much does it cost to install hardwood floors in Brooklyn?

$9–$25 a square foot for solid hardwood and $8–$20 for engineered, installed. A 500 sq ft room is $4,500–$12,500 in solid wood; a 2,000 sq ft home $17,300–$54,000.

How much does carpet installation cost in Brooklyn?

$3–$11 a square foot with pad, installed. A 12×12 bedroom is $455–$1,550, a flight of 13 stairs $390–$910, and a 3-bedroom home $4,800–$15,950.

How much does it cost to refinish hardwood floors in Brooklyn?

$3–$9 a square foot to sand, stain and finish, or $1,700–$4,550 for 500 sq ft. About four-fifths of that is labor, so it moves with Brooklyn wages more than any other line.

What does it cost to remove old flooring in Brooklyn?

$1–$5 a square foot, or $500–$2,500 for 500 sq ft. Carpet is the cheapest to pull; glued-down vinyl and tile the dearest. Many carpet installers include removal.

Do I need a permit to replace flooring?

Usually not. Most cities follow the model residential code, which exempts carpeting, tiling and similar finish work from permits. Replacing structural subfloor or joists can need one, so ask the installer who is pulling it.

Is LVP or laminate cheaper?

They overlap. Laminate is $4–$12 a square foot installed in Brooklyn and LVP $4–$13. Laminate is often cheaper to buy; LVP is waterproof, so it wins in kitchens, baths and basements.

How long does flooring installation take?

A 12×12 room in LVP, laminate or carpet is half a day to a day. A 500 sq ft open area is 1–2 days, a 1,500 sq ft home 3–5 days, and hardwood or refinishing adds drying time. Wood and plank should sit in the house a few days first.

What's included in a Brooklyn flooring quote?

The product, labor, underlayment where needed and transitions. Often extra: removal ($1–$5 a square foot), subfloor repair ($3–$11), stairs ($65–$270 a step in wood) and furniture moving ($30–$145 a room).

Prices verified November 2026 · Cross-referenced against 84+ American pricing sources · See methodology

Prices for the Brooklyn metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, retailer and installer price pages, flooring-industry data and federal wage data. No flooring company can pay to change them, so always get a couple of quotes. Last reviewed November 2026. Read our full methodology →

Get a fair flooring quote in Brooklyn

Local flooring installers · Free quotes · No obligation, no spam.

Get quotes in Brooklyn →Max 2 flooring installers will contact you
Get quotes in BrooklynMax 2 flooring installers · free · no spam→