How much does foundation repair cost in Albuquerque?
By Our research team · Last verified · Methodology
Most foundation repairs in Albuquerque cost $4,300–$18,500 for 6–8 piers under a settled slab or footing, and about $8,750 is what most homeowners here pay. A steel push pier is $955–$2,800 installed; lifting a sunken driveway or garage slab $475–$1,750.
How we get this data- Typical
- $8,750
- Low end
- $2,100
- High end
- $28,500
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local foundation repair contractors send you a real quote. Free, no obligation.
Get my fair quote →The typical Albuquerque price is $8,750, 8% below the US typical of $9,500.
Albuquerque's price band
Albuquerque is cheaper than 80% of the 195 US metros we price for foundation repair work.
Expect $4,300–$18,500 to stabilize a settled foundation in Albuquerque with 6–8 piers, and $8,750 is the going rate. Steel push piers cost $955–$2,800 each and helical piers $1,150–$2,950. Before you sign, a structural engineer's report runs $280–$1,350 and tells you how many piers you really need.
As a mid-size market, Albuquerque prices a 6–8 pier job about 8% below the US typical. Slabs on caliche and collapsible desert soils, with expansive clay in pockets. Settlement often follows a plumbing leak or irrigation soaking soil that was dry when the house was built, so the plumbing test and the drainage fix matter as much as the piers. Local pay matters too: construction laborers in New Mexico earn a median $38,400 a year (about 19% below the US median).
Piers and other structural foundation work need a building permit in most cities, and many want a structural engineer's letter with the application; crack sealing is often exempt. Licensing of foundation repair contractors varies by state, so check your state contractor board and ask for proof of liability insurance and workers' compensation. This is general information, not legal advice.
Comparing cities, or after the US-wide picture? See the national guide: Foundation repair cost in the USA.
$4,300–$18,500 for a typical foundation repair in Albuquerque — 6–8 piers installed under a settled slab or footing — typically $8,750. One pier runs $715–$2,300, a crack injection $235–$725, a bowing basement wall $3,850–$14,000, and a structural engineer's report $280–$1,350. Verified November 2026. Get free Albuquerque quotes →
- Typical repair, 6–8 piers: $4,300–$18,500 ($8,750 typical)
- Per pier: pressed concrete $330–$1,100; steel push $955–$2,800; helical $1,150–$2,950
- Crack injection $235–$725; slab lift $475–$1,750; bowing wall $3,850–$14,000
- Structural engineer's report $280–$1,350; independent inspection $375–$670
- Priciest area to work in: Downtown, Nob Hill & Wells Park; lowest quotes: Rio Rancho & the West Side
Prices verified November 2026 · Cross-referenced against 34+ American pricing sources · See methodology
Installed prices, labor and materials, for the Albuquerque metro, re-verified November 2026. Per-pier rows are for one pier; the typical job is 6–8 of them. Permits, structural engineer's reports and drainage are their own rows.
| Service | Low | Typical | High |
|---|---|---|---|
| Foundation repair, typical job: 6–8 piers installed under a settled slab or footingper job | $4,300per job | $8,750 | $18,500 |
| Steel push pier, driven to load-bearing soil, installedper pier | $955per pier | $1,400 | $2,800 |
| Helical pier (screw pile), installedper pier | $1,150per pier | $1,650 | $2,950 |
| Pressed concrete pile (common in Texas and Oklahoma), installedper pier | $330per pier | $545 | $1,100 |
| Pier & beam: crawl space pier or post replaced (block or concrete pad)per pier | $280per pier | $540 | $1,100 |
| Pier & beam house leveling: shim, adjust and re-level (5–10 piers)per job | $940per job | $1,950 | $3,150 |
| Pier & beam: new piers, sistered beams and re-level, whole houseper job | $3,800per job | $7,250 | $13,500 |
| Full perimeter underpinning, 15–20 piersper job | $11,000per job | $21,500 | $46,500 |
| Mudjacking (slab jacking), per 100 sq ft of slabper 100 sq ft | $285per 100 sq ft | $455 | $635 |
| Polyurethane foam lifting (polyjacking), per 100 sq ft of slabper 100 sq ft | $770per 100 sq ft | $1,400 | $2,350 |
| Lift one sunken slab section (garage, driveway or patio), typical jobper job | $475per job | $920 | $1,750 |
| Epoxy or polyurethane crack injection, one crackper crack | $235per crack | $455 | $725 |
| Carbon fiber strap on a bowing basement wallper strap | $335per strap | $560 | $930 |
| Wall anchor (plate anchor) or helical tiebackper anchor | $575per anchor | $930 | $1,850 |
| Bowing basement wall stabilized, one wallper wall | $3,850per wall | $7,450 | $14,000 |
| Sill plate or rim joist replaced (rot or termite damage), per 10 linear ftper 10 ft | $350per 10 ft | $700 | $1,350 |
| Floor joist sistered or replacedper joist | $330per joist | $540 | $900 |
| Sump pump with basin and discharge line, installedper job | $580per job | $1,250 | $2,350 |
| Interior drain tile (French drain) along a basement wall, per linear ftper linear ft | $45per linear ft | $75 | $110 |
| Basement waterproofing: interior drain, sump and vapor barrier, full perimeterper job | $3,800per job | $6,900 | $14,000 |
| Independent foundation inspection (not the contractor's free look)per visit | $375per visit | $540 | $670 |
| Structural engineer's inspection and written repair planper report | $280per report | $585 | $1,350 |
| Geotechnical soil report (borings and lab tests)per report | $470per report | $1,350 | $2,700 |
| Full foundation replacement (house lifted, new foundation poured)per home | $19,000per home | $41,500 | $92,000 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local foundation repair contractors in Albuquerque
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What's going on with your foundation?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the foundation repair contractors who reply.
