How much does concrete cost in Albuquerque?
By Our research team · Last verified · Methodology
Most concrete contractors in Albuquerque charge $2,350–$5,850 to pour a 2-car driveway for 20 × 20 ft of 4 in concrete, and $3,700 is what most homeowners here pay. Stamped work is $10–$18 a square foot; tearing out the old driveway first adds $800–$2,800.
How we get this data- Typical
- $3,700
- Low end
- $1,500
- High end
- $8,550
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local concrete contractors send you a real quote. Free, no obligation.
Get my fair quote →The typical Albuquerque price is $3,700, in line with the US typical of $3,800.
Albuquerque's price band
Albuquerque is cheaper than 51% of the 195 US metros we price for concrete work.
Expect $2,350–$5,850 for a plain 400 sq ft concrete driveway in Albuquerque, with $3,700 the going rate. Smaller pours cost more per square foot: a 10 × 12 shed slab is $835–$1,650 and a set of steps $980–$3,100, while a 24 × 24 garage slab is $3,950–$8,400. Crews bill about $45–$95 an hour per worker when they work by the hour.
As a mid-size market, Albuquerque prices a driveway in line with the US typical. Local pay drives it: concrete finishers in the Albuquerque metro earn a median $49,210 a year (about 14% below the US median), while the 5.5 or so cubic yards of ready-mix in a 2-car driveway cost $690–$1,050 almost everywhere.
New Mexico requires a Construction Industries Division license for contracting; only very small operators earning no more than $7,200 a year are exempt. This is general information, not legal advice.
Comparing cities, or after the US-wide picture? See the national guide: Concrete cost in the USA.
$2,350–$5,850 to pour a 2-car concrete driveway in Albuquerque — 400 sq ft, 4 in thick, plain finish — typically $3,700. A plain slab runs $6–$12 a square foot, stamped concrete $10–$18, and a 12 × 16 patio $1,150–$2,450. Verified November 2026. Get free Albuquerque quotes →
- 2-car driveway, 400 sq ft, 4 in: $2,350–$5,850 ($3,700 typical)
- Plain slab $6–$12/sq ft; 6 in with rebar $8–$15; stamped $10–$18
- Patio 12 × 16 $1,150–$2,450; garage slab 24 × 24 $3,950–$8,400; steps $980–$3,100
- Remove old concrete $2–$7/sq ft; ready-mix $125–$195 per cubic yard
- Pump truck $490–$1,350; sealing $340–$865; crew labor $45–$95/hr
Prices verified November 2026 · Cross-referenced against 20+ American pricing sources · See methodology
Installed prices with labor, 3,000–4,000 psi concrete, gravel base and forms unless the row says otherwise. Albuquerque metro, re-verified November 2026. Removal, pumping, decorative finishes and sealing are their own rows.
| Service | Low | Typical | High |
|---|---|---|---|
| Concrete driveway, 2-car, 20 × 20 ft (400 sq ft), 4 in, plain finish, installedper 400 sq ft | $2,350per 400 sq ft | $3,700 | $5,850 |
| Plain concrete slab, 4 in, broom finish, installedper sq ft | $6per sq ft | $9 | $12 |
| Concrete slab, 6 in with rebar (trucks, RVs, shops), installedper sq ft | $8per sq ft | $11 | $15 |
| Rebar or wire-mesh reinforcement, added to a slab, per 100 sq ftper 100 sq ft | $100per 100 sq ft | $170 | $290 |
| Colored concrete (integral color), installedper sq ft | $8per sq ft | $10 | $13 |
| Exposed aggregate finish, installedper sq ft | $8per sq ft | $11 | $14 |
| Stamped concrete, installedper sq ft | $10per sq ft | $14 | $18 |
| Stain an existing slab (acid or water-based), sealedper sq ft | $3per sq ft | $6 | $10 |
| Polish an existing concrete slabper sq ft | $3per sq ft | $6 | $10 |
| New slab poured and polishedper sq ft | $9per sq ft | $15 | $22 |
| Resurface or overlay existing concrete (spray-on or microtopping)per sq ft | $3per sq ft | $5 | $8 |
| Stamped or exposed-aggregate driveway, 2-car, 400 sq ftper 400 sq ft | $4,000per 400 sq ft | $5,600 | $7,200 |
| Concrete walkway, 4 × 50 ft (200 sq ft), 4 in, plainper walkway | $1,200per walkway | $1,750 | $2,500 |
| Concrete patio, 12 × 16 ft (192 sq ft), plain broom finishper patio | $1,150per patio | $1,700 | $2,450 |
| Shed or small slab, 10 × 12 ft (120 sq ft), 4 inper slab | $835per slab | $1,150 | $1,650 |
| Garage slab, 24 × 24 ft (576 sq ft), 4–6 in with rebarper slab | $3,950per slab | $5,650 | $8,400 |
| Poured concrete steps, 3–4 risers, 4 ft wideper set | $980per set | $1,750 | $3,100 |
| Concrete footings, 12 × 24 in with rebar, per linear ftper linear ft | $20per linear ft | $30 | $45 |
| Slab-on-grade foundation (monolithic, thickened edge), per sq ftper sq ft | $6per sq ft | $10 | $14 |
| Remove and haul away old concrete, 4 in unreinforcedper sq ft | $2per sq ft | $4 | $7 |
| Seal a 400 sq ft driveway or patio (pro, one coat)per job | $340per job | $580 | $865 |
| Ready-mix concrete, 3,000–4,000 psi, deliveredper cubic yard | $125per cubic yard | $155 | $195 |
| Concrete pump truck (line or boom), per jobper job | $490per job | $825 | $1,350 |
| Concrete crew labor, per worker per hourper hour | $45per hour | $65 | $95 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local concrete contractors in Albuquerque
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you need poured?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the concrete contractors who reply.
