$8–$25 per square foot to install solid hardwood in 2026, materials and labor, and $14 is typical. Engineered hardwood runs $7–$20. A 500 sq ft room is $4,000–$12,500 in solid wood; a 2,000 sq ft home $16,000–$50,000. Refinishing existing hardwood costs $3–$8 a foot.
Solid hardwood installed: $8–$25 per sq ft, $14 typical
Engineered hardwood: $7–$20 per sq ft; floats or glues over a slab
500 sq ft: $4,000–$12,500 solid, $3,500–$10,000 engineered; 2,000 sq ft home $16,000–$50,000
Refinishing $3–$8 per sq ft recoups about 147% at resale (NAR 2022); new wood about 118%
Keep the house at 30–50% humidity and 60–80°F or boards cup and gap
Prices verified November 2026 · Cross-referenced against 84+ American pricing sources · See methodology
01 / PricesUSA · November 2026
Hardwood flooring prices, line by line (2026)
Solid hardwood costs $8–$25 a square foot installed. The lines below show what moves the bill.
Hardwood flooring prices, line by line (2026)Per sq ft, low to high with the typical price marked.
Solid hardwood, installed$14$8–$25
Engineered hardwood, installed$12$7–$20
Bamboo flooring, installed$10$6–$17
Hickory, material only$10$6–$14
White oak, material only$9$6–$12
Red oak, material only$7$5–$10
Refinish hardwood floors (sand, stain and finish)$5$3–$8
Old flooring removal and disposal$2$1–$4
$0$10$20$30
Job
Low
Typical
High
Solid hardwood, installedper sq ft
$8
$14
$25
Engineered hardwood, installedper sq ft
$7
$12
$20
Bamboo flooring, installedper sq ft
$6
$10
$17
Solid hardwood, 500 sq ft roomper 500 sq ft
$4,000
$7,000
$12,500
Engineered hardwood, 500 sq ft roomper 500 sq ft
$3,500
$6,000
$10,000
Whole home solid hardwood, 2,000 sq ft, installedper home
$16,000
$28,000
$50,000
Refinish hardwood floors (sand, stain and finish)per sq ft
$3
$5
$8
Refinish 500 sq ft of hardwoodper 500 sq ft
$1,500
$2,500
$4,000
Hardwood or LVP stair treads and risersper step
$60
$120
$250
Hardwood treads and risers, flight of 13per flight
$780
$1,550
$3,250
Red oak, material onlyper sq ft
$5
$7
$10
White oak, material onlyper sq ft
$6
$9
$12
Hickory, material onlyper sq ft
$6
$10
$14
Old flooring removal and disposalper sq ft
$1
$2
$4
US prices, November 2026. Low is a simple job in a low-cost area; high is a bigger job or a high-cost city.
02 / By city195 cities priced
Does hardwood flooring cost change by city?
Yes. The same job costs more where labor and rent cost more. Here's how flooring prices in the biggest US metros compare with the US typical of $3500.
Flooring prices in the 12 biggest US metrosEach city's typical flooring price against the US typical of $3,500.
Solid hardwood is one piece of wood, usually 3/4 inch thick, nailed to a plywood subfloor above grade. It costs $8–$25 a square foot installed and can be sanded and refinished many times over a 100-year life. Engineered hardwood is a real wood veneer on a plywood core, $7–$20 a square foot installed; it floats or glues down over concrete slabs and in basements where solid wood would cup, and can be refinished once or twice depending on veneer thickness.
Material is roughly half the bill. Red oak sells for $5–$10 a square foot, white oak $6–$12, maple $4–$12, hickory $6–$14 and walnut $8–$11. Labor to nail or glue the floor runs about $3–$6 a foot in the national guides, more for herringbone and wide planks.
02
Compare
Prefinished vs site-finished
Prefinished boards cost more to buy and less to install: the crew nails them down and leaves the same day. Unfinished boards cost less in the box but are sanded, stained and coated on site, which adds two to four days of work and drying. The national guides find the two end up close in total price; site finishing gives a seamless surface and any stain color, prefinished gives a harder factory coating.
03
Humidity, slabs and acclimation
Wood moves with moisture. The wood flooring trade association recommends keeping the home at 60–80°F and 30–50% relative humidity, and letting the flooring sit in that room before installation so its moisture content is within a few points of the subfloor. Skip it and boards gap in winter and cup in summer.
Over a concrete slab, the installer should moisture-test the slab and use the adhesive maker's limits. Solid wood on a slab needs a plywood layer first; engineered or LVP ($4–$12) avoids that cost. Subfloor repair where the plywood is soft runs $3–$10 a square foot.
04
Compare
Refinish or replace?
If the existing floor is solid wood with enough thickness left, refinishing at $3–$8 a square foot ($1,500–$4,000 for 500 sq ft) costs far less than replacement at $8–$25. The National Association of Realtors' 2022 Remodeling Impact Report put refinishing at $3,400 with $5,000 added at resale, 147% of cost; new wood floors at $5,500 returned 118%.
Replace when boards are rotted, badly cupped, or an engineered veneer is too thin to sand again. Pulling old nailed hardwood costs about $150–$350 per 100 sq ft.
05
What happened to hardwood prices in 2025–2026
Tariffs on imported hardwood and engineered flooring ran from 10% to well over 25% in 2025–2026, and Southeast Asian suppliers saw 18–20% added on top of an 8% duty. One large US maker raised solid hardwood prices 5–7% and engineered 3–5% from September 12, 2025, citing lumber costs and tariffs. Domestic red and white oak carry no import tariff, though white oak supply is tight; ask where the boards were milled.
04 / Check a quoteFree · no sign-up
Got a price? See if it's fair
Solid hardwood, installed
Type the price you were quoted. We compare it with the US range of $8–$25 per sq ft.
Get free quotes from up to 2 local flooring installers
Free · No obligation · About a minute
1The job
2Budget
3Your details
C
Casey · LocalGoingRate
What floor do you need a price on?
Tap one to start.
C
Casey · LocalGoingRate
What's your rough budget?
A ballpark is fine. It helps the flooring installers who reply.
C
Casey · LocalGoingRate
Where should they text you?
Max 2 flooring installers. No call floods.
100% free. No obligation.
🔒 Only your matched flooring installers see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 flooring installers about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
C
Casey · LocalGoingRate
Check your phone
05 / Questions5 answers
Hardwood flooring cost: FAQ
How much does it cost to install hardwood floors per square foot?
$8–$25 for solid hardwood and $7–$20 for engineered, installed. Labor is about $3–$6 of that; the rest is the wood.
How much is hardwood flooring for 1,000 sq ft?
$8,000–$25,000 in solid wood and $7,000–$20,000 in engineered, installed. For 2,000 sq ft, $16,000–$50,000 and $14,000–$40,000.
Is engineered hardwood cheaper than solid?
Usually a little: $7–$20 against $8–$25 a square foot installed. It is also the right choice over a concrete slab or in a basement.
Do hardwood floors add value?
Real estate agents surveyed by NAR in 2022 estimated new wood floors recoup about 118% of their cost and refinishing about 147%; the 2025 edition did not rank flooring.
How much do hardwood stairs cost?
$60–$250 per step for treads and risers, or $780–$3,250 for a flight of 13. Carpeting the same flight is $325–$845.
These are independent estimates built from public cost guides, retailer and installer price pages, flooring-industry data and federal wage data. No flooring company can pay to change them, so always get a couple of quotes. Last reviewed November 2026. Read the full methodology →