Where should they text you?
- Max 2 foundation repair contractors. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched foundation repair contractors see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 foundation repair contractors about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Prices verified November 2026 · Cross-referenced against 34+ American pricing sources · See methodology
Prices cover the Albuquerque metro. Outlying towns can run a little lower; hand-dug access in Downtown, Nob Hill & Wells Park and South Valley & International District sits at the top of each range.
Foundation repair prices across Albuquerque
Where you live changes the access, not the pier. Hand-dug jobs in Downtown, Nob Hill & Wells Park take the longest; jobs in Rio Rancho & the West Side price near the city typical, with more piers per house.
Downtown, Nob Hill & Wells Park
- Typical job
- $4,650–$20,500 per job
- Per pier
- $770–$2,600 / pier installed
Dense blocks, older masonry and basements, and no room for a machine: piers and drains here are often dug and set by hand, which adds a day or two to a job. Permits and shoring are checked more closely on row houses and shared walls.
South Valley & International District
- Typical job
- $4,450–$19,500 per job
- Per pier
- $735–$2,450 / pier installed
Older bungalows and craftsman homes on crawl spaces and short piers. Re-leveling, sill plate and joist work are the common calls, and low crawl spaces add labor hours.
North Valley & Los Ranchos
- Typical job
- $4,300–$18,500 per job
- Per pier
- $715–$2,300 / pier installed
Residential streets with average pricing. A single sinking corner here is a 2–4 pier job, not a whole perimeter.
Rio Rancho & the West Side
- Typical job
- $4,300–$19,000 per job
- Per pier
- $715–$2,400 / pier installed
Newer tract homes with good access. The per-pier price is standard; the number of piers is what grows, since one settled side of a 2,500 sq ft home can need 10–14 of them.
Real-World Foundation Repair Costs in Albuquerque
Here's what common foundation repair jobs cost in Albuquerque in 2026, 6–8 piers installed, labor and materials.
One sinking corner, 2–4 piers — 1 day
Doors sticking and a stair-step crack in the brick on one corner. A crew digs 2–4 holes at the footing, drives steel push piers to load-bearing soil, lifts the corner and backfills. Most Albuquerque homes with one bad corner land here.
Typical settled slab, 6–8 piers — 1 to 3 days
One side of a slab home has dropped an inch or two. About $8,750 buys 6–8 piers, the lift, and a plan from the contractor; add $280–$1,350 for an independent structural engineer's report, which many Albuquerque buyers' lenders want to see at resale.
Sunken garage floor or driveway, lifted — half a day
A 360 sq ft garage slab is $1,050–$2,300 with mudjacking or $2,750–$8,450 with polyurethane foam; a 450 sq ft driveway $1,300–$2,850 and $3,450–$10,500. Fix the drainage first or the void comes back.
Bowing basement wall, one wall — 1 to 2 days
A 20–30 ft block wall bowed under 2 inches gets 6–8 carbon fiber straps ($2,000–$7,450); past 2 inches it gets 4–6 wall anchors ($2,300–$11,000) that are tightened over the following seasons. A wet wall adds an interior drain and sump ($3,800–$14,000).
Pier & beam home re-leveled, with one rotted joist and 10 ft of sill — 1 to 2 days
Shim and jack the floor back to level ($940–$3,150), sister one joist ($330–$900) and replace 10 ft of rotted sill plate ($350–$1,350). If the block piers have failed too, a whole-house rebuild is $3,800–$13,500.