Where should they text you?
- Max 2 concrete contractors. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched concrete contractors see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 concrete contractors about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Prices verified November 2026 · Cross-referenced against 20+ American pricing sources · See methodology
Prices cover the Albuquerque metro. Outlying towns can pay delivery charges from the batch plant; tight lots in Downtown, Nob Hill & Wells Park and South Valley & International District sit at the top of each range for pumping and demolition.
Concrete prices across Albuquerque
Where you live changes the access, not the concrete. Tight lots in Downtown, Nob Hill & Wells Park need pumps and demolition; jobs in Rio Rancho & the West Side price near the city typical, with bigger driveways and easier truck access.
Downtown, Nob Hill & Wells Park
- 2-car driveway
- $2,550–$6,750 per 400 sq ft
- Plain slab
- $650–$1,400 / 100 sq ft of 4-in slab
Tight streets and alleys where a mixer truck cannot back up to the forms, so the crew pumps or wheelbarrows the concrete and bills for it. Sidewalk and curb-cut permits take longer here, and parking the truck can mean a street-use permit.
South Valley & International District
- 2-car driveway
- $2,400–$6,200 per 400 sq ft
- Plain slab
- $610–$1,250 / 100 sq ft of 4-in slab
A remodel-heavy area with a lot of cracked, heaved slabs from the mid-1900s. Removal and disposal are on most quotes here, so ask for them as their own line before comparing prices.
North Valley & Los Ranchos
- 2-car driveway
- $2,350–$5,850 per 400 sq ft
- Plain slab
- $600–$1,200 / 100 sq ft of 4-in slab
Residential streets with average pricing. Pouring the driveway and a walkway or patio in one visit is the easiest way to save here.
Rio Rancho & the West Side
- 2-car driveway
- $2,300–$5,950 per 400 sq ft
- Plain slab
- $580–$1,200 / 100 sq ft of 4-in slab
Newer subdivisions with HOA rules on driveway widening and finishes. Easy access keeps labor down; check what the HOA allows before paying for a stamped or colored finish.
Real-World Concrete Costs in Albuquerque
Here's what common concrete jobs cost in Albuquerque in 2026, labor, 4 in of 3,000–4,000 psi concrete, gravel base and forms included.
New 2-car driveway on a cleared lot — 2 to 3 days, 7 days before you park on it
Grade, 4 in of compacted gravel, forms, wire mesh, 5.5 yards of 4 in concrete, broom finish and control joints. Most Albuquerque driveways with truck access land here; a slope, a pump or 6 in with rebar pushes the bill toward $5,850.
Remove and replace a cracked 2-car driveway — 3 to 4 days
Breaking out and hauling 400 sq ft of old concrete runs $800–$2,800 (about 10 tons to the landfill at $90–$160 a ton), then the new pour at $2,350–$5,850. Reinforced old slabs cost more to cut up.
Stamped patio, 12 × 16 ft, one color and pattern — 1 to 2 days
The same patio in plain broom-finished concrete is $1,150–$2,450; stamping, color and sealer take it to $1,900–$3,450. Plan on resealing every 2–3 years at about $340–$865.