How much does foundation repair cost in Albuquerque?
A typical foundation repair in Albuquerque costs $4,300 to $18,500. The middle of the market, about $8,750, buys 6–8 steel push piers installed, the lift, and the paperwork. Cracks ($235–$725), slab lifting ($475–$1,750) and re-leveling a crawl space home ($940–$3,150) are separate, smaller jobs.
Pier type moves the per-pier price more than anything else: a steel push pier is $955–$2,800 here, a helical pier $1,150–$2,950, and a pressed concrete pile $330–$1,100. Prices re-checked against 34 sources in November 2026.
Foundation repair prices in Albuquerque (2026): piers, slabs and basement walls
A typical 6–8 pier job costs $4,300–$18,500, one pier $715–$2,300, and a bowing basement wall $3,850–$14,000.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Foundation repair, 6–8 piers installed | $4,300 | $8,750 | $18,500 |
| Steel push pier, installed | $955 | $1,400 | $2,800 |
| Helical pier, installed | $1,150 | $1,650 | $2,950 |
| Pressed concrete pile, installed | $330 | $545 | $1,100 |
| Crack injection, one crack | $235 | $455 | $725 |
| Lift a sunken slab section (garage, driveway, patio) | $475 | $920 | $1,750 |
| Bowing basement wall, one wall | $3,850 | $7,450 | $14,000 |
| Structural engineer's inspection and report | $280 | $585 | $1,350 |
The steel is the cheap part. A pier's tube and bracket cost a few hundred dollars; the Albuquerque price of $715–$2,300 a pier is mostly a three-person crew, hydraulic equipment, digging at the footing by hand and the lifetime warranty behind it.
What moves a foundation repair quote in Albuquerque:
- Number of piers — one corner is 2–4 ($1,450–$9,200); one side 10–14 ($7,150–$32,000); the whole perimeter 15–20 ($11,000–$46,500).
- Pier type and depth — pressed concrete $330–$1,100, steel push $955–$2,800, helical $1,150–$2,950 per pier. Deep soft soil means longer piers and more time.
- Access — a machine in the yard is cheap; hand-digging at a footing under a deck, a porch or an addition is not.
- What caused it — a plumbing leak under the slab or bad drainage has to be fixed too, or the repair fails. A sump pump is $580–$2,350; interior drain tile $45–$110 a foot.
- Paperwork — a structural engineer's report ($280–$1,350) and a permit ($70–$140) add a little and protect you at resale.
Ask every Albuquerque company for the same five things: the number and type of piers, the depth they expect and what they do if they go deeper, what the lift will and won't fix inside, whether a plumbing test and a structural engineer's report are included, and the warranty's exact terms and transfer fee. Compare those, not the headline price. Get a quote for your foundation repair job →
Foundation Repair Cost in Albuquerque by Size of the Problem
One corner, 2–4 piers: $1,450–$9,200. One side, 6–8 piers: $4,300–$18,500. One long side or two corners, 10–14 piers: $7,150–$32,000. Full perimeter, 15–20 piers: $11,000–$46,500. Whole foundation replaced: $19,000–$92,000.
Worked example: a Albuquerque slab home with the garage side down about 1.5 inches. Seven steel push piers at $1,400 each come to $9,800; add a structural engineer's report at $585 and a permit at $105 and the job is about $10,490. A plumbing test before and after is often included; if not, budget a couple of hundred dollars.
The size of the house matters less than how much of it moved. A 1,200 sq ft home with every side settling can need 15–20 piers ($11,000–$46,500), while a 3,000 sq ft home with one bad corner needs 3 ($1,450–$9,200). That is why two neighbors with the same builder can get quotes $17,750 apart.