Garage slab, 24 × 24 ft, 4–6 in with rebar — 1 to 2 days
About 8 cubic yards of 4,000 psi concrete with a vapor barrier and a rebar grid, floated smooth. In Albuquerque that is $3,950–$8,400; a 6 in slab for a lift or a heavy truck prices at $8–$15 a square foot.
Shed slab or small parking pad, 10 × 12 ft — half a day
Small pours pay the most per square foot: $835–$1,650 for 120 sq ft works out to $6–$13 a square foot because the crew's setup and the ready-mix plant's short-load fee ($40–$110 a yard short) are spread over very little concrete.
How much does concrete cost in Albuquerque?
A 2-car driveway in Albuquerque costs $2,350 to $5,850. The middle of the market, about $3,700, covers excavation, a compacted gravel base, forms, wire mesh or rebar, 4 in of 3,000–4,000 psi concrete, a broom finish, control joints and curing. Removal of the old slab ($800–$2,800) and sealing ($340–$865) are extra lines.
Per square foot, that is about $5.88–$14.62. Bigger pours cost less per square foot: a 24 × 24 garage slab is $3,950–$8,400, while a 10 × 12 shed slab is $835–$1,650 because of contractor minimums and short-load fees. Prices re-checked against 20 sources in November 2026.
Concrete prices in Albuquerque (2026): driveways, slabs and finishes
A 2-car driveway costs $2,350–$5,850, a plain slab $6–$12 a square foot, and stamped concrete $10–$18 a square foot.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| 2-car driveway, 400 sq ft, 4 in, plain | $2,350 | $3,700 | $5,850 |
| Plain slab, 4 in, per sq ft | $6 | $9 | $12 |
| Stamped concrete, per sq ft | $10 | $14 | $18 |
| Patio, 12 × 16 ft, plain | $1,150 | $1,700 | $2,450 |
| Garage slab, 24 × 24 ft | $3,950 | $5,650 | $8,400 |
| Steps, 3–4 risers | $980 | $1,750 | $3,100 |
| Remove old concrete, per sq ft | $2 | $4 | $7 |
| Ready-mix, per cubic yard delivered | $125 | $155 | $195 |
Size cuts the rate. A 10 × 12 shed slab is $6–$13 a square foot in Albuquerque; a 24 × 24 garage slab is $6–$14. If you want a patio and a walkway too, pour them the same day as the driveway.
What moves a concrete quote in Albuquerque:
- What is being poured — plain 4 in flatwork is $6–$12 a square foot; 6 in with rebar $8–$15; stamped $10–$18.
- What is there now — removing old concrete runs $2–$7 a square foot, $800–$2,800 for a 2-car driveway, before any new work.
- Truck access — a pump truck for a back yard or a tight lot adds $490–$1,350; small pours pay a short-load fee of $40–$110 a yard.
- Base and site — a slope, soft soil or a first-time driveway means more excavation and gravel ($1–$3 a square foot for a 4 in base).
- Season — pours below 40°F need blankets and heat, and pours above 90°F need retarders and early starts; both add time and cost.
Ask every Albuquerque contractor the same six things: slab thickness, the psi of the mix, the base depth, rebar or mesh, whether removal and disposal are included, and who cuts the control joints. Compare those, not the headline price. Get a quote for your concrete job →
Concrete Cost in Albuquerque by Project Size
Shed slab, 10 × 12 ft: $835–$1,650. Patio, 12 × 16 ft: $1,150–$2,450. 2-car driveway, 20 × 20 ft: $2,350–$5,850. Garage slab, 24 × 24 ft: $3,950–$8,400. 3-car driveway, 24 × 36 ft: $5,200–$10,350, all plain 4 in concrete.
Worked example: a Albuquerque 2-car driveway, 400 sq ft, is about $3,700. Add a 4 × 50 ft walkway to the front door at $1,750 and a 12 × 16 patio at $1,700, poured the same day, and the job is roughly $7,150 for about 792 sq ft, which is why one combined quote costs less than three separate ones: the truck, the crew and the setup come once.
The rate falls as the pour grows. A 10 × 12 shed slab is $6–$13 a square foot, a 2-car driveway $5.88–$14.62, and a 3-car driveway ($5,200–$10,350 for 864 sq ft) $6–$11. Thickness moves it the other way: going from 4 in to 6 in with rebar takes a square foot from $6–$12 to $8–$15.