Albuquerque Foundation Repair Costs by Method
| Repair method | Cost | Best for |
|---|---|---|
| Steel push piers | $955–$2,800 per pier | Heavier homes on slabs and footings. Hydraulically driven to bedrock or dense soil, often 20–40 ft down, then the home is lifted on them. |
| Helical piers (screw piles) | $1,150–$2,950 per pier | Lighter structures, additions, porches and soft soils. Screwed in to a set torque, so the capacity is known on the day. |
| Pressed concrete piles | $330–$1,100 per pier | The budget option in Texas and Oklahoma clay: stacked concrete cylinders pressed to refusal. Cheap and quick, shallower than steel. |
| Pier & beam re-level (shims and jacks) | $940–$3,150 per job | Crawl space homes with sagging or sloped floors where the piers are sound. The fastest, cheapest leveling job there is. |
| Pier & beam rebuild (new piers, sistered beams) | $3,800–$13,500 per job | Older crawl space homes with rotted beams, failed block piers and a floor that has moved for years. |
| Mudjacking | $285–$635 per 100 sq ft | Sunken driveways, walks, patios and garage floors. Cement slurry pumped under the slab; lasts 5–10 years. |
| Polyurethane foam lifting | $770–$2,350 per 100 sq ft | The same slabs plus interior floors. Smaller holes, lighter fill, cured in minutes; costs more per square foot. |
| Crack injection (epoxy or polyurethane) | $235–$725 per crack | Non-moving cracks that leak or look bad. Not a fix for a wall or slab that is still moving. |
| Carbon fiber straps | $335–$930 per strap | Basement walls bowed under about 2 inches. Bonded to the wall every 4–5 ft, no digging outside; stops further movement. |
| Wall anchors or helical tiebacks | $575–$1,850 per anchor | Walls bowed 2 inches or more, where the wall can be pulled back over time. Needs yard room outside for the anchor. |
| Interior drain tile and sump | $3,800–$14,000 per job | Wet basements. A drain channel under the slab edge feeding a sump pump; the fix for water, not for structural movement. |
| Independent inspection or structural engineer's report | $375–$670 / $280–$1,350 | Before you sign a big quote, or when selling. A written opinion from someone who isn't selling piers. |
Pier price vs. what you pay — the Albuquerque foundation bill
A steel push pier is a galvanized steel tube, a bracket and a few bolts; the parts are a few hundred dollars. Installed in Albuquerque it is $955–$2,800, because the crew digs a hole at the footing by hand, bolts on the bracket, drives tube sections hydraulically until they hit load-bearing soil (often 20–40 ft down), then lifts the house on all the piers at once and backfills. A 6–8 pier job is one to three days for a crew of three or four.
That is why foundation prices follow local labor and soil, not the hardware. Where construction crews earn more and footings sit deeper, piers cost more. Where competition is heavy and pressed concrete piles reach refusal at 10–15 ft, as in Texas, the same job can cost half as much.
What's included in an Albuquerque foundation repair quote (and what costs extra)
A standard pier quote covers excavation at each pier, the pier and bracket, driving it to load-bearing soil, lifting and leveling, backfill, basic cleanup and the warranty. The headline price often leaves out:
- Structural engineer's report — $280–$1,350, needed for most permits and by many buyers
- Plumbing pressure test — before and after a slab lift, so a leak under the slab doesn't undo the job
- Drainage fixes — a sump pump is $580–$2,350; interior drain tile $45–$110 per foot
- Landscaping, concrete and interior repairs — shrubs, walkways and drywall cracks are rarely in the price
Ask whether the permit, the plumbing test and the structural engineer's letter are included, and get the warranty's transfer fee in writing.
How many piers
The pier count is the bill. In Albuquerque, 2–4 piers for one corner is $1,450–$9,200, 6–8 for a typical settled side $4,300–$18,500, and 15–20 for a full perimeter $11,000–$46,500. Get the count and spacing in writing.
Pier type
Pressed concrete piles are $330–$1,100 each, steel push piers $955–$2,800, helical piers $1,150–$2,950. Steel and helical reach deeper and carry a longer warranty; pressed concrete is the budget choice in clay country.
Soil and depth
Slabs on caliche and collapsible desert soils, with expansive clay in pockets. Settlement often follows a plumbing leak or irrigation soaking soil that was dry when the house was built, so the plumbing test and the drainage fix matter as much as the piers.
Foundation type
Slab homes get piers at the edge and foam or mudjacking inside. Crawl space homes get shims, new interior piers ($280–$1,100) and beam work ($3,800–$13,500 for a rebuild). Basements add wall straps ($335–$930 each), anchors ($575–$1,850) and drainage ($3,800–$14,000).
Local rules and licensing
Piers and other structural foundation work need a building permit in most cities, and many want a structural engineer's letter with the application; crack sealing is often exempt. Licensing of foundation repair contractors varies by state, so check your state contractor board and ask for proof of liability insurance and workers' compensation.
Labor rates in Albuquerque
Construction laborers in New Mexico earn a median $38,400 a year in federal wage data, about 19% below the US median. Labor and equipment time are most of the bill, so Albuquerque pier jobs land about 8% below the US typical of $9,500.
What else is broken
A leaking drain line under the slab, a downspout dumping at the footing or a tree pulling water from the clay has to be fixed, or the new piers hold up a house that keeps moving elsewhere. A sump pump is $580–$2,350; a plumbing pressure test is usually $70–$420 when it isn't included.