Albuquerque Concrete Costs by Finish and Type
| Finish or type | Cost | Best for |
|---|---|---|
| Plain concrete, broom finish | $6–$12 per sq ft | Driveways, garage floors, shed pads and plain patios. The cheapest finish and the easiest to repair. |
| Colored concrete (integral color) | $8–$13 per sq ft | Pigment mixed into the whole load, so chips and wear show the same color. Earth tones cost least; blues and greens most. |
| Exposed aggregate | $8–$14 per sq ft | Slip-resistant pool decks, walkways and driveways. The top of the slab is washed off to show the stone. |
| Stamped concrete | $10–$18 per sq ft | Patios, pool decks and front walks that should look like stone, slate or brick. Needs resealing every 2–3 years. |
| Stained concrete (existing slab) | $3–$10 per sq ft | Giving a sound existing patio or floor color without a new pour. Acid stain is mottled; water-based stain is more even. |
| Polished concrete (existing slab) | $3–$10 per sq ft | Garage, basement and interior floors ground to a shine. Not for driveways — polished surfaces are slippery when wet. |
| New slab, poured and polished | $9–$22 per sq ft | A finished interior floor in one project: the slab plus the grinding and polishing passes. |
| Resurfacing overlay | $3–$8 per sq ft | A sound slab with surface flaws. A thin cement overlay hides spalling and stains for a fraction of a tear-out. |
| Heavy-duty 6 in slab with rebar | $8–$15 per sq ft | RV pads, truck parking, workshops and anywhere a trailer or lift will sit. Half again as strong as a 4 in slab. |
Concrete price vs. what you pay — the Albuquerque driveway bill
Ready-mix concrete costs $125–$195 a cubic yard delivered in Albuquerque, and a cubic yard covers about 81 sq ft at 4 in, so a 400 sq ft driveway takes about 5.5 yards with waste and a thickened edge: $690–$1,050 of concrete inside a $2,350–$5,850 job. The difference pays for grading, a compacted gravel base, forms, steel, a crew of three or four for the pour, the finish, saw-cut joints and curing.
Labor is 40% to 55% of a flatwork bill, which is why prices differ by city while the concrete price barely moves. Where finishers earn more, a driveway costs more; the mix in the truck costs about the same in Albuquerque as it does two states away, give or take the plant's delivery radius.
What's included in an Albuquerque concrete quote (and what costs extra)
A standard driveway price covers grading, a compacted gravel base, forms, wire mesh or rebar, 4 in of concrete, a broom finish, control joints and curing. The headline price often leaves out:
- Removing the old concrete — $2–$7 a square foot; $800–$2,800 for a 2-car driveway
- Pump truck — $490–$1,350 when the mixer cannot reach the forms
- Decorative finish — stamped $10–$18 and exposed aggregate $8–$14 a square foot, against $6–$12 plain
- Sealing — $340–$865 for a 400 sq ft driveway, repeated every 2–3 years on decorative work
Ask for the thickness, psi, base depth and reinforcement in writing, and for proof of liability insurance.
Size, thickness and reinforcement
Plain 4 in concrete is $6–$12 a square foot in Albuquerque; 6 in with rebar for trucks and RVs is $8–$15. Adding a rebar grid to a 4 in slab costs $100–$290 per 100 sq ft. Small pours cost more per square foot than big ones.
Finish
Broom finish is the base price. Integral color is $8–$13 a square foot, exposed aggregate $8–$14, stamped $10–$18. Stamped work also needs resealing every 2–3 years.
What has to come out first
Removing old concrete is $2–$7 a square foot, or $800–$2,800 for a 2-car driveway, including hauling and landfill fees. Reinforced or 6 in slabs cost more to break up.
Access and pumping
If the mixer truck cannot reach the forms, a line or boom pump adds $490–$1,350 to the job. Jobs under about 4 cubic yards pay a short-load fee of $40–$110 a yard at the plant.
Local rules
New Mexico requires a Construction Industries Division license for contracting; only very small operators earning no more than $7,200 a year are exempt.
Labor rates in Albuquerque
Cement masons and concrete finishers in the Albuquerque metro earn a median $49,210 a year in federal wage data, about 14% below the US median. Labor is 40–55% of the bill, so Albuquerque prices land in line with the US typical of $3,800 for a 2-car driveway.
Season and weather
Concrete should not be poured on frozen ground or when the temperature will drop below 40°F in the next day without blankets and heaters, and hot days over 90°F need an early start and a retarder in the mix. In Albuquerque, the busy season books up weeks ahead, so get quotes early.
- Pour everything in one visit.A driveway, walkway and patio poured the same day share one setup, one truck and no short-load fee. Separately, a 10 × 12 slab alone costs $835–$1,650 in Albuquerque — $6–$13 a square foot.
- Keep the truck close.A pour the mixer can reach from the street avoids a $490–$1,350 pump charge. Move cars, open gates and clear the path before the crew arrives.