- Pay for an independent opinion first.A structural engineer's report is $280–$1,350 in Albuquerque and often cuts the pier count a salesperson proposed. It also gives you a plan three contractors can bid on the same way.
- Fix the water, not just the sinking.Gutters, downspout extensions and grading cost a few hundred dollars; a sump pump $580–$2,350. Piers under a house that keeps getting wet are money spent twice.
- Match the method to the problem.A hairline crack needs a $235–$725 injection, not piers. A wall bowed under 2 inches needs straps ($335–$930 each), not a $3,850–$14,000 wall rebuild.
- Get three quotes with the pier count in each.Two quotes can differ by $14,200 on the same house because one proposes twice the piers. Make every quote state the number, type, depth and spacing.
- Check the warranty's transfer terms.A lifetime transferable warranty is worth real money when you sell. Ask what it covers (settlement at the piers, or the whole slab), the transfer fee, and whether it dies if another company touches the foundation.
- Do slab lifting the cheap way where it fits.Mudjacking a sunken garage floor is $1,050–$2,300 against $2,750–$8,450 with foam. Foam lasts longer and lifts interior floors cleanly; mud is fine for a driveway.
Albuquerque foundation companies usually quote after a free inspection. Before you pay a deposit, get these in writing:
- The number of piers, their type (steel push, helical or pressed concrete), spacing, and where each one goes on a drawing of the house
- The depth they expect and what happens to the price if piers go deeper
- Whether the house will be lifted back toward level or only stabilized where it sits
- A plumbing pressure test before and after any lift, and who pays if a line is found leaking
- Whether a structural engineer's report and the permit are included
- Drainage work (gutters, grading, sump, drains) priced as its own lines
- The warranty: what it covers, how long, the transfer fee, and whether it is backed nationally
- Start and finish dates, payment stages, and who repairs landscaping and concrete afterward
How much does foundation repair cost in Albuquerque?
$4,300–$18,500 for a typical job of 6–8 piers installed, and $8,750 is typical. One pier is $715–$2,300; a crack injection $235–$725.
How much does one foundation pier cost in Albuquerque?
$715–$2,300 installed for the common blend of pier types. A pressed concrete pile is $330–$1,100, a steel push pier $955–$2,800, a helical pier $1,150–$2,950.
How much is pier and beam foundation repair in Albuquerque?
$940–$3,150 to shim and re-level a crawl space home whose piers are sound, $280–$1,100 per new interior pier, and $3,800–$13,500 to rebuild piers and beams under the whole house.
How much does it cost to lift a sunken concrete slab in Albuquerque?
$475–$1,750 for a typical garage, driveway or patio section. Mudjacking runs $285–$635 per 100 sq ft and polyurethane foam $770–$2,350.
How much does bowing basement wall repair cost in Albuquerque?
$3,850–$14,000 for one wall. Carbon fiber straps are $335–$930 each for walls bowed under 2 inches; wall anchors $575–$1,850 each for worse.
How much is a structural engineer's report in Albuquerque?
$280–$1,350 for an inspection and written repair plan; an independent (non-selling) inspection alone is $375–$670. Worth it before any quote over a few thousand dollars.
Does homeowners insurance cover foundation repair in New Mexico?
Usually not for settling, soil movement, drought or poor drainage, which standard policies exclude. Damage from a sudden covered event, such as a burst pipe, may be covered; earthquake and flood need separate policies. Ask your insurer before you sign anything.
Do I need a permit for foundation repair in Albuquerque?
For piers and structural work, usually yes, and many cities want a structural engineer's letter with the application. Permits in this guide's sources run $70–$140; crack sealing is often exempt. Piers and other structural foundation work need a building permit in most cities, and many want a structural engineer's letter with the application; crack sealing is often exempt.
How long does foundation repair take?
One to three days for a typical 6–8 pier job, a day for a slab lift or a few straps, and a week or more for a full perimeter or a basement wall with excavation. Lifting is done in one afternoon once the piers are in.
What's included in an Albuquerque foundation repair quote?
Excavation, the piers and brackets, driving, lifting, backfill and the warranty. Often extra: the structural engineer's report ($280–$1,350), the permit ($70–$140), drainage work, and repairs to landscaping and drywall.
Prices verified November 2026 · Cross-referenced against 34+ American pricing sources · See methodology
Prices for the Albuquerque metro area, November 2026. Outer suburbs may vary.
Get a fair foundation repair quote in Albuquerque
Local foundation repair contractors · Free quotes · No obligation, no spam.