- Choose the finish by where it shows.Stamp or color the front walk and the patio ($10–$18 a square foot) and leave the driveway and side yard in plain broom finish ($6–$12).
- Do the demolition and hauling yourself only if you can.Removal is $2–$7 a square foot, but 400 sq ft of 4 in concrete weighs about 10 tons and landfills charge $90–$160 a ton. A rented jackhammer and a dumpster often cost close to the contractor's price.
- Book the shoulder season.Late spring and early fall are the rush in Albuquerque. Contractors with gaps in late fall or late winter — where the climate allows a pour above 40°F — often sharpen their price.
- Get the spec in writing.Two quotes can differ by $1,350 on the same driveway because one is 3.5 in thick with no base and no steel. Make both say 4 in, the psi, the base depth and the reinforcement.
Albuquerque contractors quote by the square foot or by the job. Before you pay a deposit, get these in writing:
- The area in square feet with dimensions, and the slab thickness (4 in for cars, 5–6 in for trucks and RVs)
- The concrete mix: psi (3,000 minimum outdoors; 3,500–4,000 with air entrainment where it freezes) and the number of cubic yards
- Base: excavation depth, inches of compacted gravel, and a vapor barrier under any garage or interior slab
- Reinforcement: wire mesh or rebar, bar size and spacing
- Removal and disposal of existing concrete as its own line, with landfill fees
- Finish (broom, stamped, exposed aggregate), color, sealer, and control joints — spacing and whether they are tooled or saw-cut
- Truck access, pump charge or short-load fee, and any permit, sidewalk or curb-cut fees (and who pulls the permit)
- Start date, pour date, cure time before you can park on it, payment stages, warranty and proof of insurance
How much does a concrete driveway cost in Albuquerque?
$2,350–$5,850 for a 2-car, 20 × 20 ft driveway, 4 in thick with a plain finish, and $3,700 is typical. Removing the old driveway first adds $800–$2,800; a stamped finish takes it to $4,000–$7,200.
How much does concrete cost per square foot in Albuquerque?
$6–$12 a square foot for a plain 4 in slab, installed. Six inches with rebar is $8–$15, exposed aggregate $8–$14, and stamped concrete $10–$18. Small pours cost more per square foot than large ones.
How much is a cubic yard of concrete in Albuquerque?
$125–$195 a cubic yard for 3,000–4,000 psi ready-mix, delivered. Orders under a full truck pay a short-load fee of about $40–$110 a yard short, and a cubic yard covers about 81 sq ft at 4 in thick.
How much does a concrete patio cost in Albuquerque?
$1,150–$2,450 for a plain 12 × 16 ft patio. Stamped, the same patio is $1,900–$3,450; in exposed aggregate $1,550–$2,700.
How much does a concrete slab cost in Albuquerque?
$6–$12 a square foot for plain 4 in flatwork. A 10 × 12 shed slab is $835–$1,650, a 24 × 24 garage slab $3,950–$8,400, and a monolithic slab foundation $6–$14 a square foot.
How much does it cost to remove concrete in Albuquerque?
$2–$7 a square foot including hauling and landfill fees, so $800–$2,800 for a 400 sq ft driveway and $385–$1,350 for a 12 × 16 patio. Reinforced or thick slabs cost more.
Do I need a permit or a licensed contractor for concrete work in New Mexico?
New Mexico requires a Construction Industries Division license for contracting; only very small operators earning no more than $7,200 a year are exempt.
How thick should a concrete driveway be?
Four inches of 3,000–4,000 psi concrete over 4 in of compacted gravel is the standard for cars. Go to 5–6 in with rebar ($8–$15 a square foot) for trucks, RVs or a trailer. Thicker edges where the driveway meets the street help too.
How long before I can drive on new concrete?
Walk on it after 24–48 hours, park a car after 7–10 days, and keep heavy trucks and RVs off for 30 days. Concrete reaches its design strength at about 28 days; seal it after that.
What's included in an Albuquerque concrete quote?
Grading, gravel base, forms, mesh or rebar, the concrete, a broom finish, control joints and curing. Often extra: removal of old concrete ($800–$2,800 for a driveway), a pump truck ($490–$1,350), decorative finishes and sealing ($340–$865).
Prices verified November 2026 · Cross-referenced against 20+ American pricing sources · See methodology
Prices for the Albuquerque metro area, November 2026. Outer suburbs may vary.
Get a fair concrete quote in Albuquerque
Local concrete contractors · Free quotes · No obligation, no spam.